Technicolor Connected Home USA REM002A RF Universal Remote Control User Manual Instruction Book D770
Technicolor Connected Home USA LLC RF Universal Remote Control Instruction Book D770
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 574100 |
| Application ID | BPKwHWigDvAd/phoZ5dCkQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 286.18kB (3577301 bits) |
| Date Submitted | 2005-08-22 00:00:00 |
| Date Available | 2005-08-22 00:00:00 |
| Creation Date | 2005-05-25 14:46:31 |
| Producing Software | Corel PDF Engine Version 10.410 |
| Document Lastmod | 2005-08-23 08:33:06 |
| Document Title | Instruction Book D770 |
| Document Creator | CorelDRAW Version 10.0 |
| Document Author: | Dadang Asikin |
mlmnnnumcarmmonel
- Updated mdtv library now include: cums tru- Dish Network aatellrte mtivm
~ Dedieated Guide, Fetch and Whn keys tor nee wrttl ynur digital satellite system
. Compatible with rtrelatesi tethnnlogy
-ta.eramnemrma.-daurneaue.anmrnreara.admm-aa
”Mm-HM mmnmmamwammnd
manuumnwmmwmmmM—n-flma—
mum—“quay“
mm:-
when
min
or.»
Mae.
and
rare on
Puma
Mun
may.
no...
an.
or...
west-rt;-
a...
an
sar-
sate...
sat...
Sum
same»
in.
sea.
stare
Shown
5m
snore-
son
now
so...—
Hfléfigipuiifl Wily-E
6:4”;
"mmulwnmmn-dnmmlmlum
qu—hmmunlw lquhun-MMMM
ems my)“ lNr.
D770 mm) North Meridian“ ' Street
"NW IN 46290
rm cm """‘°"°‘"
D"! In I“ E
H in ronron 90560
0 3 17 6 A 7 haematite) nuqh‘ued Marc-(s) nan-amino?
DBS SYSTEM
AUDIO SVSTEM
Cornwlible widr rnrrrt
brands at mnpormm
'See (mp-ubility on bath
(r‘o
Thank you for purchasing this RCA universal remote control. This
product in designed to operate a wide variety of video and audio
components, Please retain this guide for future reference.
Table of Contents
battery installation ............................................... 3
Key Description ............................................ 4-5
Programming The Remote Comm! ............................... 5
Programming For TV—Dimct Entry Method ....................... [1
Programming For VCR—Direct Entry Method .......... . 6
Programming For DVD—Direct Entry Method .................... 6
Programming The AUXt And aux: Keys ...................... t 7
Using Automatic Code Search .................................... 8
Using The Remote To Control A Component .................... 8
Changing The RF Remote Control Code i 3—9
Menu Function t . , ..................................... 9
Troubleshooting ........................................... lo-ll
Questions .................................................... ll
Warranty .................................................... ll
This universal remote control is already programmed for most RCA,
GE, and PROSCAN branded TVs, VCRs, mas systems (manufachlrerl
before 2003), and DVD players.
Nah: For users nl RCA and PKOSCAN Dfi pmdum: Older DDS models lequlm
tirattheluworueuuuyorrllrisremotebeusedtnrnaheprogram
selections. Urt the ox key for making pmgflm relertiaru m newer
RCA and PRCSCAN D5 mudzlrl. ll your satellite mlver wn purdiand
alter 20m, pmgnmming the remote is required
Buttery Ins'a llution
YourmfiversalmmqmmZnewAAalkalhebamieflsddsepandyJ,
To install the batteries:
1. On the back of the remote, push down on the cover and slide it off,
2. Insert the batteries, matching the battzn'es to the (+) and (—) marks
inside the battery case,
1 Slide the battery cover bank into plate.
Nola. Repmgvamming may be required after batteries are Rplaced
ANIEMNA in Tv Mode, lets you
switch the source at the video signal
from satellite signals to an oft-air
antenna
or cable signal when using the our
T0 TV jack. ln VCR Mode, it functions
as a TV/VCR input key
ABEDMLS Use the navigation arrows
to move the tin-screen highlight up,
down, left, or right. Using the arrows
to highlight a menu item is also
called "pointing,"
Mm Use to scan up and win win
down through the channels in the current . » ‘~
channel list. if you are in the program
guide or menu system, use the on +/-
keys to page up and down a screen at a ‘i ‘
time. You can also use the on +l- keys on an on.
the top of the digital satellite receiver to l
change the channel.
QLEAB Removes the onscreen displays
and returns you to normal viewing
W5 When
programmed, these keys are used to put
the remote in a specific mode so that it
can cont-ml that component.
nzvmst no minim
terms not crust
AUX1 and AUXZ Act as "wildcar “ i l i i l
keys. They can be programmed to
control another TV, VCR, DVD.
satellite receiver, cable box, or an audio
component Follow the direct entry
programming instructions on page 7 to
program these keys
Nut-l The Auxr key is pm-pnrgmmmvd with
codes to control a Dish hetwork digital \\ 7 /
satellite receiver.
DVD Puts the remote in DVD Mode,
SAT Puts the remote in SAT Mode. This key is pie-programmed
to control an RCA DIRECTV‘ digital satellite receiver manufactured
before mitt.
NW This key carmnr be reprogrammed, if the SAT key doesn't control your
melvt'r, use the unit key to program the remote to control your satellite receiver
it it was purchased alter 2003
TV Puts the remote in TV Mode.
VCR Puts th: remote in VCR Mode.
WUsemedigitkeyatotunedirecflytoamm-digit
satellite channel or non-satellite channel. it a satellite channel number is
less than tourdigit- long, you must press on after entering the channel
number. it you are in the menu system, use the digits to highlight and
select items. Use 0 to return to the previous menu screen.
EEIQM Either brings up the Fetch menu or tells the receiver to take the
action you programmed it to take,
mm Moves you back and forth between the last two selected
channels. in the menu system, returns you to the previous screen
mm rxsm riuoir
Gum: Brings up the program guide. Subsequent presses or the sums
key switch between the Detail and Grid guide formats
[NEG songs up the tin-screen channel banner, password challenge, or
purchase otter screen. Press again to get program details, in the
program guides. press INFO to get intormatron about the highlighted
program or channel.
Key Description Kemlnued: Programming For TV—Dlrect Entry Method
1.
Z.
Lemmas This light turns red at each valid key press. When
programming the remute cuntml, it flashes or turns on or off to indicate
pmgmmmlng slams.
MENU Displays the Main menu. lt you are already in the menu system.
press OK or MENU to select a highlighted choice. When you are using
the remote control to operate an RCA, GB, or PROSCAN VCR (the
remote is in VCR mode), the MENU key functions as a PROGRAM key
Milli Reduces the Tv‘s volume to its minimum levd. has again to
restom the volume.
mg Selects a highlighted choice it you are in the menu system. After
entering a and, two-, or threerdlgit satellite channel number. press In
tune to the channel it you are entering a number other than a satellite
channel number (for instance, to tune your VCR to a channel), you do
not need to press this key, Press the 0K key when the interactive TV
icon (4) appears on the screen. Pressing 0K will display more
information and offer the Chance to interact in some way with
what is displayed on screen.
M Turns the component you are controlling on or off. When
messed twice within two seconds, all components that are on will be
turned off. This feature only wDrks with must RCA, GE, and PRCSCAN
products. You can also use the ON'OFF key onrthe top (fnint panel) oi
the digital satellite receiver to turn oft the receiver.
slStE This key is not used by the digital satellite nscel‘ver. it is functional
only with RCA, CE, PROSCAN TVs and vCRs.
r n K
muss) When programmed, mue keys are used to control an auxiliary
component, such as a VCR or DVD player. Note: it your VCR is coruiecied,
die RECORD key can be used to schedule a timed recording when learrg
the Program Guide or to begin recording while watching a program (in
VCR Mode).
MM Adiusls the audio volume ot your TV.
mum press the wtto key one or more times to scroll through
the user profiles. when you am using the remote contml to operate an
RCA, GE, or PROSCAN TV (in TV Mode), press the WNO'INPU'I‘ key
one or mm? times tn scroll tiimugh the available video Input sources.
Programming The Remote Control
The minute is already programmed to control most RCA, GE, and
PROSCAN branded components; it may need to be programmed to
contml other manufacturers' brands.
mummmflsjmnuo determine whether the universal
remote control needs to be programmed, turn on a component, such as
a VCR, point the remote at the VCR, and puss the van key. Then press
ON-OFF or CH 0 or CH - to see it the VCR mspnnds tn the remote
commands. it it does not respond, the remote needs to be programmed.
There are two ways to program the remote control: Automatic Code
Search or Direct Entry
Programming For VCR D ed Entry Method
Programming For DVD—Direct Entry Method
Manually turn on the TV.
locate the enclosed TV Code List. Find
your brand of TV.
Press and hold the TV key
Enter a code hunt the code list.
Release the TV key, and then press
ON-OFF to see it the TV responds to
the remote control commands. it it
doesn't, try pressing the TV key and
then Oil-OFF again.
If you get no response, repeat these steps
using the next code listed for your brand
until thew responds to the remote
control commands
Enter your code hem tor easy mterence.
Manually cum on the VCR.
Locate the enchsed VCR Cude List.
l-ind your brand ot VCR.
Press and hold the VCR lazy.
Enter a code from the code list.
Release the VCR key, then pmss
ON-OFF tn see it the VCR responds
to the remote mntml commands. If
it doesn't, try pressing the VCR key
and then ON'OFF again.
if you get no response, repeat these
steps using the next code listed
for your brand until the VCR responds
to the remote Cunmil Commands.
Enter your code here for easy reference.
Manually turn on the DVD player.
locate the enclosed DVD Code List.
Find your brand ut DVD player.
press and hold the DVD key
Enter a code from the code list.
Release the DVD key, and then
press ON-OFF to see it the DVD
responds tn the remote control
commands. it it doesn't, try pressing
the WD key and then ON-OFF again,
it you get no response. repeat these
steps using the next code listed for
yourbrand, until the DVD responds
to the remote control commands.
Enter your code here lor easy reference
<" .
I]
Programming The AUX] And AUX? Keys
Yuu can assign any one of the followurg components to the AUX1
or AUX2 keys:
A second TV, VCR, DVD. satellite system, cable box, or an
audio component.
Not-mic Auxi key is pmspmgrflmmcd with codes to control nah Network digital
satellite mam/er! The stir key is pre-pmgmrnmed with codes to control iKA
DIRECTV digital satellite receivers ll you wish to control a second RCA DIRECW
digilul satellite receiver. pnigram the mill or Am key with satellite code soot
Then reter to your RCA DlRlsCrV saleuile receiver manual for Instructions on
remote control my
I. Manually turn on the component you wish to control.
Fmd the tourdigit code for the component
you wish to program in the code list.
2. Press and hold the Auxr or AUX2 key, M, M, on
while holding the mm or AUX2 key, A 0, _sp_
press the first number of the component , ' .~
code. if the first number is valid, the
LED will him off.
3. Enter the code using the DIBIT (0-9) keys.
After your full code is entered, the LED .® 9 ,@
light will turn onto verify that the code .® ® 0 fig
entered is valid. Release the component ,@ “3 ,® m
key The LED will go off ,6
nous: ii the code is invalid, the LED light will llash
tour turns and the rcmoic will revert back in
mml operation mainiarrung the current code
4. Aim the remote at the component you
wish to control and press the ON-OFF
key. The component should turn off,
QM)"
Not-c ll rlre rompanmrt you have pmgrarnmed
does not mpond, try all the codes for
your brand It the codes do not work, or
your brand is not listed, try the Autumnm
(ode search method on pagts R
5. untli your component on, press
GHQ (CHANNEL UP) or the ON-DFF (to
key. It the component resptmdsr
no further programming is required.
6 Enter your code here and then check
the type of component you programmed
for easy reverence.
Using Automatic Code Search
The lollowmg instructions can be used to program the minute to cnntml
tho TV, VCR or DVD. If you want to exit the rititnmalic code search
without programming any of vour components, press the CLEAR key
until the LED (rt-d llghll turns till.
I 'Itlm tin the component you want It) ctmtnll ("IV, VCR
or DVD)
2 Press and hold the component key ynu want to program.
while holding the component key, press and hold ON-OFF
until the LED on the mmute control turns on, then rvle'rlse
both keys
NWTI'wAUXI rnil Aux: keys can liniy tu- pmgramnud usuip Din“ tinin Modi-
see pngr 7 tor detail:-
,,.
. Point the rcrrintc at the component, press and release PLAY, then wait
five seconds or until the LED stops flashing,
At this point the remote control is watch"); tor the cunt-cl code to
program. ll, after five seconds, the component you want to cnntml
docs not turn off, press and release PLAY again to tell the remote to
search the nan not of codes
Continue pressing and mlccisiiip PLAY until the component turns off
or yuu have searched through all of the codes. l'hcrc are 20 sets of
codes. it the component does not turn otl ahcr pressmg my 20
times, then thr- wmiitc cannot control that particular component
It the component you want to control dots turn off:
1. Press and relcage REVERSE, then wait two socuiidskcpeat this step
unlll the component turns back on.
2 Tu llnish, pm“ and htrlcl STOF until the LFD on the tomato control
tum: oft
Using The Remote To Control A Component
Bcciluw this univu -.il rcrnotc can control several illitercnt components
(W, thR, DVD, etc), it uses operational modes triggered by the
component keys l-or example, it you want the rt-mott- to control the TV.
you would pre>s the TV key to put the remote inln TV Mode. Thcn, it
you want to play a videotape, press vcn then PLAY (pointing the
remote at the VCR).
Changing The RF Remote Control Code
Your remote control is equipped with Rl’ functionality. This means
that the rcmnte can control the digital satellitc rccctver using botli lR
(mtraredi signals and RF (radio frequencvl signals it it is equipped with
an RF reccivcr IR signals mauirc lino-of-sight to the receiver's front
panel rcrnote sensor. RF signals can control the receiver from oiher
parts of your house, even through walls. lmtalling your RF remote
control antenna will increase the range ot your RF remote signal. Sec
the owner's manual of your was system (or more details.
Not-z rhu feature is tml) appllcahle trir RCA lercrv dimtrl unrlliie receivers
if you are experiencing interference irnm other RF components. you
may need In than e the RF remote comm! code To chatty the ctule
tirs't in your satellite receiver, do the following:
Changing The RF Remote Control Code (Continued) Troubleshoo g
1. Select Options in the Main menu
so
. Select System Options.
3 Select RF Remote.
4 If you nonnally use the SAT key on your remote to connnl your RCA
sdtt‘llite receiver, choose A number between 000 and 755. Follow the
on-an‘l‘n Inslmk‘t‘lons to enter this number as your RF remote control
code. However, it you use the AUX1 or AUX2 key, choose a number
between 000 and 099.
Then, to Change the code on your rcmotc to match the satellite receiver,
perform the lulluwu’ig:
l. Press and hold the SAT kcy, mm, or Auxz key (depending on
ivliich kcy you use tn control your satellite roceiverl,
z llien use the Dlgll keys to enter the oiinc RF remote control
rode (000-255 tor SAT), or (00me for Au)“ or AUXZ) on your
mmtltv Conlml
The Menu function is used to make changes in the selected settings,
such as setting color. channels, timer, etc the MENU kcy displays TV,
DVD player, and 055 menu screens on your TV. Each Menu tuner-ion
will vary from brand to brand.
ENTERING TNE MENU MODE m iv
| Push the component key on the
. r
remote for the desired menu screen. “V“ ‘V‘ “” “‘
(dufig/
2. Push the MENU key This allows van
to View the menu of the chasm
component The menu should
now he visible on your television
mu luau
Non: with some punch you md) iuiu n. puss
ihe GUIDE in mm kcy tn iiie fin—st run menu
3. While in MFNU Mode, these
kcys will function as follows:
Navigation LEFT/RIGHT keys will
npcraie as eursnr right and left. —
Navigation upmowu keys Will
operate as cursor up and down
mu \_/
MENU or 0K key applies the
highlighted menu item,
Not all functions ln all models and
brands of equipment may be fully supported.
EXITING THE MENU MODE
To exit! the MENU Mode and clear the
screen on your TV. push tho CLEAR key. "m
Problun: the remote un'l be
mumed to out“ your
m"llflmfl't
~ you may he tiki irr away inun thi-
coinponcnt or at a wrong angle This
remote iises lR (intramd) technology
in communicati- with components
The remote sends the code and thr-
cornpiiiiuni's IR rut'nsnt roads thi-
cndc Thercicrc, them must be an
iinntnii—uctcd pain herwicn the
tumult“ and the [R sen-stir an rhu-
ruiriponcnt. Mnyc closi-r and make
sure you poim the iuniiirciit thc
rnmpunenr (VCR when
plugmmmmg ihevcn kcy, DVD
when pingrai-iimini; the nvn kt-y,
TV when pmgmmming the TV key,
satcllne rvttviver when pnncmmminp
the SAT kerl
- Il you‘ve ciiieruri all iii the cooks
tor your biand that are in the
cnc . ~d Code I ists and tollowcd
the instructions, try the Automatic
Code Search method (See Usmg
Automatic Code Search on page tit
~ You musi put the remote in the
rnricci mode by pressing ihe
cni-nsprinduig component key (W,
VCR. DVD. SAT. Auxi, Auxzi so
the remote knows which (umpunenl
vnu wunt to npemt.
- lii pmprum ilu- uniiiisal remote
to operate a cnmbmarinn urul
tI'V/VCR or lvmvm, ii i try lhl'
VCR or DVD codes tar your brand.
Sumo units. liowcvcr, require that
you program turn. the w lltslflg thc
w codes; and the van or Two
(using the VCR or DVD codcsi tor
tull operation.
- Tn pmgrilm the uniyunsai immut-
in operats a combination unit (VCR
mm), nisi program your VCR
Lung the vow key and ihen program
your DVD using the DVD kev.
mm: The hm light doe-
nmll'Mwhenyoupmslltey.
- you must put the remote in the
atria-t mode by phasing tlii-
rompnndmg component key
(TV, VCR. DVD. SAY, AUXl. Auxzi
so the rcmoic knows which
component vtlu want in operati-
- Vou may have prcsscd an invalid
key tor the mode the remote is in
(cg , (he RECORD key only works
in VCR Model.
- Maki- mm the baht-runs are properly
installed. (See battery installation
on page 3).
- Replace the haitcncs with two new
AA batteries. Reprogrammlng may
be required.
Problem m minim dofi not open:
your «important
You must put the remote m the
(0me moor hy- pn‘fw‘mg the
Lurrespandlng cnmpnmnit key (TV.
VCR. wt). SAY, AUX1. AUXZ) so
the rcmote knows whuh component
you want to operate.
- Rt-mtlvc any obsrnles bulwc-t'n nir-
n-mute and the componcni Make
sun- to aim the remoiu at ihr in
sensor an the component
r iyiiike ~um the hattenes are properly
insialled (hue Battery installation
on page 3)
- kuplarv Ilw tiaiicrics icuh nvo new
AA batteries. Ropmgramnung may
be iciiuncd
- Reset the remote Remove the
batteries ‘l‘hcn press and hold
rho number t key on the remote
tor several seconds to reset the
micnipnicessnr inside ihu rennin-
Release the number 1 key, rcuistall
the batteries, and try ths icmoio
again. Repnipramminp will
be mquln‘d
Problem: the rum-m ls not
palmln‘ command! poop-iv.
You mu~t put ihr remnie in ihe
ccricct mode by pressing the
corresponding compuncni key ml,
VCR. DVD. SAY. Au)“, Auxzi so
the remote knows wturh curriponeni
you want to operate
- Make suru the component is "ready"
in y, , DVD player has disc loaded,
VCR has iapc loaded, etc i.
- You may have pruned an invalid
key tor the mode the n-mon- is in
(e.g., the nEoonn key oruy works
in VCR Model
- it you am- trying to him on an RCA,
cc. ur PRUSCAN component, press
thc component key (TV. VCR, Dvu.
SAT. Auxi. Aule instead of the
ONDFF key-
- it you're l‘rymg to change channels,
try prissmp the OK key utter
entering the channel number as this
is .i rcquircmuni of Cl’rtrun models
and brands
- There is a pucuibiliry that a
pinyramnied code may oiuy ht- ahle
iri cantrol mum of your component
locum-vs (cg, only iums .i
component on and off). ruuaw the
firm. pmut‘ll’d tor pnipmminnip the
rs-mntc (Sw nglammmg sections
on pages wt ii the component can
be tiirnro on and oil, make sure you
pms the cue/cu» key in see ll the
component responds It not. try the
next code from the list.
lO—_—
T uble oo rig lCon Lied)
Problem: “I! VCN won't Md.
- As a satciy nature, you mini
press lht- RECORD key twice in
lupin recording
- Makc sure the tape is prupcily
liiadcd in the VCR
~ Make sure ihe tripe is not
wriie-pnitciti-d Il the safety Idh
is n-iiioyi-d, ilii- rapc is wriic-
pnrtm ted and you cannot record
(into |l|(|l hipo.
Mblem: “to remote lllll not change
(tunnels
- you mint pin the remote in the
rnrrcci modriiy picssinp ihi-
cornspoiidinu component key
(TV. VCR. uvn, SAT, Auxi. AUXZ)
so the n~moic knows which
riiiiipom-ni you nuiii to opt-nin-
- l’rt-ss thc OK kcy dllcr you enter a
channel iiiinihcr
noble-i: me (mum’s menu
dom'l lpput on like TV sine-i.
- flu» iv must b.- iuiicd io ihe Video
input thai matches the manner in
wlutll you runnccicd the
component in the Tv
roi emmplu, it you coriiivciiil your
DVD player in your l\ tiy
iniinm iirip rudin/yidcn tilhll“
(usually fillur'sodt-tl vellnvy, nd and
wlillcl in the ‘rvx input 1 luck, you
musi quw the iv in us vitriol
lnpui clunnel Remember, dinercni
maiinmcnirurs label thcu- |rttk~
riiiirrcnily Consult the instruenoii
manual that mam wiih thew for
more iniorninnon
~ You must put the rcinuic iri iriu
torn-ct niodr- tn- pnssinp the
(Dfll’hplmdlng component key (TV.
VCR, DVD. SAT, AUXI, Auxzt so
the rumor knows which tnmptlm-nl
you want to operate
- kit-nu attics isn't supported in.
dll brands Jl that's Itu- ml
nissl in use your (tngttml rumour
control to acctss menu tuncrions
tor ilusc connmncnn
Please visit www.rca.cnm
m ted et me Warranty
Our company (in the U s., THOMSON lNC. / in Canada, Thomson
multimedia l td ) Wlll rcplacc this product, regardless of how long
you, the original purchaser, own ii it found In ht- deto-(iyc in
materials or workmanship, For a prompt. no charge replacement or
urpiivaleiit product, “mm the delm‘llvt- product pmldgt' pit-paid iii
the appropriate uddmss.
lit the US‘
l‘mducl Exchringo Center
11721 Alameda Avenue
Socorro TX 7th7
ln Canada:
llicirnson inultrnudia Lid.
nzlltl Edwards Boulevard
Mississauga, Ontario
Ldnadz le 2v7
l’his replaconicni is the company‘s solo obligation under this
warranty. THOMFlclN INC. / Thomson multimedia Ltd. will not be
rl‘opmhll’llk‘ for any incidental or coiisorpu-iituil damages or for any
1 es nosing in connection wrth the use or inability to use this product.
Home strum/provinces d" nivl allow the t'xt‘luimn or limitation oi
incidiuiial or consequential damagt , so Lhe above limitation or
exclusion may not apply to you ‘lhis warranty excludcs detects or
ddmagu due to mouso. aliuse, or neglm. Thu warranty gives you
spin-inc lipal rights, and you may also hayc nuier rights, which vary
lnim state in stalc/ province to provinc
ll
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 ofthe FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in aecordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference
will not occur in a partieulari smllation. “this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
El Reorient or relocate the receiving antenna.
D Increase the separation between the equipment
and receiver.
1] Connect the equipment into an outlet on a circuit
different from that to which the receiver is needed.
El Consult the dealer or an experienced radio/TV
technician for help.
The term “ [C “ before the radio certification number only
signifies that industry Canada technical specification were met.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 About : uuid:dcab16ef-a2f1-48c1-a037-9e6dd0acda8a Producer : Corel PDF Engine Version 10.410 Modify Date : 2005:08:23 08:33:06+08:00 Create Date : 2005:05:25 14:46:31Z Creator Tool : CorelDRAW Version 10.0 Metadata Date : 2005:08:23 08:33:06+08:00 Document ID : uuid:5e1f6965-de47-4609-97b9-8c8539646dd7 Instance ID : uuid:958bb122-ec66-4d1a-9187-81c85feb18ac Format : application/pdf Title : Instruction Book D770 Creator : Dadang Asikin Page Count : 4 Author : Dadang AsikinEXIF Metadata provided by EXIF.tools