Tatung KL1S PC USB Headset User Manual X KL1 NB Y KL 1S7S 20071004 ai

Tatung Company PC USB Headset X KL1 NB Y KL 1S7S 20071004 ai

Users Manual

Certification and safety approvals Unique FeaturesSpecificationProduct AccessoriesUser Guide SymbolsWarranty CardScope of WarrantySoundJet warrants that products of its own manufacture purchased from any SoundJet authorized distributor will meet the applicabl e SoundJet product specifications and be free from all defects in material and workmanship for the following periods from the date of purchase: Headset One(1) YearOther Accessories (other than headset) One(1) YearSoundJet's obligation under this warranty is limited to, at SoundJet's option, either:(a) repairing; or (b) replacing the product and accessories on an exchange basis. The warranty for such repaired or replaced the product and accessories will be valid for the remaining warranty period applicable for the original product and accessories.How To Get Warranty ServiceReturn the product and accessories to the outlet from which the product and accessories were purchased. All warranty claims must be presented within the applicable warranty periods above and accompanied by a valid proof-of-purchase.Warranty Exclusions and limitationsThis warranty shall not apply to:defects or damage resulting from use of the product and accessories in other than their normal and customary manner, eg, in excess of their maximum specifications or operating instructions;defects or damage form misuse, accident, neglect, improper testing, installation, alteration or modification of any kind, or spillage of food or liquid.installation, maintenance or repair performed by service personnel not authorized by SoundJet;products and accessories which have had the serial/identification numbers removed or made illegible;all plastic surfaces and all other externally exposed parts that are scratched or damaged due to customer normal use;operation or damage caused by ancillary or peripheral equipment not manufactured by SoundJet but used in conjunction with or accompanying the product and accessories.any other defects or faults which occur for reasons beyond the reasonable control of SoundJet.1 2 374PC USB Dongle * 1pcWarranty Card * 1pcUser Guide * 1pcPC USB Wireless Headset * 1pcParts Introduction 5 Pair / Pick Up / Hang UpDC-IN PortPower On/OffVOL+ / VO L-LED IndicatorMicrophone123456756713426PC 105oOnMicWireless TechnologyListen Time (per charge)Standby TimeCharge Time (full charge)Distance of UseHeadset WeightUSB Dongle WeightCharging MethodBattery TypeHeadset SpeakerFrequency ResponseAudio QualityDistortion (T.H.D.)ModelMicrophoneReceives voice input when the microphone is swit ched on.DC-IN PortConnect the cable Connect the DC-IN cable from for recharging. LED IndicatorA red indicator represents power functions.A green indicator represents signal connections.VOL+ / VOL-Press to increase the headset volume.Press to decrease the headset volume.1234567PC PC USB HeadsetMaximum Range:Results may vary according to environment.PC USB HeadsetUnique 2.0-Channel design - Each ear cup contains specially designed speaker driver to deliver extra audio clarity.USB Plug-and-Play wireless headset that supports PC music/game sounds and back-channel voice simultaneously, no need to switch back and forth.USB Dongle(Transmitter) direct plug-in to the PC for instant use of VoIP, on-line game, DVD, and all kinds of entertainment running Windows 2000/XP,Vista.Ease of use, no software installation needed.Long standing use, up to 6 hours of continuous listening time per charge.Easy charging through dongle DC out.Microphone switch on/off control.30 to 45 feet distance for effective use.Pair / Pick Up / Hang UpPress pair button to connect the wireless headset and the USB Dongle.Answer---Press pair button to answer the callHang up---Press pair button to end the calldongleKL-1SKL-1S is the world first digital wireless headset that delivers high quality 2.0-channel stereo audio with extra sound clarity and soft, deep bass effects. It provides a voice back channel that allows you to talk in conjunction with any kinds of PC voice applications. Examples of such applications include Skype, MSN, on-line gaming, and more. With the high performance audio and the unique feature set, KL-1S brings you a great value. To start, we like to introduce to you the important certification and safety approvals on this headset. KL-1SKL-1S Steady red lightSteady green lightFlashing green lightDevices are waiting for pairingDevices are pairedThe headset is chargingDevices are not pairedWiStereoTM for advanced 2-way digital transmission in the 2.4 GHz frequency bandUp to 6 hoursApproximately 3 monthsApproximately 2.5 hours30 ~ 45 feet 4.7 ounces1.8 ouncesThrough Dongle DC OutLithium Polymer 40mm Neodymium20Hz~20,000Hz(perfect for all music, game, and voice)Uncompressed audio for music (CD-quality) and voice (extra clarity)<0.08% (professional grade audio performance)
Handling the headset Do not bend, drop, crush, puncture, incinerate, or open the headset.Repairing the headsetNever attempt to repair the headset yourself. The headset does not contain any user serviceable parts. For service information, choose the headset help from the warranty card. The rechargeable battery in the headset should be replaced only by authorized service providers. Important User Information1181213Getting StartedGetting StartedPress PAIR button to connect the signal transmission. Devices are pairedTurn on/off the headsetPairing the headset to the USB Dongle10Devices are waiting for pairingConnect the USB Dongle PC PC 9To ensure this headset to work properly, please avoid recharging while using.PC ChargingChargingPlug in to chargeUnplug the USB charging cable if any of the following conditions existThe USB cable or plug has become frayed or damaged.The USB cable has been exposed to rain, liquids, or excessive moisture.You suspect the headset needs service or repair.You want to clean the headset.Avoiding hearing damage Permanent hearing loss may occur if a headset is used at high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected.Hearing experts suggest that to protect your hearing:Limit the amount of time you use the headset at high volume.Avoid turning up the volume to block out noisy surroundings.Turn down the volume if you can't hear people speaking near you.Maintaining battery lifeDue to the physical nature of battery, the charging time may become longer and the actual capacity of battery may decrease. If you have any questions regarding the replacement of the built-in battery, please contact our service center.15Troubleshooting 14USB PortPortDC OutFirst time use : Charge 4 hours before using the headset.Regular use : Charge the headset approximately 2 hours if the battery was completely used up.The headset is chargingConnect the USB Dongle with PC for signal transmission.To ensure this headset to work properly, please avoid recharging while using.Steady red light is turned off when the headset is fully charged.USB PortNo signal connection to the headset Make sure the headset is charged and the USB Dongle is properly connected to the PC. Within the range of signal coverage, power on the headset again. The headset is automatically switched offThe battery is too low. The indicator light on the headset is off. Unexpected behaviorReset the headset. (see p.5 )No audio at the headsetCheck the headset and the computer volume control. Make sure they are not in the lowest volume level or muted.Check the pair status of the USB Dongle and the headset. Make sure two devices are paired properly. Check if the PC Media Player is properly installed, and audio file is playable.The listening party can not hear you over the internet. Check if the microphone switch is on. FCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.--Consult the dealer or an experienced radio/TV technician for help."CEThis Product is CE marked according to the provisions of R& TTE Directive. (99/5/EC)Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.RF exposure warning · The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu