Targus 000055 2.4 GHz Wireless Presenter User Manual Manual
Targus Group International, Inc. 2.4 GHz Wireless Presenter Manual
Targus >
Manual
Wireless Presenter with Laser Pointer USER GUIDE Visit our Website at www.targus.com Features and specifications subject to change without notice. © 2008 Targus Group International, Inc. and Targus, Inc. AMP16US (AMP03) / 410-1588-001A 30 AVOID EXPOSURE--HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS APERTURE. LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON’S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING. CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS DEVICE AND ITS ANTENNA(S) MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. YOUR DEVICE CONTAINS A LOW POWER TRANSMITTER. WHEN DEVICE IS TRANSMITTED IT SENDS OUT RADIO FREQUENCY (RF) SIGNAL. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. WIRELESS PRESENTER WITH LASER POINTER Introduction Congratulations on your purchase of the Targus wireless presenter with laser pointer. This combination presenter laser pointer features four control buttons that emulate the command keys in PowerPoint®. It offers true plug-and-play capability with no need for software drivers and the long range 2.4 GHz technology allows for effective presentations up to 33 feet (10 m). Contents • Wireless presenter with laser pointer • Ulitra-slim USB receiver • 1 x AAA battery • User guide System Requirements Hardware • USB interface Operating System • Microsoft Windows® 2000 • Microsoft Windows® XP • Microsoft Windows Vista® Wireless Presenter with Laser Pointer Setting Up Your Wireless Presenter Installing The Battery If the presenter is on, slide the on/off switch located on the side of the presenter to the “off” position. Battery Cover Insert the supplied battery, making sure the positive (+) and negative (-) ends of the battery match the polarity indicators inside the battery compartment. Slide the battery cover back into position until it “clicks” firmly into place. Turn on the presenter. Wireless Presenter with Laser Pointer Connecting The Receiver Plug the USB receiver into an open USB port on your computer. Your computer’s operating system will identify the receiver and install the default driver. Wireless Presenter with Laser Pointer Synchronizing Your Wireless Presenter The receiver and presenter should synch up automatically. However, in some cases they may not synchronize properly due to environmental interference or other causes. If this is the case, you must re-establish the link. Connect button Wireless Presenter with Laser Pointer Using Your Wireless Presenter Dark screen Next Page Laser button Escape / Resume Previous Page On/Off switch Connect button Wireless Presenter with Laser Pointer Safety Measures • To avoid possible eye damage, never point the presenter’s laser at people, especially their faces, or look directly into the presenter’s laser beam. • Avoid pointing the presenter’s laser beam at a mirror or other highly-reflective surface. • Keep the presenter away from young children. • Never view the presenter’s laser beam using telescopic devices, such as a microscope or binoculars. • Any attempt to disassemble, adjust or repair the presenter may result in exposure to laser light or other safety hazards. Troubleshooting What do I do if the response time of the presenter is slow or it intermittently stops working? • Make sure that the presenter is within 33 feet (10 m) of its receiver. • Increase the distance between the presenter’s receiver and the base units of other wireless devices. • Turn off any wireless devices and their base units that are near the presenter’s receiver. • Replace the battery. • Synchronize the receiver and presenter. See “Synchronizing Your Wireless Presenter” Wireless Presenter with Laser Pointer Technical Support For technical questions, please visit: US Australia New Zealand Internet: www.targus.com/support.asp Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645 Telephone: 0800-633-222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.asp. You will need to provide your full name, email address, country of residence and product information. Warranty Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to devices; nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights. Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Wireless Presenter with Laser Pointer FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna; • Increase the separation between the equipment and receiver; • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not authorized by the party responsible for compliance could void the user’s authority to operate this product. Declaration of Conformity Hereby, Targus, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All trademarks and registered trademarks are the property of their respective owners. All rights reserved. Features and specifications are subject to change without notice. © 2008. Targus Group International, Inc. and Targus, Inc., Anaheim, CA 92806 USA Product Specification Transmitter RF 2.400GHz-2.483GHz Battery Type AAA battery Effective RF Communication Range 10 meters max RF output power 1 mW max Power Consumption 30 mA max Receiver RF 2.400GHz-2.483GHz Interface USB 1.1 Power USB Bus Powered 5V DC 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Tagged PDF : No XMP Toolkit : 3.1-702 Instance ID : uuid:c23c033b-bbe8-4ca4-802c-e7e48b5827d1 Document ID : adobe:docid:indd:a1683e51-99b8-11dd-9a5a-dc42e9f8aa47 Rendition Class : proof:pdf Derived From Instance ID : 136d08f8-9352-11dd-bcee-ea5be1d6828e Derived From Document ID : adobe:docid:indd:4842a389-bff4-11dc-953b-c6283fe0b538 Create Date : 2008:10:28 16:14:40+08:00 Modify Date : 2008:10:28 16:17:10+08:00 Metadata Date : 2008:10:28 16:17:10+08:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8268 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 11 Creator : Adobe InDesign CS2 (4.0)EXIF Metadata provided by EXIF.tools