| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2103729 |
| Application ID | C7DtDmj1j5vRshJHweJ4uA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 133.92kB (1673943 bits) |
| Date Submitted | 2013-10-28 00:00:00 |
| Date Available | 2014-04-27 00:00:00 |
| Creation Date | 2013-08-07 14:33:56 |
| Producing Software | Adobe Acrobat 8.1 Image Conversion Plug-in |
| Document Lastmod | 2013-08-07 14:34:31 |
| Document Title | User manual |
| Document Creator | Adobe Acrobat 8.1 |
WAP-74 0 Video Bridge
QUiCk Start GUide >>Base Installation
You can use Video Bridge without base
or insert the base placed upright at the bottom
or Insert the base side Of the WAP for hOI’IZO 18‘ placement
- i
1 Video Bridge 2 Base x2 3 Ethernet Cable x2 4 Adapter x2
WA 410 Hardware t up A
0 Plug the power cord into DC.
AP STATION
>> Controls and Connectors
Front Panel indicators
Power: This light illuminates when WAP-7410 has DC in.
W-LAN: This light Illuminates when WAP-7410 is connected to
the wireless network. The LED flashes when the WAP-7410 is IE]
actively sending or receiving data over the wireless network. ,7
0 WPS: if your router supports Wi—Fi Protected Setup and uses \f
WPA or WPA2 security, then you can use Wi-Fi Protected
Setup to automatically connect the WAP-7410. 0 0mm“ "‘3 Ethernet cab'e-
STATION
AP
0 Signal strength: Off - low signal strength
Medium - normal signal etrenglh HUB PC
Bright . strong signal strength \
t R t M
0 Network Active: This light illuminates when the attached exp—HE" M fig)
device is connected to the network. The LED flashes when
Ethernet LAN Cable
the deviceis actively sending or receiving data over the
Ethernet port.
Ste
E “ '
Rear Panel .
WAP-7410 Onlckly P g
0 DC IN
If Set-Top»Box needs to reboot at the same time as setting up WAP. please complete the WAP pairing process
0 Reset to Default (Step2 & 3). before checking connectivity.
o WPS o Press WPS on both WAP-7410 wid'iin 2 seconds for pairing process.
AP STA110N
X\!Y¥
0 During the WPS pairing, the WPS LED will blink constantly.
Secure connection will be automatically established within less then 2 minutes.
WAF-7410 Pairing Configuration
A. Setting to WAF as Access Point =
1. Boot up WAP and wait for approximately 45 seconds.
2. Open web browser (Using Firefox as an example)
3. Enter IP address on the address bar (Default IP will be given in
Chapter 0)
Enter IP address
4. Login window will appear after entering the correct IP of WAP.
Enter correct “Usemame" and 'Passwoid" and then click LOGIN
(Default Usemame and password will be given in Chapter C)
TTI
Client Login
Usemame '
Password '
El
5. Choose "Wireless" from category "Config" on left panel.
® Device Model = Access Point (At least one WAP should be set as
Access Point)
® Wireless Band = 802.11N_5GHZ(Fixed)
® ESSID = Could be set as any name. but should be set as same
name while pairing two WAPs.
® scs . Disable
© Channel = Should choose same channel while pairing two WAPs.
Encryption : NONE-OPEN
® Click “Save' button.
6. Choose “Networking' from category ‘Config" on left panel.
@Choose 'DHCP" model.
® Click “Save" button.
CONFIG — NETWORKING
®w . 5......
mm...»
swam
communion)
w.....m....... oozsaemwsr
a... on Is as m 9. s.
M we at...
Win-Kl
11mm
and
B. Reset to Default:
(1) Perform a factory reset via Web GUI.
(2) Press and hold the reset button for 5 sec.
The function will depend on the state of WAP,
a. WAF is set to AP. this function will reset default with AP setting.
b. WAF is set to ST, this function will reset default with ST setting.
1. At Web GUI. Choose”Restore"
TTI
um- STATUS - DEVICE
om.
wmss Dwumrri: auxmznnzwnusmsnta
Wm... .2... it...
3:55 .-
WM... mt...“ mm. [laminnrsinl
wild...
Nmmino
was
Mass
Lag
Amnn
GE
um...
Recent
owning
an...
2. 'Restore all configuration files to factory default and reboot”.
Click 'YES'
mm... .
m2 imam
rri
m . mi.
...s (tannin-annual 136
w AIS
mom;
[cs- ‘[ me i
TTI
m TOOLS - RESTORE
9....
Wm Rssmreallmviliguimonlilastolatiuydelaulsandimont’l :—
Networking
woe
MESS
Plsmretcmguimcnhleslo gunman... mmninipsemgsr ivzs
Mn...
rim-mug
woe
mass
mm
me...
warm:
mm
C. Setting up to WA? as Station :
1. Boot up another WAP device and wait for approximately 45 seconds.
2. Open web browser.
3. Enter lP address on the address bar (Default IP will be given in
Chapter C)
«
Enter IP address
& a o s g e 9.-.
4. Login window will appear after entering the correct IP of WAP
Enter correct "Usemame' and ‘Password” and then click LOGIN.
(Default Usemame and Password will be given in Chapter C)
TTI
Client Login
Usernarrie’
Pa
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
Encryption : Standard V2.3 (128-bit)
User Access : Print, Extract, Print high-res
XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date : 2013:08:07 14:34:31+08:00
Create Date : 2013:08:07 14:33:56+08:00
Metadata Date : 2013:08:07 14:34:31+08:00
Creator Tool : Adobe Acrobat 8.1
Format : application/pdf
Document ID : uuid:9861af3c-bf18-465c-aab4-799694740fcf
Instance ID : uuid:7871f083-1a4f-4cbf-bd6b-04b45d83acbe
Producer : Adobe Acrobat 8.1 Image Conversion Plug-in
Page Count : 2
Creator : Adobe Acrobat 8.1
EXIF Metadata provided by EXIF.tools