Targus Laser Presentation Remote Amp13Us Users Manual
Targus Laser Pointer N2953 AMP13US_UG
AMP13US to the manual 0d522538-1862-4b35-8800-64df2f559c99
2015-02-04
: Targus Targus-Targus-Laser-Presentation-Remote-Amp13Us-Amp13Us-Users-Manual-389697 targus-targus-laser-presentation-remote-amp13us-amp13us-users-manual-389697 targus pdf
Open the PDF directly: View PDF 
.
Page Count: 7
User Guide
410-1681-001F / AMP13US
N2953
1 YEAR LIMITED WARRANTY: We pride ourselves
on the quality of our products. For complete warranty
details and a list of our worldwide offices, please visit
www.targus.com. Features and specications are sub-
ject to change without notice. Microsoft, Windows, Win-
dows Vista and PowerPoint are registered trademarks
or trademarks of Microsoft Corporation in the United
States and/or other countries. Mac and Keynote are
registered trademarks of Apple Inc., registered in the
U.S. and other countries. All trademarks and registered
trademarks are the property of their respective owners.
©2012 Targus Group International, Inc.
Targus Laser Presentation Remote Targus Laser Presentation Remote
2 3
Introduction
Thank you for your purchase of the Targus Laser Presentation Remote.
This combination remote with laser pointer, controls both Microsoft
PowerPoint® and Apple Keynote®. This cordless remote also offers true
plug and play capability with no need for software drivers, while long-
range 2.4 GHz technology allows for effective presentations up to 50 feet
(15 m).
System Requirements
Hardware
• USB port
Operating System
• Microsoft Windows® 2000
• Microsoft Windows® XP
• Microsoft Windows Vista®
• Microsoft Windows® 7
• Microsoft Windows® 8
• Mac OS® X 10.4 to 10.8
Contents
• Targus Laser Presentation Remote
• Mini USB Receiver
• 1 x AAA Battery
• User Guide
Setting Up Your Remote
Installing the Battery
Press the battery cover release button to open the battery cover and
carefully lift the cover as shown.
Battery
cover
Insert the supplied battery, making sure the positive (+) and negative
(-) end of the battery match the polarity indicators inside the battery
compartment.
Battery cover
release button
Targus Laser Presentation Remote Targus Laser Presentation Remote
4 5
Remove the mini USB receiver stored inside the center compartment.
Slide the battery cover back into position until it “clicks” rmly into place.
Using Your Remote
PC PowerPoint®
Mac KeyNote®
Mac PowerPoint®
Before using the remote, please select your computer type and preferred
presentation software. Locate the switch inside the battery compartment
as shown.
NOTE: SELECT “PC POWERPOINT” IF YOU USE A COMPUTER MADE BY:
HP/COMPAQ, DELL, TOSHIBA, GATEWAY, PANASONIC, FUJITSU, SONY,
IBM/LENOVO, ACER, ASUS, ETC.
Targus Laser Presentation Remote Targus Laser Presentation Remote
6 7
This remote is a plug and play device. It will automatically operate when the
USB receiver is connected to the computer. Plug the mini USB receiver into
any available USB port on your computer.
Turn on the remote by pressing and holding the On/Off power button for 3
seconds.
Keys and Functions
1
2
3
4
5
6
7
8
9
Targus Laser Presentation Remote Targus Laser Presentation Remote
8 9
1Power button
Press and hold for 3 seconds to turn on the remote.LED
ring will turn green.
Press and hold for 3 seconds to turn off the remote.LED
ring will shut off.
2Blank screen button The screen will become blank/dark.
3Slide show
Start - Press once to begin.
Stop - Press and hold for 2 seconds to stop the slide
show.
4Page Forward/Next slide Press once to go to next slide.
5Page
Backward/Previous slide Press once to go back one slide.
6Laser pointer Laser light is emitted from the opening.
7LED light ring Power and KeyLockTM indicator.
8KeyLock button
Press once to enable KeyLock function.
- Disables all keys except the laser, page forward/next
slide and page backward/previous slide buttons.
- LED ring will become RED.
Press once to disable the KeyLock function.
- LED ring will return to GREEN.
9Laser pointer button Press and hold to activate the laser pointer.
Safety Measures
• To avoid possible eye damage, never point the remote’s laser at people,
especially their faces, or look directly into the remote’s laser beam.
• Avoid pointing the remote’s laser beam at a mirror or other highly-reective
surface.
• Keep the remote away from young children.
• Never view the remote’s laser beam using telescopic devices, such as a
microscope or binoculars.
• Any attempt to disassemble, adjust or repair the remote may result in exposure
to laser light or other safety hazards.
Troubleshooting
What do I do if the response time of the remote is slow or it intermittently
stops working?
• Make sure that the remote is within 50 feet (15 m) of the mini USB receiver and
computer.
• Increase the distance between the remote’s receiver and the base units of other
wireless devices.
• Turn off any wireless devices and their base units that are near the remote’s
receiver.
• Replace the battery.
Targus Laser Presentation Remote Targus Laser Presentation Remote
10 11
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
Technical Support
For technical questions, please visit:
Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing
it. Go to:
http://www.targus.com/registration.asp
You will need to provide your full name, email address, country of residence and
product information.
US Internet: www.targus.com/support.asp
Australia Internet: www.targus.com/au
Email: infoaust@targus.com
Telephone: 1800-641-645
New Zealand Telephone: 0800-633-222
One Year Warranty
1. Targus warrants to the original purchaser that its products are free from defects in materials
and workmanship for one year. This warranty is limited to defects, materials and workmanship.
2. The benets to the consumer given by the warranty are in addition to other rights and
remedies of the consumer under law in relation to the goods to which the warranty relates. 3.
The warranty is given by (i) Targus Australia, (ii) Targus Australia’s business address is: 117-119
Bowden Street, Meadowbank, NSW 2114 Australia, (iii) Targus Australia’s telephone number is
1800 641 645, Email: infoaust@targus.com (iv) To make a warranty claim for goods purchased
in New Zealand, the telephone number is: 0800 633 222, or the goods may be returned to
the supplier in New Zealand. 4. What the purchaser must do to entitle the purchaser to claim
warranty:- (i) The purchaser must call the telephone number for Australia or New Zealand set
out above, (ii) The purchaser must provide the purchaser’s name, daytime contact number,
business hours delivery address, the Targus model number on the product, date and place
of purchase with receipt for purchase if required, and describe the fault condition. 5. What
Targus must do:- (i) Targus will provide the purchaser with store return information or a return
authorisation so that the purchaser may return the product for warranty inspection, (ii) If after
inspection Targus nds the product is defective in materials or workmanship, Targus shall
replace (or repair) the defective product at the discretion of Targus and ship the product from
Targus warehouse at its expense within three business days (Monday to Friday excluding public
holidays) of receiving the returned goods. If the product is no longer available Targus reserves
the right to replace with the nearest corresponding product of no lesser quality, (iii) Targus will
bear the cost of return delivery to the purchaser regardless of the inspection test result. The
purchaser must bear the cost of the delivery to Targus. There is no charge for inspection. 6.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any
other reasonable foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure. 7. Please note: (i) Features and specications of all Targus products are subject to
change without notication, (ii) In some instances: Goods presented for repair may be replaced
by refurbished goods of the same type rather than being repaired. Refurbished parts may be
used to repair the goods, (iii) If goods accepted for repair retain user-generated data: During
the process of repair some or all of your stored data may be lost. Please ensure that you have
saved this data elsewhere prior to repair.
Targus Laser Presentation Remote Targus Laser Presentation Remote
12 13
AVOID EXPOSURE — HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS
APERTURE.
LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS. CLASS 2 LASER PRODUCT.
NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY,
AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE
FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A
PERSON’S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT
OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME
MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY
SUCH AS DRIVING.
CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
THIS DEVICE AND ITS ANTENNA(S) MUST NOT BE CO-LOCATED OR OPERATING IN
CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. YOUR DEVICE CONTAINS
A LOW POWER TRANSMITTER. WHEN DEVICE IS TRANSMITTED IT SENDS OUT RADIO
FREQUENCY (RF) SIGNAL. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE
THE EQUIPMENT.
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not authorized by the party responsible for compliance
could void the user’s authority to operate this product.
Declaration of Conformity
Hereby, Targus, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. All trademarks and registered trademarks are the property of their respective owners.
All rights reserved. Features and specications are subject to change without notice. © 2012. Targus Group International,
Inc. and Targus, Inc., Anaheim, CA 92806 USA
