Tatung AWD209T Wireless 2.1 Stereo Headphone User Manual UserMan

Tatung Company Wireless 2.1 Stereo Headphone UserMan

UserMan

2.4GHZ DIGITAL WIRELESS STEREO HEADPHONESOWNER’S MANUALAWD209
RISK OF ELECTRIC SHOCK. DO NOT OPEN.CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualied service personnel.Product InformationKeep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the model number in case you need it. These numbers are located on the product. Model No.: _____________________________________________________________________Purchase Date: _________________________________________________________________Dealer/Address/Phone: __________________________________________________________WARNING: To reduce the risk of re or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing. No objects lled with liquids, such as vases, shall be placed on the apparatus.Important Safety Instructions1.  Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.10.Unplug this apparatus during lightning storms or when unused for long periods of time.11. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.FCC InformationFCC Regulations state that unauthorized changes or modications to this equipment may void the user’s authority to operate it.This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.Im p o r t a n t  In f o r m a t I o nIndustry Canada Regulatory InformationOperation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.The user is cautioned that this device should be used only as specied within this manual to meet RF exposure requirements. Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure conditions.This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
In t r o d u c t I o n3WelcomeCongratulations on your purchase of the 2.4GHz Wireless Stereo Headphones with True 2.1 Sound. The AWD209 uses the latest in wireless transmission, 2.4GHz digital technology, that lets you enjoy crystal clear, uncompressed digital audio up to 100 feet away from the transmitter. The headphones also offer a true 2.1 stereo listening experience, with a patented dual-speaker design in each ear cup. The headphones' compact design and comfortable ear cups let you enjoy music and TV sound just about anywhere inside or outside your home. Easy, push-button pairing makes it simple to get started, wirelessly.This manual covers various connection options and detailed operating instructions for setup and use of the AR wireless headphones. If, after having reviewed the instructions, you have any questions, please call toll-free 1-800-732-6866 or visit www.araccessories.com.2.4GHz Digital technology lets you enjoy crystal clear audio wirelessly up to 100 feet away from the transmitter, with no line-of-sight limitations*True 2.1 stereo, with patented dual-speaker design in each cupConvenient power, volume and tuning controls located on headphonesEasy pairing of transmitter and headphones*Range may vary according to environment. Features
Ge t t I n G  St a r t e d4Supplied AccessoriesThis headphone system includes accessories that enable you to use your wireless headphone set in a number of ways. Stereo Y adapter cable  (RCA/3.5 mm plugsv)AC power adapter Stereo cable (3.5 mm plugs)Wireless headphones2.4GHz wireless transmitterTo charge the headset unit: 1.  Plug the at end of the AC adapter into the power jack on the bottom of the right headphone.2.  Plug the other end of the AC adapter into a wall outlet. Important: This power unit is intended to be correctly oriented in a vertical or oor mount position.Charging the HeadsetBefore using your headphones for the rst time, charge them for 3.5 hours using the supplied AC power adapter.While the headphones are charging, the LED on the right headphone remains red. This LED and the headphones turn off when the headphones are fully charged.
Ge t t I n G  St a r t e d5Hooking Up the TransmitterThe 2.4GHz wireless transmitter works with a wide variety of audio sources, from portable MP3 players to A/V receivers to DVD players or gaming systems. The way you hook it up depends on the kind of output you want to use on your audio source.LINK DC IN LINE INTransmitter (back panel)Audio source: MP3 player, CD player, others. 3.5mm cableConnecting to a 3.5mm mini-jack output1.  Plug the 3.5mm cable into the headphone jack on your audio source. 2.  Connect the other end of the 3.5mm cable to the LINE IN jack on the transmitter’s back panel.Connecting to stereo RCA outputs1.  Connect the red and white plugs of the stereo Y adapter cable to the audio source's line out jacks—make sure you match the plug colors with the jack colors (red to red, white to white).2.  Connect the other end of the stereo Y adapter cable to the LINE IN jack on the transmitter's back panel.LINK DC IN LINE INTransmitter (back panel)Y-adapter cable
Ge t t I n G  St a r t e d6To plug in the transmitter:1.  Connect the round end of the AC power adapter to the DC IN power supply jack on the transmitter’s back panel.2.  Plug the adapter into an electrical outlet.Important: This power unit is intended to be correctly oriented in a vertical or oor mount position.LINK DC IN LINE INTransmitter (back panel)AC power adapterLINK DC IN LINE INTransmitter (back panel)LINE IN jack connects to your audio sourceDC IN jack connects to the AC power adapterLINK button tunes the transmitter and headphonesPowering the TransmitterThe 2.4GHz wireless transmitter runs on regular AC power.Bu t t o n S  & Ja c k S
Bu t t o n S  & Ja c k S7Volume up/down buttons increase or decrease the headphone volumeLink button tunes the headphones to the transmitterRight headphoneLED indicates charging (red) and communication with transmitter (blue)Power button turns the headphones on and off
uS I n G  Y o u r  H e a d p H o n e S8Turning the Headphones On1.  Make sure the transmitter is plugged in and connected to an audio source.LINK DC IN LINE INPower button2.  Press the power button on the right headphone to turn the headphones on.3.  Switch on the audio source (TV, DVD, CD player, etc.) the transmitter is connected to. If your audio source is a DVD or CD player, start a disc.4.  Simultaneously press the link buttons on the headphones and on the back of the transmitter. The headphones and transmitter lock onto each other for wireless transmission. The LED on the headphones ashes while the devices are tuning; it stays on once the devices are tuned.5.  Adjust the volume using the volume up and down buttons on the right earphone.Link buttonsTurning the Headphones OffTo turn the headphones off: Press and hold the power button on the headphones for 3 seconds. Don't forget to unplug the transmitter too!To make sure that your headphones are ready to use at all times, plug them in when you're not using them so that they can recharge.
uS I n G  Y o u r  H e a d p H o n e S9Reset buttonResetting the HeadphonesIf you ever want to return the headphones to their factory presets, simply reset the headphones by triggering the reset button on the right headphone with a paper clip.Important Note About Audio OutputsIf possible, use a xed-level (or line-level) audio output from your audio source. This kind of output provides a consistent level of audio that doesn’t change when you adjust the source’s volume control.Fixed-level audio outputs from stereo receivers/amps are typically designated as tape or VCR audio output connections, sometimes marked on the component as ‘TAPE OUTPUT,’ ‘TAPE OUT,’ ‘TAPE REC, or ‘TAPE RECORD or REC OUT.’ Fixed-level outputs from TVs are usually marked as ‘Constant,’ ‘Fixed,’ or ‘Select.’ If they are not marked as such, they are probably variable outputs (see “About Variable-Level Audio Outputs” below). Outputs from DVD players are almost always xed.Important: Jacks labeled CD, DVD/DVR, PHONO, or tape playback (PB) are INPUTS and will not work with the transmitter.Variable‑Level Audio OutputsA variable-level output, such as a headphone jack or certain RCA-type outputs, provides an audio signal that changes with the volume level set on the audio source. As the volume of the audio source is adjusted up and down, so is the audio signal strength sent to the transmitter. This can affect the quality of sound generated by the headphones, and may require an adjustment of the volume level of the audio source to produce a signal strong enough for the transmitter.Hints: • On most bookshelf-type or compact stereo systems, inserting a headphone plug into the headphone jack results in automatic cutoff of the regular, or hard-wired speakers.
10• Most TVs, regardless of age or price, have variable outputs. If you are unsure which of your TV audio outputs is xed, refer to the TV instruction manual. Some TVs have outputs that can switch between variable and xed. When given a choice, xed is always recommended.Listen safely!Enjoy your headphones at a safe volume. Avoid or limit the amount of time you listen at higher volumes—permanent hearing loss may occur if the headphone is used at too high a volume. If you experience a ringing in your ears, or your own voice and other sounds seem mufed, stop using the headphones and consult a hearing professional.Battery lifeDue to the chemistry of the headphones’ rechargeable battery, required charging time may increase while the actual capacity of the battery may decrease. If you have any questions regarding the replacement of the built-in battery, please call toll-free 1-800-732-6866 or visit www.araccessories.com.The following troubleshooting guide takes you through some of the more common problems associated with the installation and/or operation of a wireless system. If the problem persists, please call toll-free 1-800-732-6866 or visit www.araccessories.com.The headphones can be reset as well. If you experience persistent problems with the headphones, see page 9 for reset instructions.•    Make sure the transmitter’s power adapter is fully inserted into the wall outlet and the power cord from the AC adapter is rmly connected to the transmitter power input jack.•    Check that the audio source component (stereo, TV, etc.) is turned on and transmitting sound as it normally should. If you’re using a PC or DVD player, make sure you’ve selected the correct audio output and that the sound is not muted.No sounduS I n G  Y o u r  H e a d p H o n e Str o u B l e S H o o t I n G
tr o u B l e S H o o t I n G11•    Conrm that the headphones are turned on (the LED is blue) and tuned to the transmitter. If the LED on the right headphone is ashing blue, the headphones are not tuned to the transmitter. Press the link key on the headphones and on the transmitter’s back panel to tune the headphones.•    Check that the headphone volume is turned up.•    If you’re using a variable output audio source (like a headphone jack or variable output on a TV set), make sure the source component’s volume is set high enough for the transmitter to detect. •    If you are using a Tape 2 Monitor output from your receiver/amp as the audio output, check that you have pressed the Tape Monitor/Tape 2 button on the front of the receiver. This will turn on the Tape 2 outputs, which may not have been active.Interrupted sound•    Move closer to the transmitter with the headphones on. Sending the signal through certain materials, such as glass, tile, and metal, can decrease the effective transmitting distance of the system.•    Make sure the headphones are charged and that the transmitter is properly connected to the audio source. Then, move the headphones close to the transmitter and press the headphone power button again.LEDs fail to light up•    Check the LED on the right headphone. If it’s blinking, you’ve lost the transmitter’s signal. Move closer to the transmitter. If you don’t see the LED, the headphones’ rechargeable battery needs to be recharged. Use the AC adapter to recharge the headphones.Headphones shut off automatically
12 Month Limited WarrantyAudiovox Electronics Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product along with any accessories included in the original packaging is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specication of defect(s), transportation prepaid, to the Company at the address shown below. Do not return this product to the Retailer.This Warranty is not transferable and does not cover product purchased, serviced or used outside the  United  States  or  Canada.  The  warranty  does  not  extend  to  the  elimination  of  externally generated static or noise, to costs incurred for the  installation, removal or  reinstallation of the product. The warranty does not apply to any product or part thereof which, in the opinion of the company,  has  suffered  or  been damaged  through  alteration, improper installation, mishandling, misuse, neglect, accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter not provided with the product, or by leaving non-rechargeable batteries in the product while plugged into an AC outlet.  THE  EXTENT  OF  THE  COMPANY’S  LIABILITY UNDER  THIS  WARRANTY IS  LIMITED  TO  THE  REPAIR  OR REPLACEMENT PROVIDED ABOVE  AND,  IN  NO  EVENT,  SHALL  THE  COMPANY’S LIABILITY  EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.This  Warranty is  in  lieu  of  all  other  express warranties or  liabilities. ANY  IMPLIED  WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED  TO DURATION OF THIS  WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM  THE  DATE  OF  ORIGINAL  PURCHASE.    IN  NO CASE  SHALL  THE  COMPANY  BE  LIABLE  FOR  ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specic legal rights and you may also have other rights which vary from state/province to state/province.USA:  Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, NY 11788CANADA:  Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16,  Mississauga, Ontario  L5T 3A5© 2008 Audiovox Accessories Corporation 111 Congressional Blvd., Suite 350 Carmel, IN 46032 USAwww.araccessories.comAWD209_US_IB_00Trademark(s) RegisteredAll other brands and product names are trademarks or registered trademarks of their respective owners.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –  Reorient or relocate the receiving antenna. –  Increase the separation between the equipment and receiver. –  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –  Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu