Technicolor Delivery Technologies Belgium TD5136 ADSL MODEM User Manual

Technicolor Delivery Technologies Belgium ADSL MODEM

User Manual

 Wireless ADSL2+ Gateway        2 Table of Contents  Chapter 1: Product Overview ........................................................................................ 5 1.1 Features ................................................................................................................. 5 1.2 Package Contents.................................................................................................. 6 1.3 Hardware Overview .............................................................................................. 7 1.3.1 Front Panel ........................................................................................... 7 1.3.2 Rear Panel............................................................................................. 9 Chapter 2: Installation ................................................................................................. 10 2.1 Connect the Power.............................................................................................. 10 2.2 Connect Wired Devices ....................................................................................... 11 2.3 Connect Wireless Devices.................................................................................... 11 2.3.1 WLAN.................................................................................................. 11 2.3.2 Wi-Fi Protected Setup (WPS).............................................................. 11 2.4 Connect the Broadband (DSL) ............................................................................ 12 2.4.1 Use a Splitter ...................................................................................... 12 2.5 Check the Installation ......................................................................................... 12 Chapter 3: Configure the Computer ........................................................................... 13 3.1 Windows XP ........................................................................................................ 13 3.2 Windows Vista..................................................................................................... 14 3.3 Windows 7........................................................................................................... 14 Chapter 4: Access the Wireless Gateway..................................................................... 15 4.1 Initial Setup ......................................................................................................... 15 4.2 Login .................................................................................................................... 21 4.3 The Interface ....................................................................................................... 21 4.4 Using the Menu................................................................................................... 22 Chapter 5: Technicolor Gateway ................................................................................. 23 5.1 System Information............................................................................................. 23 5.2 System Configuration ......................................................................................... 24 5.2.1 DSL Service Configuration ................................................................. 24 5.2.2 Date and Time Configuration............................................................ 24 5.2.3 Web Browsing Interception............................................................... 25 5.3 Event Logs ........................................................................................................... 25  Chapter 6: Broadband Connection ............................................................................. 26
 Wireless ADSL2+ Gateway        3 6.1.1 DSL Connection .................................................................................. 26 Chapter 7:7.1 Rem7.2 Ga7.3 Par C7.4 Fire .7.5 Int  7.6 Dyn D7.8 Con6.1.2 Internet Services ................................................................................. 27  Toolbox ...................................................................................................... 28 ote Assistance............................................................................................... 28 7.1.1 Enable Remote Assistance ................................................................. 29 7.1.2 Disable Remote Assistance................................................................. 29 me & Application Sharing .............................................................................. 29 7.2.1 Assign a Game or Application ........................................................... 30 7.2.2 Modify Assigned Game or Application ............................................. 31 7.2.3 Create a New Game or Application .................................................. 32 7.2.4 Modify a Game or Application .......................................................... 33 ental  ontrol.................................................................................................. 34 wall . .............................................................................................................. 35 7.4.1 Change Firewall Security Level .......................................................... 35 7.4.2 Create a New Security Level .............................................................. 36 7.4.3 Set Filter Rules .................................................................................... 36 rusion Detection ............................................................................................. 37 amic  NS ....................................................................................................... 38 7.7 User Management............................................................................................... 39 7.7.1 Add New User..................................................................................... 39 7.7.2 Reset Password ................................................................................... 40 7.7.3 Manage Users ..................................................................................... 40 tent Sharing .................................................................................................. 40 7.8.1 Share Content Using Network File Server......................................... 41 7.8.2 Share Media Files Using Media Servers............................................. 42 7.8.3 Share Files Using FTP Server............................................................... 42 7.8.4 Unmount USB Storage Device ........................................................... 42 7.8.5 USB Printer Sharing............................................................................ 43 7.8.6 3G Dongle Sharing ............................................................................. 46
 Wireless ADSL2+ Gateway        4 Chapter 8: Home Network........................................................................................... 46 8.1 Devices ................................................................................................................. 47 8.1.1 View or Modify Device Information.................................................. 48 8.1.2 Assign Game or Application to Device.............................................. 48 8.1.3 Remove a Shared Game or Application ............................................ 48 8.1.4 Assign a Public IP Address to Device ................................................. 49 8.2 Interfaces ............................................................................................................. 49 8.2.1 Local Network Interface..................................................................... 50 8.2.2 Wireless Access Point.......................................................................... 52 Appendix ......................................................................................................................... 54 A. Wireless Considerations ...................................................................................... 54 B. Regulatory & Safety Information ....................................................................... 55 C. Specifications....................................................................................................... 58
Product Overview Chapter 1: Product Overview Thank you for choosing Technicolor® Wireless n ADSL2+ Gateway. This Wireless Gateway combines the functionality of an ADSL / ADSL2 / ADSL2+ modem and Internet gateway in one. You can access the Internet and share resources such as printers, scanners, and files, via a wireless connection or through one of the Ethernet ports. The various security features, such as WPS, WPA2, SPI, and NAT, protect your data and privacy online. The web-based utility allows you to configure your Wireless Gateway easily. 1.1 Features • Compliant with ADSL G.dmt (G.992.1), G.lite (G.992.2) standards • Compliant with ADSL2 G.dmt.bis (G.992.3) and ADSL2 + G.992.4 standards • Up to Up to 24Mbps downstream, 1.2Mbps upstream with ADSL2+ service • IEEE 802.11b/g/n infrastructure operating modes • Supports IPv4 and IPv6 protocols • Supports web-based configuration • Supports Command Line Interface (CLI) via Telnet • Supports NAT, SPIF • Supports VLAN and QoS • Supports firewall protection • Supports up to 8 permanent virtual circuits (PVC) • Supports Wi-Fi Multimedia (WMM) • Supports Wi-Fi Protected Setup (WPS) for easy connection • Supports wireless data encryption with 64/128-bit WEP standard • Supports enhance security for WPA-TKIP, WPA2-AES, WPA, and WPA2 • USB 2.0 for 3G backup  Wireless ADSL2+ Gateway        5
Product Overview 1.2 Package Contents Check if the package contains the following items. If any item is missing or appears damaged, contact your dealer.   Wireless n ADSL2+ Gateway   Power adapter  CD-ROM with User’s Guide   RJ-45 Ethernet cable  RJ-11 telephone cable    Wireless ADSL2+ Gateway        6
Product Overview 1.3 Hardware Overview 1.3.1 Front Panel  123456  No.  LED  Description 1  Power LED Lights up when the device is powered on. • Solid GREEN – Indicates normal operation. • Flashing GREEN – Firmware upgrade in progress.  • Solid RED – Indicates malfunction. • Off – The device is powered off. 2  Ethernet LED • Solid GREEN – A wired connection is established. • Flashing GREEN – Data transmission is in progress. • Off – No wired connection detected. 3  WLAN LED Lights up to indicate wireless connection. • Solid GREEN – Wireless connection is established. • Flashing GREEN – Data transmission is in progress. • Off – Wireless connection is disabled.  Wireless ADSL2+ Gateway        7
Product Overview No.  LED  Description 4  3G or WPS LED Lights up to indicate the Wi-Fi Protected Setup (WPS) connection status. • Solid GREEN – WPS-enabled device is connected. • Flashing GREEN – 3G card is connected and data transmission is in progress. • Flashing RED – WPS or 3G connection failed. • Off – WPS is disabled or no 3G card is connected. 5  Broadband (DSL) LED Lights up to indicate DSL connection status. • Flashing GREEN (slow) – DSL line detection in progress.  • Flashing GREEN (fast) – Attempts to synchronize with DSL line. • Solid GREEN – DSL connection is established. • Off – DSL connection is not present. 6  Internet LED Lights up to indicate Internet connection status. • Solid GREEN – Internet is connected but no activity. • Flashing GREEN – Data transmission is in progress. • Solid RED – Internet connection failed. • Off – No internet connection.  Wireless ADSL2+ Gateway        8
Product Overview 1.3.2 Rear Panel  2 3 1 47895 6 No.  Ports / Buttons  Description 1  DSL port  Connects to the DSL line using the RJ-11 cable. 2  Reset button  Press and hold this button for at least 10 seconds to restore your device to its original factory default setting. 3  LAN LED 1, 2  The LAN LED (1, 2) lights up when a device is connected to the Ethernet port (1, 2). 4  Ethernet port 1, 2, 3, 4 Connects a computer and other Ethernet network devices to the Wireless Gateway using RJ-45 cables.  5  LAN LED 3, 4  The LAN LED (3, 4) lights up when a device is connected to the Ethernet port (3, 4). 6  DC In jack  Connects to the power adapter. 7  Power button  Press to turn your device on or off. 8  WPS button  Press to enable the WLAN.  Press and hold for at least 8 seconds to enable WPS. 9  USB Port  Connects to USB flash drives or 3G dongle.  Wireless ADSL2+ Gateway        9
Installation Chapter 2: Installation Make sure that all devices are powered off before starting installation.   Installation Diagram 2.1 Connect the Power 1. Connect the power adapter to the DC In jack of your Wireless Gateway.  2. Plug the power adapter to a wall outlet or a power strip.  NOTE:  • Use only the supplied power adapter. Using other power adapters may cause damage to the device.  • Connect all devices to your Wireless Gateway before connecting the power adapter to a wall outlet.  Wireless ADSL2+ Gateway        10
Installation 2.2 Connect Wired Devices Connect devices such as computers, printers, and other Ethernet-enabled devices to the LAN port of the Wireless Gateway.  NOTE:  When setting up the Wireless Gateway for the first time, connect the host computer via Ethernet connection.   1. Connect one end of the RJ-45 cable to one of the Ethernet (1, 2, 3, 4) ports of your Wireless Gateway. 2. Connect the other end of the RJ-45 cable to the Ethernet port of the computer. 3. Repeat the above steps to connect other computers to the Wireless Gateway via Ethernet connection. 4. To connect more than four computers, use a hub or switch. Connect one end of an RJ-45 cable to the hub or switch and the other end to the computer. 2.3 Connect Wireless Devices Before connecting wireless devices to the Wireless Gateway, configure the wireless security settings of your Wireless Gateway (see “Error! Reference source not found.” on page Error! Bookmark not defined.). Take note of the SSID and the password you have set, you need the SSID and the password to connect devices to your Wireless Gateway. 2.3.1 WLAN From the wireless device end, search for the Wireless Gateway network name (SSID), and enter the passphrase to connect. NOTE: The SSID and passphrase are the ones you have set in the Wireless Security Settings (see “Error! Reference source not found.” on page Error! Bookmark not defined.).  2.3.2 Wi-Fi Protected Setup (WPS) Press and hold the WPS button of the Wireless Gateway for at least 8 seconds and press the WPS button on the WPS-enabled device to start pairing.  Wireless ADSL2+ Gateway        11
Installation 2.4 Connect the Broadband (DSL) 1. Connect one end of the RJ-11 cable to the DSL port of your Wireless Gateway. 2. Connect the other end of the RJ-11 cable to a wall jack with DSL service. 2.4.1 Use a Splitter You need a splitter when connecting the Wireless Gateway to the wall jack that also connects to a telephone.  1. Plug the splitter to the wall jack with DSL service. 2. Connect one end of the RJ-11 cable to the DSL port of your Wireless Gateway. 3. Connect the other end of the RJ-11 cable to the MODEM port of the splitter. 4. Connect the telephone to the LINE port of the splitter using another RJ-11 cable. 2.5 Check the Installation To ensure that all devices are properly connected, check the LED indicators on the front of your Wireless Gateway. For basic installation, the following LEDs must be lit: √ Power LED √ Ethernet LED √ DSL LED The lighted LED indicators vary depending on the type of connection that you make. See “Front Panel” on page 7 for more information about the LED indicators.   Wireless ADSL2+ Gateway        12
Configure the Computer  Chapter 3:  Configure the Computer This chapter will guide you on how to configure your computer according to the operating system you are using. Windows® XP, see below. Windows® Vista, see page 16. Windows® 7, see page 16. 3.1 Windows XP If you are using Windows® XP, follow the instructions below to configure your computer. 1. Click Start > Control Panel > Network Connections.  2. Right-click Local Area Connection, then click Properties. 3. On the network components list, make sure that Internet Protocol (TCP/IP) is checked. If not, check it to enable the Properties button. 4. Select Internet Protocol (TCP/IP), and then click Properties. 5. On the General tab, select Obtain an IP Address automatically and Obtain DNS server address automatically. 6. Click OK.                             General Page  Wireless ADSL2+ Gateway        13
Configure the Computer   3.2 Windows Vista If you are using Windows® Vista, follow the instructions below to configure your computer. 1. Click Start > Control Panel > Network and Internet Connections > Network Connections. 2. Right-click Local Area Connection, then click Properties. 3. On the General tab, make sure that Internet Protocol (TCP/IP) is checked. If not, check it to enable the Properties button. 4. Select Internet Protocol (TCP/IP), and then click Properties. 5. Select Obtain an IP Address automatically and Obtain DNS server address automatically. 6. Click OK.                              General Page 3.3 Windows 7 If you are using Windows® 7, follow the instructions below to configure your computer. 1. Click Start > Control Panel > Network & Sharing Center.  2. Click Local Area Connection. 3. Click Properties. 4. On the network components list, make sure that Internet Protocol (TCP/IP) is checked. If not, check it to enable the Properties button. 5. Select Internet Protocol (TCP/IP), and then click Properties. 6. On the General tab, select Obtain an IP Address automatically and Obtain DNS server address automatically. 7. Click OK.                              General Page Wireless ADSL2+ Gateway        14
Access the Wireless Gateway  Chapter 4:  Access the Wireless Gateway Use the Web Configurations utility to configure your Wireless Gateway. 4.1 Initial Setup 1. Launch the web browser.  When your Wireless Gateway is successfully connected to the computer, the web browser is automatically directed to the default IP address of your Wireless Gateway. The Not Connected screen appears.  2. On the address bar, type http://192.168.1.254 then press Enter. The Login screen appears.  3. Type the Username and Password, default values are “tech”.  Wireless ADSL2+ Gateway        15
Access the Wireless Gateway  NOTE: • If the Web Configurations utility has been left idle for some minutes, the system may prompt you to login again; enter the User name and Password. The default user name and password is “tech”. It is advised to change the password, see “Error! Reference source not found.” on page Error! Bookmark not defined..   4. The Welcome screen appears. Click on Set up my Technicolor Gateway. It is recommended to follow the wizard to set up the network and configure the Wireless Gateway.  5. The Technicolor Wizard screen appears. Click Next to continue.   Wireless ADSL2+ Gateway        16
Access the Wireless Gateway  NOTE: • The required information on the succeeding screens must be obtained from your Internet Service Provider (ISP).  6. Select the DSL account service: Bridge or Routed PP, and then click Next.  7. If you select Routed PPP, skip to step 8. If you select, Bridge, do the following: a. Select the VPI/VCI, and then click Next.   Wireless ADSL2+ Gateway        17
Access the Wireless Gateway  b. If your network is using a DHCP server, keep the DHCP Server box checked, if not, remove it.   c. Click Next to continue. Then, skip to step 9. 8. If you select Routed PPP, do the following: a. Select the VPI/VCI and Connection Type, and then click Next.   Wireless ADSL2+ Gateway        18
Access the Wireless Gateway  b. The Internet Account Settings screen appears. Obtain the necessary information from your ISP.  c. Type your Internet account user name in User Name. d. Type your account password in Password and Confirm Password.  e. Click Next to continue. 9. The Access Control screen appears. Create your access control account that you will use to login to the web configuration utility. To create the access control account, do the following: a. Type the administrator account name in User Name. b. Type the login password in Password and Confirm Password.  10. Click Next to continue.  Wireless ADSL2+ Gateway        19
Access the Wireless Gateway  11. Review your Wireless Gateway settings, and then click Start to apply the settings.  12. The configuration may take a while to finish. When complete, click Finish.    13. Close the web browser.  Wireless ADSL2+ Gateway        20
Access the Wireless Gateway  4.2 Login For more advanced configuration, access the Technicolor web configuration utility. 1. Launch the web browser. 2. On the address bar, type http://192.168.1.254, and then press Enter. 3. Login with the user name and password you set in the initial setup. 4. Click OK.  4.3 The Interface Once logged in, the Home screen appears. The Home screen provides quick access to the most common functions of your Wireless Gateway. Click an option to access the function.   Wireless ADSL2+ Gateway        21
Access the Wireless Gateway   In some screens, shortcut items are available on the bottom of the screen. Click a shortcut to access the page. See example below.  4.4 Using the Menu For more advanced users, use the main menu, located on the left panel of the screen, to configure your Wireless Gateway. Click a menu item, then a submenu to display the page. The following menu items are available: • Home — Displays the Home screen. • Technicolor Gateway — Allows you to configure your Wireless Gateway, such as system date and time, and to view event logs. • Broadband Connection — Allows you to view the DSL connection status of your Wireless Gateway and configure a dial-up connection and establish or terminate the Internet connection. • Toolbox — Allows you to configure more advanced functions, such as remote assistance, firewall, filter, parental control services, and others. • Home Network — Allows you to view the devices connected to the network of your Wireless Gateway.  Wireless ADSL2+ Gateway        22
Technicolor Gateway  Chapter 5:  Technicolor Gateway The Technicolor Gateway menu allows you to view the system information and configure the Wireless Gateway. This menu is divided into three sections: Information, Configuration, and Event Logs.  5.1 System Information The System Information page displays the product name, device serial number, and software release information. To view the System Information page, do one of the following: • On the main menu, click Technicolor Gateway > Information. • From the Home screen, click Information.   Wireless ADSL2+ Gateway        23
Technicolor Gateway  5.2 System Configuration The System Configuration page allows you to configure the Internet service and the system date and time, and enable web browsing interception. To view the System Configuration page, click Technicolor Gateway > Configuration. To modify the system configuration, click Configure.  5.2.1 DSL Service Configuration To modify the DSL service configuration, click Configuration Wizard and then follow the instructions on the screen. See “4.1 Initial Setup on page 15”. 5.2.2 Date and Time Configuration To modify the time configuration, do the one of following: Manual Configuration To manually set the date and time, enter the date and time values in the corresponding fields. Select a Timezone or enable Summer Time for applicable areas. Auto Configuration To synchronize the date and time with a time server, do the following: 1. Check the Auto-configuration box. 2. Enter the values of the applicable items in your location: • Timezone — Enter the time zone in your location. • Summer Time — Check if summer time is applicable in your location.  Wireless ADSL2+ Gateway        24
Technicolor Gateway   3. Enter the time server to sync the Wireless Gateway with. You can type up to five timer servers. 4. Click Apply to save changes.  5.2.3 Web Browsing Interception 1. On the Web Browsing Interception box, select one of the following: • Enabled (default) —  To enable web browsing interception. • Disabled — To disable web browsing interception. When disabled, address based filtering is also disabled. 2. Click Apply to save changes. 5.3 Event Logs The Event Logs page allows you to view and clear system logs. To access the Event Logs page, click Technicolor Gateway > Event Logs.  You can filter the list by selecting a category from the drop-down lists. The log is automatically refreshed every 10 seconds.  To clear the log, click Clear the event log on the bottom of the page.   Wireless ADSL2+ Gateway        25
Broadband Connection  Chapter 6:  Broadband Connection The Broadband Connection menu allows you to view and modify the Internet service configuration of your Wireless Gateway. This menu is divided into two sections: DSL Connection and Internet Services. To view the Broadband Connection page, click Broadband Connection.   6.1.1 DSL Connection  To view the DSL connection status, do one of the following: • On the Broadband Connection page, click View more under DSL Connection. • On the main menu, click Broadband Connection > DSL Connection.  NOTE: DSL connection cannot be modified from this point. To modify the DSL connection, see “5.2.1 DSL Service Configuration on page 24”.   Wireless ADSL2+ Gateway        26
Broadband Connection   6.1.2 Internet Services Use the Internet Services page to configure the settings and connect to the Internet. To view the Internet page, do one of the following: • From the Home screen, click Internet • On the Broadband Connection page, click View more under Internet • On the main menu, click Broadband Connection > Internet Services > View More  • To connect to the Internet, click Connect. • To modify the account username and password, re-type the information on the corresponding boxes, and then click Connect. • To view more connection details, click Details on the upper corner of the page. Wireless ADSL2+ Gateway        27
Toolbox  Chapter 7: Toolbox The Toolbox menu allows you to protect your network, share games and applications with other people on the Internet, and manage your local network. This menu is divided into eight sections: Remote Assistance, Game & Application Sharing, Parental Control, Firewall, Intrusion Detection, Dynamic DNS, User Management, and Content Sharing. To view the Toolbox page, click Toolbox on the main menu.  7.1 Remote Assistance NOTE: To enable remote assistance, you must be connected to the Internet.   The Remote Assistance page allows you to make your Wireless Gateway remotely accessible.  Wireless ADSL2+ Gateway        28
Toolbox  7.1.1 Enable Remote Assistance 1. Select the remote assistance Mode: • Permanent Mode — Once remote assistance is enabled, the remote session only ends when users disable this feature or when the Wireless Gateway is restarted. • Temporary Mode — The remote session automatically ends after 20 minutes of inactivity. 2. Enter the URL address to use to remotely access your Wireless Gateway. 3. Take note of the automatically generated User Name and Password that will be used to access your Wireless Gateway remotely. If desired, modify the password. 4. Check Enable Remote Assistance to enable this function. 5. Click Apply to save changes.  NOTE: • Only one remote session is allowed at a time. • The Wireless Gateway also supports dynamic DNS host names for remote access. See “Dynamic DNS” section.   7.1.2 Disable Remote Assistance Click Disable Remote Assistance to disable this function. 7.2 Game & Application Sharing The Game & Application Sharing page allows you to create new games and applications and assign games or applications to the network devices. To view the Game & Application Sharing page, do one of the following: • From the Home screen, click Game & Application Sharing under Toolbox. • On the main menu, click Toolbox > Game & Application Sharing.  Wireless ADSL2+ Gateway        29
Toolbox   7.2.1 Assign a Game or Application Your Wireless Gateway comes with predefined games and applications. Each game or application can be assigned to a network device. 1. To assign a game or application, do one of the following: • Click Configure on the upper-right corner of the screen. • Click the Assign a game or application to a local network device shortcut at the bottom of the screen.   Wireless ADSL2+ Gateway        30
Toolbox  2. To enable Universal Plug and Play (UPnP) function, check the Use UPnP box, then click Apply. 3. On the Assigned Games & Applications table, select a game or application on the Game or Application field. 4. On the Device field, select the network device to assign the game or application to. 5. To log access, check the Log box. 6. Click Add to add the assigned entry to the table. 7.2.2 Modify Assigned Game or Application 1. On the main menu, click Toolbox > Game & Application Sharing. 2. From the Game & Application page, click Customize on the upper-right corner of the screen.  3. On the Assigned Games & Applications table, click the Edit button of the game or application you want to modify. 4. Modify the necessary info. 5. Click Apply to save changes.  Wireless ADSL2+ Gateway        31
Toolbox  7.2.3 Create a New Game or Application If the game or application is not included in the predefined list, you need to create the game or application. 1. On the main menu, click Toolbox > Game & Application Sharing. 2. From the Game & Application page, click the Create a new game or application shortcut at the bottom of the screen.  3. On Name, type the name of the game or application.  4. Select how you want to define the new game or application: • Clone Exiting Game or Application — Select an existing game or application to clone its protocol and TCP/UDP port range settings. • Manual Entry of Port Maps — To manually select the protocol and enter the port range of the new game or application. 5. Click Next to continue. 6. If Clone Exiting Game or Application is selected on step 4, skip to step 8. 7. If Manual Entry of Port Maps is selected on step 4, configure the parameters of the Game or Application Definition table. A preset incoming port range is set by the Wireless Gateway. You may add, edit, or delete this range. To add a TCP/UDP port range, do the following:  Wireless ADSL2+ Gateway        32
Toolbox   a. Select the protocol. b. Enter the incoming port range and the outgoing trigger port. c. Click Add to save the settings. 8. Creating of game or application is complete. 7.2.4 Modify a Game or Application 1. On the main menu, click Toolbox > Game & Application Sharing. 2. From the Game & Application page, click the Modify a game or application shortcut at the bottom of the screen.  3. The list of games and applications appear. Click the Edit button of the game or application you want to modify.  4. Modify the necessary information. 5. Click Apply to save changes. To delete a game or application, click the Delete button of the game or application you want to delete.  Wireless ADSL2+ Gateway        33
Toolbox  7.3 Parental Control The Parental Control page allows you to filter web sites that a network device may access or be denied access. To view the Parental Control page, do one of the following: • From the Home screen, click Parental Control under Toolbox. • On the main menu, click Toolbox > Parental Control.  To configure parental control, click Configure on the upper-right corner of the screen.  • Use Address Based Filter — Check to filter web sites by address. • Actionfor Unknown Sites — Select whether to Block or Allow unknown sites. Click Apply to save changes.  Wireless ADSL2+ Gateway        34
Toolbox  • Web Site — Enter the URL of the web site to block or allow. • Action — Select one of the following options: • Block: To block the web site.  • Allow: To allow access to the web site. • Redirect: To redirect to another web site if the web site defined on the Web Site field is being accessed. • Redirect — If Redirect is selected in Action, enter the URL address to where you want to redirect the site. Click Add to save the changes to the table. 7.4 Firewall The Firewall page allows you to set the firewall security of your Wireless Gateway. To view the Firewall page, do one of the following: • From the Home screen, click Firewall under Toolbox. • On the main menu, click Toolbox > Firewall.  7.4.1 Change Firewall Security Level 1. On the Firewall page, click Configure on the upper-right corner of the screen. 2. Select the desired security level: • Block All — Block all traffic from and to the Internet. • Standard — Block all incoming traffic but allow outgoing traffic. • Disabled — Disable firewall security, all traffic is allowed. 3. Click Apply to save changes.  Wireless ADSL2+ Gateway        35
Toolbox  7.4.2 Create a New Security Level 1. On the Firewall page, click Configure on the upper-right corner of the screen. 2. Click the Create a new Security Level shortcut at the bottom of the screen. The New Firewall Level screen appears.  3. Enter the name for the new firewall security level. 4. Select a security level. 5. Click Apply to save changes. 7.4.3 Set Filter Rules After you create a new security level, you can set firewall rules.  1. On the Firewall page, click Configure on the upper-right corner of the screen. 2. Click Edit. The Firewall Settings appears. 3. On the Firewall Settings table, click Add.   Wireless ADSL2+ Gateway        36
Toolbox  4. Enter the necessary parameters: • Name — Enter desired firewall rule name • Enabled — Check this box to enable this firewall rule. • Source Interface — Select the interface to apply the firewall rule. • Source Address — Select the firewall source address. • User-Defined — If the address is not listed in the Source Address box, enter a user-defined address here. • Destination Interface — Select the destination interface. • Destination address — Select the destination address. • User-Defined — If the address is not listed in the Destination Address box, enter a user-defined address here. • Service — Select a service. • Action — Select the action to take: Deny or Accept. 5. Click Apply to save changes. The new firewall rule appears on the Firewall Settings table.  To edit a firewall rule, click Edit. To delete a firewall rule, click Delete. 7.5 Intrusion Detection Your Wireless Gateway protects your network against malicious intrusions. The Intrusion Detection page shows you the intrusions that you are protected against. The Protected Intrusions table shows the number of times the Wireless Gateway actively protected your network against each intrusions. To view the Intrusion Detection page, on the main menu, click Toolbox > Intrusion Detection.  Wireless ADSL2+ Gateway        37
Toolbox  7.6 Dynamic DNS The Dynamic DNS (DDNS) service allows you to assign a fixed DNS host name to an Internet connection even if it is using a dynamic IP address. As soon as your Wireless Gateway internal connection gets a new IP address, the dynamic DNS service updates the host name entry to the new IP address. The dynamic DNS service relies on servers that link the public IP address to a subscribed DNS host name. To view the Dynamic DNS page, on the main menu, click Toolbox > Dynamic DNS.  In order to use a dynamic DNS service, you must first register and enroll for DNS service with a Dynamic DNS service provider. The DDNS service provider will provide the necessary parameters to complete your Wireless Gateway Dynamic DNS setup. To configure the Dynamic DNS service of your Wireless Gateway, click Configure on the upper-right corner of the screen.  • Enabled — Check this box to enable the DDNS. • Interface — The DDNS interface is the Internet.  Wireless ADSL2+ Gateway        38
Toolbox  • Username — Enter the username provided by the DDNS service provider. • Password — Enter the password provided by the DDNS service provider. • Confirm Password — Re-type the password to confirm. • Service — Select the DDNS service provider where your account is registered. • Host — Type the host name. Click Apply to save changes. To use multiple hosts, click the Use multiple hosts shortcut at the bottom of the screen. Then click Add to add host name. 7.7 User Management The User Management page allows you to configure the users who can access the Wireless Gateway web configuration utility. To view the User Management page, click Toolbox > User Management.  7.7.1 Add New User 1. Click the Add new user shortcut at the bottom of the screen. 2. On Name, type desired user name. This will be the login name and the password of the new user. 3. On Administrator Privileges, select the user privilege. 4. Click Apply to save changes.  Wireless ADSL2+ Gateway        39
Toolbox  7.7.2 Reset Password To reset a password, on the User Management screen, click on the user account that you want to reset the password. Then click Reset Password. Aside from resetting the password, no other setting can be modified unless by users of higher privileges. 7.7.3 Manage Users To change the default user, click the Set the default user shortcut at the bottom of the screen.  To switch to another user, click the Switch to another user shortcut at the bottom of the screen. This brings you back to the login page, then login with the desired user account. 7.8 Content Sharing The Content Sharing page displays the configuration for sharing the content on a storage device connected to your Wireless Gateway. Before proceeding with content sharing, plug a USB memory stick or an external hard disk into the USB port of your Wireless Gateway. The USB memory stick or external hard disk will be referred to as USB storage device in the succeeding sections. To view the Content Sharing page, click Toolbox > Content Sharing.   Wireless ADSL2+ Gateway        40
Toolbox  7.8.1 Share Content Using Network File Server Your Wireless Gateway supports the Samba function through which you can directly access the data and media files on your storage device with other users on the network. When enabled, the USB storage disk appears on the network folders and is accessible to other devices on the network. To enable this feature, do the following: 1. On the main menu, click Toolbox > Content Sharing. 2. On the Content Sharing page, click Configure on the upper-right corner of the screen.  3. If desired, you may modify the Server Name and Server Description. You will use the server name to access the USB storage device.  4. On the Network File Server section, check the Server Enabled box. 5. Click Apply at the bottom of the screen to save changes. To Access Shared Files in Windows 1. Open Windows Explorer. 2. Browse for the server name, this is the USB storage device connected to your Wireless Gateway. The USB storage device is listed under Network folders.  Wireless ADSL2+ Gateway        41
Toolbox  7.8.2 Share Media Files Using Media Servers You can share media files with media devices like IP set-top boxes. 1. On the main menu, click Toolbox > Content Sharing. 2. On the Content Sharing page, click Configure on the upper-right corner of the screen. 3. On the UPnP AV Media Server section, check the Server Enabled box. 4. Click Apply at the bottom of the screen to save changes. 7.8.3 Share Files Using FTP Server You can share files by FTP. This is useful if you want to access your shared content from the Internet. 1. On the main menu, click Toolbox > Content Sharing. 2. On the Content Sharing page, click Configure on the upper-right corner of the screen. 3. On the FTP Server section, check the Server Enabled box. 4. Click Apply at the bottom of the screen to save changes. 7.8.4 Unmount USB Storage Device 1. On the main menu, click Toolbox > Content Sharing. 2. On the Content Sharing page, click Configure on the upper-right corner of the screen. 3. On the List of connected disks table, click Unmount. 4. Unplug the USB storage device from your Wireless Gateway.   Wireless ADSL2+ Gateway        42
Toolbox  7.8.5 USB Printer Sharing You can share a USB printer connected to your Wireless Gateway among network devices. Before using USB printer sharing, you must configure the printer server first. Do the following: NOTE: The following illustrations are from a Windows 7 computer. Similar procedures apply to other Windows OS versions.   1. Connect the USB printer to your Wireless Gateway USB port. 2. Have the printer software ready on your computer. 3. Open Devices and Printer, and click Add a printer. 4. Configure the new printer.  a. Select Add a local printer.  b. Select Create a new port, then select Standard TCP/IP Port. c. Click Next.  Wireless ADSL2+ Gateway        43
Toolbox  d. Type the host name or IP address of your Wireless Gateway. e. Check Query the printer and automatically select the driver to use. f. Select Custom, then click Settings.  g. Enter the port name or IP address of your Wireless Gateway. h. Select LPR. i. Select LPR Byte Counting Enabled. j. Click OK. k. Click Next to continue.  Wireless ADSL2+ Gateway        44
Toolbox  l. If the computer cannot detect the printer driver, select your printer from the list, then click Next. m.  Type desired Printer name, then click Next. n. Select Do not share this printer. o. Click Next to continue. p. Print a test page. q. Click Finish when done.  Wireless ADSL2+ Gateway        45
Toolbox   Wireless ADSL2+ Gateway        46 7.8.6 3G Dongle Sharing You can share a 3G network when a USB 3G dongle is connected to your Wireless Gateway. 1. Plug the USB 3G dongle to the USB port of your Wireless Gateway. 2. If the 3G dongle is supported, the Wireless Gateway automatically detects the 3G dongle in Home Network > Interfaces. 3. Follow the on-screen instructions on how to set up the access point and PIN of the 3G dongle.  Notes on RF Exposure: To comply with FCC/IC RF Exposure Limits set forth for an uncontrolled environment, the product must be installed and operated with a minimum separation distance (between nearby person(s) and radiating antenna) according to the following scenarios:  1. 20cm minimum when the product is operated alone without co-transmitting with a plug-in 3G USB dongle device. 2. 45cm minimum when the product is operated with a plug-in 3G USB device which has a maximum of 7W ERP output power. 3. For co-transmission scenario which is not covered above, please consult the RF technician or device supplier.
Home Network  Chapter 8: Home Network The Home Network menu displays the network configuration of your Wireless Gateway, along with interfaces and connected devices. This menu is divided into two sections: Devices and Interfaces. To view the Home Network page, click Home Network on the main menu.  8.1 Devices  This page displays the devices connected on your network via the Wireless Gateway Ethernet ports. You can do the following: • View the device information, IP address and connection services • Assign a public IP address to a device To access the Devices page, click Home Network > Devices.   Wireless ADSL2+ Gateway        47
Home Network  8.1.1 View or Modify Device Information 1. Click the device name. The device information is displayed on screen. 2. To modify the device information, click Configure on the upper right corner of the screen. 3. Type desired device name in New Name.  4. Select the device type in Type. 5. To assign a static IP address, check the Always use the same IP address box. 6. Click Apply to save changes. 8.1.2 Assign Game or Application to Device 1. Click the device name. The device information is displayed on screen. 2. Click Configure on the upper-right corner of the screen.  3. On the Connection Sharing section, select the game or application on the table. 4. Click Add. 8.1.3 Remove a Shared Game or Application 1. Click the device name. The device information is displayed on screen. 2. Click Configure on the upper-right corner of the screen. 3. On the Connection Sharing section, click the corresponding Unassign button of to remove the shared game or application.  Wireless ADSL2+ Gateway        48
Home Network  8.1.4 Assign a Public IP Address to Device The Assign Public IP page allows you to assign the public IP address of your Internet connection to a specific device on your local network. 1. Cick Home Network > Devices. 2. Click the Assign the public IP address of a connection to a device shortcut. The Assign Public IP screen appears.  3. Click Edit. 4. On Device, select the network device that you want to assign the public IP address. 5. Click Apply. Or, to remove the assigned IP address from a network device, click Unassign. 8.2 Interfaces The Interfaces page allows you to configure the network device TCP/IP settings such as IP address subnet mask, assign a DHCP server, and configure the wireless network security settings. To view the Interfaces page, click Home Network > Interfaces.   Wireless ADSL2+ Gateway        49
Home Network  8.2.1 Local Network Interface Click Home Network > Interfaces > LocalNetwork to open the Local Network page. This page displays the interface information including the TCP/IP configuration, IP Addresses, DHCP pool. To modify the settings, click Configure on the upper-right corner of the screen.  To use a DHCP Server, check the Use DHCP Server box, then click Apply. To Add an IP Address 1. On the IP Addresses table, type the IP address you want to add on the first box. 2. Type the subnet mask on the second box. 3. Click Add. To Modify the IP Address 1. On the IP Addresses table, click the corresponding Edit button of the IP address you want to modify. 2. Modify the IP address (first box) and the subnet mask (second box). 3. Click Apply to save changes.  Wireless ADSL2+ Gateway        50
Home Network  To Modify the DHCP Pool 1. Click the Edit button of the pool you want to modify. The LAN_Private screen appears.  • Interface — Displays the current network interface. • Start Address — Type the starting address of the DHCP pool. • End Address — Type the ending address of the DHCP pool. • Subnet Mask — Type the subnet mask. • Gateway — Type the gateway. • Primary DNS — Type the primary DNS. • Secondary DNS — Type the secondary DNS. • Always give same address to DHCP clients — Check to always give the same address for all DHCP clients. Otherwise, remove the check. When done, click Apply.  Wireless ADSL2+ Gateway        51
Home Network  8.2.2 Wireless Access Point Click Home Network > Interfaces > WLAN to open the Wireless Access Point page. This page displays the information of your wireless network. To view the advanced settings, click Details on the upper-right corner of the screen.  To Configure the Wireless Network Click Configure on the upper-right corner of the screen.  • Interface Enabled — Check to enable the wireless access point. • Physical Address — Displays the MAC address of the wireless device. • Network Name (SSID) — Enter desired wireless network name. • Actual Speed — Displays the network speed • Band — Displays the channel band. • Channel Selection — Select the automatic or manual channel selection. • Region — Displays your current region. • Channel — If Channel Selection is set to manual, select the channel from the list.  Wireless ADSL2+ Gateway        52
Home Network   • Broadcast Network Name — Check the box to enable wireless devices to see the SSID of your wireless network. • Encryption — Select an encryption method: • Disabled: No encryption. • Use WEP Encryption — To use WEP encryption. • Use WPA-PSK Encryption — To use a WPA-PSK encryption for more security. Use WEP Encryption  • WEP Key Length — Select the key length. • WEP Encryption Key — Type the desired encryption key. Users need to enter this passkey to connect to the wireless network.  Use WPA-PSK Encryption  • WPA-PSK Encryption Key — Type the desired passkey. Users need to enter this passkey to connect to the wireless network. • WPA-PSK Version — Select the WPA-PSK version to use. Wireless ADSL2+ Gateway        53
Appendix  Appendix A. Wireless Considerations Connection Performance A number of factors affect wireless connections. To ensure high-range and stable connectivity, do the following: 1. Keep the Wireless Gateway and other wireless devices away from obstructions, such as walls or buildings. Each obstruction can reduce the range of a wireless device.  2. Keep the Wireless Gateway and other wireless devices away from devices that produce radio frequency (RF) noise, such as microwave ovens or radios.  3. Keep the Wireless Gateway and other wireless devices away from any device operating on the 2.4GHz frequency, such as cordless phones or remote controls.  Security Checklist Wireless network signals can be intercepted easily. To prevent unauthorized users from connecting to your wireless network, follow the guidelines below. 1. Change the default wireless network name. Your device has a default Service Set Identifier (SSID) which is the wireless network name. Change the SSID with a unique name to identify your network. The SSID can be up to 32 characters in length. 2. Change the default password. Your device has a default password. You have to enter this password to change your network settings. Change the password to prevent unauthorized users from hacking into your network and changing the settings. 3. Enable MAC address filtering. Your device supports Media Access Control (MAC) address filtering. You can assign a MAC address on each computer that you want to connect to your wireless network. When MAC address filtering is enabled, only the computers with the specified MAC addresses are allowed access. 4. Enable encryption Your device supports Wired Equivalent Privacy (WEP), and Wi-Fi Protected Access (WAP/WPA2) encryption. To ensure a high level of security, enable the highest security encryption and use strong passphrases, avoid using words that can be found in the dictionary.  Wireless ADSL2+ Gateway        54
Appendix  B. Regulatory & Safety Information Wireless LAN, Health and Authorization Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices like for example mobile phones. Wireless LAN devices are safe for use frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments for example: Onboard airplanes, or In an explosive environment, or In case the interference risk to other devices or services is perceived or identified as harmful In case the policy regarding the use of Wireless LAN devices in specific organizations or environments (e.g. airports, hospitals, chemical/oil/gas industrial plants, private buildings etc.) is not clear, please ask for authorization to use these devices prior to operating the equipment. Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The Manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, of the substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. FCC (Federal Communications Commission) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.  Wireless ADSL2+ Gateway        55
Appendix  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.  This device may not cause interference, and 2.  This device must accept any interference, including interference that my cause undesired operation of this device. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.  RF Exposure Notice: To comply with FCC/IC RF Exposure Limits set forth for an uncontrolled environment, the product must be installed and operated with a minimum separation distance (between nearby person(s) and radiating antenna) according to the following scenarios:  1.  20cm minimum when the product is operated alone without co-transmitting with a plug-in 3G USB dongle device. 2.  45cm minimum when the product is operated with a plug-in 3G USB device which has a maximum of 7W ERP output power. 3.  For co-transmission scenario which is not covered above, please consult the RF technician or device supplier.          Wireless ADSL2+ Gateway        56
Appendix  CE statement Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: EN60950-1: 2006 Safety of Information Technology Equipment EN 50385: 2002 Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) - General public EN 300 328 V1.7.1 (2006-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489-1 V1.8.1 (2008-04) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.1.1 (2009-05)  Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.      Wireless ADSL2+ Gateway        57
Appendix   Wireless ADSL2+ Gateway        58 C. Specifications IC • Main chip: RTL8672-VK • AFE: RTL8271B-VR • Ethernet: RTL8305N-GR • WiFi: RTL8192CE-GR • DDR1: 32MB • Flash: 8 MB Serial User Interface • ADSL2+: POTS • 2x2 11n 2.4GHz single band • 4x 10/100 Base-T Ethernet LAN ports • 1 x USB Host Buttons • 1 x Power ON/OFF button • 1 x WPS button • 1 x Reset to default button LEDs Front panel • Power LED • Ethernet LED • Wi-Fi LED • 3G or WPS LED • ADSL LED • Internet LED Back panel • 4 x Ethernet LEDs IO Ports • 1 x RJ-11 DSL connector • 4 x RJ-45 Ethernet connector • 1 x DC In jack • 1 x USB port Antenna Standard: 2 internal printed antenna Reserved: 2 IPEX connectors for external dipole antenna connection DC inputs  12VDC 1A Temperature  Operating: 0°C ~ 40° C Storage: -10°c ~ 70°C Humidity  Operating: 10% ~ 95%, RH, no condensation PCB Dimensions  142 x 117 x 1.6 mm

Navigation menu