Tatung SWM1000R SoundStation Wireless Receiver User Manual

Tatung Company SoundStation Wireless Receiver Users Manual

Users Manual

SoundStation ® Wireless Microphone Quick Start GuideSoundStation®Wireless Microphone Quick Start GuideParts ListThe Polycom SoundStation Wireless Microphones connect to your SoundStation VTX 1000 or SoundStation IP 6000 , allowing you to wirelessly reinforce the audio pick-up range during conference calls.The following items are included in your SoundStation Wireless Microphone package. If you are missing any items, contact your SoundStation Wireless Microphone reseller.Wireless Microphone Power AdapterCharging CradleWireless Receiver Cohesive Tape(Not shown: Country-Specifi c Power Cable)For use with SoundStation® VTX 1000 or SoundStation® IP 6000
SoundStation ® Wireless Microphone Quick Start GuideFeaturesMute / Unmute LEDMute / Pair key Power on/off switchBattery doorPair / Power LED Recess for Charging PINConnecting the Receiver to the Conferencing PhoneTo connect the receiver, plug the RJ9 cable (attached to the receiver) into the microphone port on your SoundStation console. Your SoundStation will detect the receiver and confi gure it for use automatically. 213Cohesive TapeCable link to external microphone portPair KeyReceiver Status LEDWireless Receiverarrows should be pointing to the outside rim of the phone console that is opposite to the dial pad
SoundStation ® Wireless Microphone Quick Start GuideCharging the Wireless MicrophoneTo charge the batteries in the microphones:1. Place the wireless microphone onto the charging pins in one of the Charging Cradle microphone slots. Make sure the Charging Cradle is plugged into an electrical outlet.While using the charging cradle, the Pair / Power LED on the wireless microphone appears red. Once charging completes, the Pair / Power LED turns to green. Note:Polycom recommends that wireless microphones be fully charged (LED turns from red to green) before you use them the fi rst time.StartupTo turn on the wireless microphone (once it is fully charged), press and hold Mute key for at least fi ve seconds until the Microphone Pair / Power LED fl ashes green. The Microphone Pair / Power LED and the Receiver Status LED will appear solid green when the microphone is turned on and there is a radio link between the receiver and the microphone. If the Pair / Power LED appears fl ashing green, the microphone and the receiver may not be paired or there may be other issues. For the enjoyment of best voice quality, the optimum distance for the wireless microphones with respect to the conference phone is highly suggested to be within 32 feet (10 meters) range.Documentation and support are available at www.polycom.com/support/voice/ .Charging pinCharging pin2. Plug the power adapter onto the wireless microphone.

Navigation menu