Technicolor Connected Home USA TKA105 KeyPad User Manual
Technicolor Connected Home USA LLC KeyPad Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2953901 |
| Application ID | L9ds/xaY7LbOioVlUU0GJA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 43.5kB (543766 bits) |
| Date Submitted | 2016-04-08 00:00:00 |
| Date Available | 2016-10-05 00:00:00 |
| Creation Date | 2017-11-23 05:30:39 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-23 05:30:39 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CS5 (7.0) |
Security Keypad Quick Start Guide XFINITY HOME SECURITY • CONTROL • ENERGY Device Overview Battery Compartment Pairing/Tamper Button Low Battery Network Indicator Status LED/Proximity Sensor Getting Started Powering Up and Pairing 1. Remove the keypad and keypad battery door from box. (Important: The battery door must be mounted to wall before you snap keypad to battery door) 2. Set your touch screen to pairing mode and then pull the “Remove to Pair” tab to put device into pairing mode. 3. The keypad should start the joining process automatically. When the keypad is not joined to a network, the network indicator will be off. Once it is joined, the network icon will become solid anytime that the keypad is awake. Once the keypad has successfully joined the network, the pairing LED will turn solid, the network indicator will turn on, and the touch screen should indicate that it has paired with the keypad. Mounting Mount the keypad battery door to the wall in the desired location using the included mounting screws and anchors. Align the keypad to battery door and snap keypad onto battery door. (XFINITY® HOME technicians MUST use screws to install keypad). Status There is one system status LED located at the bottom of the Security Keypad. Different colors represent the following system status: Green: Ready/Not Armed Red: Armed : Not Ready Arming Arm Stay Button Press this button and enter your 4 digit security code to arm in stay mode. Arm Away Button Press this button and enter your 4 digit security code to arm in away mode. Arm Night Button Press this button and enter your 4 digit security code to arm in night mode. Replacing Batteries Controls 1. View battery level indicator to determine if batteries need replacement. Battery level indicator will display when batteries have less than 60 days of use remaining. 2. Pull keypad away from wall to remove from battery door. 3. Remove the old batteries then install AA Lithium batteries. a. Lithium batteries which came with device are not rechargeable. 4. Align the keypad to battery door and snap keypad onto battery door. Function Buttons Weekly Testing A Button: Reserved for future use B Button: Reserved for future use Volume Control There are 5 possible volume levels. To increase the volume, press and hold the #2 button. To decrease the volume, press and hold the #5 button. As the volume raises or lowers, there will be an audible beep signifying that the volume has changed. Continuing to hold the #2 or #5 button down will continue to raise or lower the volume. Door Chime Toggle Door Chime on/off by pressing and holding the #8 button. To ensure that your system continues to functioning as intended, you must test your system weekly. Please contact your security monitoring company for instructions on how to test your system. Proximity Detection Approvals installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet or a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The user is cautioned that changes and modifications made to the equipment without approval of manufacturer could void the users authority to operate this equipment. Change to Conforms to UL STDS 1023 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. These limits are designed to provide a reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiated radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular The keypad is able to detect the user’s presence within 6 inches. Once detected the keypad will awake and illuminate. (Lithium batteries do not charge)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2016:02:04 03:22:51Z Creator : Adobe InDesign CS5 (7.0) Modify Date : 2016:03:30 13:48:06+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2016:03:30 13:48:06+08:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Height : 256, 256 Page Image : (Binary data 9803 bytes, use -b option to extract), (Binary data 11756 bytes, use -b option to extract) Page Image Width : 256, 256 Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Thumbnail Width : 168 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 21026 bytes, use -b option to extract) N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 5.500000 Max Page Size H : 8.500000 Max Page Size Unit : Inches Font Name : HelveticaNeue-LightCond, HelveticaNeue-BoldCond, HelveticaNeue, HelveticaNeue-MediumCond Font Family : Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue Font Face : 47 Light Condensed, 77 Bold Condensed, Regular, 67 Medium Condensed Font Type : Type 1, Type 1, TrueType, Type 1 Font Version : 001.000, 001.000, 6.0d5e1, 001.000 Font Composite : False, False, False, False Font File Name : HelveNeuLigCon; Helvetica Neue Condensed 3, HelveNeuBolCon; Helvetica Neue Condensed 2, HelveticaNeue.dfont, HelveNeuMedCon; Helvetica Neue Condensed 3 Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Instance ID : uuid:d2744bf2-4f6e-4b7c-9168-5c303e456526 Document ID : xmp.did:293F2274072068118083BFCE00BF353C Rendition Class : proof:pdf Original Document ID : xmp.did:293F2274072068118083BFCE00BF353C History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History When : 2015:09:04 15:04:37-07:00, 2015:09:04 15:14:39-07:00, 2015:09:04 15:14:39-07:00, 2015:09:04 15:45:41-07:00, 2015:09:04 16:05:44-07:00, 2015:09:04 16:14:17-07:00, 2015:09:04 16:36:59-07:00, 2015:09:04 16:49:10-07:00, 2015:09:04 16:59:50-07:00, 2015:09:29 14:55:44-07:00, 2015:09:30 15:34:46-07:00, 2015:10:08 13:43:07-07:00, 2015:10:08 13:45:04-07:00, 2015:10:08 14:05:53-07:00, 2015:10:13 16:39:55-07:00 History Instance ID : xmp.iid:293F2274072068118083BFCE00BF353C, xmp.iid:2A3F2274072068118083BFCE00BF353C, xmp.iid:2B3F2274072068118083BFCE00BF353C, xmp.iid:2F3F2274072068118083BFCE00BF353C, xmp.iid:F298A67A122068118083BFCE00BF353C, xmp.iid:F698A67A122068118083BFCE00BF353C, xmp.iid:EEE40ED8162068118083BFCE00BF353C, xmp.iid:F3E40ED8162068118083BFCE00BF353C, xmp.iid:F8E40ED8162068118083BFCE00BF353C, xmp.iid:B5F1EBFAED2068118083FB342E2F8ED7, xmp.iid:43455E98BC2168118083FB342E2F8ED7, xmp.iid:BCA69D5FA92168118083DEEFD7AE45D4, xmp.iid:3F38ED1FAD2168118083DEEFD7AE45D4, xmp.iid:021F5A55AF2168118083DEEFD7AE45D4, xmp.iid:E57BF7E0F82068118C14E691D53B6F78 History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Format : application/pdf Doc Change Count : 500 Producer : Mac OS X 10.11.3 Quartz PDFContext Trapped : False Page Count : 2 For : WilliamsL, Title : Comcast Classic Keypad_r6.pdf Bounding Box : 0 0 396 612 Container Version : 11 Creator Version : 16 Image Height : 612 Image Width : 396 Image Size : 396x612 Megapixels : 0.242EXIF Metadata provided by EXIF.tools