Tannoy TS12 User Manual To The C1e1202e 53f6 4851 Aed6 Acd7f3484139
User Manual: Tannoy TS12 to the manual
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
the evolution revealed TS12 500W RMS 26Hz(-6dB) 15Hz 2 x line level phone 2 x XLR balanced 2 x XLR balanced (direct or 80Hz high pass) 2nd order low pass, 50Hz - 150Hz, -6dB After approximately 12 mins. in absence of input signal 300mm (12“) Closed box 22 litre / 0.78cu.ft Phase control Crossover defeat switch for LFE operation Soft limiting to avoid overload LF extension control 372 x 335 x 335mm 145/8 x 131/8 x 131/8” 12.5kg / 27.5 lbs 120V nominal AC~60Hz 230V nominal AC~50Hz 120V - T5AL / 250V 230V - T2.5AL / 250V 600VA Features Rigid cabinet, down-firing driver BASH® digital power amplifier Stereo line level inputs XLR input and output Direct or switched 80Hz high pass Auto power on and sleep function Soft-clip limiting Gain and phase controls & PERFORMANCE Output power Low frequency response Limit for usable output Inputs Outputs Input filter Auto mute Driver type Enclosure type Enclosure volume Additional features Enclosure (HxWxD) - including feet Enclosure weight Mains voltage Mains fuse Maximum power consumption & TS8 200W RMS 32Hz(-6dB) 18Hz 2 x line level phone 2 x XLR balanced 2 x XLR balanced (direct or 80Hz high pass) 2nd order low pass, 50Hz - 150Hz, -6dB After approximately 12 mins. in absence of input signal 200mm (8”) Closed box 12.5 litre / 0.45cu.ft Phase control Crossover defeat switch for LFE operation Soft limiting to avoid overload LF extension control TS10 300W RMS 29Hz(-6dB) 16Hz 2 x line level phone 2 x XLR balanced 2 x XLR balanced (direct or 80Hz high pass) 2nd order low pass, 50Hz - 150Hz, -6dB After approximately 12 mins. in absence of input signal 250mm (10”) Closed box 16.75 litre / 0.6cu.ft Phase control Crossover defeat switch for LFE operation Soft limiting to avoid overload LF extension control 292 x 280 x 255mm 111/2 x 111/2 x 10” 7.0kg / 15.4 lbs 120V nominal AC~60Hz 230V nominal AC~50Hz 120V - T2AL / 250V 230V - T1AL / 250V 323 x 286 x 286mm 121/16 x 115/16 x 115/16” 9.5kg / 21 lbs 120V nominal AC~60Hz 230V nominal AC~50Hz 120V - T3. 15AL / 250V 230V - T1.6AL / 250V 275VA 416VA TS8, TS10 & TS12 Professional Active Subwoofers Three powerful active subwoofers have been designed to complement the Reveal range of studio monitors for 2.1, 5.1, 7.2 configurations or in any other multi channel combination required. All are substantially constructed closed box cabinets with high power handling and long throw drive units delivering tightly controlled bass with massive impact; ensuring that the punch and drive of the mix track is faithfully reproduced. Reveal Frequency response (1) Recommended Amplifier Power Power Handling Average RMS Normal Impedance Sensitivity (3) Distortion Crossover Frequency Dispersion (@-6dB) DRIVE UNITS Drive Units - LF/MID WideBand™ HF Cabinet Type Construction Finish 66 60Hz-51kHZ 80 to 150W @ 8W 80W 6 92dB for 1W at 1m <0.6% 2.7kHz 90 degrees 2 x 165mm (61/2”) multi fibre paper pulp cone 25mm (1”) titanium dome neodymium magnet system Optimised bass-reflex loaded MDF cabinet and front baffle. Tongue and groove front and back Grey cabinet Maroon painted baffle Reveal 66 Passive centre channel reference monitor Optimised bass-reflex loaded cabinet with 40mm thick front baffle Two shielded 165mm (61/2”) woofers, multi fibre paper pulp cones Shielded 25mm (1”) titanium dome neodymium tweeter WideBand™ HF extended to 51kHz corrects phase response Whether you’re mixing for film, video or 5.1 audio formats, a dedicated centre-channel is a must. The Reveal 66 is designed to fit into your production environment with minimal visual obstruction while delivering the kind of performance demanded of a centre-channel speaker. Wide dynamic range, equal capability with vocal and music tracks and more than enough acoustic output make the Reveal 66 the perfect centre channel in any Reveal system. Reveal Frequency response (1) Recommended Amplifier Power Power Handling Average RMS Normal Impedance Sensitivity (3) Distortion Crossover Frequency Dispersion (@-6dB) DRIVE UNITS Drive Units - LF/MID WideBand™ HF Cabinet Type Construction Finish 6 63Hz-51kHZ 50 to 100W @ 8W 50W 6 90dB for 1W at 1m <0.6% 2.9kHz 90 degrees 165mm (61/2”) multi fibre paper pulp cone 25mm (1”) titanium dome neodymium magnet system Optimised bass-reflex loaded MDF cabinet and front baffle. Tongue and groove front and back Grey cabinet Maroon painted baffle Reveal 6 Passive nearfield reference monitor Optimised bass-reflex loaded cabinet with 40mm thick front baffle Shielded 165mm (61/2”) woofer, multi fibre paper pulp cone Shielded 25mm (1”) titanium dome neodymium tweeter WideBand™ HF extended to 51kHz corrects phase response The Reveal 6 combines all the heritage and purity of the original Reveal series with the very latest in technology. The result is a no-nonsense nearfield reference monitor with deep, punchy bass, clean and open mid-range and unrivalled vocal intelligibility. Combine the Reveal 6 with your preferred power amplifier and hear just how good a passive reference monitor can sound. Just because a speaker sounds great in one room doesn’t mean it will sound great in your studio. Room acoustics, speaker placement and monitoring distance play a great role in the way a speaker sounds. Until now there wasn’t much you could do about that without spending more money on expensive equalisers and a professional acoustician to place the speakers and tune them to the room. Tannoy’s exclusive Activ-Assist™ technology ensures that the great-sounding monitors we build will sound great where it matters; right there in your studio! It all starts with Activ-Assist™ software running on a PC/MAC with a sound card. The program automates the acoustic measurement process and allows you to measure the speakers in the room like a pro. Once the measurement is made the software calculates the right settings from over 2,000 potential choices. Tuning the speaker is as simple as setting the switches on the rear panel to match the graphic on the computer screen. In seconds your Reveal D monitors have been tuned and optimised for the room with the same degree of precision that is used in some of the world’s best recording studios. Activ-Assist™ software is available at no charge from www.tannoy.com for use with your own measurement microphone. A calibrated Tannoy measurement microphone is also available as an accessory from your local Tannoy dealer. Automated speaker measurement system for Reveal D studio monitors Recommends speaker EQ settings from 2,000 options Performs dual-channel FFT measurements of great precision Fool-proof on screen wizard-driven design Free software works with all Reveal D-series models 2nd RCA for SPDIF output for slaving a stereo pair RCA input for SPDIF with 75 Ohm terminating impedance Trim/Gain control (on SPDIF input - post DAC) over -10dB /- 4dBu range. Ref: 0dBu (0.775V) input for full rated output XLR / 1/2” jack combination connector for balanced input 10 Activ-Assist™ DIP switches control LF alignment mid/near/close field & half/quarter/eighth space compensation Digital input on / off 10 Activ-Assist™ DIP switches control mid band and HF shelving trim 3-way switch (post 2 channel DAC) selects SPDIF stream channel to be decoded - Left/Right/Mono Switch selection of 12dB/8ve 80Hz high pass filter for use with AV subwoofers SPEC NOTES : DIP switch ‘flat’ setting shown on the back panel artwork (1) +/- 3 dB, measured at 1m in an anechoic chamber. (2) Peak SPL at mix position for 1 pair driven Applications: (3) Average over specified bandwidth for half space environment Home studios/composition Project studios, users of PC/MAC DAW’s Professional recording, broadcast, post production studios & editing suites PERFORMANCE Frequency response (1) Max SPL (2) Distortion Dispersion @-6dB, 10kHz, horizontal DRIVE UNITS Drive Units – LF/MID WideBandTM HF ELECTRONIC SYSTEM Inputs 66D 49Hz-51kHZ 117dB <0.4% 90 degrees 2 x 165mm (61/2”) multi fibre paper pulp cone 25mm (1”) titanium dome, neodymium magnet system. 600 balanced XLR/Jack, SPDIF RCA SPDIF sampling rate 44.1 – 96kHz Input Sensitivity (0dBu = 0.775mV) -10dBu to +4dBu for a max SPL of 117dB Amplifier output power 100W LF / 50W HF Outputs SPDIF slave out RCA User Controls Front panel mounted on/standby/mute switch, multi-function LED, Rear panel mounted trim +6/-12dB, 80Hz high pass switch for AV use, 16-way Activ-AssistTM switch array Reveal 66D Active centre channel reference monitor with Active-Assist™ Optimised bass-reflex loaded cabinet with 40mm thick front baffle Two shielded 165mm (61/2”) woofers, multi fibre paper pulp cones Shielded 25mm (1”) titanium dome neodymium tweeter WideBandTM HF extended to 51kHz corrects phase response Active bi-amplification (100W LF / 50W HF) Putting together an active surround system? Look no further than the Reveal 66D as the ideal centre channel monitor. With its extended WideBand™ response, the R66D preserves the harmonic structure of recorded music and vocals; this results in a more natural and accurate reproduction of the original source. Ready to integrate with your analogue or digital production environment the R66D includes Tannoy’s Activ-Assist™ equalisation technology. PERFORMANCE Frequency response (1) Max SPL (2) Distortion Dispersion @-6dB, 10kHz, horizontal DRIVE UNITS Drive Units – LF/MID WideBandTM HF 8D 46Hz-51kHz 118dB <0.4% 90 degrees 200mm (8”) multi fibre paper pulp cone 25mm (1”) titanium dome, neodymium magnet system. ELECTRONIC SYSTEM Inputs 600 balanced XLR/Jack, SPDIF RCA SPDIF sampling rate 44.1 – 96kHz Input Sensitivity (0dBu = 0.775mV) -10dBu to +4dBu for a max SPL of 118dB Amplifier output power 120W LF / 60W HF Outputs SPDIF slave out RCA User Controls Front panel mounted on/standby/mute switch, multi-function LED, Rear panel mounted trim +6/-12dB, 80Hz high pass switch for AV use, 16-way Activ-AssistTM switch array Reveal 8D High power active near field reference monitor with Activ-Assist™ Optimised bass-reflex loaded cabinet with 40mm thick front baffle Shielded 200mm (8”) multi fibre paper pulp cone woofer Shielded 25mm (1”) titanium dome neodymium tweeter WideBandTM HF extended to 51kHz corrects phase response Active bi-amplification (120W LF / 60W HF) Tannoy Activ-Assist™ set-up software enabled Get the big, deep low-frequency performance of an 200mm (8”) woofer with the same purity and articulation of the rest of the Reveal range with the R8D. Combining 180 Watts of bi-amplification, with Activ-Assist™ equalisation technology and an SPDIF digital input, the R8D is ready for the most demanding applications. Classic Reveal performance with extended LF response and up to 118dB of power output makes the R8D the new standard for world-class nearfield monitoring applications. PERFORMANCE Frequency response (1) Max SPL (2) Distortion Dispersion @-6dB, 10kHz, horizontal DRIVE UNITS Drive Units – LF/MID WideBandTM HF 6D 60Hz-51kHZ 115dB <0.5% 90 degrees 165mm (61/2”) multi fibre paper pulp cone 25mm (1”) titanium dome, neodymium magnet system. ELECTRONIC SYSTEM Inputs 600 balanced XLR/1/4” jack Frequency response (1) 60Hz-51kHZ combination, SPDIF RCA Max SPL(2) 115dB SPDIF sampling rate Distortion < 0.5% 44.1 – 96kHz Input Sensitivity (0dBu = 0.775mV) -10dBu to +4dBu Dispersion (@-6dB) 90 degrees for a max 115dB Drive Units- LF/MID 165mm (6”) SPL multioffibre Amplifier output power / 35W HF paper75W pulpLFcone TM Outputs SPDIF out RCA 25mm (1”) slave titanium WideBand HF User Controls panel mounted domeFront neodymium on/standby/mute switch, multi-function LED, magnet system Rear Shielded Yespanel mounted trim +6/-12dB, 80Hz high pass switch for AV use, Electronic System 16-way Inputs 600ΩActiv-Assist balanced TM switch array XLR/Jack Reveal 6D SPDIF RCA ActiveSample near field reference monitor Activ-Assist™ SPDIF Rate 44.1 – with 96kHz Optimised bass-reflex loaded cabinetforwith 40mm thick front baffle Sensitivity 775mV 100W Shielded 165mm (61/2”) woofer, multi fibre paper pulp cone Shielded 25mm (1”) titanium dome neodymium tweeter WideBandTM HF extended to 51kHz corrects phase response Features: Active 40mm bi-amplification thick contoured (75W baffle LF / 35W HF) Driver lossy-coupled to cabinet A whole generation artists and producers have built their award-winning recordings 10 screw driverofchassis fixing on the original active; now the Reveal 6D takes nearfield monitoring to Flux controlReveal rings on LF drivers a new level. Incorporating Tannoy’s exclusive Activ-Assist™ technology allows you to tune the monitor to the room’s acoustics for an unparalleled sonic integration. Go ahead and connect it directly to the SPDIF output from Applications: your Home DAW, studios/composition or stay in the analogue Project studios, users of PC/MAC DAW’s Professional recording, broadcast, post production studios & editing suites PERFORMANCE Frequency response (1) Max SPL (2) Distortion Dispersion @-6dB, 10kHz, horizontal DRIVE UNITS Drive Units – LF/MID WideBandTM HF 5A 70Hz-30kHZ 109dB <0.7% 90 degrees 130mm (5”) multi fibre paper pulp cone 25mm (1”) soft dome, neodymium magnet system. ELECTRONIC SYSTEM Inputs 600 balanced XLR/1/4” jack combination Sensitivity 775mV for 40W Amplifier output power 40W LF / 20W HF User controls Front panel mounted on/standby/mute switch, multi-function LED, gain control Cabinet dimensions 298.8 x 271.5 x 184mm 3 (HxWxD exc. heatsink) 11 /4 x 103/4 x 71/4” Reveal 5A Active compact reference monitor Ultra high bandwidth response out to 30kHz Optimised bass-reflex loaded cabinet with 40mm thick front baffle Shielded 130mm (5”) woofer, multi fibre paper pulp cone Shielded 25mm (1”) soft dome neodymium tweeter Features: 40mm thick contoured baffle Whether building atostudio Driveryou’re lossy-coupled cabineton a budget, or you just need an active monitor with10a small the Reveal screwfootprint, driver chassis fixing5A is your choice. Built to the same high standard as the of therings Reveal line, the R5A packs performance, accuracy and value Fluxrest control on LF drivers into a compact enclosure that’s ready to share the desktop with the rest of your gear. Priced right for the beginner, the R5A delivers WideBand™ performance Applications:that will impress even the most seasoned pro. Home studios/composition Project studios, users of PC/MAC DAW’s Professional recording, broadcast, post production studios & editing suites The Antidote to Compromise Few if any manufacturers have the reputation and track record of Tannoy in the professional studio monitor market. Right from the emergence of the studio monitor itself as a product in the early 1940’s through the British invasion of the ‘60’s and every genre of music since then, Tannoy has been helping track, mix and master the hits. You don’t dominate a segment for over 60 years by cutting corners. You do it by staying true to your values; and letting others chase the latest fad or cheapest option. Considering the crucial role that monitors play in the production of audio programming we believe that this is one place in your signal chain where compromise is simply unacceptable. See and hear the Tannoy Reveal range at an authorized dealer near you and see for yourself why Reveal is truly the antidote to compromise. T: +44 (0) 1236 420199 F: +44 (0) 1236 428230 E: enquiries@tannoy.com Tannoy North America T: (519) 745 1158 F: (519) 745 2364 E: inquiries@tannoyna.com Tannoy Deutschland T: (04102) 888 393 F: (04102) 888 959 E: info@tannoy.com 6483 0944 Tannoy United Kingdom
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 12 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:55b1c96c-a2d1-11d9-b460-000393d66cda Producer : Acrobat Distiller 6.0 for Macintosh Modify Date : 2005:04:01 18:13:15+01:00 Creator Tool : FreeHand MX: pictwpstops filter 1.0 Create Date : 2005:04:01 18:01:38+01:00 Metadata Date : 2005:04:01 18:13:15+01:00 Document ID : uuid:d88f2da8-a2cf-11d9-9311-000393d66cda Format : application/pdf Creator : craig smith Title : Untitled-1 Author : craig smithEXIF Metadata provided by EXIF.tools