Tatung WHP210 Wireless Headphone User Manual WHP210 UG F

Tatung Company Wireless Headphone WHP210 UG F

Manual

Product Introductionand Safety Approvals Unique FeaturesSpecificationProduct AccessoriesParts Introduction LengthadjustmentLED IndicatorPairPower On/OffCharging PortReset1234567900900User Guide Symbols1234 5 712345676Steady red lightSteady greed lightFlashing green lightDevices are waiting for pairingDevices are pairedDevices are not pairedȮThe headphone is chargingFCC StatementBoth the headphone and the trarnsmitter are compliant with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)These devices may not cause harmful interference, and (2)These devices must accept any interference received, including interference that may cause undesired operation. CEThis product is CE marked according to the provisions of the R&TTE Directive. (99/5/EC)The SoundOn WHP-210 is a high performance wireless headphone delivering ultra clear sound with extended bass effects. The headphone comes with a wireless music transmitter that can be connected to any type of audio source via a standard 3.5 mm audio jack. Also included is a RCA cable with 3.5 mm adapter that can be used to accommodate a separate 2-channel audio output port. The transmitter can be powered by a power adapter, or by 3 AAA batteries. You may find the battery cabinet located at the bottom of the transmitter. The headphone has a built-in Li-Polymer battery. When fully charged the battery offers up to 12 hours of usage. To charge the headphone simply plug into the power adapter. Please read the following certification and safety approvals.Based on advanced WiStereoTM digital wireless technology for reliable transmission of music in the 2.4 GHz band. Effective within 100 feet range from source. Patented dual-speakers in each of the ear-cups delivering a full range of sounds as well as a soft, deep bass.The transmitter can be powered by the power adapter, or by 3 AAA batteries making it perfect for on-the-go lifestyles.Connects to any type of music input via a standard stereo jack, such as iPod, Zune player, DVD players, TV audio out, CD players, etc.Fast working, easy to use, automatic Pair function.Extended battery life lasts up to 12 hours when fully charged.Ultra comfortable headband design for long wear hours.WHP-210ResetIf headphone is functioning improperly, poke the reset hole by a paper clip.Power On/OffPress this button to control power on/off.Charging PortConnect to the AC power adapter for charging.LED IndicatorA red indicator represents charging functions.A green indicator represents signal connections.Press to increase the headphone volume.Press to decrease the headphone volume.1234567PairPress “pair” button to connect the wireless headphone and the USB Puck.1.0SoundOn WHP-210Wireless HeadphoneNoise-resistant Digital Wireless TechnologyPatented Dual-Speaker Design in Each Ear-cupSuperior Sound Quality and Extended BassWireless Transmitter Key Adapts To Every Music PlayerRe-chargable Headphones Provide up tp 12 Hours UseUnique Comfortable Headband DesignWireless TechnologyHeadphone Listen Time Transmitter Usage TimeStandby TimeCharge Time (full charge)Distance of UseHeadphone WeightTransmitter WeightCharging MethodHeadphone Battery TypeFrequency ResponseAudio QualityDistortion (T.H.D.)Speaker DriversWiStereoTM for advanced 2-way digital transmission in the 2.4 GHz frequency bandUp to 12 hours (per charge)Up to 4 hoursUp to 3 monthsUp to 3.5 hours100 feet7.9 ounces1.6 ouncesAC Power AdapterLithium Polymer20Hz ~30,000Hz (perfect for all music, game, and voice)Uncompressed audio for music (CD-quality) and voice (extra clarity)<0.08% (professional grade audio performance)2 on each side for full-range audio and sub-woofer enhancement with SafeBass technology30mm Neodymium for left/right channels40mm Neodymium for subwooferModelRUser Guide * 1pcWireless Headphone * 1pcAC Power Adapter * 1pcWireless Transmitter * 1pcRCA Plugs with 3.5mm Adapter* 1pcAAA Batteries * 3pcs AAAAAAAAAAAA3.5mm Stereo Cable * 1pcHeadphones Made In China
Handling the headphone Do not bend, drop, crush, puncture, incinerate, or open the headphone.Repairing the headphoneNever attempt to repair the headphone yourself. The headset does not contain any user serviceable parts. For service information, read the “Help” section from the warranty card. The headphone should be replaced only by authorized service providers.ImportantUser Information11812 13Getting StartedTo ensure this headphone to work properly, please avoid recharging while using.AC Power Adapter is used to both charge the headphone and the transmitter( if batteries are not powering the transmitter).Steady red light is turned off when the headphone is fully charged.The headphone is charging9Power offřPress and hold the power button for 2 sec. to turn off the headphone.Power onřPress the power button to turn on the headphone.Turning the headphone on/off10First time use : Charge 3.5 hours before using headphone for the first time.ChargingPlug in to charge Unplug when finishedAC Power adapterAvoiding hearing damage Permanent hearing loss may occur if the headphone is used at too high a volume. Set the volume to a safe level. Warning: Over time it is possible to become accustomed to high volumes that may be damaging to your hearing. If you experience a ringing in your ears or your own voice and other sounds appear muffled, stop using the headphone and consult a hearing professional.Hearing experts suggest that in order to protect your hearing:Limit the amount of time you use the headphone at high volume.Avoid turning up the volume to block out noisy surroundings.Turn down the volume if you can't hear people speaking near you.Maintaining battery lifeDue to the physical nature of the battery, required charging time may increase while the actual capacity of the batter may decrease. If you have any questions regarding the replacement of the built-in battery, please contact our service center.15No sound emitting from the HeadphoneMake sure the headphone is charged, and the transmitter is powered either by the AC power adapter, or by 3*AAA batteries. Try new batteries if you think these batteries have run out of power.Check if the music is being played from your music players.When transmitting music from a PC or DVD player, check to see that the audio out is correctly selected and is not muted.Simultaneously press the PAIR keys, both on the transmitter as well as on the headphone, for 2-3 seconds until sound returns.In case the music player/source has a low volume output, try pressing the volume up key on the headphone.15Sound break-upFirst move around and get closer to the Transmitter. The constant sound break-up may have occurred because of the range and radio-wave transmission obstacles, such as walls and large objects that exist between the Transmitter and the headphone. If you are using AAA batteries, the batteries could be running low. Plug in the power adapter of the Transmitter, and check if the sound break-up improves. If that is the case, replace the batteries. No connection signal visibleMake sure the headphone is charged and the transmitter is properly connected to the audio source/player. Also, stand within close range of the source/player and try the power button on the headphone once more.The headphone automatically shuts offCheck to see if the battery life is too low or the indicator light on the headphone is off.Unexpected behaviorReset the headphone. (See Step 6 )Troubleshooting 14Connect the TransmitterAC Power adapter Audio Left/Right Output PortMP3,CD Player or DVD PlayerTransmitter Battery cabinet with 3 AAA batteries.AAAAAAAAAAAAAAAAAAUnplug the headphone charging cord ifany of the following conditions existThe charging cord became frayed or damaged.The charging cord has been exposed to rain, liquids, or excessive moisture.The headphone or the AC power adapter might needs service or repair.When cleaning the headphone.When using the headphone.[Note: The headphone does not work when it is being charged.]Simultaneously press the PAIR buttons of both the headphone and the transmitter to connect the signal transmission. When light is steady devices are pairedPairing the headphone to the transmitterWhen light is flashing devices are waiting for pairing
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. "RF exposure warning The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. "

Navigation menu