Technicolor Connected Home USA DWI219COM IP Set Top Box User Manual user guide 2
Technicolor Connected Home USA LLC IP Set Top Box user guide 2
Contents
- 1. user guide
- 2. user guide 2
user guide 2
Get to Know the Parts Top of adaptor box Front of remote LED indicates key press Use to pair remote Switch profiles Return home Close and return to TV Accept incoming calls and access contacts End call and ignore incoming call Place call on hold, mute mic and pause camera Select current option and navigate left/right/up/down WPS Change screen layout Adjust volume WPS Zoom self-view and pan/scan to adjust video See self-view Use for wireless setup with WPS capable routers. (Currently not available) Mute microphone Mute call Pause camera Rewind Fast forward SD Slot Use for viewing media (Currently not available) Front of adaptor box Play and pause Network Messages Power SD Card Use the Left arrow to go back to the previous screen. Play/Pause/Forward/ Rewind are not available at this time. Getting Started Guide Network Indicator Message Indicator Power Glowing LED indicates connection to home network. Glowing LED indicates new messages. Glowing LED indicates adaptor is on. XFINITY® is your interface to a growing number of new products, services and features that will become available to you on your HDTV. Important Information Back of adaptor box Back of remote Ethernet Audio Reset What’s in the Box If anything is missing, please call Comcast at 877-704-7713 for assistance. HDMI TV Out Cable In Battery compartment Camera Ethernet HDMI You’ll Also Need: Reset Camera USB Audio IR Power Messages Power Press ALT for characters in blue—i.e. press ALT then Q for 1. You will need to press ALT for each character. HDMI Cable In The Reset button has two functions, depending on the length of time held: Front of camera Lens with Shutter Shutter closes when camera is off. Microphones HDMI TV Out USB/IR (Currently not available) Normal Reset Insert a thin object and hold the Reset button for 2-5 seconds to reboot the adaptor and keep your personal settings. • HDMI-capable Comcast set-top box Remote (1) • HDTV Pull the tab from the remote’s battery compartment before using • Internet connection with at least 1.5 Mbps simultaneous upload and download speeds (check your speeds at http://speedtest.comcast.net) • Comcast ID • Skype™ account Power Camera with clip (1) Factory Reset Insert a thin object and hold the Reset button for 15 or more seconds to delete ALL personal settings and restore the adaptor to the default factory settings. Network Messages jale ALT Press to prevent accidental typing while using front of remote. PULL Lock Power SD Card Adaptor box (1) Microphones On/Off Indicator Glowing LED indicates camera is on. Clip Adjust for placement. Note: This packaging has been specially designed using sustainable materials. Be kind to the environment and re-use this box. Power adaptor (1) Power adaptor cable (1) USB extension cable (1) HDMI cable (2) Important Information Save time during activation by completing the information below. SetUpUp 1 Set TV Top TV Top: Place the front of the camera on top of your TV, with the bottom lip resting just below the top of the screen.* OR Comcast Account Push the clip down until it touches the back of the TV and the camera Flat Surface is secured. You must use your Comcast ID to activate. To add more Comcast email addresses (up to six) to your account, please visit http://customer.comcast.com. Pivot the angle of the camera and adjust to capture your preferred viewing area. *The recommended viewing distance is 5' - 12'. Camera should not be used near strong magnetic fields. OR @comcast.net Flat Surface: Place the camera on your level surface with the lens facing the viewing area.* Password: Hold the rubber bottom in place while pivoting the angle of the camera to capture your preferred viewing area. Skype Account You will link your Comcast ID to a Skype account during the TV activation process. If you don’t have a Skype account or need to create a new one, you can do so during activation. Skype Name Password: Home Network If you choose to use your wireless home network, you’ll need the following information during the TV activation. If you have a compatible router with WiFi Protected Setup (WPS), this will be detected and you’ll automatically connect to your wireless network. (WPS is currently not available) Network Name (SSID) Network Password (Key) Back of TV OR Flat Surface *The recommended viewing distance is 5' - 12'. Camera should not be used near strong magnetic fields. Important Note for Wall-Mounted TVs Make sure the combined weight of the camera (8.81 oz.) and TV does not exceed the maximum rating for your wall mount. Check the wall mount manufacturer’s manual for the maximum rating. The camera clip is not compatible with all TV wall mounts. For wall-mounted TVs that have been installed flush with the wall, camera placement on your TV is not recommended due to space constraints which may result in damage to your TV or the camera. 3 Activate Important Note for Fireplace-Mounted TVs The camera is not intended for use in high-temperature locations, such as above fireplaces. Network Messages Power SD Card Messages Connect and Power Up Power Plug in one of the provided HDMI cables to your set-top box and the other end to the HDMI Cable In port on your adaptor box. HDMI HDMI Messages Power Security Encryption Method (for hidden wireless networks only) Plug the second HDMI cable to the HDMI TV Out port on your adaptor box and the other end to one of the available HDMI ports on your TV. Back of Back of TV Modem if using Ethernet Plug the camera cable into the Camera port. If the camera cable is not long enough to reach the Camera port, connect the provided USB extension cable to the camera cable. If you need help during setup or activation, please call 877-704-7713. Camera Digital Audio Receiver Outlet Once you’ve connected the devices, you’ll see an XFINITY screen. In a few minutes (up to 15), you’ll be greeted with a Welcome screen. Please don’t unplug or reset the adaptor box before you see this screen. If you do unplug or reset before activation is complete, the system will restart from the beginning of the setup process. OR Ethernet connection: Plug a CAT-6 Ethernet cable (not provided) to the Ethernet port on the adaptor box and the other end to an available port on your modem or router. If you haven’t already done so, pull the tab from the remote’s battery compartment before using. Wireless connection: Skip this step and follow the instructions during TV activation. Flip the remote to the keyboard side. See Get to Know the Parts for keyboard tips. Complete the activation by following the directions on your TV screen. If you’re using an audio receiver, disconnect the SPDIF (Optical Digital Audio) cable from your set-top box and plug it into the Audio port on the adaptor box instead. You’ll need the Important Information section (for your Comcast account, Skype account/password, and home network info) to complete some steps. Connect the power adaptor to the power adaptor cable. Not available at this time Not available at this time HDMI TV Out Cable In Using your TV remote, select the same HDMI input to which you connected the adaptor box. Activate If you need help during setup or activation, please call 877-704-7713 Decide if you want to connect to your home network using a wired Ethernet cable or wireless connection. Plug the power adaptor into the Power port on the adaptor box and the power adaptor cable to an electrical outlet. There is no actual power button on your adaptor box so this power cable is the only way to turn the system on and off. Ethernet HDMI Camera USB Audio IR You have several options for network connectivity: 1. Wired connection using an Ethernet cable 2. Wireless connection to an available or hidden network 3. WPS for WPS-capable routers only (WPS is currently not available) Reset A short series of diagnostic tests will run automatically to ensure everything is working properly and you'll have the choice to merge your XFINITY and Skype contacts. Power Click FINISH to jump right in! Ready to Connect with Family and Friends? First, make sure you’re signed in. If you already have an existing Skype account with contacts: Go to Home > Contacts and select from the list. • Click VIDEO CALL, AUDIO CALL or MESSAGE to connect. • If you’ve just set up your Skype account and don’t have any contacts yet: Go to Home > Contacts and select Add Contact. • Flip the remote and use the keyboard (see Get to Know the Parts for tips) • to enter a Skype Name or email address. Once your invitation to connect is accepted, the person will appear in your Contacts. Select the person. Click VIDEO CALL, AUDIO CALL or MESSAGE to connect. • Support Information Please visit www.comcast.com/skype for additional online support information. For setup or activation-related questions, please call 877-704-7713 for assistance. For questions following activation, please contact our customer care staff . We are here to assist with all of your service 24-hours a day at needs. Back of adaptor box Please keep for future reference, but if you decide to toss, please recycle. 1698397A Getting Started Guide v.1.0 Printed in China
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2012:02:18 10:02:24+08:00 Creator : Adobe InDesign CS5 (7.0.2) Modify Date : 2012:03:14 09:58:44-06:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2012:03:14 09:58:44-06:00 Creator Tool : Adobe InDesign CS5 (7.0.2) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 4993 bytes, use -b option to extract), (Binary data 8769 bytes, use -b option to extract) Instance ID : uuid:82f15fd9-3636-44b3-8b85-9ae1bf347b70 Document ID : xmp.did:09801174072068118C14FBC3150B4FA6 Original Document ID : xmp.did:F77F11740720681192B0FA6975E40F43 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:F77F11740720681192B0FA6975E40F43, xmp.iid:F97F11740720681192B0FA6975E40F43, xmp.iid:FA7F11740720681192B0FA6975E40F43, xmp.iid:FD7F11740720681192B0FA6975E40F43, xmp.iid:008011740720681192B0FA6975E40F43, xmp.iid:1EBDF8760A20681192B0FA6975E40F43, xmp.iid:1FBDF8760A20681192B0FA6975E40F43, xmp.iid:20BDF8760A20681192B0FA6975E40F43, xmp.iid:23BDF8760A20681192B0FA6975E40F43, xmp.iid:60F9D9E5252068118A6DF7F193BD21BB, xmp.iid:704DC24C292068118A6DF7F193BD21BB, xmp.iid:714DC24C292068118A6DF7F193BD21BB, xmp.iid:724DC24C292068118A6DF7F193BD21BB, xmp.iid:754DC24C292068118A6DF7F193BD21BB, xmp.iid:764DC24C292068118A6DF7F193BD21BB, xmp.iid:14CA81372A2068118A6DF7F193BD21BB, xmp.iid:A129A83D082068118A6DFB3731D563D3, xmp.iid:A429A83D082068118A6DFB3731D563D3, xmp.iid:A729A83D082068118A6DFB3731D563D3, xmp.iid:A829A83D082068118A6DFB3731D563D3, xmp.iid:98693DC81E2068118A6DFB3731D563D3, xmp.iid:4406B91C102068118A6DD58112FAD849, xmp.iid:3A18DF0F142068118A6DD58112FAD849, xmp.iid:3D18DF0F142068118A6DD58112FAD849, xmp.iid:3E18DF0F142068118A6DD58112FAD849, xmp.iid:4118DF0F142068118A6DD58112FAD849, xmp.iid:1FD54611332068118A6DD58112FAD849, xmp.iid:27DE8150362068118A6DD58112FAD849, xmp.iid:2ADE8150362068118A6DD58112FAD849, xmp.iid:2BDE8150362068118A6DD58112FAD849, xmp.iid:2EDE8150362068118A6DD58112FAD849, xmp.iid:2FDE8150362068118A6DD58112FAD849, xmp.iid:594E8398362068118A6DD58112FAD849, xmp.iid:5A4E8398362068118A6DD58112FAD849, xmp.iid:5D4E8398362068118A6DD58112FAD849, xmp.iid:36C3834A412068118A6DD58112FAD849, xmp.iid:39C3834A412068118A6DD58112FAD849, xmp.iid:3AC3834A412068118A6DD58112FAD849, xmp.iid:7A377C17422068118A6DD58112FAD849, xmp.iid:03801174072068118C14FBC3150B4FA6, xmp.iid:04801174072068118C14FBC3150B4FA6, xmp.iid:05801174072068118C14FBC3150B4FA6, xmp.iid:06801174072068118C14FBC3150B4FA6, xmp.iid:09801174072068118C14FBC3150B4FA6, xmp.iid:CBA1E699D059E111B320BED4906F83C4 History When : 2011:12:06 16:46:34-05:00, 2011:12:06 17:02:24-05:00, 2011:12:06 17:02:24-05:00, 2011:12:06 17:05:09-05:00, 2011:12:06 17:06:11-05:00, 2011:12:06 17:08:07-05:00, 2011:12:06 17:08:48-05:00, 2011:12:06 17:09:36-05:00, 2011:12:06 17:09:36-05:00, 2011:12:08 14:31:13-05:00, 2011:12:08 14:31:13-05:00, 2011:12:08 14:35:38-05:00, 2011:12:08 14:35:38-05:00, 2011:12:08 14:36:54-05:00, 2011:12:08 14:37:47-05:00, 2011:12:08 14:37:47-05:00, 2011:12:13 14:28:05-05:00, 2011:12:13 14:28:05-05:00, 2011:12:13 14:38:44-05:00, 2011:12:13 14:39:23-05:00, 2011:12:13 14:39:23-05:00, 2012:02:15 10:44:10-05:00, 2012:02:15 10:44:10-05:00, 2012:02:15 11:10:18-05:00, 2012:02:15 11:10:58-05:00, 2012:02:15 11:10:58-05:00, 2012:02:15 14:49:22-05:00, 2012:02:15 14:49:22-05:00, 2012:02:15 14:49:38-05:00, 2012:02:15 14:50:12-05:00, 2012:02:15 14:50:12-05:00, 2012:02:15 14:51:22-05:00, 2012:02:15 14:51:22-05:00, 2012:02:15 14:51:56-05:00, 2012:02:15 14:51:56-05:00, 2012:02:15 16:12:58-05:00, 2012:02:15 16:12:58-05:00, 2012:02:15 16:13:40-05:00, 2012:02:15 16:13:40-05:00, 2012:02:16 09:13:54-05:00, 2012:02:16 09:14:14-05:00, 2012:02:16 09:14:14-05:00, 2012:02:16 09:14:54-05:00, 2012:02:16 09:14:54-05:00, 2012:02:18 09:33:46+08:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /, /metadata, /;/metadata, /;/metadata Derived From Instance ID : xmp.iid:06801174072068118C14FBC3150B4FA6 Derived From Document ID : xmp.did:05801174072068118C14FBC3150B4FA6 Derived From Original Document ID: xmp.did:F77F11740720681192B0FA6975E40F43 Derived From Rendition Class : default Doc Change Count : 1 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 2EXIF Metadata provided by EXIF.tools