Targus 000030 2.4G Wireless Blue Trace Mouse User Manual

Targus Group International, Inc. 2.4G Wireless Blue Trace Mouse User Man OXM000030

a href="https://usermanual.wiki/Targus" itemprop="url"> Targus >

User Man_OXM000030

User Guide410-1688-001C / AMW50USN29531 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty de-tails and a list of our worldwide ofces, please visit www.targus.com. Features and specications are subject to change without notice. Microsoft, Windows and Win-dows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the U.S. and other countries. Logitech is a registered trademark of Logitech International in the United States and other countries. All trademarks and registered trade-marks are the property of their respective owners. ©2011 Targus Group International, Inc.WIRELESSBLUE TRACE MOUSE
Targus Wireless Blue Trace Mouse2Targus Wireless Blue Trace Mouse3IntroductionThank you for your purchase of the Targus Wireless Blue Trace Mouse. The USB receiver conveniently attaches to the mouse for ease of use while traveling or on the go. This is a plug and play device so no additional software is required.System RequirementsHardware• USB portOperating System • Microsoft Windows® 2000• Microsoft Windows® XP• Microsoft Windows Vista®• Microsoft Windows® 7• Mac OS® X 10.4 or laterContents• Targus Wireless Blue Trace Mouse• 2 x AA Batteries• Mini USB Receiver• User Guide1. Remove the battery cover from the top of the mouse by using the notch on the back. Carefully lift the cover up as shown in the diagram.Installing the Batteries2. Remove the battery safety clip by squeezing the center of the clip and sliding it back, towards the rear of the mouse. Lift up and rotate the clip out of the way.NOTE: THE BATTERY SAFETY CLIP WILL NEED TO BE IN THE SECURE, LOCKED POSITION BEFORE THE BATTERY COVER CAN BE PUT BACK IN PLACE.
Targus Wireless Blue Trace Mouse4Targus Wireless Blue Trace Mouse53. Insert two AA-size batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery compartment. 4. Replace the battery cover, carefully t the cover until it clicks into place.Establishing the Connection(A) Remove the USB receiver from the bottom of the mouse. (C) This mouse is a plug and play device. It will automatically operate when the USB receiver is connected to the computer.Low Battery Power IndicatorThe light illuminates from the seam between the left and right buttons. It will turn on when the power is low and batteries need to be replaced.(B) Plug the USB receiver into an available USB port on your computer.
Download:
Mirror Download [FCC.gov]
Document ID1511852
Application IDigmsMTaAjONubMK2jUqSEQ==
Document DescriptionUser Man_OXM000030
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize12.62kB (157784 bits)
Date Submitted2011-07-28 00:00:00
Date Available2011-07-28 00:00:00
Creation Date2011-06-29 14:07:43
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2011-07-26 11:35:11
Document TitleUser Man_OXM000030
Document CreatorAdobe InDesign CS4 (6.0)
FCC ID Filing: OXM000030

Navigation menu