Technicolor Delivery Technologies Belgium TG790 Home Service Gateway User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1562072
Application ID	wgwX3AK3jFFHAK/d7yjNJg==
Document Description	User Manual (Statement)
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.75kB (284345 bits)
Date Submitted	2011-10-18 00:00:00
Date Available	2012-01-01 00:00:00
Creation Date	2011-09-13 10:07:29
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2011-10-17 17:12:06
Document Title	untitled
Document Creator	FrameMaker 10.0.1

Safety Instructions and Regulatory
Notices
FO
Read this document prior to installation!
*DSL36984940*
36984940
DMS-SAF-20110902-0002 v1.0. Printed in Vietnam. Copyright 2011 Technicolor. All rights reserved.
All tradenames referenced are service marks, trademarks, or registered trademarks of their respective companies.
Specifications subject to change without notice.
SAFETY INSTRUCTIONS AND REGULATORY NOTICES
BEFORE YOU START INSTALLATION OR USE OF THIS PRODUCT,
CAREFULLY READ THESE INSTRUCTIONS
When using this product, always follow the basic safety
! precautions to reduce the risk of fire, electric shock and injury to
persons, including the following:
 Always install the product as described in the documentation that
is included with your product.
 Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
 Do not use this product to report a gas leak in the vicinity of the
leak.
Open Source
FO
This product may contain various open source software, which may include
open source software released under the GNU General Public License
Version 2 (GPL) and GNU Lesser General Public License Version 2.1.
(LGPL). A list of the applicable open source software is available at http://
www.technicolor.com/en/hi/minisites/open-software/modem-gateways/fios.
The licensing terms for applicable open source software (including the texts
of GPL and LGPL), as well as, where applicable, the source code for the
open source software, are available for download at http://
www.technicolor.com/en/hi/minisites/open-software/modem-gateways/fios.
Those individuals without Internet access may request that a CD-ROM
containing the source code be sent to them by mail. To reimburse the
expenses incurred by creation, handling and postage, we will charge a $15
fee. To request a CD ROM of the source code, send an e-mail to
contactopensource@technicolor.com or mail the request, with payment, to
Technicolor- Open Software Source Code Request, Technicolor, 101 West
103rd Street, Indianapolis, IN 46290 USA. Open source software distributed
may change from time to time and will be reflected at the site referenced
above.
Wireless
In case this product is equipped with a wireless transceiver, it uses Direct
Sequence Spread Spectrum (DSSS) /Orthogonal Frequency Division
Modulation (OFDM) radio technology. As such it is designed to be interoperable with any other wireless DSSS/OFDM type product that:
 Complies with the IEEE802.11b/IEEE802.11g/IEEE802.11n Standard on
Wireless LANs, as defined and approved by the Institute of Electrical and
Electronics Engineers.
 Is Wi-Fi® CERTIFIED™ as defined by the Wi-Fi® Alliance.
Directive
FO
Unless express and prior approval by Technicolor in writing, you may not:
 Disassemble, de-compile, reverse engineer, trace or otherwise analyse
the equipment, its content, operation, or functionality,
or otherwise attempt to derive source code (or the underlying ideas,
algorithms, structure or organization) from the equipment,
or from any other information provided by Technicolor, except to the
extent that this restriction is expressly prohibited by local law;
 Copy, rent, loan, re-sell, sub-license, or otherwise transfer or distribute
the equipment to others;
 Modify, adapt or create a derivative work of the equipment;
 Remove from any copies of the equipment any product identification,
copyright or other notices;
 Disseminate performance information or analysis (including, without
limitation, benchmarks) from any source relating to the equipment.
Such acts not expressly approved by Technicolor will result in the loss of
product warranty and may invalidate the user's authority to operate this
equipment in accordance with FCC Rules.
Technicolor disclaims all responsibility in the event of use that does not
comply with the present instructions.
Safety Instructions
Climatic conditions
This product:
 Is intended for in-house stationary desktop use; the maximum ambient
temperature may not exceed 122°F (50°C).
Must not be mounted in a location exposed to direct or excessive solar
and/or heat radiation.
 Must not be exposed to heat trap conditions and must not be subjected to
water or condensation.
 Must be installed in a Pollution Degree 2 environment (Environment
where there is no pollution or only dry, nonconductive pollution).
Cleaning
Unplug this product from the wall socket and computer before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Water and moisture
Do not use this product near water, for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement or near a swimming pool.
Transition of the product from a cold environment to a hot one, may cause
condensation on some of its internal parts. Allow it to dry by itself before restarting the product.
Interface classifications
The external interfaces on the rear panel of the product are classified as
follows:
 Phone, VoIP, FXS: TNV circuit, not subjected to overvoltages (TNV-2)
 All interface ports (e.g. Coax, Ethernet, 10/100Base-T/MDI(-X), USB,
etc.), including the low voltage power input from the AC mains power
supply: SELV circuits.
WARNING
! It is not allowed to connect the Coax port to a cable distribution or
cable television network by any means, e.g. with a coaxial cable.
FO

Electrical powering
The powering of the product must adhere to the power specifications
indicated on the marking labels.
The power supply must be Class II and a Limited Power Source in
accordance with the requirements of IEC60950-1/ EN60950-1, Clause 2.5
and rated as indicated on the label on your product. It must be tested and
approved to national or local standards.
For US and Canada: This product is intended to be supplied by a Listed
Direct Plug-in, or Desktop Power Unit marked "Class 2" and rated as
indicated on the label on your product.
FO
The use of other types of supplies is prohibited. If you are not sure of the
type of power supply needed, consult the product's user documentation or
contact your local product dealer.
USB
The device is to be connected to an identified USB port complying with the
requirements of a Limited Power Source.
Accessibility
The Direct Plug-in power supply, or the plug on the power supply cord
serves as disconnect device. Be sure that the power socket outlet you plug
the power supply into is easily accessible and located as close to the
equipment as possible.
Overloading
Do not overload mains supply socket outlets and extension cords as this
increases the risk of fire or electric shock.
Servicing
To reduce the risk of electric shock, do not disassemble this product. None of
its internal parts are user-replaceable; therefore, there is no reason to
access the interior. Opening or removing covers may expose you to
dangerous voltages. Incorrect reassembly could cause electric shock if the
appliance is subsequently used.
If service or repair work is required, take it to a qualified service dealer.
Damage requiring service
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
 When the power supply or its plug are damaged.
 When the attached cords are damaged or frayed.
 If liquid has been spilled into the product.
 If the product has been exposed to rain or water.
 If the product does not operate normally.
 If the product has been dropped or damaged in any way.
 There are noticeable signs of overheating.
 If the product exhibits a distinct change in performance.
Immediately disconnect the product if you notice it giving off a smell of
burning or smoke. Under no circumstances must you open the equipment
yourself; you run the risk of electrocution.
Regulatory Information
FO
You must install and use this device in strict accordance with the
manufacturer's instructions as described in the user documentation that is
included with your product.
Before you start installation or use of this product, carefully read the contents
of this document for device specific constraints or rules that may apply in the
country where you want to use this product.
In some situations or environments, the use of wireless devices may be
restricted by the proprietor of the building or responsible representatives of
the organization.
If you are uncertain of the policy that applies on the use of wireless
equipment in a specific organization or environment (e.g. airports), you are
encouraged to ask for authorization to use this device prior to turning on the
equipment.
Technicolor is not responsible for any radio or television interference caused
by unauthorized modification of the device, or the substitution or attachment
of connecting cables and equipment other than specified by Technicolor.
The correction of interference caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.
Technicolor and its authorized resellers or distributors are not liable for any
damage or violation of government regulations that may arise from failing to
comply with these guidelines.
North-America - United States of America
Federal Communications Commission (FCC) Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
FO
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
Responsible Party: Technicolor, 101West 103rd Street, Indianapolis, IN
46290 USA, 888-898-4377.
RF-Exposure Statement
When the product is equipped with a wireless interface, then it becomes a
mobile or fixed mounted modular transmitter and must have a separation
distance of at least 20cm between the antenna and the body of the user or
nearby persons. In practice, this means that the user or nearby persons
must have a distance of at least 20cm from the product and must not lean on
the product in case it is wall-mounted.
With a separation distance of 20cm or more, the M(aximum) P(ermissible)
E(xposure) limits are well above the potential this module is capable to
produce.
The transmitter shall not be collocated with other transmitters or antennas.
Restricted Frequency Band
In case this product is equipped with an IEEE802.11b/IEEE802.11g/
IEEE802.11n wireless transceiver, it may only use channels 1 to 11 (2412 to
2462 MHz) on U.S.A. territory.
North-America - Canada
Notification of Canadian Radio Frequency Interference Statement
This Class B digital apparatus complies with Canadian ICES-003.
NOTICE: This product meets the applicable Industry Canada technical
specifications.
Canada - Industry Canada (IC)
In case this product is equipped with an IEEE802.11b/IEEE802.11g/
IEEE802.11n wireless transceiver, complying with RSS 210 and/or RSS 213
of Industry Canada, operation is subject to the following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including
interference that may cause undesired operation of the device.
IMPORTANT NOTE: Radiation Exposure Statement
! This equipment complies with IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your
body.
FO
Restricted Frequency Band
In case this product is equipped with an IEEE802.11b/IEEE802.11g/
IEEE802.11n wireless transceiver, it only uses channels 1 to 11 (2412 to
2462 MHz) on Canada territory.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Mode                       : UseNone
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Creator Tool                    : FrameMaker 10.0.1
Modify Date                     : 2011:10:17 17:12:06+08:00
Create Date                     : 2011:09:13 10:07:29Z
Metadata Date                   : 2011:10:17 17:12:06+08:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:72a3284f-6e43-4f2e-98a5-ebe0e9f4b598
Instance ID                     : uuid:3dae3687-c620-486e-b5f3-297ecc6602df
Has XFA                         : No
Page Count                      : 8
Language                        : en
Creator                         : FrameMaker 10.0.1

EXIF Metadata provided by EXIF.tools