USERS MANUAL
Thank you for purchasing the Tatung Tablet PC. In addition to having the typical
characteristics of a mobile computer, this product also comes with wireless connectivity
and digital handwriting and speech recognition functions, providing the user with
convenient ways to instantaneously share and communicate information, regardless of time
or place. Moreover, this Tablet PC also includes special features like a battery hot swap
function, an easy-to-operate push-button layout, and fingerprint recognition. This User
Manual will explain how to use your Tablet PC and provide important guidelines.
Preface Tablet PC
AC Adaptor
Accessory Checklist.............................................................. 01
Standard Accessories.................................................................... 01
Optional Accessories..................................................................... 01
Safety Guidelines..................................................................... 02
Safety Information.......................................................................... 02
Safety and Regulatory Information................................................ 02
Safety Guidelines for Using the Power Cord and Power Supply..... 03
Battery Safety Guidelines.............................................................. 04
Mercury Battery Warning............................................................... 04
Operating Specifications................................................................ 04
Introduction of the Tablet PC .............................................. 05
Functions........................................................................................ 05
Exterior........................................................................................... 06
Diagrams of Each Surface............................................................. 06
Explanation of Indicators............................................................... 07
How to Use the Tablet PC..................................................... 08
Introduction of Function Buttons That Can be Used After Entering
Windows........................................................................................... 08
Basic Functions............................................................................. 09
Secondary Functions..................................................................... 10
Battery............................................................................................. 12
How to Charge the Battery............................................................. 12
How to Replace the Battery............................................................13
Battery Charging Time................................................................... 13
How to Save Electricity.................................................................. 14
How to Prolong the Battery Life......................................................15
Battery Hot Swap.......................................................................... 15
Table of Contents
AC Adaptor
Use and Setup of the Fingerprint Recognition
Device (depends on model).............................................................16
How to Register to Use the Fingerprint Recognition Device............ 18
How to Set Up Fingerprint Recognition for Login............................ 18
How to Use Fingerprint Recognition to Increase File Access
Confidentiality................................................................................ 18
Calibrating the Stylus...................................................................... 20
Adjusting the Screen Brightness.................................................... 21
Adjusting the Screen Orientation................................................... 22
How to Connect to External Projectors and Monitors.................... 23
TTAB-910/TTAB-B10 Setup........................................................... 23
TTAB-510 Setup............................................................................ 23
Upgrading Your Tablet PC............................................................... 25
Upgrading the Memory................................................................... 25
How to Change the Hard Drive....................................................... 26
How to Recover Your Operating System......................................... 26
How to Use the Recovery CD......................................................... 26
Contacting Technical Support......................................................... 27
Contacting the Manufacturer...........................................................27
Calling For Assistance................................................................... 27
Declaration of Conformity (Safety Standards) ................ 28
Appendices ................................................................................ 29
Pointers for Using the Operating System ...................................... 29
Tutorials............................................................................................ 30
Help and Support............................................................................... 30
Using Your Accessories.................................................................. 31
How to Use the Stylus Tether............................................................. 31
How to Change the Stylus Tip........................................................ 31
Maintaining the LCD Display........................................................... 32
LCD Display Maintenance Guidelines........................................... 32
Tablet PC
AC Adaptor
01
AC Adaptor
Accessory Checklist
Standard Accessories (depends on model and configuration)
Standard Lithium Battery
Stylus
Stylus Tether
Mini VGA Connecting Cable
Power Cord
AC Adapter
Cleaning Cloth
Microsoft Windows XP Tablet PC Edition Introductory Guide
Optional Accessories
Docking Station
USB Keyboard
USB Mouse
Long-life Lithium Battery
Battery Charger
Memory Module
Recovery CD
Slipcover
Handgrip
Carrying Bag
02
Safety Guidelines Tablet PC
Safety Information
Please pay attention to the following two symbols that appear in the User Manual. Each
symbol is followed by important, useful information that will help you use your Tablet PC.
Warning This symbol warns of incorrect usage of equipment and/or a violation
of the instructions for usage that could damage your machine or impair
its performance.
Attention This symbol marks advice that will help you get better results when
using your Tablet PC.
Safety and Regulatory Information
When moving the Tablet PC, do not drop it.
Do not dismantle the outer casing, especially during system startup. Any type of
dismantling will damage the system, and the manufacturer will not be
held responsible.
Using an incorrect memory module may damage the system.
If the battery is replaced incorrectly, there is the risk of an explosion. The user
should use the same kind of battery as the original when replacing the battery.
In order to get optimal results from your Tablet PC, please follow the
recommendations below.
The user should remember:
When viewing the computer screen, please maintain a distance of 38cm - 45cm for
the best results.
Avoid exposing the computer screen to direct sunlight, which can cause viewing
discomfort and/or reduce the screen brightness.
AC Adaptor
03
AC Adaptor
Safety Precautions for Using the Power Cord and Power Supply:
Use together with the designated AC adapter.
Keep away from cold.
Keep away from high temperatures or fire hazards.
Do not short-circuit the power-out.
Do not set in water.
Do not use in humid areas.
Do not pull on the power cord.
Do not weld.
Do not microwave or put inside a high-pressure container.
High voltage inside; do not open.
Do not try to alter in any way.
Do not apply pressure to or drop.
Use together with designated power cord.
Store at a room temperature of -20oC - 85oC (-4oF - 185oF), relative humidity 5% -
95%; work at a room temperature of 5oC - 40oC (41oF - 104oF), relative humidity 5% -
95%.
Do not damage the cord insulation.
Set the computer up near an AC outlet. The AC power cord is the main Tablet
PC AC power breaker, and you must be able to access it easily.
This system can handle a power system of 100-240V. It is suitable for use in the
place or country of purchase.
In order to reduce the possibility of electric shock from the telephone network,
plug the computer into an AC outlet before connecting it to the telephone line. Also,
you should disconnect the telephone line first when unplugging the computer from the
AC power outlet.
Do not repair the power supply yourself. To avoid damage to the power supply,
contact a professional to have it repaired or replaced.
All performance procedures, adjustments, controls, etc. aside from those that are
listed in the User Manual (Upgrading Your Tablet PC) can cause serious
radiation damage. In order to avoid laser exposure, please do not open the LCD
cover.
Safety Guidelines
Tablet PC
04
Battery Safety Guidelines
The battery is restricted to usage with this computer.
Do not dismantle the battery.
Do not expose the battery to fire or water.
Avoid fire, heat, and any sort of damage to the battery.
Do not touch either end of the battery with anything metallic.
Be extremely careful when using a damaged or leaking battery.
If the ambient temperature exceeds 45oC (113oF), do not charge the battery.
If electrolytes come into contact with your eyes, wash your eyes with water for 15
minutes, and then go immediately to a doctor.
To buy a battery, contact a local distributor.
Do not store the battery in a warehouse under high temperatures (over 60oC, 140oF).
When you want to dispose of the battery, consult your local Waste Treatment
Center regarding disposal and recycling restrictions.
Mercury Battery Warning
This computer contains a mercury battery used to power the clock and the calendar
loop.
If the battery is improperly replaced, there is the risk of an explosion. Please only use
an identical or equivalent battery supplied by the manufacturer when replacing the
battery.
Operating Specifications
Electrical rating: DC 12V, 3.5A
Operating Temperature: 25oC (77oF)
Storage Temperature: -20oC - 70oC (-4oF - 158oF)
Operating Humidity: under 26oC (78.8oF), 15% - 80% humidity
Storage Humidity: under 65oC (149oF), 90% humidity (no condensation)
Storage Altitude: 0m - 4572 m
Note
The above specifications are applicable to models: TTAB-910/TTAB-510/TTAB-B10
AC Adaptor
05
Introduction of the Tablet PC
Note
1.The next Chinese version of Microsoft Windows XP Tablet PC Edition will have the
speech recognition function.
(The current traditional-character Chinese version does not have this function.)
2.The more correct the stroke-order of the user's handwriting, the greater the
handwriting recognition rate.
Functions
The Tablet PC's size is designed with the user in mind: while writing, you can conveniently
rest your hand on top of the screen.
The Tablet PC's advanced speech recognition system allows it to also be used as a
dictation machine. (See Note 1.)
The wireless connectivity function lets you conduct business no matter where you are,
increasing your efficiency.
Inputting information into the computer is no longer any trouble! Using the stylus, you can
write or draw directly on the screen, and handwritten documents can even be converted to
typed text. (See Note 2.)
AC Adaptor
06
Tablet PC
Exterior
Diagrams of Each Surface
Windows Security
Start Menu
Journal
Tablet PC Input Panel
Power Indicator Hard
Drive Access Indicator
Battery Indicator
Direction Ball + Enter
Microphone
Power
Screen Rotation
ESC
Fn Function Button
Fingerprint Recognition
Device (depends on model)
LCD Display
IEEE 1394
Port
CF Compact Flash
PCMCIA Slot
Stylus Holder
Docking Station
Connection Port
Power Jack
Stereo Speakers
Battery Latch
Memory Expansion Slot
Mini VGA Port
USB Port
Microphone In
Headphone Out
Modem Connector
LAN Port
Reset Button
Hard Drive Door
USB Port
Battery
AC Adaptor
07
Explanation of Indicators
Power Indicator
Hard Drive Access
Indicator
Battery Indicator
A steady green light indicates the computer is turned
on; when the computer is in Standby mode, the light
will flash slowly. When the light is off, the computer is
either off or in Hibernate mode.
A slowly flashing green light indicates the computer is
accessing the hard drive.
A steady red light indicates the battery is charging.
A flashing red light indicates the battery is low.
If the AC adapter is not connected at this time, the red
light will continue to flash until it goes out. This means
that the battery has run too low and is entering a
protected state.
AC Adaptor
Introduction of the Tablet PC
08
How to Use the Tablet PC Tablet PC
Introduction of Function Buttons That Can be Used After Entering
Windows
This product comes with 13 different function buttons that can be used after entering
Windows. To enable you to access your favorite applications quickly, some of these 13
function buttons even offer additional functions. You, the user, can define functions for
four of them, setting them to suit your individual needs and preferences.
The four directions on the Direction Ball (4 separate functions) together with the Enter
function count as 5 function buttons.
Each button has a built-in primary function. However, some buttons can also have another
function at the same time. These extra functions are called secondary functions. Of the
13 buttons, you may assign your personal secondary functions to four.
When you start to operate your computer, you should understand the following two
types of button functions:
1. primary functions
Pre-set system functions. There is no way for you to reset these. The icon to the side
of the actual button represents the primary function.
2. secondary functions
Additional functions that are accessed by pressing the [Fn] button: some are user-
programmable and some have already been assigned.
When the Windows desktop icon appears on the taskbar in the lower right-hand
corner of your screen, both kinds of functions mentioned above have been assigned
successfully and can be used. The different primary and secondary functions can help you
when you are using the Tablet PC and improve your work performance.
AC Adaptor
09
Basic Functions
Power On/Off
Rotate
ESC
Fn Function
Up Arrow
Dn Arrow
Right Arrow
Left Arrow
Enter
Tablet PC Input Panel
Journal
Start
Windows Security
computer power switch
rotates the screen among 2 pre-set orientations, user-
programmable.
the same as a normal keyboard [ESC] key, exits the current
application
activates the secondary function keys
the same as a normal keyboard [Up Arrow] key
the same as a normal keyboard [Dn Arrow] key
the same as a normal keyboard [Right Arrow] key
the same as a normal keyboard [Left Arrow] key
the same as a normal keyboard [Enter] key
turns Tablet PC input panel function on/off
starts Windows Journal software functions
opens/closes "Start Menu"
opens "Windows Task Manager," i.e. [Ctrl] + [Alt] + [Del]
1. You may set the power switch to make the computer enter Standby or Hibernate mode. (Go to
"Control Panel" "Power Options" "Advanced" "Power Buttons" and set as Standby or
Hibernate mode. )
2. The Direction Ball will automatically adjust other functions along with the 4 different screen rotations.
For example, if the screen is rotated from the primary setting to a secondary setting, the arrow orientation
will also change with it.
AC Adaptor
How to Use the Tablet PC
Each button has a basic primary function that has already been defined. These basic
functions are described as follows:
Button Icon Button Function Description
10
Tablet PC
Which Buttons Have Secondary Functions?
Aside from the three function buttons listed below, the other buttons either are or can be
programmed with secondary functions.
Power On/Off - power button
Function - function button
Windows Security - Windows Task Manager
Button Icon Button Secondary Function Description (Primary Button + [Fn])
Secondary Button Functions
You only need to press the particular function button to activate its primary function.
To activate secondary functions, press the Function [Fn] button. When you press it, the
taskbar in the lower right-hand corner of the Windows desktop will display the following
message:
"User-programmable" means you can assign a secondary function to a button.
Rotate
ESC
Up Arrow
Dn Arrow
Right Arrow
Left Arrow
Enter
Journal
Tablet PC Input Panel
Start Menu
Default: Email Client (user-programmable)
moves the present work display to background
[Page Up]
[Page Down]
[Tab]
[Shift] + [Tab]
[Alt] + [Tab]: you may switch between open programs.
Default: Volume Up (user-programmable)
Default: Volume Down (user-programmable)
Default: Internet Browser (user-programmable)
AC Adaptor
11
You can only assign functions when the Windows "Start Menu" is on-screen. Below, we explain
how to assign secondary functions to the four programmable buttons. These four buttons not
only have primary functions, but may also be assigned secondary functions.
Remember, to activate the secondary functions, you must first press and hold
down the [Fn] button and then press the specific secondary function button.
1.Go to "Start" "Control Panel" "Tablet and Pen Settings" "Tablet Buttons"
Or, double-tap the "Change Tablet and Pen Settings" icon on the taskbar in the lower
right-hand corner of the desktop to change the setting:
2. From among the four buttons that you can choose to use, select an appropriate one to
which to add a secondary function. Below the "Tablet Buttons" heading, you will see the
following four options:
Fn + Hot1 Button
Fn + Journal Button
Fn + Input Panel Button
Fn + Rotate Button
3. Tap on "Change."
4. Double-check the "Button Name" in the first row of the "Change Tablet Button Action"
window to confirm the button selection.
5. Select a secondary function you often use from among the 54 different selections in the
"Action" scroll list.
6. Tap "OK" to confirm your selection.
AC Adaptor
How to Assign Secondary Functions to Buttons
How to Use the Tablet PC
12
Tablet PC
Battery
How to Charge the Battery
When using the Tablet PC for the first time, charge the new battery continuously for at least
4 hours with the computer off in order for the battery to get the maximum charge.
First prepare the Tablet PC and battery.
Plug the AC adapter into the computer's DC
power jack. Then connect the AC adapter to
the primary power outlet.
When the battery indicator is red, the battery is charging. When the light is off,
the charging is complete.
AC Adaptor
13
How to Change the Battery
The following diagram shows how to remove and install the battery: first, unlock the battery
by sliding the lock in the direction of the arrow (1). Then, remove the battery and replace it
with a new one to complete the procedure.
Battery Charging Time
The longest that the standard Lithium battery can be used is 3 hours, while the long-life
Lithium battery lasts up to 6.5 hours. However, the actual battery life may vary slightly,
depending on the software, hardware, and how the computer is used. This battery can be
replaced. The battery charging time can also vary, depending on whether it is being
charged while the computer is on and being used or off. A list of battery charging times
under various conditions is given below.
The battery indicator is red when the battery is charging.
Standard Lithium Battery Long-life Lithium Battery Misc.
Tablet PC Status Battery Charging Time
Computer off around 2 hours 42 minutes
Standby around 2 hours 50 minutes
Computer in use around 4 hours 45 minutes
Tablet PC Status Battery Charging Time
Computer off around 4 hours 52 minutes
Standby around 5 hours 5 minutes
Computer in use around 8 hours 30 minutes
Indicator Display
(The power indicator is off)
(The power indicator is flashing)
(The power indicator is green)
AC Adaptor
How to Use the Tablet PC
Tablet PC
14
How to Save Electricity
Step 1 It is recommended that the
computer be set to enter Standby
mode when it is temporarily not in use
in order to conserve battery power.
Go to "Control Panel" "Power
Options" "Advanced" "Power
Buttons" Set on Standby.
Step 2 The user can go to the "Control Panel"
and then "Power Schemes" and
change the power configuration to
"Portable/Laptop" mode to reduce
CPU power consumption.
Step 3 The user can tap "Tablet and
Pen Settings" on the taskbar and
lower the display brightness by
adjusting it on the scale under the
"Display" settings.
AC Adaptor
15
How to Prolong the Battery Life
Battery Use:
1. For the most effective battery use, it is recommended that you wait until the battery
is completely drained before recharging it. This way, you can get the longest life and a
complete current supply from your battery.
2. New batteries must go through a few cycles of being completely charged and drained
before getting the maximum results. In other words, the battery should be allowed to
experience the full range between maximum and minimum voltage.
3. The first time you charge the battery, you should charge it 100%. It must be charged 3-4
hours.
Battery Hot Swap
In order to ensure that your current data is safely stored, we remind you that you must
follow the steps below when changing the battery.
1. Unplug all external devices.
2. Set the system on Standby.
3. Remove the battery.
4. Replace it with a fully charged battery.
5. Press the On/Off button and restore the system to operating mode.
The above procedure is the quick-change battery hot swap and should be completed
in under five minutes (otherwise, data may be lost).
1. Touching either end of the battery with anything metallic can result in a short circuit.
2. Do not hit the battery, put it anywhere warm, or let it get wet or fall.
3. Charging the battery for too long can shorten its life. Please do not charge it for
more than 24 hours.
AC Adaptor
How to Use the Tablet PC
Tablet PC
16
Use and Setup of the Fingerprint Recognition Device (depends on model)
How to Register to Use the Fingerprint Recognition Device
Step 1 When you start up the Tablet PC, the
display to your left will appear and
request that you register to use
fingerprint recognition. Select "Enroll"
to start the registration procedure.
Step 2 In the next "Verify Password" display,
your Windows User Name will already
have been filled out. Please enter
your Windows Password in the
password window, using the same
password as when you login to
Windows. Press "Next" to continue or
"Cancel" to quit.
Step 3 Please select the finger you wish to
register, and press it on the
corresponding finger illustration.
Select "Back" to return to the "Verify
Password" screen, "Next" to register
the fingerprint, or "Cancel" to exit the
program.
AC Adaptor
17
Proceed with the fingerprint input
procedure. Please apply appropriate
pressure to the surface of the fingerprint
recognition device. You must correctly enter
your fingerprint at most 8 times before
fingerprint confirmation can be completed.
Leave your finger on the sensor and press
without releasing it until the green light
below the fingerprint recognition display
stops flashing. Remove your finger and
place it on the sensor again, repeating the
process until the message that you have
completed registration is displayed.
Step 4
Step 5
Step 6
After successfully entering your fingerprint
the required number of times, the "Verify
Fingerprint" screen will appear
automatically.
Click "Finish Enrollment," and then the
process will be complete.
Green means the fingerprint registration was successful. Red means the fingerprint
registration failed.
AC Adaptor
How to Use the Tablet PC
How to Set Up Fingerprint Recognition for Login
How to Use Fingerprint Recognition to Increase File Access Confidentiality
Tablet PC
18
Please go to "Control Panel" "User Accounts" "Pick an Account to Change"
"Create a Password"
OmniPass allows you to safely lock out files or entire folders on your machine.
This will prevent theft or unauthorized viewing of sensitive information.
When these files are encrypted, the information is converted into a format that can not
be read without authorization. Once encrypted, the only way to unlock or decrypt the
file is by using your Master Password or biometric device. OmniPass encrypted files
have the extension .opf. You can use *.opf to search your hard drive for all of your
encrypted files.
It is recommended that you use a new folder to store all of your encrypted files.
To encrypt files or folders, browse to and identify the files or folders to which you want
to prevent unauthorized access, and tap and hold. The contextual menu will appear.
From the menu, select "OmniPass Encrypt File(s)" and tap it.
AC Adaptor
19
OmniPass will ask for your User Name and Master Password or fingerprint.
If a folder contains many encrypted files, a window listing the folder's files and their
encryption status will appear. After encryption is complete, tap "OK."
A few particular folders can not be encrypted, because doing so could have a
negative effect on your system or the programs that are installed. The contents of
"C:\Windows" and "C:\Program Files" can not be encrypted. The OmniPass folder
can not be encrypted either.
To decrypt files or folders, browse to the files or folders you would like to access
normally and tap and hold. The contextual menu will appear. From the
menu, select "OmniPass Decrypt File(s)" and tap on it. OmniPass will then
ask for your User Name and Master Password or fingerprint.
Another way to decrypt is to tap and hold on top of the file and then choose "Open"
or double-tap on the file. Either way, the window with the password prompt will
appear. After that, the files can be decrypted and opened.
Files encrypted using OmniPass will have a new icon. These files can not be
accessed until they have been decrypted.
Before Encryption Encrypted
How to Use the Tablet PC
Tablet PC
20
Calibrating the Stylus
The following method will help your Tablet PC respond more effectively to your stylus.
First, select the screen orientation you would like to calibrate:
Go to "Start" "Control Panel" "Tablet and Pen Settings" "Settings"
1. Choose the appropriate screen orientation that you wish to calibrate: vertical or
horizontal.
2. Now, prepare to calibrate your stylus to achieve stylus/screen accuracy. Select the
"Calibrate" function.
3. Following the on-screen instructions, carry out stylus calibration four times.
4. Calibration complete.
21
Adjusting the Screen Brightness
1. Go to "Start" "Control Panel" "Tablet and Pen Settings" "Display"
"Screen Brightness"
2. Or, just go to the taskbar in the lower right-hand corner of the desktop, and
double-tap on "Change Tablet and Pen Settings" .. The "Tablet and Pen
Settings" dialog box will pop up. Select "Display" "Screen Brightness" to
adjust the brightness.
How to Use the Tablet PC
Tablet PC
22
Adjusting the Screen Orientation
The screen has the following four orientations:
1. Primary Portrait 2. Secondary Portrait
3. Primary Landscape 4. Secondary Landscape
"Portrait" refers to the vertical displays; "Landscape" refers to the horizontal displays.
You may set a screen orientation you often use:
Go to "Start" "Control Panel" "Tablet and Pen Settings" "Display" "Screen
Orientation"
How to Use the Tablet PC
23
How to Connect to External Projectors and Monitors
(depends on model)
TTAB-910/TTAB-B10 Setup
In total, the Tablet PC offers the following four display options:
Monitor...................................... information is projected onto an external monitor; the Tablet
PC screen will be turned off.
Notebook Computer.................. information is displayed on the Tablet PC's screen only.
Intel (R) Dual Display Clone Notebook + Monitor: information is projected onto the
Tablet PC and an external monitor simultaneously.
Extended Desktop..................... Tablet PC desktop is connected to an external monitor. In
this way, you can extend your desktop and work on an
external monitor via the Tablet PC Desktop.
TTAB-510 Setup
When making a presentation in a group or meeting, in order for everyone to be able to
see easily, you may need to project information onto a large screen. How are you
going to? You can select "Intel (R) Extreme Graphics" on the taskbar in the lower
right-hand corner of the desktop and change your setup as follows:
Select "Graphics Options" "Output To" "Intel (R) Dual Display Clone"
"Notebook + Monitor." You may now display information on the Tablet PC and project it
onto an external monitor at the same time.
This system will automatically set the screen display to "notebook computer", i.e. displaying
information on the Tablet PC's screen only.
On the taskbar in the lower right-hand
corner of the desktop, select , and the
image to your left will be displayed. Go
to the "Settings" window.
Tablet PC
24
Select "Advanced" and enter the following
screen; select Lynx3DM+ and enter
the settings screen.
You will see the settings window to your left.
Enter the settings and adjust them to suit you.
At the same time, you can set a hot key so that it
is more convenient.
How to Use the Tablet PC
25
Step 1 Open the memory expansion slot.
Step 2 Line up the DDR/SDRAM memory
module at an angle and insert it. (See note.)
Step 3 Plug in the memory module completely.
Step 4 Once it is correctly plugged in, gently
press it down.
Upgrading Your Tablet PC
Upgrading the Memory
Note: TTAB-910/TTAB-510 use SDRAM; TTAB-B10 uses DDRAM.
How to Change the Hard Drive
How to Recover Your Operating System
1. First connect the USB keyboard to the Tablet PC.
2. During start-up, press [F10] before entering the operating system to carry out system
recovery. Or, after entering the operating system, go to "Start"-->"All Programs"
and execute "System Recovery."
3. Follow the on-screen steps to carry out the system recovery.
How to Use the Recovery CD (depends on configuration)
1. First, connect the USB keyboard and USB CD-ROM to the Tablet PC. Insert
Recovery CD 1.
2. At the same time as the computer is starting up, press [F2]. Enter BIOS/Boot/, and
change to the CD-ROM Drive, pressing [Shift] and [+] to drag the CD-ROM Drive to the
top of the list. Save and exit.
3. Recover the system as needed by following the on-screen instructions.
Tablet PC
26
(IDE connector)
1. First of all, unscrew the cover on the back of the hard drive.
2. Remove the hard drive cover and extract the hard drive, holding it level.
3. Remove the IDE connector from the top of the hard drive, and plug it in
on top of the new hard drive.
4. Holding it level, plug the hard drive into the Tablet PC.
5. Screw the cover back on top of the hard drive.
6. You have successfully replaced the hard drive.
Declaration of Conformity (Safety Standards)
Manufacturer's name: Tatung Company, Ltd.
Manufacturer's address: 22 Chungshan N. Road, 3rd Section, Taipei,
Taiwan, 104 R.O.C.
Declares the following product
Product name: Tablet PC
Model number: TTAB-910/510/B10
27
TTAB-910 meets the safety
standards of the following countries:
Safety: TUV, CB, UL, CSA
Standard
TUV EN 60950:2000
CB IEC 60950:1999
UL 60950 Third Edition
CSA C22.2 No.950-95
EMC:
CE (EU)
EMC:EN
55022:1994+A1:1995+A2:1997
Class B
EN 61000-3-2:1995 Class A+A1:
1998+A2:1998+A14:2000
EN 61000-3-3:1995
EN 55024:1998
RF: EN 301 489-17:2002
EN 300 328-2:2001
Telecom: TBR-21
FCC (US)
EMC: FCC part 15 subpart B
RF: FCC part 15 subpart C
Telecom: FCC part 68
IC (Canada)
Telecom: IC CS03
EMC: ICES-003
RF: IC RSS210
Taiwan (Taiwan)
DGT-RF:BSMI:CNS 13438 class B
DGT-Telecom
Singapore (Singapore)
IDA-Telecom
IDA-RF
Japan (Japan)
VCCI:VCCI/2002(15th Edition)
TELEC
JATE
TTAB-510 meets the safety
standards of the following countries:
Safety: TUV, CB, UL, CSA
Standard
TUV EN 60950:2000
CB IEC 60950:1999
UL 60950 Third Edition
CSA C22.2 No.950-95
EMC:
CE (EU)
EMC:EN
55022:1994+A1:1995+A2:1997
Class B
EN 61000-3-2:1995 Class A+A1:
1998+A2:1998+A14:2000
EN 61000-3-3:1995
EN 55024:1998
RF: EN 301 489-17:2002
EN 300 328-2:2001
Telecom: TBR-21
FCC (US)
EMC: FCC part 15 subpart B
RF: FCC part 15 subpart C
Telecom: FCC part 68
IC (Canada)
Telecom: IC CS03
EMC: ICES-003
RF: IC RSS210
TTAB-B10 meets the safety
standards of the following countries:
Safety: TUV, CB, UL, CSA
Standard
TUV EN 60950:2000
CB IEC 60950:1999
UL 60950 Third Edition
CSA C22.2 No.950-95
EMC:
CE (EU)
EMC:EN
55022:1994+A1:1995+A2:1997
Class B
EN 61000-3-2:1995 Class A+A1:
1998+A2:1998+A14:2000
EN 61000-3-3:1995
EN 55024:1998
RF: EN 301 489-17:2002
EN 300 328-2:2001
Telecom: TBR-21
FCC (US)
EMC: FCC part 15 subpart B
RF: FCC part 15 subpart C
Telecom: FCC part 68
IC (Canada)
Telecom: IC CS03
EMC: ICES-003
RF: IC RSS210
Pointers for Using the Operating System
Tutorials
When you are working in Microsoft Windows XP Tablet PC Edition on the Tablet PC, it is
recommended that you to use the stylus to enter the operating system's tutorials. They will
help you quickly understand the features of the new operating system.
Appendices Tablet PC
28
The first time you start up the system, the screen
will display this window. It provides four types of
tutorials and their descriptions to let the user
know what each one covers. The tutorials will
assist the user in becoming familiar with the
system operation. You will learn the basics for
operating the Tablet PC.
Go to "Start" "All Programs"
"Tablet PC" "Tablet PC Tutorials"
Appendices
29
Help and Support
Under "Help and Support Center," you can find the answers to many of your questions about the
Tablet PC, as well as the necessary help.
Go to "Start"
"Help and Support"
Using Your Accessories
How to Use the Stylus Tether
Please look at the following illustrations.
How to Change the Stylus Tip
Please look at the following illustrations.
Tablet PC
30
1. Please affix one end of the tether
to the stylus.
2. Then, please attach the other
end of the tether to the Tablet PC.
1. First, use the pincers to grasp the
tip of the stylus. Then, pull it out.
2. Put in the new tip, and you are finished.
3. Please do not twist the stylus back and forth, as this can damage it.
Contacting Technical Support
31
Remove all of the external accessories.
Check to see whether all of the power cords are correctly plugged into the power supply
and the computer.
Check the Power Indicator. See whether the machine is turned on.
If a malfunction has occurred with the USB CD-ROM, scanner, printer or any other
external accessory, please contact the manufacturer of that product.
If there is a software problem, please contact the software supplier.
When carrying out a BIOS update, please load related default BIOS values first.
1. Turn on the Tablet PC
2. When the logo appears on-screen, press [Esc].
3. Enter "Enter Setup" to find the BIOS and EC versions.
Contacting the Manufacturer
Before contacting the manufacturer's technical support, please carry out the preliminary
examination described below.
Calling for Assistance
After carrying out the examination described above, if your computer still has a
technical problem, please call the manufacturer's technical support as quickly as
possible. Before calling, please first prepare the following three pieces of information:
Product model number and product serial number (this information is on the
label on the back of the computer)
BIOS version (may be obtained from the BIOS Setup screen)
EC version (may be obtained from the BIOS Setup screen)
M/N:XXXXXXXXXXXX
Product Model Number
Product Serial Number
l
l
l
l
l
l
l
l
l
lYou may obtain BIOS and EC versions from the Setup screen, which can be entered
as follows:
Tablet PC
32
When cleaning the mirror surface, you can use a fine, soft, cleaning cloth to remove
dust and fingerprints from the screen.
Avoid cleaning the computer while it is in use (hot).
When using a liquid cleaner, please do not spray it directly onto the screen's surface.
You should first spray an appropriate amount of cleaning solution on the cloth and
then wipe gently.
Select, as neutral a cleaning solution as possible. Do not use a cleaning solution that
contains ammonia (most household cleaning agents contain ammonia-type chemicals)
or alcohols (most dry types, such as magnetic head cleaners, contain alcohol-type
chemicals).
Appendices
33
FCC Regulatory and Safety Information (USA Only)
Federal Communications Commission (FCC) Radio Frequency Interference Statement
Warning: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
Warning: U-NII-FCC Compliance requirements:
Within the 5.15-5.25 GHz band, U-NII devices must be restricted to indoor
operations to reduce any potential for harmful interference to co-channel MSS
operations. Failure to observe this requirement is in violation of the FCC rules.
Telephone Connection
The Canada Department of Communications label identifies certified equipment. This
certification means that the equipment meets certain telecommunications network protective,
operational, and safety requirements. The department does not guarantee the equipment will
operate to the user's satisfaction.
Before installing this equipment, the user should ensure it is permissible to connect it to the
facilities of the local communications company. The equipment must be installed using an
acceptable method of connection. In some cases, the company's inside wiring associated with
a single line individual service may be extended by means of a certified connector assembly
(telephone extension cord). The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility
designated by the supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause to request that the
user disconnect the equipment.
Users should ensure, for their own protection, that the electrical ground connections of the
power utility, telephone lines, and internal metallic water pipe systems, if present, are
connected together. This precaution may be particularly important in rural areas.
34
Canada Department of Communications (DOC) Notice
Warning: Users should not attempt to make such connections themselves, but should
contact the appropriate electrical inspection authority or electrician, as appropriate.
Avertissement : L'utilisateur ne devrait pas tenter de faire ces connexions lui-meme
mais devrait utiliser les services de l'organisme approprie d'inspection des
installations electriques ou d'un electricien, selon le cas.
Warning: The Load Number .9 assigned to each terminal device denotes the
percentage of the total load to be connected to a telephone loop; this is used by the
device to prevent overloading. The termination on a loop may consist of any
combination of devices, subject only to the requirement that the sum of the Load
Numbers does not exceed 100.
Avertissement : La valeur de charge .9 attribuee a chaque element terminal indique
le pourcentage de la charge totale pouvant etre connecte a une boucle telephonique.
Cette valeur est utilisee pour eviter les surcharges. La terminaison d'une boucle peut
etre constituee d'une combinaison quelconque d'equipements, dans la mesure ou la
somme des valeurs de charge ne depasse pas 100.
DOC Statement (Canada Only)
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le
materiel brouilleur du Canada.