Technicolor Connected Home USA RS2100B USB Transmitter for 2.4GHz Wireless Audio System User Manual RS2100 EN 14 06 06

Technicolor Connected Home USA LLC USB Transmitter for 2.4GHz Wireless Audio System RS2100 EN 14 06 06

user manual

RS2100
user
manual
It is important to read this instruction book prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su euipo.
FCC Information
EN
FCC Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
In accordance with FCC requirements, changes or
modifications not expressly approved by Thomson Inc.
could void the user’s authority to operate this product.
This device generates and uses radio frequency (RF)
energy, and if not installed and used properly, this
equipment may cause interference to radio and
television reception.
If this equipment does cause interference to radio or
television reception (which you can determine by
unplugging the unit), try to correct the interference by
one or more of the following measures:
• Re-orient the receiving antenna (that is, the antenna
for the radio or television that is "receiving" the
interference).
• Move the unit away from the equipment that is
receiving interference.
• Plug the unit into a different wall outlet so that the
unit and the equipment receiving interference are on
different branch circuits.
If these measures do not eliminate the interference,
please consult your dealer or an experienced
radio/television technician for additional suggestions.
Also, the Federal Communications Commission has
prepared a helpful booklet, "How To Identify and
Resolve Radio TV Interference Problems." This booklet
is available from the U.S. Government Printing Office,
Washington, DC 20402. Please specify stock number
004-000-00345-4 when ordering copies. This product
complies with DHHS Rules 21 CFR Subchapter J.
Applicable at the date of manufacture.
For Your Safety
The AC power plug is polarized
(one blade is wider than the other)
and only fits into AC power outlets
one way. If the plug won’t go into
the outlet completely, turn the
plug over and try to insert it the
other way. If it still won’t fit,
contact a qualified electrician to change the outlet, or
use a different one. Do not attempt to bypass this safety
feature.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Main plug is used as the disconnect device, it shall
remain readily operable and should not be obstructed
during intended used.To be completely disconnected the
apparatus from supply mains,the main plug of the
apparatus shall be disconnected from the mains socket
outlet completely.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
For mp3 player only
RECORD
Have a Blast- Just Not in Your
Eardrums
Make sure you turn down the
volume on the unit before you put
on headphones. Increase the volume
to the desired level only after
headphones are in place.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la class B est conforme à
la norme du NMB-003 du Canada
RCA
RD2100
Equipment tested for
compliance as a
complete unit
FCC Information
EN
The descriptions and characteristics given in this document are given as a general indication and not as a guarantee.
In order to provide the highest quality product possible, we reserve the right to make any improvement or
modification without prior notice. The English version serves as the final reference on all products and operational
details should any discrepancies arise in other languages.
Technical specification
Product: 5CD Audio System with mp3 Player
Brand: RCA
Model: RS2100(Audio System)/RD2100(mp3 player)
Electrical Consumption:
Power Supply: 120V~60Hz
Power consumption: 150 Watts
IMPORTER
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
For Your Records
In the event that service should be required, you may
need both the model number and the serial number. In
the space below, record the date and place of purchase,
and the serial number:
Model No.
Remote Control No.
Date of Purchase
Place of Purchase
Serial No.
Service Information
This product should be serviced only by those specially
trained in appropriate servicing techniques. For
instructions on how to obtain service, refer to the
warranty included in this Guide.
WARNING: TO PREVENT FIRE OR ELECTRICAL
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USER-
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
Portions based upon Microsoft Windows Media Technologies. Copyright © 1999 Microsoft Corporation. All Rights
Reserved. Microsoft, Windows Media, and the Windows Logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Main unit
FCC ID:G95RS2100
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received,
including interference that may cause undesired
operation.
Remote controller
FCC ID:G95RS2100A
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received,
including interference that may cause undesired
operation.
USB dongle
FCC ID:G95RS2100B
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received,
including interference that may cause undesired
operation.
Important Information
Safety Precautions
• Never open the cabinet under any
circumstances. Any repairs or internal
adjustments should be made only by a trained
technician.
• Never operate this product with the cabinet
removed.
•Do not use your System immediately after
transporting it from a cold place to a warm
place, as condensation may cause the system to
malfunction.
• Keep your unit away from humid areas and
abnormally hot places.
• Do not touch the player with wet hands. If
any liquid enters the player cabinet, take the
player to a trained technician for inspection.
• This compact disc player uses a laser to read
the music on the disc. The laser mechanism
corresponds to the cartridge and stylus of a
record player. Although this product
incorporates a laser pick-up lens, it is
completely safe when operated according to
directions.
• Discs rotate at high speed inside the player. Do
not use damaged, warped, or cracked discs.
• Do not touch the pick-up lens which is located
inside the disc compartment. To keep dust
from collecting on the pick-up lens, do not
leave the compartment door open for an
extended period of time. If the lens becomes
dirty, clean it with a soft brush, or use an air
blower brush designed for camera lenses.
• The apparatus shall not be exposed to dripping
or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
•Minimum distances around the apparatus for
sufficient ventilation .
•The ventilation should not be impeded by
covering the ventilation opening with items,
such as newspaper,table-cloths,curtains,etc.
•No naked flame sources,such as lighted
candles,should be placed on the apparatus.
•Attention should be drawn to the
environmental aspects of battery disposal .
Precautions for the mp3 Player
• Do not use the unit immediately after
transportation from a cold place to a warm
place; condensation problem may result.
• Do not store the unit near fire, places with
high temperature or in direct sunlight.
• Do not operate or store unit in places with
frequent static electricity or electrical noise
(e.g. speaker, TV set).
• Clean the unit with a soft cloth or a damp
chamois leather. Never use solvents.
• The unit must only be opened by qualified
personnel.
Note:
This unit may temporarily cease to function
if subjected to electrostatic disturbance. To
resume normal operation, it may be
necessary to cycle the power off and back on
or to remove and reinstall the batteries.
EN
Important Information
Important Battery Information
• Remove the batteries to avoid leakage if you
do not use your remote control for more than
one month.
• Discard leaky batteries immediately as leaking
batteries may cause skin burns or other
personal injuries. Dispose of batteries in the
proper manner, according to provincial and
local regulations.
• Any battery may leak electrolyte under the
following circumstances:
- if mixed with a different battery type,
- if inserted incorrectly,
- if all batteries are not replaced at the same
time,
- if disposed of in fire, or
- if an attempt is made to charge a battery not
intended to be recharged.
Headset Safety
• Do not play your headset at high volume.
Hearing experts warn against extended high-
volume play.
• If you experience ringing in your ears, reduce
volume or discontinue use.
• You should use with extreme caution or
temporarily discontinue use in potentially
hazardous situations.
Even if your headset is an open-air designed to
let you to hear outside sounds, do not turn up
the volume so high that you are unable to
hear what is around you.
Caution While Driving
Use of headphones while operating an
automobile or moving vehicle is not
recommended and is unlawful in some states and
areas. Be careful and attentive on the road. Stop
operation of the unit if you find it disruptive or
distracting while driving.
Please Respect the Environment!
Before throwing any batteries away, consult your
distributor who may be able to take them back
for specific recycling.
Don’t Infringe
This product should only be used for the purposes
for which it is sold, that is, entertainment,
violating no copyright law. Any attempts to use
this product for which it is not intended is
unlawful and therefore not condoned by
Thomson.
EN
EN
Table of Contents
1
FCC Information
Important Information
Table of Contents . . . . . . . . . . . . . .1
Getting Started . . . . . . . . . . . . . . . 2
Content of Box . . . . . . . . . . . . . . . . . . . . . . . . . .2
Connections of Antennas and Speakers . . . . . 2
General Controls . . . . . . . . . . . . . . . 3
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Navigation Buttons . . . . . . . . . . . . . . . . . . .4
Music Navigator Remote . . . . . . . . . . . . . . . . . .5
Navigation Buttons . . . . . . . . . . . . . . . . . . .5
Display . . . . . . . . . . . . . . . . . . . . . .7
Settings . . . . . . . . . . . . . . . . . . . . . . 7
Setting the Clock and Timer . . . . . . . . . . . . . . .7
Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Sound Features . . . . . . . . . . . . . . . .8
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . 8
Bass Boost and Equalizer . . . . . . . . . . . . . . . . .8
Program Recording . . . . . . . . . . . . . . . . . . . . . .8
CD and mp3 Disc Playback . . . . . . . 9
Loading Discs . . . . . . . . . . . . . . . . . . . . . . . . . .10
Play/Pause/Stop Discs . . . . . . . . . . . . . . . . . . . .10
Skipping/Scanning Tracks . . . . . . . . . . . . . . . .11
USB and mp3 Playback . . . . . . . . . .11
Connecting/Disconnecting USB device
/mp3 player to the Main Unit . . . . . . . . . . . . .11
Selecting USB or mp3 player Mode . . . . . . . .11
USB/mp3 player Playback Features . . . . . . . .12
Memory Usage . . . . . . . . . . . . . . . . . . . . . . . . .12
Radio . . . . . . . . . . . . . . . . . . . . . . . . . .12
Selecting Tuner Band . . . . . . . . . . . . . . . . . . . .12
Tuning to a Station . . . . . . . . . . . . . . . . . . . . . .12
Using Presets . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Auto Preset Programming . . . . . . . . . . . . . . . .12
Manually Setting Presets . . . . . . . . . . . . . . . . .12
Recording to the mp3 player . . . .13
Recording CD to mp3 player . . . . . . . . . . . . . .13
Recording Tuner/AUX to mp3 player . . . . . . .13
Program Recording . . . . . . . . . . . . . . . . . . . . .13
Recording to USB device . . . . . . . . . . . . . . . . .14
Deleting files from mp3 player/USB device . .14
Wireless Musiclink . . . . . . . . . . . . .??
WAITING INFO
Advanced Playback Controls . . . . .15
Intro/ Repeat/Random . . . . . . . . . . . . . . . . . . .15
Setting Up a Program List . . . . . . . . . . . . . . . .15
Advanced Navigation Controls . . .16
Tips on Playback Sequence of Disc . . . . . . . . .16
mp3 Player . . . . . . . . . . . . . . . . . . .17
Turn On/Off the Player . . . . . . . . . . . . . . . . . . .17
Playback Controls . . . . . . . . . . . . . . . . . . . . . . .17
Adjusting the Volume . . . . . . . . . . . . . . . . . . .18
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
DSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Play modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Frequently Asked Questions . . . . . . . . . . . . . .18
Troubleshooting Tips . . . . . . . . . . .19
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
mp3 Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Maintenance . . . . . . . . . . . . . . . . .21
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Handling CDs . . . . . . . . . . . . . . . . . . . . . . . . . . .21
CD Lens Care . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Technical Specification . . . . . . . . . . . . . . . . . . .21
Warranty . . . . . . . . . . . . . . . . . . . .22
EN
Getting Started
2
Content of Box
•one main unit (with 2 main speakers);
•one remote control;
• one AM loop antennas;
• one mp3 Player;
• one set of earphones;
• one USB cable;
• one Wireless Music-link transceiver;
• one user manual;
• one safety leaflet;
• Owner registration Card.
Connections of Antennas and
Speakers
1. Wireless Music-link antenna.
2. AM Loop antenna Jacks.
3. FM Pigtail Antenna.
4. AUX IN.
5. Main Speaker Jacks.
Using the FM and AM Antennas
Before you use your audio system, you’ll want to
make sure both the FM and AM antennas are
positioned properly. Uncoil the FM antenna at
the back of the unit, making sure it is fully
extended (you may even want to tape it to the
wall behind the unit if possible. The higher the
better.) You’ll also need to connect the AM
antenna loop to the back of the unit if you listen
to AM stations. Rotate the AM loop antenna for
better reception.
Connecting the Speakers
Each speaker has a black (negative) and a red
(positive) jack. When connecting the speakers,
match the red wires to the red jacks and the
black wires to the black jacks.
Installation
To ensure sufficient ventilation, keep the
spacings shown below free from other surfaces:
Note:
Make sure the tracks are encoded in mp3
or Windows Media formats and supported
bitrates. Bitrates supported by the player:
mp3 – 32 to 320kbps
wma – 48 to 160kbps
Warning:
Use of this product is for your
personal use only. Unauthorized recording
or duplication of copyrighted material may
infringe upon the rights of third parties and
may be contrary to copyright laws.
!
Release tab to lock wire in
the terminal.
NOTE: Make sure the insulation is completely removed from the
ends of the speaker wires at all connection points.
Speaker Wire Connection
Push Speaker terminal tab
down to insert wire.
4 inches
4 inches
Front View
4 inches
4 inches
2
inches
Side View
1
23
4
5
EN
General Controls
Main Unit - Front View
ON/STANDBY - Turns power on or off (STANDBY
mode).
SOURCE - Selects among CD player, TUNER, PC,
PORTABLE PLAYER, USB and AUX.
RECORD MP3 PLAYER - Starts and stops
recording to mp3 player.
RECORD USB - Starts and stops recording to USB
device.
USB socket - Connects USB device.
mp3 player - Connects mp3 player.
(SKIP BACKWARD) - In CD, Portable
Player, USB or MP3/WMA mode - Goes to the
previous track; searches backward through track.
In Tuner mode - Tunes down radio frequency.
In Clock or Timer mode - Decreases hour and
minute digit.
(SKIP FORWARD) - In CD, Portable Player,
USB or MP3/WMA mode - Goes to the next
track; searches forward through track.
In Tuner mode - Tunes up radio frequency.
In Clock or Timer mode - Increases hour and
minute digit.
In Tuner mode - Tunes up radio frequency.
(PLAY/PAUSE) - In CD, Portable Player, USB
or MP3/WMA mode - Starts and pauses playback.
/TUNE PRESET - In CD, Portable Player, USB or
MP3/WMA mode - Stops playback.
In MP3/WMA mode - Returns to the first track of
the current disc in stop mode; displays the total
number of folders and total number of tracks on
the current disc when playback is completely
stopped.
In Recording mode - Stops record to USB device;
In Tuner mode - Selects tune or preset mode.
BAND/INFO - In CD mode - Selects display
options to show track elapse time, track remain
time or disc remain time. During recording,
selects display options to show record time and
remaining time.
In Portable Player, USB or MP3/WMA mode -
Shows ID3 tag.
In Portable Player or USB mode - Shows memory
usage.
In Tuner mode - Selects radio band. Enters auto
preset program in FM mode when depressed for
2 seconds.
DISC SKIP - Skips to the next disc in CD mode.
DISC 1 / DISC 2 / DISC 3 / DISC 4 /
DISC 5 - Opens or closes the corresponding
disc tray if no disc is loaded in the corresponding
tray.
Enters CD mode and plays the corresponding CD
when disc is loaded in the corresponding tray.
3
Tips:
In STANDBY mode, press
ON/STANDBY to turn the system on in the
previously used mode. Press SOURCE to
select the corresponding mode. Look at the
display icons to identify the current mode.
EN
General Controls
4
VOLUME CONTROL - Adjusts volume.
In navigation mode - Rotate clockwise to
navigate downwards and rotate counter-
clockwise to navigate upwards.
Navigation Buttons
Use the navigation buttons to navigate through
menu.
MENU - When reviewing program, removes track
from Program List.
In CD, Portable Player, USB or MP3/WMA mode -
Removes file from the connected USB device or
mp3 player.
(UP)- In Portable Player, USB or MP3/WMA
stop mode - Enters navigation mode.
In navigation mode - Goes to the previous folder
in stop mode.
In navigation mode - Navigates upwards; moves
up a list; selects the previous file or folder.
In tuner mode - Selects the previous preset
station; selects the next preset number.
In rename mode - Selects alphabets.
In navigation mode - Navigates upwards and
move up a list.
In tuner mode - selects the next preset number.
In rename mode - selects alphabets
(DOWN)- In navigation mode - Navigates
downwards and move down a list.
In tuner mode - Selects the previous preset
number.
In rename mode - selects alphabets
SELECT (RIGHT)- In Portable Player, USB or
MP3/WMA stop mode - Enters navigation mode.
In navigation mode - Moves down one navigation
menu level; enters current folder and shows the
first file/folder from current folder; begins
playback of the selected file in navigation mode.
In tuner mode - Selects the previous preset
station; selects the next preset number.
In rename mode - Confirms the current alphabet
and move to the next alphabet.
BACK (LEFT)- In navigation mode - Returns
to the previous navigation menu level; returns to
stop mode.
In rename mode - Edits the previous alphabet.
Main Unit - Top View
PHONES - Jack for connecting headphones.
DEMO - Activates and deactivates demonstration.
Note:
Refer to “mp3 Player” section on
page 17-18 for mp3 player operation details.
EN
General Controls
Music Navigator Remote
Basically, the LCD of the remote shows briefly the
screen of the main unit.
ON/STANDBY - Turns power on or off (STANDBY
mode).
SOURCE - Selects among CD player, TUNER, PC,
PORTABLE PLAYER, USB and AUX.
MUTE - Mutes audio output.
MENU - When reviewing program, removes track
from Program List.
In CD, Portable Player, USB or MP3/WMA mode -
Removes file from the connected USB device or
mp3 player.
VOLUME CONTROL - Adjusts volume.
In navigation mode - Rotate clockwise to
navigate downwards and rotate counter-
clockwise to navigate upwards.
(SKIP BACKWARD) - In CD, Portable
Player, USB or MP3/WMA mode - Goes to the
previous track; searches backward through track.
In Tuner mode - Tunes down radio frequency.
In Clock or Timer mode - Decreases hour and
minute digit.
In Recording mode - selects ripping speed.
(SKIP FORWARD) - In CD, Portable Player,
USB or MP3/WMA mode - Goes to the next
track; searches forward through track.
In Tuner mode - Tunes up radio frequency.
In Clock or Timer mode - Increases hour and
minute digit.
In Recording mode - selects ripping speed;
In Tuner mode - Tunes up radio frequency.
(PLAY/PAUSE) - In CD, Portable Player, USB
or MP3/WMA mode - Starts and pauses playback.
TUNE/PRESET - In CD, Portable Player, USB or
MP3/WMA mode - Stops playback.
In MP3/WMA mode - Returns to the first track of
the current disc in stop mode; displays the total
number of folders and total number of tracks on
the current disc when playback is completely
stopped.
In Recording mode - Stops record to USB device;
In Tuner mode - Selects tune or preset mode.
CD 1/CD 2/CD 3/CD 4/CD 5 - Direct accesses the
corresponding disc.
BAND - In Tuner mode - Selects radio band.
Enters auto preset program in FM mode when
depressed for 2 seconds.
LCD ON/OFF - Turns LCD on or off.
REC USB - Starts recording to USB device.
5
EN
General Controls
6
REC P. PLAYER - Starts recording to mp3
player.
FM STEREO - Selects between stereo and mono
sound in FM tuner mode.
INFO - In CD mode - Selects display options to
show track elapse time, track remain time or disc
remain time. During recording, selects display
options to show record time and remaining time.
In Portable Player, USB or MP3/WMA mode -
Shows ID3 tag.
In Portable Player or USB mode - Shows memory
usage.
EQ - Selects equalizer presets.
BASS BOOST - Turns on or off Bass Boost.
PROGRAM - In CD / USB and Tuner mode - Enters
program mode.
REPEAT - In CD mode - Repeats a track, CD or all
CDs.
In Portable Player, USB or MP3/WMA mode -
Selects repeat one file, repeat all files mode.
INTRO - In CD, Portable Player, USB or MP3/WMA
mode - Turns intro mode on or off to play the
first 10 seconds of each track / file.
- In CD, Portable Player, USB or MP3/WMA
mode - Turns on/off random playback.
CLOCK - Displays clock time. Press and hold to
enter clock setting mode.
TIMER - Enters timer setting mode.
Activates and deactivates timer.
SLEEP - Selects the time interval in minutes
before the unit turns off.
DISC SKIP - Skips to the next disc in CD mode.
Navigation Buttons
SELECT (RIGHT)- In Portable Player, USB or
MP3/WMA stop mode - Enters navigation mode.
In navigation mode - Moves down one
navigation menu level; enters current folder and
shows the first file/folder from current folder;
begins playback of the selected file in navigation
mode.
In tuner mode - Selects the previous preset
station; selects the next preset number.
In rename mode - Confirms the current alphabet
and move to the next alphabet.
BACK (LEFT)- In navigation mode - Returns
to the previous navigation menu level; returns to
stop mode.
In rename mode - Edits the previous alphabet.
Installing Batteries
The remote control must be inserted with 2
"AAA" or "UM-4" or "R03" batteries prior to
use. Follow the steps below to ensure correct
installation.
1. Open the battery compartment door by
pressing down on the tab and then lifting the
door out.
2. Insert “AAA”(UM4) batteries in the
compartment.
3. Replace the battery compartment door in
place.
Setting the Clock
1. Press and hold CLOCK on the remote control
to set the clock.
2. Press or to set the time. Press
CLOCK again to save settings.
Setting the Timer
You can turn on/off the unit or record TUNER at
preset times by setting the timer.
1. Press and hold TIMER on the remote control
until Timer On and the clock hour flashes on
the display.
2. Press or to set the time.
3. Press TIMER.Repeat step 2 to change to Timer
Off setting with clock hour flashing. .
4. Press TIMER to select source. Press or
to select CD/USB/Tuner/Rec Tuner.
If Rec Tuner is selected, press or to
select the preset station.
5. Press TIMER. Adjust VOLUME CONTROL to set
volume.
7. Press TIMER to save and quit setting. The timer
is automatically activated once timer
setting is saved.
EN
Display
CD/TUNER/PC/PORTABLE PLAYER/USB/AUX -
indicates the current mode.
- The corresponding disc icon lights to show
which disc compartment is loaded. The current
playing disc will flash.
mp3 / WMA - Current CD format.
PROGRAM - In program mode.
- Currently in playback mode.
- Currently in pause mode.
- Random playback is activated in CD mode.
STEREO - In FM tuner mode, indicates stereo
sound is selected.
EQ - Current equalizer setting.
B.BOOST - Bass boost is activated.
SLEEP - Sleep is activated.
- Timer is activated.
REC - Recording is activated.
INTRO - In CD mode, intro is activated so the first
10 seconds of each track will be played.
REPEAT 1/REPEAT 1 DISC/REPEAT ALL
DISCS/ALL DISCS - In CD mode, indicates the
repeat option that is activated.
REPEAT 1 - Repeats current track.
REPEAT 1 DISC - Repeats current disc.
REPEAT ALL DISCS - Repeats all discs.
ALL DISCS - Plays all discs once.
Note:
When system is ON, you can press
CLOCK to display the current time for about
2 seconds.
7
Settings
EN
Settings
8
Activating the Timer
Press and release TIMER to turn on/off the alarm.
is displayed when timer is activated.
Program Recording
When setting the Timer, select “Rec Tuner” as the
source to preset the unit to record radio at the
preset time. Make sure the mp3 player is
connected and have enough memory space.
Sleep Mode
You can select the time interval before the unit
turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
SLEEP is displayed when sleep mode is activated.
Viewing Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time.
Adjusting Sleep Time
Press SLEEP again when the remaining sleep time
is displayed to change sleep time.
Tips:
“Rec Tuner” setting is for Program
Recording. For more information, see
paragraph below.
Note:
Sleep is automatically de-activated
when the unit is turned off.
Volume Control
Rotate the volume control on the main unit or
press VOL or on the remote control to
adjust volume level.
Bass Boost
Press BASS BOOST to turn on/off boosting the
bass frequency. B.BOOST is displayed when it is
activated.
Muting Audio
Press MUTE on the remote control to cut the
sound. MUTE flashes on the display.
Using Preset Equalizer Curves
Press EQ to toggle among FLAT, ROCK, POP, JAZZ,
CLASSIC and CUSTOM. EQ is displayed when EQ is
activated.
Creating a Custom Curve
1. Press EQ to select CUSTOM mode.
2. While CUSTOM is displayed, press or
to cycle among displayed bass and treble
range levels.
3. While BAS and TRE is displayed, adjust volume
control to set the associated gain between
-10 - +10.
4. Press EQ to exit.
Sound Features
CD and mp3 Disc Playback
EN
9
Important CD and mp3/WMA
Information
This unit is compatible with
CD-RW/ CD-R discs for
playback.
CD-R / RW
Notes on CD-R/RW Disc:
•Do not affix any type of labels to either
side (recordable or labeled side) of a CD-
R/RW disc as this may result in the unit
malfunctioning.
• To avoid damages to the CD-R/RW disc, do
not open the disc compartment door while
the disc is being read.
• Do not load an unrecorded CD-R/RW disc
into the unit. This may take a longer time
to read the disc.
• Playback capability for CD-RW discs may
vary due to variations in the quality of the
CD-RW disc and the recorder used to
create the disc.
Notes on mp3/WMA Disc:
• Use .mp3 as the extension when
converting audio files into mp3 for saving
onto CD-R(W) or CD-ROM, e.g. Abc08.mp3.
Do not use any other extension e.g. .doc,
.pdf.
• Do not use the .mp3 extension for other
text or non-audio data files as this may
result in serious malfunction and harmful
noise interference.
• For better quality in mp3/WMA disc
playback, the CD quality should be
recorded 128kbps or above.
• Disc data size > 650MB is not
recommended.
• Total files and folders in the disc should
not exceed 250, it also depends on the
length of the file/folder names.
• For mixed mode discs, only one mode will
be selected for playback depending on the
recording format.
• To ensure good performance, wait until
the disc changer completely reads the disc
before proceeding.
• mp3 files in CD ROM EXTRA format disc
cannot be recognized.
EN
10
Loading Discs
1. Press SOURCE repeatedly to select CD mode.
2. Press DISC 1 /2 /3/ 4 /5 to open
the desired disc tray. (For example, press DISC
1to open disc tray 1)
3. Insert a disc with label face up.
4. Press DISC 1 /2 /3/ 4 /5 to close
the disc tray. (For example, press DISC 1 to
close disc tray 1)
5. Repeat steps 2-4 to load discs in all the disc
trays.
A Solid disc tray icon lights on the display
indicating that the corresponding tray is
occupied. The current disc tray icon flashes on the
display.
If the disc is a mp3 / WMA CD, the respective
mp3or WMA lights on the display.
Play Discs
• To play all discs in the disc tray
Press in stop mode to begin playback.
• To play a specific disc in the disc
tray
Press CD 12/3/4/5 on the remote to play the
corresponding disc.
• To play a specific track in the disc
Press or to select the track and
press to start playback.
Pause Discs
Press during playback to pause disc. Press
again to resume.
Play and load simultaneously:
1. While a CD is playing, press DISC 1 /2 /3
/ 4 /5 (except the current disc) to
open the desired disc tray. (For example, a CD
is playing in disc tray 1, press DISC 2 /3/
4 /5 to open the desired disc tray.)
2. Load or change discs for the trays.
3. Press DISC 1 /2 /3/ 4 /5 to close
the tray.
Stop Playback
During playback, press to stop playback.
The unit returns to navigation mode briefly
(approx. 10 seconds) before entering stop mode.
Selecting a Disc
Press CD 12/3/4/5 to direct access the
corresponding disc or DISC SKIP on the remote
to skip discs.
CD and mp3 Disc Playback
Attention:
Do not push to force closing of the
tray during CD playback or tray opening.
Note:
Be sure to remove all discs from the
disc compartment before moving or
transporting the unit.
Tips:
In TUNER, PC, PORTABLE PLAYER,
USB or AUX mode, the corresponding disc
will start playback when DISC 1 /2 /3
/ 4 /5 is pressed. If there is no disc
in the corresponding disc tray, the current
disc will be set to the next occupied tray.
Tips:
In CD stop mode, press to enter
navigation mode and show disc menu.
In CD navigation mode, press to return
to stop mode.
Skipping Tracks
• Press or to skip to the previous
or next track.
Scanning Tracks
•Press and hold or to search
through a CD while it is playing.
Program Playback
Refer to page 15 for details.
CD and mp3 Disc Playback
EN
11
The playback controls of USB devices and mp3
player are basically the same. Connect the devices
first and then you can start playback.
Connecting USB device to the
Main Unit
Insert the USB port of the USB device into the
USB connector of the main unit. Unplug the
device to disconnect.
Connecting the mp3 Player to the
Main Unit
1. Press and hold the lock button on the back of
the player and push the USB connector out
from the player.
2. Insert the USB port of the mp3 player into the
USB connector for the player of the main unit.
Disconnecting the mp3 player
from the Main Unit
Press eject button on the right side of the unit to
disconnect the player.
Selecting USB or Portable Player
Mode
Press SOURCE repeatedly to select USB or
PORTABLE PLAYER mode.
USB / mp3 player Playback
Features
Start and Pause Playback
Press to start and pause playback.
USB and mp3 Player Playback
Insert mp3 player here
Insert
USB
device
here
mp3
player
eject
button
Side View
Press to disconnect
player
EN
12
USB and mp3 Player Playback
Stop Playback
Press to stop playback. The unit enters
navigation mode for 10 seconds before entering
stop mode.
Skipping Files
• Press or to skip to the previous
or next file.
•Press and hold or to search
through a file while it is playing.
Memory Usage
Press BAND/INFO on the main unit or INFO on
the remote control to view memory usage on the
USB device or the mp3 player.
Tips:
In CD stop mode, press to enter
navigation mode and show disc menu.
In CD navigation mode, press to return
to stop mode.
Radio
Selecting Tuner Band
1. Press SOURCE to enter Tuner mode.
2. Press BAND to select between FM or AM Radio
band.
Tuning to a Station
Press or to select frequencies. Press
and hold or to scan frequencies.
Using Presets
The tuner can be in either TUNE or PRESET mode.
• Press TUNE/PRESET to toggle TUNE and
PRESET mode.
• Press or to access the previous
or next preset station.
Auto Preset Programming
(FM only)
Press and hold the BAND button for 2 seconds to
scan stations in FM band. The stations will then
be stored as preset channels. A maximum of 32
stations can be stored. Beware of your preset
channels being erased accidentally because the
scanning and storing process is automatic upon
pressing the button. You can stop the automatic
scan by pressing any button, but the erased
stations cannot be recovered.
Manually Setting Presets
1. Press TUNE/PRESET to enter TUNE mode.
2. Press or to access the desired
frequency.
3. Press the PROG button once and the most
recently accessed program location flashes on
the display.
4. If a different program location is preferred,
press or to move to the desired
preset number (1-32).
5. Press PROG to store the selected frequency at
that preset.
Suppressing Stereo Signal
Press FM. STEREO to toggle between FM mono
and stereo mode. STEREO is displayed in stereo
mode.
Tips:
Your audio system has 32 preset stations.
Tips:
Under PRESET mode, press or
can only access the preset
stations. Manually tuning is not accessible in
this mode.
Recording to the mp3 Player
Recording to mp3 player or USB device are
basically the same. You can record CD, Tuner or
AUX files to the mp3 player or USB device.
Recording CD to mp3 Player
1. Connect the mp3 player to the USB port, “USB
Connected” will show on the display of the
player.
2. In CD stop mode or CD navigation mode, press
RECORD MP3 PLAYER on the main unit or
press REC P. PLAYER on the remote
control. The unit will start playback and
recording will begin. REC is displayed.
3. Press , press RECORD MP3 PLAYER on the
main unit or press REC P. PLAYER on the
remote control to stop recording.
Example (Record one CD):
??? Pls advice the control ???
Example (Record all 5 CDs):
In CD stop mode or CD navigation mode, press
RECORD MP3 PLAYER on the main unit or press
REC PLAYER on the remote control.The unit
will start playback and recording will begin. REC
is displayed. (Make sure ALL DISCS mode is
selected by pressing REPEAT repeatedly)
Example (Record only selected
tracks from a CD):
1. Create a CD program by following instructions
under “Setting Up a CD Program” on page 19.
2. In CD stop mode or CD pause mode, press
PROG and then to enter program
playback mode. Playback and recording will
begin. PROGRAM and REC is displayed.
3. Press , press RECORD MP3 PLAYER on the
main unit or press REC P. PLAYER on the
remote control to stop recording.
Recording Tuner/AUX to mp3
Player
1. In Tuner or AUX mode, press RECORD MP3
PLAYER on the main unit or press REC P.
PLAYER on the remote control to start
recording.
Example:
1. In Tuner mode, select the station to record
(refer to page 12 for details).
2. Press press RECORD MP3 PLAYER on the main
unit or press REC P. PLAYER on the remote
control to start recording.
3. Press , press RECORD MP3 PLAYER on the
main unit or press REC P. PLAYER on the
remote control to stop recording.
Program Recording
Refers to ”Setting the Timer” on page 7.
Tips:
To view remaining time (Rem), press
BAND/INFO on the main unit or CD
INFO on the remote in recording mode.
13
EN
Note:
The encoding bitrate for tuner, CD and AUX
signal are as below:
CD / Aux : 128 kbps
Tuner : 96 kbps
Tips:
Recording stops automatically when
CD stops (For example: end of disc is reached).
Tips:
If CD playback is already started,
recording will begin instantly when
RECORD MP3 PLAYER on the main
unit or press REC P. PLAYER on the
remote control is pressed. If CD playback is
stopped, playback and recording will start
instantly when RECORD MP3 PLAYER on the
main unit or press REC P. PLAYER on the
remote control is pressed.
Recording to the mp3 Player
14
EN
Recording to USB Device
Follow the steps of “Recording CD/Tuner/AUX
to mp3 player” in the last section by pressing
RECORD USB on the main unit or REC USB
on the remote control instead of RECORD MP3
PLAYER on the main unit or press REC P.
PLAYER on the remote control.
Deleting Files from mp3
Player/USB device
1. In navigation mode, select the file to delete
using the navigation buttons. (Refer to
“Navigation Buttons” on page 6 for details.)
2. Press DEL on the remote control.
3. Rotate the Volume Control on the main unit
or press or on the remote control to
select Yes to delete or No to cancel.
4. Press to confirm selection.
Deleting All Files
In navigation mode and mp3 stop mode, press
and hold DEL on the remote control to delete all
the files on the mp3 player or memory card.
EN
Advanced Playback Controls
15
In CD , USB and Portable Player mode, advanced
playback controls allow you to sample, repeat
and random playback files, set up a Program List.
In USB mode, allow you to rename tracks.
Sampling Tracks
Press INTRO on the remote control to play the
first 10 seconds of each track on the current disc,
all discs in the tray, or turn intro mode off.
INTRO is displayed when sampling is activated.
Repeat
Press REPEAT on the remote control to toggle
repeat options:
Repeat the current track (REPEAT 1),
Repeat current disc (REPEAT 1 DISC) ,
Repeat all discs (REPEAT ALL DISC), or
Normal playback (ALL DISCS).
Random Playback
Press on the remote control to turn on/off
random playback. is displayed when it is
activated.
All the tracks on one disc will be shuffled and
played once before shuffling and playing tracks
from the next disc.
Setting Up a Program List
1. In navigation mode, press CD 1/2/3/4/5 on the
remote control or DISC SKIP to select disc.
2. Use the navigation buttons to select the track /
file to add to Program List.
3. ???Pls advice which button to add
files???
Playing a Program List
While in PROGRAM stop mode , press .
If you are not currently in program mode, press
PROG to enter program mode. Program playback
begins automatically. PROGRAM is displayed.
Display Program List
1. While CD playback is stopped, press
PROG to enter PROGRAM mode. Program
playback begins automatically after entering
program mode.
To display program list, press .
2. Press or repeatedly to view
each track assignment in the program list.
Deleting from Program List
1. While in PROGRAM mode, press or to
select the program to delete.
2. Press MENU on the main unit.
3. Press or to select between No to
cancel and Yes to confirm.
4. Press to confirm selection.
Deleting the Entire Program List
1. While in PROGRAM mode, press or to
select the program to delete.
2. Press and hold MENU on the main unit.
3. Press or to select between No to
cancel and Yes to confirm.
4. Press to confirm selection.
Any rename function??
Pls advice the controls?
Tips:
Random playback can be activated
simultaneously with repeat 1 disc (randomly
play tracks from one disc repeatedly) or
repeat all discs (randomly play tracks from all
discs repeatedly).
Note:
You can create a program of up to
32 tracks.
EN
Wireless Musiclink
16
Folder 1
Folder 3
Song 1.1.1
Song 1.1.2
Song 1.1.3
Song 2.2
Song 2.3
Song 2.4
Song 1.2.1.1
Song 1.2.1.2
Song 1.2.1.3
Folder 1.2.1
Song 2.1.1
Song 2.1.2
Folder 2.1
Song 3.1
Song 3.2
Folder 1.1
Folder 1.2
Folder 2
A
B
C
D
E
F
G
3
4
5
6
7
8
9
10
11
12
13
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4
Song 4
Song 5
1
2
14
15
Note:
•Folder playback sequence is indicated by the letters A to G.
•Song playback sequence is indicated by the numbers (1 to 15) in front of the song name.
Tips on Playback Sequence of Disc
• Check that the mp3/WMA disc is created with a single folder structure. Refer to the
diagram below for playback sequence details on multi-level folder structure.
•For example, folders and songs from level 2 are played before moving on to play
folders and songs from level 3.
Advanced Navigation Controls
WAITING INFO FOR WIRELESS
MUSICLINK
EN
mp3 Player
17
Insert battery into the player
1. Slide the battery door by following the
direction of arrow.
2. Insert a “AAA”(UM4) battery with polarities
corresponding to the indications in the
compartment.
3. Replace the door to the battery compartment.
General Controls
- Press once to turns the unit on. In play
mode, press once to starts and pause music
playback.
- In stop mode, press once to turn off the
unit. Press once to stop music playback.
- Skips to the previous song or the
beginning of the current song. Press and hold to
scan backwards.
-Skips to the next song. Press and hold to
scan forward.
LOCK - Slide the switch to lock or unlock the keys
of the player
Headphones Jack - Insert headphones here.
- Use the USB port to connect to the Audio
System.
USB lock button - Press and hold and push the
USB connector out form the unit.
VOLUME + / - - Increases and decreases the
volume level.
M- Selects among playback options. (repeat one,
repeat all, random playback, repeat random
playback)
DSP - Selects among DSP modes (Flat, Bass, Pop,
Rock, Jazz)
Display Overview
1. Shows current volume level.
2. The relative play mode indicator lights
to show current selection.
- repeat track
- repeat all
- random playback
- repeat random playback
3. is displayed when the
key lock function is activated.
4. shows the battery level.
5. This section shows song information.
The information in this section presumes you’ve
successfully transferred files to the mp3 player,
and you’re ready to play some music.
Turn On/Off the mp3 player
Press to turn the unit on/off. Playback
starts automatically from the first track.
Play / Pause
• Press to start and pause playback of
selected track. Current track number, elapsed
playback time and track title show on display.
Stop Playback
• During playback, press to stop playback.
The total number of tracks is display.
• Press in stop mode to turn the unit off.
Note:
This unit may temporarily cease to
function if subjected to electrostatic
disturbance. To resume normal operation, it
may be necessary to cycle the power off
and back on or to remove and reinstall the
batteries.
4
2
6
15
3
mp3 Player
18
Skipping Tracks
• Press or to skip to the previous or
the next track.
Scan Tracks
•Press and hold or to scan
backwards and forwards during playback.
Adjusting the Volume
Press VOLUME +/- to adjust the volume.
Key Lock
•To avoid accidental key activation, slide the key
lock switch to the left. is displayed.
•Slide to the switch to the right to unlock.
DSP
Press DSP repeatedly to select among DSP modes:
FLAT > BASS > POP > ROCK > JAZZ
The current selection shows briefly on the display.
Play modes
During playback, press Mrepeatedly to select
among the following playback modes:
Normal playback
Repeat Track -
Repeat All -
Random Playback -
Repeat Random Playback -
Check for Updates
Visit www.thomson-lyra.com for the latest news
and firmware upgrades for our Lyra Digital Audio
Player. You must update your system after new
downloads have been made in order for the new
applications to be executed.
Frequently Asked Questions
You can get FAQ information at www.thomson-
lyra.com
Note:
If the elapsed time of the playing track is
less than 0:04, pressing once will
return to previous track.
If the elapsed time of the playing track is
more than 0:04, pressing once will
return to the beginning of the current
track.
Note:
When the unit is in off mode and the key
lock switch is at the LOCK position, pressing
the key will cause the display to show
the key lock icon for three seconds.
Troubleshooting Tips
EN
19
Solution
• Check power cord for a secure
connection.
• Unplug the unit for a moment,
and then plug into power
source again.
• Check the outlet by plugging in
another device.
• Increase the volume setting.
• Check connection to speakers.
• Check that you have selected
the appropriate function: CD,
Tuner.
• Make sure mute is off.
• Make sure headphones are not
plugged in.
• Check antenna connection.
• Move antenna.
• Turn off nearby electrical
appliances, such as hair dryer,
vacuum cleaner, microwave,
fluorescent lights.
• Check that CD is in the tray.
• Check that CD label is facing up.
• Check that PAUSE mode is not
on.
• Check that CD function is
selected.
• Use CD lens cleaner.
• Clean the disc.
• Try another CD.
Problem
System will
not turn
on
No sound
Poor radio
reception
CD does
not play
Problem
CD sound
skips
CD button
will not
respond, or
does not
change
discs when
you press
DISC SKIP
Remote
control
does not
work
Solution
• Clean the disc.
• Check disc for warping,
scratches, or other damage.
• Check if something is causing
the system to vibrate. If so,
move the system.
• Make sure the speakers are at
least 3 feet away or on a
different surface from the
main unit.
• Switch to another function
(Tuner) and then back
to CD.
• Check that the batteries are
properly installed.
• Replace weak batteries.
• Check the system is plugged
into power source.
• Point the remote directly at
the system’s front panel.
• Move closer to the system.
• Remove any obstacles
between the remote and the
system.
Main Unit
EN
20
Troubleshooting Tips
Solution
• Battery may be inserted
incorrectly.
• Battery may be empty.
• Repeat or random function may
be activated.
• There may be strong magnetic
fields (e.g. too close to TV) near
the unit.
• Low Battery level. Replace with
new one.
• LOCK function may be
activated.
• There may be no mp3 tracks in
the card or internal memory.
• Memory Card may be damaged.
•Make sure audio tracks are
encoded in the mp3 or
Windows Media formats at
supported bitrates.
Bitrates support by the player:
mp3 – 32 to 320 kbps
wma – 48 to 160 kbps
Check the website and/or
application help system of the
music download service provider
from where the content was
purchased from for license
acquisition details.
For more information on how
license acquisition works, go to
www.microsoft.com/windowsmedia/drm.
Problem
The player
does not
turn on
when
PLAY
button
pressed.
Skipping
tracks or
bad sound
quality?
Cannot
perform
playback?
Cannot
playback
tracks on
the player.
Problem
What does
the
PlaysForSur
e logo
mean?
USB display
does not
appear
when
connected
to
computer.
The player
does not
respond to
key
operations?
Solution
PlaysForSure is a new logo
program from Microsoft®.
Consumers can match the
PlaysForSure logo on a large
selection of devices and online
music stores. If you see the logo,
you’ll know your digital media
will play for sure.
For more information on the
Microsoft PlaysForSure program,
visit www.PlaysForSure.com.
For more information on RCA
PlaysForSure devices, visit
www.rca.com.
• Check connection between
your unit and the computer.
• To reset the unit, turn the
player off by removing the
battery. Reinsert the battery
properly and turn the player
on again to resume normal
operations.
Note:
This unit may temporarily cease
to function if subjected to electrostatic
disturbance. To resume normal operation,
it may be necessary to cycle the power
off and back on or to remove and
reinstall the batteries.
mp3 Player
Maintenance
EN
21
Disconnect the audio system from the power
source before performing any maintenance.
Cleaning
Clean the exterior of the system using a soft dust
cloth.
CD Player
CAUTION! This system operates with a laser. It
must be opened by only a qualified technician.
Handling CDs
• Do not touch the signal surfaces. Hold CDs by
the edges, or by one edge and the hole.
•Do not affix labels or adhesive tapes to the
label surfaces.
•Do not scratch or damage the label.
CDs rotate at high speeds inside the player.
•Do not use damaged (cracked or warped) CDs
Cleaning CDs
• Dirty CDs can cause poor sound quality. Always
keep CDs clean by wiping them gently with a
soft cloth from the inner edge toward the
outer perimeter.
• If a CD becomes dirty, wet a soft cloth in water,
wring it out well, wipe the dirt away gently,
and then remove any water drops with a dry
cloth.
• Do not use record cleaning sprays or antistatic
agents on CDs. Also, never clean CDs with
benzene, thinner, or other volatile solvents
which may cause damage to disc surface
CD Lens Care
When your CD lens gets dirty it can also cause the
system to output poor sound quality. To clean the
lens you will need to purchase a CD lens cleaner
can maintain the output sound quality of your
system. For instructions on cleaning the CD lens,
refer to the ones accompanying the lens cleaner.
Technical Specification
Power supply: 120V~60Hz
Dimensions ( H x W x D mm):
Unit size - 280 x 187 x 310
Speaker - 278 x 185 x 229
CD player: Response curve (+/- 2dB): 60Hz to 5kHz
Rating Plate: Look for it at the back of the set.
Maximum size of Mass Storage Class device
supported: 20 GB
22
EN
Limited Warranty (U.S.)
What your warranty covers:
• Defects in materials or workmanship.
For how long after your purchase:
• One year from date of purchase for labor and parts
• Warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm,
whichever comes first.
What we will do:
• Pay any Authorized RCA Audio Service Center the labor charges to repair your unit.
• Pay any Authorized RCA Audio Service Center for the new or, at our option, refurbished replacement parts
required to repair your unit.
How you get service:
• Take your unit to any Authorized RCA Audio Service Center. To identify your nearest Authorized RCA Audio
Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900.
• Show the Authorized Service Center Representative your evidence of purchase date or first rental.
• Pick up your unit when repairs are completed.
• Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the
warranty period must be presented to obtain warranty service. For rental firms, proof of first rental is also
required.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional
information should be obtained from your dealer.)
• Installation and related adjustments.
• Signal reception problems not caused by your unit.
• Damage from misuse or neglect.
• Cleaning of audio heads.
• Batteries.
• A unit that has been modified or incorporated into other products or is used for institutional or other commercial
purposes.
• A unit purchased or serviced outside the U.S.A.
• Acts of nature, such as but not limited to lightning damage.
Product Registration:
• Please complete and mail the Product Registration Card packed with your product. It will make it easier to contact
you should it ever be necessary. The return of the card is not required for warranty coverage.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION
GIVEN BY THOMSON INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. THOMSON INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY
ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How State Law relates to warranty:
• Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on
how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
• This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
If you purchased your unit outside the United States:
• This warranty does not apply. Contact your dealer for warranty information.
Service calls which do not involve defective materials or workmanship are not covered by this warranty.
Costs of such service calls are the sole responsibility of the purchaser.
Limited Warranty (Canada)
What your warranty covers:
• Defects in materials or workmanship.
For how long after your purchase:
• One year from date of purchase for labor and parts
• The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental
firm, whichever comes first.
What we will do:
• Pay any Authorized RCA Audio Service Center the labor charges to repair your unit.
• Pay any Authorized RCA Audio Service Center for the new or, at our option, refurbished replacement parts
required to repair your unit.
How you get service:
• Take your unit to any Authorized RCA Audio Service Center. To identify your nearest Authorized RCA Audio
Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900.
• Show the Authorized Service Center Representative your evidence of purchase date or first rental.
• Pick up your unit when repairs are completed.
• Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the
warranty period must be presented to obtain warranty service. For rental firms, proof of first rental is also
required.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional
information should be obtained from your dealer.)
• Installation and related adjustments.
• Signal reception problems not caused by your unit.
• Damage from misuse or neglect.
• Cleaning of audio heads.
• Batteries.
• A unit that has been modified or incorporated into other products or is used for institutional or other commercial
purposes.
• A unit purchased or serviced outside Canada.
• Acts of nature, such as but not limited to lightning damage.
Product Registration:
• Please complete and mail the Product Registration Card packed with your product. It will make it easier to contact
you should it ever be necessary. The return of the card is not required for warranty coverage.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. NO VERBAL OR
WRITTEN INFORMATION GIVEN BY THOMSON MULTIMEDIA LTD., ITS AGENTS OR EMPLOYEES SHALL
CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. THOMSON MULTIMEDIA LTD. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE PROVINCIAL LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH
ABOVE.
How Provincial Laws relates to warranty:
• This warranty gives you specific legal rights which are in addition to statutory warranties that may vary from
Province to Province.
If you purchased your unit outside Canada:
• This warranty does not apply. Contact your dealer for warranty information.
Service calls which do not involve defective materials or workmanship are not covered by this warranty.
Costs of such service calls are the sole responsibility of the purchaser.
EN
23
EXPORTER
Thomson Inc.
P. O. Box 1976
Indianapolis, IN 46206-1976
© 2006 Thomson Inc.
Trademark(s) ® Registered
Marca(s) ® Registrada(s)
Marque(s) ® Deposée(s)
www.rca.com
Printed In China / Impreso en China
56280040 (EN/F/E)
IMPORTADOR
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5

Navigation menu