Tatung TIH-F1500 Induction Cooker User Manual

Tatung Company Induction Cooker TIHF1500HU IM

a href="https://usermanual.wiki/Tatung" itemprop="url"> Tatung >

Users Manual

INDUCTION COOKER TIH-F1500SU Instruction Manual 1 Control Panel TIH-F1500HU 1Part Identification
2 Model No. TIH-F1500HU Voltage / Frequency 120V,60Hz Rated Wattage 1500W  Do not allow the main cable to touch hot surface.  Do not pull the cable across sharp edges.  Do not use the cable to carry the appliance.  Always unplug the appliance after use or if the set is faulty.  Keep children away from the appliance.  Ensure that the main power voltage corresponds to the voltage of the appliance.  To protect against fire, electric shock and personal injury, do not immerse cord, plug or appliance in water or other liquids.  Never leave the appliance unattended when it is in operation.  Do not operate this appliance with a damaged cord / plug or has been damaged in any manner.  Do not use pans with inferior materials.  Always place appliance on a flat and sturdy surface.  When moving appliance, do not touch hot surfaces, or avoid spilling hot liquids over it.  The appliance must not be placed on, or near any hot surfaces.  Do not put the appliance near a washbasin.  Do not clean the appliance under a running tap water. GENERAL SAFETY PRECAUTIONSSPECIFICATIONS 3 If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn, some cleaners can produce noxious fumes if applied to a hot surface. Operation Test  Use a pan that is suitable for induction cooking; having a bottom diameter of at least 12 cm. Put some water in the pan and place it at the center of the heating zone.  Press “On/Off” function. The buzzer will sound once and all the LED lights are on for one second and turn off. The “On/Off” light will turn on.  Press the “temp level” function for a minute.  The water will be heated up.  Take the pan away from the heating zone.  The buzzer will sound once.  Place the pan back on the heating zone. The heating process will continue.  Turn off the induction cooker by pressing “On/Off” function. The heating process will stop and the indicator light will blink. If the induction cooker remains off after pressing the “On/Off” function, check the following:  Is the induction cooker connected to the power outlet?  Has the induction cooker been switched on?  Is a suitable pan being used for induction cooker (12-26 cm)? Is it made of suitable material?  Is the pan being placed at the center of the heating zone? Cooking Process The illuminated indicator light means that the energy is being transferred to the pan. The power rating can be changed by pressing the touch control key. The inductive power transmission depends on the power rating. OPERATING INSTRUCTIONS
4When the heating level is changed by pressing the control key, the food is immediately exposed to different temperature. Do NOT PUT EMPTY PANS on the heating zone. First, put oil or liquid into the pan and then start cooking by pressing the control key. The heating level can be adjusted to different cooking mode. The pan should always remain in the center of the heating zone during cooking; otherwise the bottom of the pan will be heated up unequally and the food in the pan may be burnt. While heating up oil, constantly check the pan to prevent overheating and burning. Operation (1) press any function to active the cooker, the cooker will auto detect the if cookware is proper within 30seconds. （2）if no cookware or cookware material is not proper, the buzzer will sound per 0.2S and the first LED display level light will flash the cooker will auto switch off and change to stand by mode if no cookware or cookware material is not proper after 30seconds, （3）if put proper cookware within 30seconds, the cooker will start to heating. （4）warm level, temperature and turbo function can be active at any working mode. warm function: Press warm level”button to active warm function, the warm level indicator light on and the correspond warm level "140F" LED light will on, the default warm level will be set at 140F, 5 total 3 warm level can be select during this function ,you can press + or - key to adjust warm level at 140F,158F and 176F. Turbo function Press "turbo”button to active turbo function,the cooker will heating with max power for 3 minutue and then will turn to warm level function automatic. temperature level function: Press temperature level”button to active temperature function, the temperaure level indicator light on and the correspond temperature level LED light will on, the default warm level will be set at 374F, total 5 warm level can be select during this function ,you can press + or - key to adjust warm level at 320F,338F,356 374F and 392F. Protection: If there is no cooking utensil on the cooking zone or if it is not suitable for induction cooking, the first LED level light will flash”. Temperature protection: If the insulated gate bipolar transistor’s (IGBT) temperature is too high, the cooker will switch itself OFF. The buzzer will sound and the second LED level light will flash. Lower / higher voltage protection: If the local voltage is lower than 95 V, the fourth led level light will flash”. When it is more than 140 V, the third LED level light will flash Sensor detector: If the main sensor detects any disconnection or short circuit, the fifth LED led level light will flash.
Download:
Mirror Download [FCC.gov]
Document ID2625972
Application IDeRSM9SFbA870ikhQiuO5gQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize10.84kB (135470 bits)
Date Submitted2015-05-27 00:00:00
Date Available2015-05-27 00:00:00
Creation Date2015-05-21 20:18:06
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2015-05-25 21:05:11
Document TitleMicrosoft Word - TIHF1500HU IM
Document CreatorPScript5.dll Version 5.2.2
Document Author: DELL
FCC ID Filing: BJM-TIH-F1500

Navigation menu