Targus 000080 Bluetooth V4.0 Dual-mode Dongle User Manual ACB10US1 UG AF8 060917 170726

Download:
Mirror Download [FCC.gov]
Document ID	3494013
Application ID	oARL4bFHj8mvaXpLhNQTvg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	122.92kB (1536486 bits)
Date Submitted	2017-08-03 00:00:00
Date Available	2018-01-31 00:00:00
Creation Date	2017-07-26 11:33:51
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-07-26 11:33:51
Document Title	ACB10US1-UG+AF8-060917_170726
Document Creator	Adobe Illustrator CS6 (Windows)

Bluetooth ® 4.0 Dual-Mode Micro USB Adapter
Introduction
Thank you for your purchase of the Targus Bluetooth 4.0 Dual-Mode Micro USB Adapter. This adapter enables your PC or laptop to
wirelessly connect to Bluetooth devices up to 10m away. It also allows you to connect up to seven Bluetooth devices including PDAs, smart
phones, keyboards, mice, printers, and other Bluetooth 1.1 / 1.2 / 2.0 / 2.1 compliant devices.
The adapter has built-in 128-bit encryption and authentication to enable secure connections between Bluetooth devices and installs easily
with Plug-and-Play convenience.
Contents
• Targus Bluetooth 4.0 Dual-Mode Micro USB Adapter
• Driver CD
• Qucik Start Guide
Data rate: Up to 3 Mbps
Class 2 Bluetooth adaptor
Supports Bluetooth Low-Energy (BLE) and
v1.1/1.2/2.0/2.1+EDR/4.0+EDR compliant devices
Working Distance : 10 meters in free space
System Requirements
• Windows® 10
• Windows® 8.1
• Windows® 8
• Windows® 7
• Windows Vista®
Adapter Installation
1. Insert the driver software CD into your computer’s
Basic Operations
To start Bluetooth
In the Windows system tray, right-click the Bluetooth icon
and select Start the Bluetooth Device / Turn Adapter On. The
Bluetooth icon is blue in color with a white insert when the
Bluetooth software is running.
To stop Bluetooth
In the Windows system tray, right-click the Bluetooth icon
Bluetooth icon is blue in color with a red insert when Bluetooth
is stopped.
Verifying the Adapter is Installed
After installing the adapter software :
1. Click Start/Control Panel/Hardware/Device Manager.
2. Check under ‘Bluetooth Radios’ that a ‘Broadcom BCM
20702 Bluetooth 4.0 USB device” is installed.
If the information is not present:
1. Unplug the adapter
2. Plug the adapter into the USB port to initiate the driver. Verify
that the adapter is installed.
optical drive.
2. Follow the on-screen instructions.
3. When the “Bluetooth Device Not Found” or “No
Bluetooth device was detected” window appears, insert
the USB Bluetooth adapter in the USB port.
Note: Do not connect the Adapter to your computer
until the software drivers are installed.
4. Follow the on-screen instructions then click Finish to
*update to version C with add windows 8.1
(08/21/14)
complete the installation.
If your computer does not have an optical drive, you
can download the latest driver from
http://www.targus.com/form/download.aspx?region=7&sku=ACB10US1
Bluetooth Tray
The Bluetooth tray resides in the Windows system tray, which is
normally located in the lower-right corner of the screen. The Bluetooth
tray provides fast access to most Bluetooth operations.
From the Bluetooth tray you can :
• Add a Bluetooth device: right-click the Bluetooth icon and
then select Add a Device.
• Show a Bluetooth device: right-click the Bluetooth icon and
then select Show Bluetooth Device.
Bluetooth icon, and then select Open Settings.
Targus product warranty does not cover any device or product that is not manufactured by Targus (including, but not limited to, laptops, smartphones, devices, or any other product
that may be used in connection with the Targus product). Australian customers: For complete warranty details see warranty statement enclosed.
Targus is a registered trademark of Targus International LLC in the U.S. and in certain other countries. Microsoft, Windows, and Windows Vista are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries. Broadcom and the Broadcom logo are trademarks of Broadcom Corp. Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc., U.S.A. and licensed to Broadcom Corp. All logos and registered trademarks are the property of their respective owners.
©2017 Targus, 1211 North Miller Street, Anaheim, CA 92806. All rights reserved.
Quick Start
410-2527-001E / ACB10US1
Bluetooth ® 4.0 Dual-Mode Micro USB Adapter
Technical Support
For technical questions, please visit:
US
Internet: http://targus.com/us/support
Australia
Internet: http://www.targus.com/au/support
Email: infoaust@targus.com
Telephone: 1800-641-645
New Zealand
Telephone: 0800-633-222
Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing it. Go to:
http://targus.com/us/product_registration
You will need to provide your full name, email address, country of residence and product information.
One Year Warranty
product warranty does not cover any device or product that is not manufactured by Targus (including, but not limited to, laptops, smartphones, devices, or
any other product that may be used in connection with the Targus product). Australian customers: For complete warranty details see warranty statement
enclosed.
Targus is a registered trademark of Targus International LLC in the U.S. and in certain other countries. Microsoft, Windows, and Windows Vista are registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Broadcom and the Broadcom logo are trademarks of
Broadcom Corp. Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc., U.S.A. and licensed to Broadcom Corp. All logos and
registered trademarks are the property of their respective owners. ©2017 Targus, 1211 North Miller Street, Anaheim, CA 92806. All rights reserved.
AUSTRALIAN AND NEW ZEALAND CONSUMERS ONLY
Thank you for your purchase. Targus warrants to the original purchaser that its products are free from defects in materials and workmanship, during
documentation provided with this Targus product. Targus’ Limited Product Warranty excludes damage caused by accident, neglect, abuse, misuse, improper
care, normal wear and tear, ownership transfer, or alteration. The limited warranty also excludes any product that is not manufactured by Targus (including,
without limitation, laptops, smartphones, devices, tablets, or any other non-Targus item) that is used in connection with the Targus product.
In the event that the Targus product has a defect in materials or workmanship Targus will, after receiving a warranty claim and inspecting the product, at its
discretion, do one of the following: repair, replace, or refund with the same or a similar product (or part) of no lesser quality and ship it to the original purchaser
at Targus’ expense. As part of this inspection, proof of purchase will be required. There is no charge for inspection. To make a warranty claim, please contact
Targus Australia or New Zealand (see details below), or return the product to the place of purchase. The original purchaser must bear the cost of the delivery
to Targus.
Under Australian and/or New Zealand Consumer Laws, in addition to any warranty Targus gives, our products come with guarantees that cannot be excluded.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are entitled to
have the products repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
For any warranty question, contact Targus Australia Pty. Ltd. (i) by mail at Suite 2, Level 8, 5 Rider Boulevard, Rhodes NSW 2138, by phone AUS 1800 641
645 or NZ 0800 633 222 or by Email: infoaust@targus.com. For additional information, check out our website at targus.com/au/warranty.
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
Tested to Comply
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
*update to version C with add windows 8.1
(08/21/14)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
interference by one or more of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Consult the dealer or an experienced radio/TV technician for help.
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate
the equipment.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. For body worn operation, this device has been tested and meets FCC RF exposure guidelines. When used with an accessory that contains metal may not
ensure compliance with FCC RF exposure guidelines.
Declaration of Conformity
Hereby, Targus, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
ID: B019364
(ACB10US1)
Quick Start
410-2527-001E / ACB10US1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Instance ID                     : uuid:2633c4d4-5d6f-4994-aad4-26dd63d92eb6
Original Document ID            : adobe:docid:indd:95af5f8c-5349-11dd-95cb-e156a12c9a54
Document ID                     : xmp.did:9C8D95F1B271E7118FABFEA51226EF96
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:9B8D95F1B271E7118FABFEA51226EF96
Derived From Document ID        : xmp.did:9B8D95F1B271E7118FABFEA51226EF96
Derived From Original Document ID: adobe:docid:indd:95af5f8c-5349-11dd-95cb-e156a12c9a54
Derived From Rendition Class    : proof:pdf
History Action                  : converted, saved, saved
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh), Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /, /
History When                    : 2017:06:09 10:45:02+08:00, 2017:07:26 11:33:37+08:00, 2017:07:26 11:33:46+08:00
History Instance ID             : xmp.iid:9B8D95F1B271E7118FABFEA51226EF96, xmp.iid:9C8D95F1B271E7118FABFEA51226EF96
Create Date                     : 2017:07:26 11:33:51+09:00
Modify Date                     : 2017:07:26 11:33:51+08:00
Metadata Date                   : 2017:07:26 11:33:51+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 88
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 10606 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : ACB10US1-UG+AF8-060917_170726
Producer                        : Adobe PDF library 10.01
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 229.999742
Max Page Size H                 : 317.000117
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, ArialUnicodeMS, HelveticaNeueLTStd-Lt, AkzidenzGroteskBE-Bold
Font Family                     : Arial, Arial Unicode MS, HelveticaNeueLTStd Lt, AkzidenzGroteskBE Bold
Font Face                       : Bold, Regular, Lt, Bold
Font Type                       : Open Type, Open Type, Unknown, Unknown
Font Version                    : Version 5.22, Version 1.01, Version 5.00, Version 5.00
Font Composite                  : False, False, False, False
Font File Name                  : arialbd.ttf, ARIALUNI.TTF, kaiu.ttf, kaiu.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black, Knockout white
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : Knockout white
Swatch Colorant Type            : SPOT
Swatch Colorant Tint            : 100.000000
Swatch Colorant Mode            : CMYK
Swatch Colorant Cyan            : 0.000000
Swatch Colorant Magenta         : 0.000000
Swatch Colorant Yellow          : 0.000000
Swatch Colorant Black           : 0.000000
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 16.0
For                             : wayne_yu,
Bounding Box                    : 0 -1027 652 899
Container Version               : 9
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools