Technicolor Connected Home USA DCI104COM Digital Transport Adaptor (DTA) User Manual
Technicolor Connected Home USA LLC Digital Transport Adaptor (DTA)
User Manual
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug the apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Ensuring Optimum Performance Disconnect the product from the power before you connect the product to (or disconnect it from) any other equipment. Avoid any contact with the power, which can be lethal or cause severe electric shock. Do not insert anything into any opening of the case. Leave the power socket accessible so that you can unplug the set quickly. Leave 2 to 3 inches around the product to ensure proper ventilation to it. To clean the product, use a dry clean cloth with no cleaning solvent or abrasive products. Clean the ventilation openings regularly. 3671035E TIS purse5 1 1/4/11 2:20 PM Environmental Information The batteries use some hazardous substances which pollute the environment. Do not dispose of them with other articles. Take care to dispose of them at special collecting points. Technical Specifications Model Type DCI104XXX Operating Voltage 120V AC / 60 Hz / 0.5A Typical Power Consumption 6W max. Weight 0.35 lb. / 0.16 kg Dimensions (W x H x D) 4.92 x 1.38 x 3.94 Inches Operating Temperature Range 59 to 95ºF / 15 to 35ºC Storage Temperature Range - 4 to 158ºF / -20 to 70ºC Manufactured under license from Dolby Laboratories. FCC Information The User is cautioned that changes or modifications, not expressly approved by the party responsible for compliance, could void the user’s ability to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following 2 conditions: 1. This device may not cause harmful interference; 2. This device must accept any interference received, including interference that may cause undesired operation. Responsible party (contact for FCC matter only): Technicolor Inc. 101 W. 103rd St. Indianapolis, IN 46290 U.S.A. Meaning of Symbols This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product housing that may be of sufficient magnitude to constitute a risk of shock. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions accompanying the product. 3671035E 3671035E TIS purse5 2 1/4/11 2:20 PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2011:01:06 13:26:09-07:00 Create Date : 2010:12:29 14:28:47-05:00 Metadata Date : 2011:01:06 13:26:09-07:00 Creator Tool : Adobe Acrobat 8.0 Format : application/pdf Document ID : uuid:fedd7a84-6cf9-4c3f-abea-1b86f2006c4f Instance ID : uuid:af335cbf-816e-47ba-9569-f27825f79e4f Producer : Adobe Acrobat 8.0 Image Conversion Plug-in Has XFA : No Page Count : 4 Creator : Adobe Acrobat 8.0EXIF Metadata provided by EXIF.tools