Technics Sc Eh560 Users Manual

Technics-Sc-Eh760-Sc-Eh560-Owners-Manual technics-sc-eh760-sc-eh560-owners-manual

EH760 36065f9f-7a3f-4e74-a6c9-5bc499eb53b7

36065f9f-7a3f-4e74-a.. 36065f9f-7a3f-4e74-a6c9-5bc499eb53b7

SC-EH560 to the manual 36065f9f-7a3f-4e74-a6c9-5bc499eb53b7

2015-02-05

: Technics Technics-Sc-Eh560-Users-Manual-359448 technics-sc-eh560-users-manual-359448 technics pdf

Open the PDF directly: View PDF .
Page Count: 44

System Component

Operating Instructions

Model No. SC-EH760

SC-EH560

Note

The “EB” indication shown on the outside packing

case indicates United Kingdom.

Before connecting, operating or adjusting this prod-

uct, please read these instructions completely.

Please keep this manual for future reference.

RQT5355-B

EB EP GN

The illustrations show SC-EH760 for areas except Australia and N.Z.

RQT5355

CD changer or CD player

(Back of product)

System

Sound processor

Tuner amplifier

CD changer

CD player

Cassette deck

Front

Speaker Center

Surround

SC-EH760

SH-EH760

SA-EH760

SL-EH760

—

RS-EH760

SB-EH760

SB-PC75

SB-PS75

SC-EH560

SH-EH560

SA-EH560

—

SL-EH560

RS-EH760

SB-EH560

—

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instruc-

tions carefully.

These operating instructions are applicable to the following systems.

These operating instructions, however, fundamentally explain the

operation of system SC-EH760.

[SC-EH760]: indicates a function which can be enjoyed with

SC-EH760 only.

[SC-EH560]: indicates a function which can be enjoyed with

SC-EH560 only.

DANGER

INVISIBLE LASER RADIATION WHEN OPEN.

AVOID DIRECT EXPOSURE TO BEAM.

ADVARSEL

USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE

ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING.

VARO!

AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA

NÄKYMÄTÖNTÄ LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.

VARNING

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH

SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN.

ADVARSEL

USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS

BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN.

VORSICHT

UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET.

NICHT DEM STRAHL AUSSETZEN.

(Indersiden at apparatet)

(Tuotteen sisällä)

(Apparatens insida)

(Produktets innside)

(Im Inneren des Gerätes)

(Inside of product)

CLASS 1

LASER PRODUCT

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORM-

ANCE OF PROCEDURES OTHER THAN THOSE SPECI-

FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO QUALIFIED

PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOK-

CASE, BUILT IN CABINET OR IN ANOTHER CONFINED

SPACE. ENSURE THE UNIT IS WELL VENTILATED. EN-

SURE THAT CURTAINS AND ANY OTHER MATERIALS

DO NOT OBSTRUCT THE VENTILATION TO PREVENT

RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO

OVERHEATING.

Supplied accessories

Please check and identify the supplied

accessories.

¸AC mains lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.

For United Kingdom For Australia and N.Z.

(VJA0733) (RJA0035-X)

For others

(RJA0019-X)

¸Remote control transmitter . . . . . . . . . . . . . . . . . . . 1 pc.

[SC-EH760] [SC-EH560]

(RAK-EHA28WH) (RAK-EHA29WH)

¸Remote control batteries . . . . . . . . . . . . . . . . . . . 2 pcs.

¸FM indoor antenna . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.

For Australia and N.Z. For others (RSA0007)

(RSA0006)

¸AM loop antenna set (RSA0022-J) . . . . . . . . . . . . . 1 set

¸Speaker cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 pcs.

[SC-EH760] [SC-EH560]

(REE0984) (REE0985) (REE0393) (REE0499)

(Blue0Black) (Gray0Black) (Red0Black) (Red0Black)

¸Antenna plug adaptor (SJP9009) . . . . . . . . . . . . . . 1 pc.

(Only for United Kingdom)

Use numbers indicated in parentheses when asking for replacement

parts.

Before use

RQT5355

Safety precautions

Placement

Set the system up on an even surface away from direct sunlight,

high temperatures, high humidity, and excessive vibration. These

conditions can damage the cabinet and other components, thereby

shortening the unit’s service life.

Place it at least 15 cm away from wall surfaces to avoid distortion

and unwanted acoustical effects.

Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload the unit

and cause a fire.

Do not use a DC power source. Check the source carefully when

setting the unit up on a ship or other place where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not dam-

aged. Poor connection and lead damage can cause fire or electric

shock. Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC

mains lead can cause electric shock.

Do not handle the plug with wet hands. This can cause electric

shock.

Foreign matter

Do not let metal objects fall inside the unit. This can cause electric

shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or

malfunction. If this occurs, immediately disconnect the unit from the

power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain flam-

mable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is interrupted,

indicators fail to light, smoke appears, or any other problem that is not

covered in these instructions occurs, disconnect the AC mains lead

and contact your dealer or an authorized service center. Electric

shock or damage to the unit can occur if the unit is repaired, disas-

sembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power

source if it is not to be used for a long time.

Table of contents

Before use

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . 13

Caution for AC Mains Lead. . . . . . . . . . . . . . . . . 14

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Basic connections. . . . . . . . . . . . . . . . . . . . . . . . 16

Optional antenna connections . . . . . . . . . . . . . . 17

Front panel controls . . . . . . . . . . . . . . . . . . . . . . 18

The remote control . . . . . . . . . . . . . . . . . . . . . . . 10

Setting the time . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Turning DEMO off . . . . . . . . . . . . . . . . . . . . . . . . 11

Saving power in the standby mode . . . . . . . . . . 11

Basic operations

CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

The radio: manual tuning . . . . . . . . . . . . . . . . . . 16

The radio: preset tuning . . . . . . . . . . . . . . . . . . 17

Cassette tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Changing sound field and quality

Changing sound field and quality . . . . . . . . . . . 20

Using the manual equalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using the acoustic image equalizer (3D AI EQ) . . . . . . . . . . . . 21

Boosting the super woofer . . . . . . . . . . . . . . . . . 21

Enjoying surround sound. . . . . . . . . . . . . . . . . . 22

6CH DISCRETE INPUT [SC-EH760] . . . . . . . . . . . . . . . . . . . . . 24

DOLBY PRO LOGIC [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . . 25

VIRTUAL DOLBY SURROUND [SC-EH560] . . . . . . . . . . . . . . . 26

SUPER SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . 26

SIMULATED STEREO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Surround effects . . . . . . . . . . . . . . . . . . . . . . . . . 27

CENTER FOCUS [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . . . . 27

VIRTUAL REAR SURROUND [SC-EH760] . . . . . . . . . . . . . . . . 27

MULTI REAR SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . . . 27

3D ENHANCED SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . 27

CENTER EFFECT [SC-EH560] . . . . . . . . . . . . . . . . . . . . . . . . . . 28

SURROUND EFFECT [SC-EH560] . . . . . . . . . . . . . . . . . . . . . . . 28

SEAT POSITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Recording operations

Before recording (Deck 2 only) . . . . . . . . . . . . . 30

Recording CDs . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Recording the radio . . . . . . . . . . . . . . . . . . . . . . 33

Tape-to-tape recording . . . . . . . . . . . . . . . . . . . . 33

Timer operations

Using the timers . . . . . . . . . . . . . . . . . . . . . . . . . 34

Convenient functions

Changing the sound range display . . . . . . . . . . 37

Muting the volume. . . . . . . . . . . . . . . . . . . . . . . . 37

Using headphones (not included) . . . . . . . . . . . 37

External unit connections . . . . . . . . . . . . . . . . . 38

Using other equipment . . . . . . . . . . . . . . . . . . . . 39

Enjoy karaoke with CDs and cassettes

(for Australia and N.Z. only) . . . . . . . . . . . . . . 40

Reference

Technical specifications . . . . . . . . . . . . . . . . . . . 41

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . 42

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Before use

RQT5355

(For United Kingdom)

(“EB” area code model only)

For your safety, please read the following text

carefully.

This appliance is supplied with a moulded three pin

mains plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure

that the replacement fuse has a rating of 5-ampere

and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark m or the BSI mark o on

the body of the fuse.

If the plug contains a removable fuse cover you must

ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used

until a replacement cover is obtained.

A replacement fuse cover can be purchased from

your local dealer.

WARNING: DO NOT CONNECT EITHER WIRE TO

THE EARTH TERMINAL WHICH IS MARKED WITH

THE LETTER E, BY THE EARTH SYMBOL nn

n OR

COLOURED GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of

AC mains plug (figures A and B). Confirm the AC

mains plug fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse

cover.

Fuse cover

Figure A

Figure B

Fuse

(5 ampere)

Fuse

(5 ampere)

Figure A

Figure B

Caution for AC Mains Lead

If a new plug is to be fitted please observe the wiring

code as stated below.

If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accor-

dance with the following code:

Blue: Neutral, Brown: Live.

As these colours may not correspond with the col-

oured markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured Blue must be connected to

the terminal which is marked with the letter N or col-

oured Black or Blue.

The wire which is coloured Brown must be connected

to the terminal which is marked with the letter L or col-

oured Brown or Red.

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUIT-

ABLE FOR THE SOCKET OUTLET IN YOUR

HOME THEN THE FUSE SHOULD BE RE-

MOVED AND THE PLUG CUT OFF AND DIS-

POSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRI-

CAL SHOCK IF THE CUT OFF PLUG IS IN-

SERTED INTO ANY 13-AMPERE SOCKET.

Before use

RQT5355

30–35 mm

100 mm

7–9 mm

Ø7.5~9.5

120°

30° 30°

Caution

³Use the speakers only with the recommended system.

Failure to do so may lead to damage to the amplifier

and/or the speakers, and may result in the risk of fire.

Consult a qualified service person if damage has

occurred or if you experience a sudden change in

performance.

³Do not attempt to attach these speakers to walls using

methods other than those described in this manual.

CD changer

(SL-EH760) or

CD player

(SL-EH560)

Sound processor

(SH-EH760/560)

Cassette deck

(RS-EH760)

Tuner amplifier

(SA-EH760/560)

Sound processor

(SH-EH760/560)

Tuner amplifier

(SA-EH760/560)

CD changer (SL-EH760) or

CD player (SL-EH560)

Cassette deck

(RS-EH760)

aCenter speaker

(SB-PC75)

Front speaker (R)

(SB-EH760/560)

Installation

Locating the components

[A] Side-by-side set-up

[B] Stacking

Note

³Do not put the CD changer or CD player on the tuner amplifier. Heat

from the tuner amplifier can damage your CDs.

³Left and right front speakers are exactly the same.

Use only the supplied speakers.

The combination of the system and the speakers provides the best

sound. Using other speakers can damage the unit and sound quality

will be negatively affected.

Front speaker (L)

(SB-EH760/560)

Front speaker (left)

(SB-EH760)

Front speaker (right)

(SB-EH760)

bSurround

speaker (left)

(SB-PS75)

cSurround

speaker (right)

(SB-PS75)

Listening

position

Front view Front view

¤The front, center, and surround speakers should be

placed at approximately the same distance from the lis-

tening position. The angles in the diagram are approxi-

mate.

CPlacement of center/surround

speakers

Center speaker

Place the center speaker (a) directly above the television.

Surround speakers

Place the surround speakers (b, c) either side of the listening posi-

tion, or slightly to the rear, about 1 meter higher than ear level.

Place the speakers with the Technics logo facing toward the listening

position.

However the position should be adjusted to your personal prefer-

ence, because the effect varies to some degree depending upon the

type of music and the music source.

Note

If you are unable to position the surround speakers as recommend-

ed, you can put them near the front speakers and still achieve a sur-

round-like effect (➡ page 27, “VIRTUAL REAR SURROUND”).

[D] Attaching to a wall

Set speaker onto screws and slide through bracket to lock into posi-

tion.

Note

The wall or pillar on which the speaker systems are to be attached

should be capable of supporting 5 kg.

If irregular coloring occurs on your television

Turn the television off for about 30 minutes.

The television’s demagnetizing function should correct the problem.

If it persists, move the speakers further away from the television.

SC-EH760

Before use

RQT5355

A1 B2

LOW MID

HIGH LOW MID

HIGH

75∞

FM ANT

75∞

GND

(Right)

Adhesive tape

(Left)

To household

mains socket

(Left)

(Right)

To unplug cables

Hold the connector

from both ends

and pull it out.

Connector

(For Australia and N.Z.)

Tuner amplifier side

Gray (i)

Speaker side

White

line

To connect cables

(For others)

Red

(i)

Blue

(i)

(For Australia and N.Z.)

(For others)

Basic connections

Approx. 6 mm

Connector

Appliance

inlet

Black (j)

The illustrations show SC-EH760 for areas except Australia and N.Z.

Gray (i)

Blue(i)

Red

(i)

Before use

RQT5355

EXT

LOOP

AM ANT

5–12m

EXT

LOOP

75∞

AM ANT

FM ANT

75∞

FM ANT

GND

EXT

LOOP

AM ANT

15mm

30mm

1Flat cables.

Keep the cables as flat as possible against the back of the

unit.

Note

Connect the black connectors to the black terminals and the

blue connector to the blue terminal. Incorrect connection of the

flat cables can damage the unit.

2FM antenna.

Fix the other end of the antenna where reception is best.

3AM loop antenna.

1Attach the antenna holder to the rear panel of the CD

changer or CD player.

Then clamp the antenna into the antenna holder.

2Connect the antenna terminal to the rear panel of the tuner

amplifier.

Keep loose antenna cord away from other wires and cords.

4Front (L/R) speaker cables.

Connect the cables to the terminals of the same color.

Note

³To prevent damage to circuitry, never short-circuit positive

(i) and negative (j) speaker wires.

³Be sure to connect only positive (red, blue or gray) wires to

positive (i) terminals and negative (black) wires to negative

(j) terminals.

5[SC-EH760]

Surround and center speaker cables.

6AC mains lead.

Insertion of connector

Even when the connector is perfectly inserted, depending on

the type of inlet used, the front part of the connector may jut

out as shown in the drawing.

However there is no problem using the unit.

Note

The included AC mains lead is for use with this unit only. Do not use it

with other equipment.

For your reference:

Information you enter into the unit’s memory, except for time, remains

intact for up to two weeks after the mains lead is disconnected.

(For United Kingdom only)

BE SURE TO READ THE CAUTION FOR THE

AC MAINS LEAD ON PAGE 4 BEFORE PRO-

CEEDING TO STEP 6.

Optional antenna

connections

Use outdoor antennas if radio reception is poor.

FM outdoor antenna

Note

³Disconnect the FM indoor antenna.

³The antenna should be installed by a competent technician.

FM outdoor antenna

1Remove a piece of the outer vinyl

insulator.

2Twist the shield braid to expose the

core wire.

Core wire

Shield braid

Use the antenna

plug adaptor

(included).

75  coaxial cable

(not included)

(United Kingdom only)

(For Australia and N.Z.)

(For others)

Tuner amplifier

AM outdoor antenna

Run a piece of vinyl wire horizontally across a window or other con-

venient location.

Note

³Leave the loop antenna connected.

³Disconnect the antenna when the unit is not in use. Do not use the

antenna during an electrical storm.

AM outdoor antenna

Tuner

amplifier

Before connection

³Do not connect the AC mains lead until all other connections

are complete.

³To prepare the AM loop antenna and speaker cables (and

FM antenna for Australia and N.Z.), twist the vinyl tip and pull

off ([A]).

Before use

RQT5355

Front panel controls

ATuner amplifier

1Standby/on switch (ê/I) . . . . . . . . . . . . . . . . . . . . . . 11, 34, 35

Press to switch the unit from on to standby mode or vice versa. In

standby mode, the unit is still consuming a small amount of

power.

2Standby indicator (ê)

When the unit is connected to the AC mains supply, this indicator

lights up in standby mode and goes out when the unit is turned on.

3Play timer/record timer button and indicator

(FPLAY/FREC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35

4ECO mode button (MODE) . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5Clock/timer, demo button

(CLOCK/TIMER, –DEMO) . . . . . . . . . . . . . . . . . . . . . 11, 34–36

6FM mode button (FM AUTO/MONO) . . . . . . . . . . . . . . . . . . 16

7[SC-EH760]

6ch discrete input button (6CH DISCRETE INPUT) . . . . . . 24

8Source input button (INPUT SELECTOR) . . . . . . . . . . . . . . 39

9Tuner/band button (TUNER/BAND) . . . . . . . . . . . . . . . . . . . 16

:[SC-EH760]

Digital super woofer button and indicator

(DIGITAL S.WOOFER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

[SC-EH560]

Super woofer button and indicator (S.WOOFER) . . . . . . . 21

;Volume control (VOLUME) . . . . . . . . . . . . . . . . . . . . 12, 16, 18

<Headphone jack (PHONES) . . . . . . . . . . . . . . . . . . . . . . . . . 37

=Tuning mode button (TUNING MODE) . . . . . . . . . . . . . . . . 16

>Set button (SET) . . . . . . . . . . . . . . . . . . . . . . . . . 11, 17, 34, 35

?Tuning buttons (X, W TUNING) . . . . . . . . . . . . . 11, 16, 34, 35

@[SC-EH760\for\areas\except\Australia\and\N.Z.]

[SC-EH560\for\areas\except\United\Kingdom]

RDS display mode buttons

(RDS, PS–DISP MODE–PTY) . . . . . . . . . . . . . . . . . . . . . . . . 16

[SC-EH760\for\Australia\and\N.Z.]

KARAOKE and echo buttons (KARAOKE, ECHO) . . . . . . 40

A[SC-EH760\for\Australia\and\N.Z.]

Microphone jacks (MIC, 1, 2) . . . . . . . . . . . . . . . . . . . . . . . . 40

B[SC-EH760\for\Australia\and\N.Z.]

Microphone volume control (MIC VOL) . . . . . . . . . . . . . . . 40

BCD changer/CD player

C[SC-EH760]

Disc select buttons and indicators (DISC, 1–5) . . . . . . . . . 12

Green: Indicates that the tray is ready to play its CD or to be

opened.

DRandom play button (RANDOM) . . . . . . . . . . . . . . . . . . . . . 15

ERepeat button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

FCD edit button (EDIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

G[SC-EH760]

Disc direct open buttons

(DIRECT OPEN, DISC 1– DISC 5) . . . . . . . . . . . . . . . . . . . . . 12

HDisc tray open/close button (< OPEN/CLOSE) . . . . . . . . . 12

ISkip/search buttons (4, 5) . . . . . . . . . . . . . . 13

JDisc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

KStop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

LPause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

MPlay button and indicator (!) . . . . . . . . . . . . . . . . . . . . 12, 32

The color of the indicator depends on the operation taking place.

If stopped: orange

If playing: green

If paused: flashes

1 2

MIC

MIN MAX

VOL

H/I

MODE

TUNING

PHONES

TUNING MODE SET KARAOKE ECHO

INPUT SELECTOR TUNER/BAND

DIGITAL

S.WOOFER

VOLUME

DOWN

FM AUTO/

MONO 6CH

DISCRETE INPUT

PLAY

/œ

REC

CLOCK/TIMER

DEMO

5 67 8 9 ;:3 41 2

< = > B? @ A

H/I

MODE

TUNING

PHONES

TUNING MODE SET

INPUT SELECTOR TUNER/BAND

VOLUME

DOWN

FM AUTO/

MONO

PLAY

/œ

REC

CLOCK/TIMER

DEMO

5 6 8 9 ;:3 41 2

< = > ?



DISC

RANDOM

DISC

DIRECT OPEN

DISC

OPEN

»

M N

REPEAT

EDIT

RANDOM REPEAT EDIT

OPEN

»

M N

SC-EH760

SC-EH560

C GD FE H

J K ML

D FE H

J K ML

S.WOOFER

DISP MODE

RDS

PTYPS

Before use

RQT5355

Front panel controls

ACassette deck

NDeck 1 cassette holder open button (< OPEN) . . . . . . . . . 18

ODeck 1 cassette holder

PFast forward/rewind buttons (6, 5) . . . . . . . . . . . . . . . 19

QDeck 2 cassette holder

RDeck 2 cassette holder open button (< OPEN) . . . . . . 18, 31

SCounter reset, display buttons

(COUNTER, RESET, DISPLAY) . . . . . . . . . . . . . . . . . . . . . . 30

TDeck 1/deck 2 select button (DECK 1/2) . . . . . . . . . . . . 18, 19

UPlayback buttons and indicators (", !) . . . . . . . . 18, 32, 33

The color of the indicators depends on the operation taking place.

If stopped, fast forwarding or rewinding: orange

If playing or recording: green

While carrying out TPS or recording is on standby: flashes

VStop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 32

WDolby noise reduction button (DOLBY NR) . . . . . . . . . 18, 31

XReverse mode button (REV MODE) . . . . . . . . . . . . . . . . 18, 31

YTape edit button (TAPE EDIT) . . . . . . . . . . . . . . . . . . . . . . . 33

ZRecord pause button (´ REC PAUSE) . . . . . . . . . . . . . 32, 33

BSound processor

[[SC-EH760]

Display mode button (DISPLAY MODE) . . . . . . . . . . . . . . . 37

[SC-EH560]

Display mode, virtual speaker demo button

(DISPLAY MODE, –ëV DEMO) . . . . . . . . . . . . . . . . . . . 26, 37

\Display

]3D AI EQ, M.EQ BAND button

(3D AI EQ/M.EQ BAND) . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21

^[SC-EH760]

Jog control and joystick (MULTI JOG) . . . . . . . . . . . . . 20, 21

_[SC-EH760]

DOLBY PRO LOGIC button and indicator

(ë PRO LOGIC, OFF/ON) . . . . . . . . . . . . . . . . . . . . . . . . . . 25

`[SC-EH760]

Super surround button and indicator

(SUPER SURROUND) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

a[SC-EH760]

Center focus button and indicator (CENTER FOCUS) . . . 27

b[SC-EH760]

Virtual rear surround button and indicator

(VIRTUAL REAR SURROUND) . . . . . . . . . . . . . . . . . . . . . . . 27

c[SC-EH760]

Multi rear surround button and indicator

(MULTI REAR SURROUND) . . . . . . . . . . . . . . . . . . . . . . . . . 27

d[SC-EH760]

3D ENHANCED SURROUND button and indicator

(3D ENHANCED SURROUND) . . . . . . . . . . . . . . . . . . . . . . . 27

eSeat position button and indicator

(SEAT POSITION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

f[SC-EH560]

Multi control buttons

(2, 1, 3, 4 MULTI CONTROL) . . . . . . . . . . . . . . . . . . 20, 21

g[SC-EH560]

EQ button (EQ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21

h[SC-EH560]

Virtual Dolby Surround button and indicator

(VIRTUAL DOLBY SURROUND) . . . . . . . . . . . . . . . . . . . . . . 26

i[SC-EH560]

Simulated stereo button and indicator

(SIMULATED STEREO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

j[SC-EH560]

Center effect button and indicator

(CENTER EFFECT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

k[SC-EH560]

Surround effect button and indicator

(SURROUND EFFECT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

DSP CONTROL

CENTER

EFFECT SEAT

POSITION

SURROUND

EFFECT

DISPLAY MODE

UV DEMO

MULTI

CONTROL

VIRTUAL

DOLBY SURROUND SIMULATED

STEREO

3D AI EQ/

M.EQ BAND

DSP CONTROL

DISPLAY MODE

PRO LOGIC

OFF/ON

MULTI JOG

SEAT

POSITION

CENTER

FOCUS 3D ENHANCED

SURROUND

MULTI REAR

SURROUND

VIRTUAL REAR

SURROUND

SUPER

SURROUND

3D AI EQ/

M.EQ BAND

COUNTER

RESET

DISPLAY

DECK 1/2

OPEN

DOLBY NR

REV MODE TAPE EDIT

REC

PAUSE

T WX ZYU VS

SC-EH760

SC-EH560

[ ^]\

_ ` a b d ec

[ f g]\

h i j ek

PO Q RN

Before use

RQT5355

R6/LR6

AA,UM-3

]

{

}

;

30° 30°

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g ¤ ¤»

MUTING

M N

∂ VOLUME µ

TEST

3D AI EQ/M.EQ BAND

The remote control

AControls

Buttons 1, 9–;, ], _, ` and g–i function in the same way

as the controls on the main unit.

lSleep timer button (SLEEP) . . . . . . . . . . . . . . . . . . . . . . . . . 36

mNumbered buttons (1–9, 0, M) . . . . . . . . . . . . 14, 15, 17

nCursor buttons (2, 1, 3, 4) . . . . . . . . . . . . . . . . . . . . 20, 21

o[SC-EH760]

Channel select button (CH SELECT) . . . . . . . . . . . . . . . 24, 26

p[SC-EH760]

Test button (TEST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

q[SC-EH760]

Input select button (VCR/AUX/6CH INPUT) . . . . . . . . . 24, 39

[SC-EH560]

VCR button (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

rTAPE select, deck 1/deck 2 select button

(TAPE/DECK 1/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19

sCD pause/Tape reverse playback button

(2/;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 18, 32, 33

tMuting button (MUTING) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

uProgram button (PROGRAM) . . . . . . . . . . . . . . . . . . . . . . . . 14

vCancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

w[SC-EH760]

Disc button (DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15

xEQ button (EQ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21

yAV effect button (AV EFFECT) . . . . . . . . . . . . . . . . . . . .27–29

zCD button (CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15

{CD play/tape forward playback button

(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14, 18, 32, 33

|CD/tape stop button (º) . . . . . . . . . . . . . . . . . . . . . . 13, 18, 32

}CD skip/search, tape fast forward/rewind buttons

(4, 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 19

BBatteries

³Insert so the poles (i and j) match those in the remote control.

³Do not use rechargeable type batteries.

Do not;

³mix old and new batteries.

³use different types at the same time.

³heat or expose to flame.

³take apart or short circuit.

³attempt to recharge alkaline or manganese batteries.

³use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can

damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer.

Wash thoroughly with water if electrolyte comes in contact with any

part of your body.

Remove if the remote control is not going to be used for a long period

of time. Store in a cool, dark place.

Replace if the unit does not respond to the remote control even when

held close to the front panel.

If the battery lid comes loose, slide it back into place horizontally.

CUse

Aim at the sensor, avoiding obstacles, at a maximum range of 7 me-

ters directly in front of the unit.

³Keep the transmission window and the unit’s sensor free from dust.

³Operation can be affected by strong light sources, such as direct

sunlight, and the glass doors on cabinets.

Do not;

³put heavy objects on the remote control.

³take the remote control apart.

³spill liquids onto the remote control.

Tuner amplifier

Before use

RQT5355

ASetting the time

This is a 24-hour clock.

The example shows how to set the clock for 16:25 (4:25 p.m.).

1Press [ê/I] to turn the unit on.

21Press [CLOCK/TIMER, –DEMO] to

display “CLOCK”.

Each time you press the button:

CLOCK>FPLAY>FREC>Original display

^-------------------------------------------------------------------}

2Within 7 seconds

Press [SET].

31Press [TUNING (X or W)] to set the

time.

The time display can be changed in one minute units by

tapping the buttons, and quickly by holding down the but-

tons.

2Press [SET].

The time is set and the original display is restored.

Displaying the clock

Press [CLOCK/TIMER, –DEMO].

The clock is shown for about 5 seconds.

BTurning DEMO off

A demonstration of the display is shown if you have not set the clock.

Turn DEMO off to get the most from ECO mode.

While the unit is on:

Press and hold [CLOCK/TIMER, –DEMO]

until “NO DEMO” is displayed.

Each time you press and hold the button:

NO DEMO (off)bDEMO (on)

CSaving power in the standby

mode

Set the unit to reduce energy consumption in the standby mode

(11 W>0.5 W).

While the unit is on:

1Press [MODE].

The current mode is displayed.

2Within 5 seconds

Press [MODE] to display “ECO”.

Each time you press the button:

NORMAL (off)bECO (on)

ECO: The clock is not displayed in the standby mode. The “ê” and

“FPLAY/FREC” indicators still light.

Note

The mode can be switched to ECO when the unit is in standby but it

cannot be switched back to NORMAL.

1 2 32

MODE

CLOCK/TIMER

DEMO

SET

CLOCK/TIMER

DEMO

SET

MODE

TUNING

H/I

Basic operations

RQT5355



DISC 1–5

DISC 1 DISC 2

DIRECT OPEN

DISC 3 DISC 4 DISC 5

OPEN

VOLUME

DOWN

SC-EH760

SC-EH560

OPEN

DISC

H/I



1 2 3

CDs

Normal play

Preparation: Press [ê/I] to turn the unit on.

[SC-EH760]

1Press [DIRECT OPEN] ([DISC 1]–

[DISC 5]) to open a tray and set a CD.

2Press [< OPEN/CLOSE] to close the

tray.

Repeat steps 1 and 2 to load the other trays.

3Press [!] to start play.

Play starts from the first track on the disc in the play position

and finishes at the end of the last track on the final disc (see

below).

You can start play from another disc by pressing [DISC 1–5].

4Adjust the volume.

Note

You can not change CDs while a disc is playing.

What is meant by “final disc”?

For example, if play starts from disc 4, disc 3 will be the “final disc”.

Order of progression:

Disc 4>5>1>2>3

[SC-EH560]

1Press [< OPEN/CLOSE] to open the

tray and set a CD.

2Press [< OPEN/CLOSE] to close the

tray.

3Press [!] to start play.

4Adjust the volume.

Label must

face upward

Disc

number Total

number of

tracks

Total

playing

time

Track number

Elapsed

play time

Basic operations

RQT5355

[

][

]



»

M, N

8cm CD

12cm CD

CDs

To stop the disc

Press [º].

To pause play

Press [;] during play. The “!” indicator flashes.

Press [;] or [!] to resume play.

Skipping tracks

Press [4] (backward), or [5] (forward).

Searching through tracks

During play

Press and hold [4] (backward), or [5] (forward).

“NO DISC” is displayed

When the unit is in CD mode but a disc isn’t in the playing position

(SC-EH760) or in the player (SC-EH560).

Note

³Skipping is done in the selected order in program play (➡ page 14).

³You cannot skip to tracks already played in random play

(➡ page 15).

³You can search only within tracks in program and random play.

ACD selection

Choose discs with this mark (a).

Do not;

³use irregularly shaped discs (b).

³attach extra labels and stickers.

³use discs with labels and stickers that are coming off or with adhe-

sive exuding from under labels and stickers (c).

³attach scratch-proof covers or any other kind of accessory.

³write anything on the CD.

³clean CDs with liquids. (Wipe with a soft, dry cloth.)

³use CDs printed with label printers available on the market.

BTo prevent damage

Always observe the following points.

³Load only 1 CD per tray (d).

³Load CDs as shown in figure (e).

An adaptor is not needed with 8 cm CDs (singles).

³Set the system on a flat, level surface.

³Always unload all CDs before moving the system.

Do not;

³set it on top of magazines, inclined surfaces, etc.

³move the system while tray is opening/closing, or when loaded.

³put anything except CDs in trays.

³use cleaning CDs or CDs which are badly warped or cracked.

twice once

Play position

once twice

Track Track Track

Basic operations

RQT5355

DISC PRGM

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g¤ ¤»

MUTING

∂ VOLUME µ

TEST

3D AI EQ/M.EQ BAND

PROGRAM

123

456

7890

j/-/--

¤

123

DISC

PROGRAM CANCEL

»

PRGM

DISC

DISC PRGM

SC-EH760

M, N

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g¤ ¤»

MUTING

∂ VOLUME µ

TEST

3D AI EQ/M.EQ BAND

CDs

Program play

Select up to 24 tracks to play in the order you choose.

Remote control only

Preparation: Press [CD] to put the unit in CD mode.

1Press [PROGRAM].

2[SC-EH760]

Press [DISC].

3[SC-EH760]

Within 10 seconds or so

Press [1]–[5] to select the disc.

4Select the track with the numbered

buttons.

For tracks numbered 10 and over, press [L] then the two

digits.

Repeat steps 2 through 4 (SC-EH760) or step 4 (SC-EH560)

to program the tracks in the required order.

The total playing time of the programmed tracks is displayed.

5Press [1].

All the tracks are played in the selected order.

[A] To cancel

Press [PROGRAM].

“CLEAR” is displayed and all the tracks are canceled. If a track was

playing, play continues to the end of the disc.

“FULL” is displayed

If 24 tracks have been programmed.

“––:––” is displayed if;

³total playing time for the tracks is over 99 minutes and 59 seconds.

³a track numbered 25 or over was programmed.

³a disc not in playing position was programmed (SC-EH760).

Tracks can still be programmed and played.

[A] To check the contents of the program

1Press [CANCEL]. “CANCEL” will light.

2Press [4] or [5]. Each time you press the button,

the disc numbers (SC-EH760), track numbers and program posi-

tions are displayed.

3After the playing time appears on the display, press [CANCEL].

“CANCEL” goes out.

To add to the end of the program

Repeat steps 2 through 4 (SC-EH760) or step 4 (SC-EH560).

[A] To cancel tracks

To program the track you are listening to

Press [PROGRAM]. The program mode engages and the current

track is automatically recorded as program No. 1.

1. Press [CANCEL].

2. Select the track with [4] or

[5] then press [CANCEL].

3. Press [CANCEL] again.

Press [PROGRAM] or [º] while stopped.

A particular track

All tracks

Programmed

track no.

Programmed

order

Total playing time

Basic operations

RQT5355

RANDOM

INPUT SELECTOR

REPEAT

RANDOM

123

456

7890

j/-/--

123

DISC

SC-EH760

SC-EH560

RANDOM

SC-EH760 SC-EH560

REPEAT

DISC

RANDOM

DISC



RANDOM REPEAT

DISC

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g¤ ¤»

TEST

3D AI EQ/M.EQ BAND

CDs

Other modes of play

Preparation: Press [CD] on the remote control or [INPUT

SELECTOR] on the tuner amplifier to select “CD”.

ADirect access play

[SC-EH760]

Starts normal play from a selected track on a selected disc to the last

track of the final disc (➡ page 12).

[SC-EH560]

Starts normal play from a selected track to the last track.

Remote control only

1[SC-EH760]

Press [DISC].

2[SC-EH760]

Within 10 seconds or so

Press [1]–[5] to select the disc.

3Select the track with the numbered

buttons.

For tracks numbered 10 and over, press [L] then the two

digits.

BRandom play

[SC-EH760]

Plays the tracks of all discs once each in random order.

[SC-EH560]

Plays the tracks once each in random order.

Press [RANDOM].

To cancel

Press [RANDOM].

“RANDOM” goes out.

For your reference:

In the program play mode (➡ page 14), the programmed tracks are

played randomly.

CRepeat play

[SC-EH760]

Repeats all tracks on all discs or all programmed tracks.

[SC-EH560]

Repeats all tracks or programmed tracks.

Press [REPEAT] before or during play.

To cancel

Press [REPEAT].

“`” goes out.

To repeat only your favorite track(s)

1Program the track(s) you want (➡ page 14).

2Press [REPEAT] and make sure “`” is displayed.

3Press [!]. Play will start.

Basic operations

RQT5355

1 42 3

H/I FM AUTO/

MONO

DISP MODE

RDS

PTYPS

TUNING MODE

VOLUME

DOWN

FM AUTO/

MONO

DISP MODE

RDS

PS PTY

MHz

TUNED ST

MHz

TUNED MONO

MHz

RDS PS

TUNED RDS PTY ST

TUNER/BAND

TUNING

The radio: manual tuning

Radio stations can be tuned manually by selecting the station’s fre-

quency or they can be preset into channels to make it easy to tune

with the tuner amplifier or the remote control (➡ page 17).

Preparation: Press [ê/I] to turn the unit on.

1Press [TUNER/BAND] to select FM or

AM.

Each time you press the button: FMcAM

2Press [TUNING MODE] to select

“MANUAL”.

Each time you press the button: MANUALcPRESET

3Press [TUNING (X or W)] to tune in the

desired broadcast.

“TUNED” is displayed when a radio station is tuned.

“ST” is displayed when a stereo FM broadcast is being re-

ceived.

4Adjust the volume.

Auto tuning

Press and hold [TUNING (X or W)] for a moment until the frequency

starts changing rapidly. The unit begins auto tuning, stopping when it

finds a station.

³When there is excessive interference, auto tuning may not function.

³To cancel auto tuning, press [TUNING (X or W)] once again.

AIf noise is excessive in FM

Press [FM AUTO/MONO] to display “MONO.”

This mode improves sound quality if reception is weak for some rea-

son but broadcasts are heard in monaural.

Press [FM AUTO/MONO] again to cancel the mode. “MONO” goes

out.

MONO is also canceled if the frequency is changed.

Turn off “MONO” for normal listening. Stereo and monaural broad-

casts are automatically played as they are received.

Stations can be preset in monaural. Carry out presetting manually

(➡ page 17).

RDS broadcasting

[SC-EH760\for\areas\except\Australia\and\N.Z.]

B[SC-EH560\for\areas\except\United\Kingdom]

This unit can display the text data transmitted by the radio data sys-

tem (RDS) available in some areas.

If the station you are listening to is transmitting RDS signals, “RDS”

will light up on the display.

Displaying the name of a broadcasting station

Press [PS-DISP MODE] to display a station name.

Press [DISP MODE-PTY] to display a program type.

Each time you press the button:

Frequency displaycPS or PTY display

If the PS display isn’t shown

Press and hold [PS-DISP MODE] for about 4 seconds.

The mode switches every time the button is pressed and held:

MODE 1cMODE 2

Note

RDS displays may not be available if reception is poor.

¤“M.O.R M”l“Middle of the road music”.

PTY displays

NEWS VARIED FINANCE COUNTRY

AFFAIRS POP M CHILDREN NATIONAL

INFO ROCK M SOCIAL A OLDIES

SPORT M.O.R M¤RELIGION FOLK M

EDUCATE LIGHT M PHONE IN DOCUMENT

DRAMA CLASSICS TRAVEL TEST

CULTURE OTHER M LEISURE ALARM

SCIENCE WEATHER JAZZ

Basic operations

RQT5355

342

TUNING MODE

SET

123

456

7890

j/-/--

TUNER/

BAND

∂ VOLUME µ

MHz

TUNING

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g¤ ¤»

MUTING

∂ VOLUME µ

TEST

3D AI EQ/M.EQ BAND

The radio: preset tuning

Choose either automatic presetting, which presets all the stations the

tuner amplifier can receive, or manual presetting, which allows you to

select the stations to preset and the order they are to be preset in.

There are 39 channels available for presetting.

AAutomatic presetting

Do the following once each for FM and AM.

Preparation: Tune to the frequency presetting is to begin at

(➡ page 16).

Hold down [SET].

Release the button when “AUTO MEMORY” appears.

The tuner presets all the stations it can receive into the channels in

ascending order. FM stations are preset into channels 1 to 39, and

AM stations are preset into channels 21 to 39.

“SET OK” is shown when presetting is complete and the last station

to be preset is played.

“ERROR” is displayed if the tuner doesn’t receive any stations. Do

presetting manually if this happens (see below).

Note

AM stations replace any FM channels that were preset in channels

21 to 39.

BManual presetting

Preset the stations one at a time.

1Tune to the required station.

2Press [SET].

3Press [TUNING (X or W)] to select a

channel.

4Press [SET].

The station occupying a channel is erased if another station is preset

in that channel.

CSelecting channels

On the remote control

1Press [TUNER/BAND].

2Press the numbered buttons to select

the channel.

For channels 1 to 9 press the corresponding number.

For channels 10 or over press [L], then the two digits.

e.g. To select channel 21 [L]>[2]>[1]

3Adjust the volume.

On the main unit

1Select “PRESET” with [TUNING MODE].

2Press [TUNING (X or W)] to select the channel.

Preset channel

Basic operations

RQT5355

H/I

324 11

DECK 1/2 @

DECK 1/2

OPEN

DOLBY NR

REV MODE

VOLUME

DOWN

Î

ÎNR1

ÎNR

Cassette tapes

Preparation: Press [ê/I] to turn the unit on.

1Press [< OPEN] on deck 1 or deck 2

and insert the cassette.

2Press [DOLBY NR] to select Dolby NR

on (“ëNR” appears) or off.

(➡ “Dolby noise reduction” page 19)

3Press [REV MODE] to select the re-

verse mode.

Each time you press the button:

h: One side is played.

d: Both sides are played.

f: Both sides are played 8 times each.

4Press ["] (reverse side) or [!] (forward side).

Play begins and the indicator changes to green.

5Adjust the volume.

To stop the tape

Press [º].

[A] To change the deck to be used

Press [DECK 1/2] to select the deck you want to play.

To listen to 2 tapes consecutively

Insert a tape into each deck and select “f”. Both tapes will be

played 8 times each.

Cassette tape selection and care

The unit can correctly play the following types. It identifies the type

automatically.

³Tapes exceeding 100 minutes are thin and can break or get caught

in the mechanism.

³Tape slack can get caught up in the mechanism and should be tak-

en up before the tape is played.

³Endless tapes can get caught up in the deck’s moving parts if used

incorrectly. Use tapes appropriate to this unit’s auto-reverse mech-

anism.

Normal position/TYPE I ✔

High position/TYPE II ✔

Metal position/TYPE IV ✔

Forward side

Tape facing down

Tape direction

Deck in use

Basic operations

RQT5355

F, G

DECK 1/2

Cassette tapes

AFast-forwarding and rewinding

Press [6] or [5] while the tape is

stopped.

For your reference:

³Each deck’s play direction is stored in the system’s memory.

³You can fast forward or rewind the tape while you are playing or

recording a tape in another deck. Press [DECK 1/2] to switch to the

non playing deck, and then press [6] or [5]. After the above

operation, be sure to press [DECK 1/2] to reselect the deck in which

you are playing a tape.

BTape program sensor (TPS)

TPS finds the beginning of a track and resumes play from there.

Press [6] or [5] during play.

Tape direction rewind fast-forward

!65

"56

Dolby noise reduction manufactured under license from

Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby

Laboratories.

Note

TPS may not operate correctly in the following situations:

If the interval between tracks is less than 4 seconds.

If there is noise between tracks.

If there are silent parts within tracks.

Dolby noise reduction

Dolby NR reduces “hissing” when playing tapes. It increases the high

frequency region when recording and then reduces it in playback.

Use the same system during playback and recording. This unit has

Dolby B NR which reduces noise to a third.

Prerecorded cassettes and equipment marked “ë” use Dolby B NR.

Tape direction backward forward

!65

"56

Changing sound field and quality

RQT5355

SC-EH760

SC-EH560

1 1

MULTI

CONTROL

3D AI EQ/

M.EQ BAND

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

FLAT

HEAVY

CLEAR

AI-EQ

M.EQ

HALL

MULTI JOG

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

LOW

MID

HIGH

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

b c d

AChanging sound field and

quality

Changes to sound field and quality have no effect on recordings.

[SC-EH760]

Turn [MULTI JOG] to select a setting.

[SC-EH560]

Press [EQ] to select a setting.

Each time you turn [MULTI JOG] (SC-EH760) or press [EQ]

(SC-EH560):

HEAVY: Adds punch to rock.

CLEAR: Clarifies higher sounds.

HALL: Expands sound to make you feel like you were in a hall.

AI-EQ: Adjust sound with the acoustic image equalizer

(➡ page 21).

M.EQ: Create your own effects (➡ see below).

FLAT: Canceled (no effect is added).

On the remote control

Press [EQ].

Note

Turn off the effect if sound quality reduces when using HALL or 3D AI

EQ with a source.

BUsing the manual equalizer

Create your own sound quality effects.

1[SC-EH760]

Turn [MULTI JOG] to select “M.EQ”.

[SC-EH560]

Press [EQ] to select “M.EQ”.

2Press [3D AI EQ/M.EQ BAND] to se-

lect the band.

Each time you press the button:

LOW>MID>HIGH

^------------------------}

3Use [", !, #, $] to make the re-

quired curve.

1Select the frequency you want to use as the peak with [",

!].

2Adjust the level of the peak with [#, $].

³Adjacent frequencies are adjusted at the same time to

maintain a smooth curve.

³When you have adjusted the curve, you can move the

peak of the curve by pressing [", !] (a).

Repeat steps 2 and 3 to adjust the three bands.

The original display is restored on the display panel in about

5 seconds.

To cancel

Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select

“FLAT”.

Note

³The changes you make are stored and automatically recalled the

next time you select “M.EQ”.

³After making a curve in one band, any adjustments in another band

make a curve that is a combination of the two.

[C] To flatten the curves in all three bands

Set the frequencies b in LOW, c in MID, and d in HIGH to flat.

(On the tuner amplifier)

(On the sound processor)

(On the tuner amplifier)

(On the sound processor)

Changing sound field and quality

RQT5355

SC-EH760

SC-EH560

1 32

132

3D AI EQ/

M.EQ BAND

DIGITAL

S.WOOFER S.WOOFER

SC-EH760 SC-EH560

DIGITAL

S.WOOFER S.WOOFER

SC-EH760 SC-EH560

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

MULTI JOG

MULTI

CONTROL

MULTI JOG

Changing sound field and quality

AUsing the acoustic image equalizer

(3D AI EQ)

Achieve subtle sound quality settings with the soft, sharp, heavy, and

light coordinates.

Select one of the two 3D settings for a surround effect.

1[SC-EH760]

Turn [MULTI JOG] to select “AI-EQ”.

[SC-EH560]

Press [EQ] to select “AI-EQ”.

2Press [3D AI EQ/M.EQ BAND] to se-

lect the surround level.

Each time you press the button:

AI EQ>3D AI 1>3D AI 2

^__-----------------__}

3Change the sound quality with [", !,

#, $].

1Adjust softness and sharpness with [", !].

2Adjust heaviness and lightness with [#, $].

The original display is restored on the display panel in about

5 seconds.

To cancel

Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select

“FLAT”.

Note

³The changes you make are stored and automatically recalled the

next time you select “AI-EQ”.

³“3D AI 1” and “3D AI 2” cannot be selected while the surround sys-

tem or karaoke mode is on (➡ page 22 or 40).

BBoosting the super woofer

[SC-EH760]

Press [DIGITAL S.WOOFER].

[SC-EH560]

Press [S.WOOFER].

The indicator lights.

Each time you press the button:

MID (medium)>MAX (high)>cancel

^_______---------------__}

There is only one level when listening through headphones.

To cancel

Press [DIGITAL S.WOOFER] (SC-EH760) or [S.WOOFER]

(SC-EH560) to turn the indicator off.

(On the tuner amplifier)

(On the sound processor)

(On the tuner amplifier)

Changing sound field and quality

RQT5355

This mode adds stereo-like effects to

monaural sources.

Any monaural sound source except for the

radio.

³Video tape

³CD

³Tape

Enjoying surround sound

The following chart gives a summary of this unit’s surround features. It also shows additional features that can be used to enhance your enjoyment.

Note

³All the features are only effective if speakers are used. No discernible effect will be heard through headphones.

³You may experience a reduction in sound quality when these surround systems and effects are used with some sources. If this occurs, either turn

the surround system or effect off or reduce the level of the effect.

Surround system Features Software

[SC-EH760]

SUPER

SURROUND

(➡ page 26)

Any stereo sound source except for the

radio.

³Video tape

³CD

³Tape

MOVIE

MUSIC

SIMULATED STEREO

(➡ page 26)

[SC-EH760]

6CH DISCRETE INPUT

(➡ page 24)

³Use this input selector to enjoy

5.1 channel sources (e.g. Dolby Digital

or DTS) played on a DVD player with

5.1 channel output and a built in Dolby

Digital/DTS decoder (➡ page 38 for

connection, page 24 for operation).

³Connect a subwoofer (not included) to

the SUBWOOFER OUT terminal to

enhance the surround effect (➡ page 24

for operation).

DVDs encoded with Dolby Digital or DTS

can be identified with these marks.

See the manual for the equipment you

have connected for details on the types of

software you can use.

[SC-EH760]

DOLBY PRO LOGIC

(➡ page 25)

³Dolby Pro Logic is a decoding system that was

developed to get a better sense of presence

from sources encoded with Dolby Surround.

The feeling of position has been improved by

the addition of a separate center speaker

channel.

³This unit has built-in Dolby Pro Logic circuitry

so you can enjoy Dolby Surround by

connecting the speakers.

³If your DVD player only has 2-channel output,

you can still enjoy surround sound when

playing 5.1 channel software by using Dolby

Pro Logic.

Software encoded with Dolby Surround

can be identified with this mark.

³DVD

³Laser Disc

³Video tape

³CD

[SC-EH560]

VIRTUAL DOLBY SURROUND

(➡ page 26)

This mode enables you to play sources

recorded in Dolby Digital or Dolby Pro

Logic through the two front speakers, but

with a surround-like effect.

Software encoded with Dolby Digital or

Dolby Surround can be identified with

these marks.

³DVD

³Laser Disc

³Video tape

³CD

³This mode adds surround effects to

movie software that hasn’t been

recorded with the above systems.

³In MOVIE mode you can adjust the

volume of the surround speakers to get

the best surround effect.

This mode adds surround effects to stereo

sources.

Amplifier modes

[SC-EH760]

When using the above surround systems (except for SIMULATED STEREO), the

amplifier is automatically switched to the surround mode.

In all other cases, the TRI-AMP mode (stereo) is engaged. In this mode, three

separate amplifiers are used to drive the three sections (LOW, MID, and HIGH) of

the two front speakers.

[SC-EH560]

The TRI-AMP mode is active at all times.

(Tuner amplifier)

Surround mode TRI-AMP mode (stereo)

Changing sound field and quality

RQT5355

Additional effects

ACenter focus

BVirtual rear surround

CMulti rear surround

D3D enhanced surround

GSeat position

ACenter focus

BVirtual rear surround

CMulti rear surround

D3D enhanced surround

GSeat position

ECenter effect

FSurround effect

GSeat position

BVirtual rear surround

CMulti rear surround

D3D enhanced surround

GSeat position

[SC-EH760]

BVirtual rear surround

(➡ page 27)

³This mode is useful if you have to place

your surround speakers near the front

speakers due to the layout of your room.

³This mode makes it seem like the sound

from the surround speakers is coming

from behind you.

Virtual speakers

[SC-EH760]

D3D enhanced surround

(➡ page 27)

This mode adds width to the sound from

the surround and front speakers.

[SC-EH760]

ACenter focus (➡ page 27)

³This mode makes it seem like the sound

from the center speaker is coming from

within the television.

You can select one of two levels.

³The center speaker should be placed on

top of the television.

[SC-EH560]

ECenter effect (➡ page 28)

FSurround effect (➡ page 28)

When you are using Virtual Dolby

Surround, you can adjust the sound that is

directed to the virtual center and surround

speakers in three levels.

GSeat position (➡ page 29)

This mode helps maintain the sound

position even if the listening position itself

is changed.

Virtual center

speaker

Manufactured under license from Dolby

Laboratories Licensing Corporation.

DOLBY, the double-D symbol ë and

“PRO LOGIC” are trademarks of Dolby

Laboratories Licensing Corporation.

When you select a surround effect, the

indicators corresponding to the effects you

can use with that surround effect light

orange.

“DTS” and “DTS Digital Surround” are

trademarks of Digital Theater Systems,

Inc.

[SC-EH760]

CMulti rear surround

(➡ page 27)

This mode makes it seem like there are

multiple surround speakers in your room,

increasing the cinema-like atmosphere.

Virtual speakers

Virtual surround

speakers

Changing sound field and quality

RQT5355

Enjoying surround sound

6CH DISCRETE INPUT

Preparation:

Connect a DVD player with a built in Dolby Digital or DTS decoder

(➡ page 38).

1Press [6CH DISCRETE INPUT].

2Playback a Dolby Digital or DTS

source on the DVD player.

3Adjust the volume.

To cancel

Press [INPUT SELECTOR] to select another source.

If you have connected a subwoofer

Press and hold [DIGITAL S.WOOFER] until “SUB W ON” is dis-

played.

[A] Speaker level adjustments

If the level of the speakers appears to be different while listening to a

source, adjust the level of the speakers to the same apparent level.

While playing a Dolby Digital or DTS source

1Press [CH SELECT] to select the speaker to adjust.

Each time you press the button:

Lch: Front left speaker

Cch: Center speaker

Rch: Front right speaker

RSch: Right surround speaker

LSch: Left surround speaker

SWch: Subwoofer (only when connected)

2Press [3] (to increase level) or [4] (to decrease level).

Repeat steps 1 and 2 to adjust the level accordingly.

³If your DVD player is able to output a test signal, you can use it

instead of playing a source.

Note

You cannot record or enjoy karaoke (for Australia and N.Z. only)

when you are using 6CH DISCRETE INPUT. To record or enjoy

karaoke with DVDs, ensure the DVD player is also connected to the

AUX (DVD) IN terminals and select “AUX (DVD)” with [INPUT

SELECTOR] (➡ page 39).

1 3

INPUT SELECTOR DIGITAL

S.WOOFER

VOLUME

DOWN

6CH

DISCRETE INPUT

CH SELECT

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g¤ ¤»

MUTING

∂ VOLUME µ

TEST

3D AI EQ/M.EQ BAND

SC-EH760

Changing sound field and quality

RQT5355

PRO LOGIC

OFF/ON

∂ VOLUME µ

TEST

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g¤ ¤»

MUTING

∂ VOLUME µ

TEST

3D AI EQ/M.EQ BAND

Enjoying surround sound

DOLBY PRO LOGIC

1Press [ë PRO LOGIC, OFF/ON].

The indicator turns green.

2Playback a Dolby Surround source.

To cancel

Press [ë PRO LOGIC, OFF/ON] so the indicator goes out.

[A] Speaker level adjustments

If the level of the speakers appears to be different while listening to a

source, adjust the level of the speakers to the same apparent level.

1Press [TEST] to output a test signal.

The speaker outputting the test signal is displayed.

Lch: Front left speaker

Cch: Center speaker

Rch: Front right speaker

Sch: Surround speakers

2Press [VOLUME (j or i)] to set the volume level of the front

speakers normally used for enjoying the source.

3Press [3] (to increase level) or [4] (to decrease level) for center

and surround speakers.

To stop the test signal, press [TEST] again.

SC-EH760

Changing sound field and quality

RQT5355

SC-EH760 SC-EH560

SC-EH760

SC-EH560

VIRTUAL

DOLBY SURROUND

SUPER

SURROUND

SIMULATED

STEREO

SUPER

SURROUND

SUPER

SURROUND

VIRTUAL

DOLBY SURROUND

SIMULATED

STEREO

DISPLAY MODE

UV DEMO

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g¤ ¤»

MUTING

∂ VOLUME µ

TEST

3D AI EQ/M.EQ BAND

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

CH SELECT

VOLUME∂, µ

Enjoying surround sound

AVIRTUAL DOLBY SURROUND

Press [VIRTUAL DOLBY SURROUND].

The indicator turns green.

To cancel

Press [VIRTUAL DOLBY SURROUND] so the indicator goes out.

Virtual speaker level adjustments

You can adjust the level (1, 2 or 3) of the virtual center and surround

speakers (only when CENTER EFFECT or SURROUND

EFFECT is on) (➡ page 28).

1Press and hold [DISPLAY MODE, –ëV DEMO] to output a

demo signal.

The speaker outputting the demo signal is displayed.

Lch: Front left speaker

Cch: Center speaker (virtual)

Rch: Front right speaker

Sch: Surround speakers (virtual)

2Set the volume level of the front speakers normally used for en-

joying the source. ([C])

3Press [3] (to increase level) or [4] (to decrease level) for center

and surround speakers. ([C])

To stop the demo signal, press and hold [DISPLAY MODE, –ëV

DEMO] again.

BSUPER SURROUND

Press [SUPER SURROUND] and select

“MOVIE” or “MUSIC”.

The indicator turns green.

Each time you press the button:

MUSIC>MOVIE>SIMULATED STEREO

^----------STEREO SOUND (off)(---------}

To cancel

Press [SUPER SURROUND] to select “STEREO SOUND”. The indi-

cator goes out.

[C] Surround speaker level adjustments

While playing a source

1Press [CH SELECT].

2Press [3] (to increase level) or [4] (to decrease level).

DSIMULATED STEREO

[SC-EH760]

Press [SUPER SURROUND] and select

“SIMULATED STEREO”.

Each time you press the button:

MUSIC>MOVIE>SIMULATED STEREO

^----------STEREO SOUND (off)(---------}

[SC-EH560]

Press [SIMULATED STEREO].

The indicator turns green.

To cancel

[SC-EH760]

Press [SUPER SURROUND] to select “STEREO SOUND”. The indi-

cator goes out.

[SC-EH560]

Press [SIMULATED STEREO] so the indicator goes out.

(On the tuner amplifier)

(On the sound processor)

SC-EH560

SC-EH760

Changing sound field and quality

RQT5355

MULTI REAR

SURROUND

VIRTUAL REAR

SURROUND

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

3D ENHANCED

SURROUND

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

MULTI REAR

SURROUND

CENTER

FOCUS

VIRTUAL REAR

SURROUND 3D ENHANCED

SURROUND

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TEST

3D AI EQ/M.EQ BAND

CENTER

FOCUS

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

Surround effects [SC-EH760]

These effects are available when the corresponding indicators are

alight.

ACENTER FOCUS

Press [CENTER FOCUS].

The indicator turns green.

Each time you press the button:

CENTER FOCUS1>CENTER FOCUS2>(off)

^_____----------------------------------------___}

To cancel

Press [CENTER FOCUS] so the indicator turns orange.

On the remote control

1Press [AV EFFECT].

2Press [2] or [1] so the “CENTER FOCUS” indicator flashes.

3Press [3] (to turn on or increase level) or [4] (to decrease level

or turn off).

(The indicator turns orange when off.)

BVIRTUAL REAR SURROUND

Press [VIRTUAL REAR SURROUND].

The indicator turns green.

To cancel

Press [VIRTUAL REAR SURROUND] so the indicator turns orange.

On the remote control

1Press [AV EFFECT].

2Press [2] or [1] so the “VIRTUAL REAR SURROUND” indicator

flashes.

3Press [3] (ON) or [4] (OFF).

(The indicator turns orange when off.)

CMULTI REAR SURROUND

Press [MULTI REAR SURROUND].

The indicator turns green.

To cancel

Press [MULTI REAR SURROUND] so the indicator turns orange.

On the remote control

1Press [AV EFFECT].

2Press [2] or [1] so the “MULTI REAR SURROUND” indicator

flashes.

3Press [3] (ON) or [4] (OFF) .

(The indicator turns orange when off.)

D3D ENHANCED SURROUND

Press [3D ENHANCED SURROUND].

The indicator turns green.

To cancel

Press [3D ENHANCED SURROUND] so the indicator turns orange.

On the remote control

1Press [AV EFFECT].

2Press [2] or [1] so the “3D ENHANCED SURROUND” indicator

flashes.

3Press [3] (ON) or [4] (OFF).

(The indicator turns orange when off.)

(On the tuner amplifier)

(On the sound processor)

(On the tuner amplifier)

(On the sound processor)

(On the tuner amplifier)

(On the sound processor)

(On the tuner amplifier)

(On the sound processor)

Changing sound field and quality

RQT5355

CENTER

EFFECT

SURROUND

EFFECT

1112 22

MULTI

CONTROL

MULTI

CONTROL

AV EFFECT

SLEEP

PROGRAM

123

456

7890

j/-/--

CANCEL

VIRTUAL

S.WOOFERSIMULATED

STEREO

3D AI EQ/M.EQ BAND

Surround effects [SC-EH560]

These effects are available when the corresponding indicators are

alight.

ACENTER EFFECT

1Press [CENTER EFFECT].

The indicator flashes green.

2While the indicator is flashing (within 10 seconds)

Press [3] (to increase level) or [4] (to

decrease level).

There are three levels.

To cancel

1Press [CENTER EFFECT] so the indicator flashes green.

2Press [CENTER EFFECT] again while the indicator is flashing so

it turns orange.

On the remote control

1Press [AV EFFECT].

2Press [2] or [1] so the “CENTER EFFECT” indicator flashes.

3Press [3] (to turn on or increase level) or [4] (to decrease level).

To turn it off, after steps 1 and 2 press [4] so the indicator turns

orange.

BSURROUND EFFECT

1Press [SURROUND EFFECT].

The indicator flashes green.

2While the indicator is flashing (within 10 seconds)

Press [3] (to increase level) or [4] (to

decrease level).

There are three levels.

To cancel

1Press [SURROUND EFFECT] so the indicator flashes green.

2Press [SURROUND EFFECT] again while the indicator is

flashing so it turns orange.

On the remote control

1Press [AV EFFECT].

2Press [2] or [1] so the “SURROUND EFFECT” indicator flashes.

3Press [3] (to turn on or increase level) or [4] (to decrease level).

To turn it off, after steps 1 and 2 press [4] so the indicator turns

orange.

Changing sound field and quality

RQT5355

SC-EH760

SC-EH560 21

SEAT

POSITION

SC-EH760

SC-EH560

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g¤ ¤»

MUTING

∂ VOLUME µ

TEST

3D AI EQ/M.EQ BAND

432

MULTI JOG

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

Surround effects

SEAT POSITION

1Press [SEAT POSITION].

The indicator flashes green.

2While the indicator is flashing (within 10 seconds)

Adjust the seat position.

To cancel

1Press [SEAT POSITION] so the indicator flashes.

2Press [SEAT POSITION] again while the indicator is flashing so it

turns orange.

On the remote control

1Press [AV EFFECT].

2Press [2] or [1] so the “SEAT POSITION” indicator flashes.

3Press [3] (ON).

4Adjust the seat position with [2, 1, 3, 4] (SC-EH760) or [2, 1]

(SC-EH560).

To turn it off, after steps 1 and 2 press [4] so the indicator turns

orange.

[SC-EH760]

With virtual rear surround

or 3D enhanced surround

3 horizontal steps

[SC-EH560]

5 horizontal steps

(On the tuner amplifier)

(On the sound processor)

Recording operations

RQT5355

COUNTER

DISPLAY

COUNTER

RESET

RESET DISPLAY

3 5 2

DECK 1/2

Your attention is drawn to the fact that recording pre-recorded

tapes or discs or other published or broadcast material may

infringe copyright laws.

Before recording

(Deck 2 only)

Note

[SC-EH760]

You cannot record when [6CH DISCRETE INPUT] is selected.

(“ERROR” appears.)

Selection of tapes for recording

The unit automatically identifies the type of tape.

Normal position/TYPE I ✔

High position/ TYPE II ✔

Metal position/ TYPE IV ✔

ATo display the tape counter while recording

Press [COUNTER DISPLAY].

The counter is displayed for about 5 seconds.

To reset the tape counter

Press [COUNTER RESET].

³To display or reset the tape counter for deck 1, first press

[DECK 1/2].

BErasure prevention

The illustration shows how to remove the tabs to prevent recording.

To record on the tape again, cover as shown, being careful not to

cover the high position discrimination hole.

Volume, sound quality and surround effects

These have no effect on recording. Sound quality and surround

effects are automatically set to flat when recording.

CErasing recordings

1Press [INPUT SELECTOR] to select “TAPE”.

2Insert the recorded tape into deck 2.

3Press [DOLBY NR] so the “ëNR” indicator goes out.

4Select the reverse mode.

5Press [´ REC PAUSE].

6Press ["] or [!].

Side A

Tab for side “B” Tab for side “A”

To re-record

Normal tape High-position tape

Discrimination hole

Recording operations

RQT5355

DOLBY NR

REV MODE

OPEN

Î

2ÎNR

Before recording (Deck 2 only)

Preparatory steps

Do these steps before each recording.

Wind up the leader tape in deck 2 so recording can begin imme-

diately.

1Press [< OPEN] on deck 2 and insert

the cassette.

Insert the cassettes on both decks for tape-to-tape recording

(➡ page 33).

DECK 1: For playback

DECK 2: For recording

2Press [DOLBY NR] to select Dolby NR

on (“ëNR” appears) or off.

(➡ “Dolby noise reduction” page 19)

3Press [REV MODE] to select the re-

verse mode.

Each time you press the button:

h: One side only records.

d and f: Both sides record (forward> reverse).

“f” automatically changes to “d” when [´ REC PAUSE],

[EDIT] or [TAPE EDIT] is pressed.

Forward side

Tape facing down

Recording operations

RQT5355



DISC1–5

EDIT

SC-EH760 SC-EH560

SC-EH760

SC-EH560

EDIT

ÎNR2

REC

EDIT

REC

PAUSE

Î

NR2

REC



EDIT

Recording CDs

Preparation:

³Do the preparatory steps (➡ page 31).

³Insert the CD(s) you want to record (➡ page 12).

³[SC-EH760]

Press [DISC 1]–[DISC 5] on the CD changer to select the disc

where you want to start recording, then press [º] to stop the disc.

ANormal recording

1Press ["] (reverse side) or [!] (forward side)

then [º] to set the tape direction.

2Press [´ REC PAUSE].

The deck goes into the recording standby mode and the indi-

cator “"” or “!” starts flashing.

3Press [!] on the CD changer or CD

player.

Recording starts automatically.

4 seconds after the CD(s) finishes, the deck goes into the recording

standby mode.

To stop recording

EITHER

Press [º] on the CD changer or CD player.

The deck goes into the recording standby mode 4 seconds later.

Press [º] on the deck.

Recording stops immediately but the CD continues to play.

To record programmed tracks

Program tracks before step 1 (➡ page 14).

BOne touch CD editing

This function makes it easier for you to record from discs.

³When recording, if a track is cut off in the middle at the end of the

front side, it is recorded from the beginning on the reverse side.

³At the end of the reverse side recording stops and the current track

will be interrupted.

After pressing ["] or [!] then [º] on the cassette deck to set the tape

direction,

Press [EDIT].

Recording starts. In the meantime, “CD EDIT” will scroll across the

display from right to left.

After edit-recording has finished

The cassette deck automatically stops.

To stop editing

Press [º] on the CD changer or CD player. The cassette deck also

stops.

“EDIT OUT” is displayed.

To edit programmed tracks

Program the tracks (➡ page 14) and press [EDIT].

Recording operations

RQT5355

REC

PAUSE

DECK 1/2

TAPE EDIT

ÎNR2 REC

2REC1

ARecording the radio

Preparation: Do the preparatory steps (➡ page 31).

1Tune to the required station.

(➡ page 16 or 17)

2Press [´ REC PAUSE].

The deck goes into the recording standby mode and the play

indicator “"” or “!” starts flashing.

3Press ["] (reverse side) or [!] (forward side) to

start recording.

To stop recording

Press [º].

To temporarily stop recording

Press [´ REC PAUSE].

The deck goes into recording standby mode.

To resume recording press ["] or [!] with the flashing indicator.

BTape-to-tape recording

Preparation: Do the preparatory steps 1 and 3 (➡ page 31).

1Set the tape direction on both decks.

1Press [DECK 1/2] to select “DECK 2”.

2First press ["] or [!], and then [º].

Repeat steps 1 and 2 for deck 1.

2Press [TAPE EDIT] to start recording.

The indicator “"” or “!” shows deck 2 direction.

If either deck 1 or deck 2 stops, the other deck also stops.

To stop recording

Press [º].

Both decks will stop.

To enjoy another source while recording

Start playing the other sound source.

You can change the volume level and tone quality without affecting

the recording.

Note

The recording level and the noise reduction effect of the original

(playback) tape will be recorded on the new tape.

Timer operations

RQT5355

Using the timers

The play timer

This timer starts play of the selected source at the selected time. The

example shows settings for preset radio channel 8 to play between

6:30 and 7:40 at j40 dB.

Preparation: Turn the unit on, set the time (➡ page 11), preset

radio stations if you want the timer to start playing

the radio (➡ page 17).

11Press [CLOCK/TIMER, –DEMO] to

select “FPLAY.”

Each time you press the button:

CLOCK>FPLAY>FREC>Original display

^-------------------------------------------------------------------}

2Press [SET] within 3 seconds.

2–5

1Press [TUNING (X or W)] to select

the condition required and

2press [SET].

2 Select the start time.

3 Select the finish time.

4 Select the source.

TUNER()CD()TAPE

^----------------------------------J

Insert a CD or tape if you select these sources.

If you select TUNER

Select a preset channel.

5 Select the volume.

The play timer is now on standby. The display shows each

condition again then restores the original display.

6Press [ê/I] to turn the unit off.

“FPLAY/FREC” indicator remains illuminated to show the

play (or record) timer is on even when ECO mode is selected

(➡ page 11).

The timer starts at the set time with the volume increasing gradually

to the set level.

To cancel the timer

Press [FPLAY/FREC] so “FPLAY” goes out.

Each time you press the button:

FPLAY>FREC>FPLAY FREC>Light off (OFF)

^---------------------------------------------------------------------------------}

The play timer function will be canceled, but the settings stay in the

memory.

For your reference:

When you insert cassettes in decks 1 and 2, deck 1 has priority.

6 1 2–5

œPLAY/œREC

SET

CLOCK/TIMER

DEMO

SET

FPLAY

2–5

TUNING

FPLAY

MHz

FPLAY

H/I

Timer operations

RQT5355

2–4

SET

CLOCK/TIMER

DEMO

SET

6 1 2–4

œPLAY/œREC

FREC

FRE

TUNING

FREC

MHz

H/I

Using the timers

The record timer

This timer records the radio at the set time.

The example shows settings for recording preset channel 8 from

18:30 to 19:30.

Preparation: Turn the unit on, set the time (➡ page 11), preset

radio stations (➡ page 17).

11Press [CLOCK/TIMER, –DEMO] to

select “FREC”.

Each time you press the button:

CLOCK>FPLAY>FREC>Original display

^-------------------------------------------------------------------}

2Press [SET] within 3 seconds.

2–4

1Press [TUNING (X or W)] to select

the condition required and

2press [SET].

2 Select the start time.

3 Select the finish time.

4 Select the preset channel.

The record timer is now on standby. The display shows each

condition again then restores the original display.

5Prepare for recording.

1Insert a tape into deck 2.

2Select the Dolby NR mode.

3Select the reverse mode.

4Select the tape direction.

6Press [ê/I] to turn the unit off.

“FPLAY/FREC” indicator remains illuminated to show the

record (or play) timer is on even when ECO mode is selected

(➡ page 11).

Recording starts 30 seconds before the set time with the volume mut-

ed during the set time.

To cancel the timer

Press [FPLAY/FREC] so “FREC” goes out.

Each time you press the button:

FPLAY>FREC>FPLAY FREC>Light off (OFF)

^---------------------------------------------------------------------------------}

The record timer function will be canceled, but the settings stay in the

memory.

Timer operations

RQT5355

CLOCK/TIMER

DEMO

œPLAY/œREC

SLEEP

AV EFFECT

SLEEP

CH SELECT

PROGRAM

123

456

7890

j/-/--

CANCEL

DISC

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g¤ ¤»

MUTING

∂ VOLUME µ

TEST

3D AI EQ/M.EQ BAND

SLEEP

Using the timers

AThe play and record timers

Checking the timers

Press [CLOCK/TIMER, –DEMO] to select “FPLAY” (or “FREC”).

The timer conditions are shown in the following order:

Play timer:

Start time>Finish time>Source>Volume

Record timer:

Start time>Finish time>Broadcast station you select

The timers can be checked even if the unit is off.

Playing the unit after the timers are set

The unit can be used after the timers are set. Make sure the unit is off

before the set start time.

Turning the timers on and off

The timers come on at the set times if “FPLAY/FREC” indicator is

illuminated. They can be turned on and off by pressing [FPLAY/

FREC] (➡ pages 34 and 35).

Note

³If you turn the unit off and on again while a timer is functioning, the

finish time setting will not be activated.

³If the power is on, the timer will not function. The system must be in

the standby mode.

³This system retains the ON/OFF time settings until you make a new

setting. If you make a new ON time setting, you must make a new

OFF time setting.

BThe sleep timer

Remote control only

This timer turns the unit off after a set time.

While playing a source

Press [SLEEP] to select the time

(minutes).

Each time you press the button:

SLEEP 30_--)SLEEP 60_--)SLEEP 90

^-=SLEEP OFF(=SLEEP 120(_}

To cancel the sleep timer

Press [SLEEP] to select “SLEEP OFF”.

“SLEEP” goes out.

To confirm the remaining time

(While the timer is functioning)

Press [SLEEP].

The remaining time is shown for about 5 seconds.

To change the setting

Press [SLEEP] to display the remaining time, then press again to se-

lect the required time.

Using the timers together

Any of the timers can be used together, but ensure the unit is off be-

fore the start time for the record and play timers.

Convenient functions

RQT5355

SC-EH760 SC-EH560

DISPLAY MODE

UV DEMO

DISPLAY MODE DISPLAY MODE

–UV DEMO

SC-EH760 SC-EH560

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

VCR/AUX/

6CH INPUT TAPE/

DECK 1/2

PRO LOGIC DIGITAL

S.WOOFER

SUPER

SURROUND

TUNER/

BAND

⁄/g ¤ ¤»

MUTING

M N

∂ VOLUME µ

TEST

MUTING

VOLUME

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

FLAT

HEAVY

CLEAR

HALL

AI-EQ

M.EQ

AChanging the sound range

display

The sound processor shows the level of each sound range with the

three types of display described below.

[SC-EH760]

Press [DISPLAY MODE].

[SC-EH560]

Press [DISPLAY MODE, –ëV DEMO].

The spectrum display will change as follows.

[a] Normal display

This display indicates the strength of the sound in each tonal

range.

[b] Peak-hold display

The peak sound value of each sound range is held on the dis-

play for about one second after it occurs.

[c] Aurora display

The peak sound value of each sound range is displayed in in-

verted form.

BMuting the volume

Remote control only

Press [MUTING].

Volume is reduced to minimum.

To cancel

Press [MUTING] again.

“MUTING” goes out and the volume is restored.

To cancel from the tuner amplifier, turn [VOLUME] to minimum

(–– dB), then raise it to the required level.

Muting is also canceled when the unit is turned off.

CUsing headphones

(not included)

Reduce the volume before connection.

Avoid listening for prolonged periods of time to prevent hearing

damage.

Plug type: 3.5 mm stereo

(On the sound processor)

(On the tuner amplifier)

Convenient functions

RQT5355

VCR

(EXT)

OUT IN

DVD 6ch INPUT

CENTER

SUBWOOFER

SURROUND FRONT

AUX

(DVD)

VCR

(EXT)

OUT IN

VIDEO

MONITOR

OUT

AUX

(DVD)

CENTER

AUDIO

L/R OUT

L/R OUT (MIX)

SUBWOOFER

FRONT L/R

SURROUND L/R

SC-EH760

AUDIO

OUT

AUDIO

VIDEO

IN VIDEO

OUT

SC-EH760

SC-EH760 for

Australia and

N.Z.

SC-EH560

VCR

OUT

VIDEO OUT

VIDEO IN

VCR

DVD

External unit connections

³Turn off all units before making connections.

³Refer to the manual of the other unit for details.

(Cables and equipment not included.)

Stereo phono cable (not included)

White

Red

Video connection cable (not included)

Connections to SC-EH760

[A] DVD player with 5.1ch output

This unit has the input terminals for 5.1ch surround systems but

it does not have the decoders necessary to play them back. The

DVD player should have these decoders and 5.1ch output.

To record sound from the DVD player

Connect to AUX (DVD).

Subwoofer

The included front speakers have subwoofers, but you can en-

hance surround sound from a unit connected to DVD 6ch

INPUT by connecting another subwoofer to SUBWOOFER

OUT (➡ page 24 for operation).

[B] DVD player/Laser disc player (without 5.1ch output),

etc.

This unit has Dolby Pro Logic circuitry. The sound will be repro-

duced with the same powerful stereophonic effects found in

movie theaters.

[C] Video cassette recorder

You can enjoy the sound from your video cassette recorder.

[D] Television set (For Australia and N.Z. only)

By connecting the video connection cable as shown in the illus-

tration, it is possible to switch both audio and video input with

[INPUT SELECTOR] of this unit.

Connections to SC-EH560

[B] DVD player/Laser disc player etc.

You can enjoy the sound from your DVD player/Laser disc

player etc.

[C] Video cassette recorder

You can enjoy the sound from your video cassette recorder.

DVD player with 5.1ch output

Sound

processor

DVD player/Laser disc player

(without 5.1ch output), etc.

Video cassette recorder

Sound

processor

Sound

processor

Video cassette recorder

Sound

processor

Television set

DVD player/Laser disc player

(R)

(L)

Convenient functions

RQT5355

INPUT SELECTOR

4 2 3

DOLBY NR

REC

PAUSE

REV MODE

Using other equipment

AListening to an external source

1Press [INPUT SELECTOR] to select

the external source.

Each time you press the button:

[SC-EH760]

TUNER>CD>TAPE>VCR (EXT)>AUX (DVD)

^----------------------------------------------------------------------------}

[SC-EH560]

TUNER>CD>TAPE>VCR (EXT)

^----------------------------------------------------}

On the remote control

Press [VCR/AUX/6CH INPUT] (SC-EH760) or [VCR]

(SC-EH560).

2Operate the unit.

See the unit’s manual for details on operation and connection.

To enjoy Dolby Digital and DTS

➡ page 24

BRecording an external source

1Press [INPUT SELECTOR] to select

the external source.

2Select Dolby NR and reverse mode.

(➡ page 31)

3Press [´ REC PAUSE].

4Press ["] or [!] to start recording.

5Start the source to be recorded.

See the unit’s manual for details on operation and connection.

To stop recording

Press [º] on the deck.

To temporarily stop recording

Press [´ REC PAUSE].

The deck goes into the recording standby mode.

To resume recording press ["] or [!] with the flashing indicator.

Recording onto an external unit

Select the source to be recorded with [INPUT SELECTOR].

Start recording on the external unit and start playing the source to be

recorded.

Convenient functions

RQT5355

2 1

ECHO 4

1 2

MIC

MIN MAX

MIC VOL

MIN MAX

MIC VOL

KARAOKE

VOLUME

DOWN

ECHO

MONO·L

MONO· R

V.MUTE

ECHO

3Start playing the CD or cassette.

4Adjust the main volume and micro-

phone volume.

To cancel

Press [KARAOKE] to clear the display.

To record your performance

Start recording in deck 2 and then start singing.

Ensure the voice mode is set to off (at step 2 above) when playing the

recording.

Note

The karaoke modes cannot be used with the radio, 3D AI EQ, 6CH

DISCRETE INPUT or surround effects.

When using the VOICE MUTE function

Voice mute may not function sufficiently or noise may interfere when

using the following software.

³Monaural software

³Software with few musical instruments, including classic music and

poetry recitations

³Software with duets or strong choruses

AUsing the echo effect

Press [ECHO].

Each time you press the button:

ECHO 1>ECHO 2>ECHO 3>OFF

^------------------------------------------------------}

Enjoy karaoke with CDs and

cassettes

(For Australia and N.Z. only)

1Lower the volume with [MIC VOL] and

connect the microphone.

Plug type: 6.3 mm monaural

2Press [KARAOKE] to select a voice

mode.

Each time you press the button:

MONO L>MONO R>VOICE MUTE>(off)

^-----------------------------------------------------------------}

Use this chart to select the appropriate mode.

±: appropriate ´: for practice ——: inappropriate

Non-

karaoke

——

(For singing

along)

Software

Voice

modes

MONO L

MONO R

VOICE MUTE

(off)

Karaoke

Sound

multiplex

(Background

music)

(Voice)

——

(Background

musiciVoice)

Stereo

——

RQT5355

Reference

Tape speed 4.8 cm/s

Wow and flutter 0.16 % (WRMS)

Fast forward and rewind times

Approx. 110 seconds with

C-60 cassette tape

Frequency response (Dolby NR off)

TYPE I (NORMAL) 20 Hz–16 kHz (DIN)

TYPE II (HIGH) 20 Hz–16 kHz (DIN)

TYPE IV (METAL) 20 Hz–16 kHz (DIN)

S/N (Signal levelumax recording level, TYPE II

type tape)

NR off 56 dB (A weighted)

Dolby B NR on 66 dB (A weighted)

Input sensitivity and impedance

REC (IN) 150 mV/23 k

Output voltage and impedance

PLAY (OUT) 280 mV/360 

ºGeneral

Dimensions (WtHtD) 294k118.5k281 mm

Mass 2.1 kg

FRONT SPEAKER [SC-EH760]

Type 3 way, 3 speakers

Speaker(s)

Super woofer 17 cm cone type

Woofer 12 cm cone type

Tweeter 6 cm ring shaped dome type

Impedance High 6 

Mid 6 

Low 8 

Input power (Music) High 60 W

Mid 60 W

Low 120 W

Output sound pressure level 87 dB/W (1.0 m)

Crossover frequency 120 Hz, 4 kHz

Frequency range 42 Hz–50 kHz (j16 dB)

46 Hz–36 kHz (j10 dB)

ºGeneral

Dimensions (WtHtD) 254k422k260 mm

Mass 6.4 kg

FRONT SPEAKER [SC-EH560]

Type 3 way, 3 speakers

Speaker(s)

Super woofer 14 cm cone type

Woofer 12 cm cone type

Tweeter 6 cm cone type

Impedance High 6 

Mid 6 

Low 6 

Input power (Music) High 40 W

Mid 40 W

Low 70 W

Output sound pressure level 84 dB/W (1.0 m)

Crossover frequency 150 Hz, 4 kHz

Frequency range 46 Hz–22 kHz (j16 dB)

50 Hz–20 kHz (j10 dB)

ºGeneral

Dimensions (WtHtD) 254k422k260 mm

Mass 6.0 kg

CENTER SPEAKER [SC-EH760]

Type 2 way, 2 speakers

Speaker

Woofer 10 cm cone type

Tweeter 6 cm cone type

Impedance 8 

Input power (Music) 120 W

Output sound pressure level 85 dB/W (1.0 m)

Crossover frequency 4 kHz

Frequency range 75 Hz–22 kHz (j16 dB)

ºGeneral

Dimensions (WtHtD) 250k121k147 mm

Mass 1.6 kg

SURROUND SPEAKER [SC-EH760]

Type 1 way, 1 speaker

Speaker

Full range 8 cm cone type

Impedance 8 

Input power (Music) 60 W

Output sound pressure level 84 dB/W (1.0 m)

Frequency range 120 Hz–20 kHz (j16 dB)

ºGeneral

Dimensions (WtHtD) 170k106k118 mm

Mass 0.9 kg

Note

1. Specifications are subject to change without

notice.

Mass and dimensions are approximate.

2. Total harmonic distortion is measured by the

digital spectrum analyzer.

Load impedance

FRONT (High/Mid) total impedance 6 

FRONT (Low) 8 

SURROUND 8 

CENTER 8 

S. WOOFER

Center frequency 70 Hz

LEVEL (VOL s20 dB) MID i8 dB

MAX i12 dB

ºAmplifier section [SC-EH560]

Power output (L/R both channel driven)

DIN 10 kHz THD 1 %/6  (High) 2k12 W

1 kHz THD 1 %/6  (Mid) 2k12 W

100 Hz THD 1 %/6  (Low) 2k36 W

RMS 10 kHz THD 10 %/6  (High) 2k18 W

1 kHz THD 10 %/6  (Mid) 2k18 W

100 Hz THD 10 %/6  (Low) 2k54 W

PMPO 1 kHz/Low 6 , Mid 6 , High 6 

1,400 W

Total harmonic distortion

Rated power at 1 kHz 1 % (6 )

Half power at 1 kHz 0.1 % (6 )

Load impedance Main (High) 6 

Main (Mid) 6 

Main (Low) 6 

S. WOOFER

Center frequency 70 Hz

LEVEL (VOL s20 dB) MID i8 dB

MAX i12 dB

ºFM tuner section

Frequency range 87.50–108.00 MHz

(0.05 MHz steps)

Sensitivity 1.8 ¬V (IHF usable)

S/N 26 dB 1.5 ¬V

S/N

MONO 70 dB (75 dB, IHF)

Antenna terminal(s) 75  (unbalanced)

ºAM tuner section

Frequency range 522–1629 kHz (9 kHz steps)

520–1630 kHz (10 kHz steps)

Sensitivity (S/N 20 dB) 500 ¬V/m

ºTimer section

Clock Quartz-lock type

Function Play timer (1 time, daily),

Rec timer (1 time, daily),

Sleep (120 min, 30 min intervals)

Setting intervals (Play/Rec)

1 minute–23 hours 59 minutes

(1 min intervals)

ºGeneral

Power supply

(For United Kingdom, Australia and N.Z.)

AC 230–240 V 50 Hz

(For others) AC 230 V 50 Hz

Power consumption [SC-EH760] 205 W

[SC-EH560] 110 W

Standby

Normal mode 11 W

ECO mode 0.5 W

Dimensions (WtHtD) 293k118.5k346 mm

Mass [SC-EH760] 5.3 kg

[SC-EH560] 4.3 kg

CD PLAYER

ºAudio

DA converter 1 bit DAC MASH

ºPickup

Wavelength 780 nm

ºGeneral

Dimensions (WtHtD)

[SC-EH760] 293k89k288 mm

[SC-EH560] 293k89k268 mm

Mass [SC-EH760] 2.2 kg

[SC-EH560] 1.6 kg

CASSETTE DECK

Deck system Stereo cassette deck

Track system 4 track, 2 channel

Recording system AC bias

Bias frequency 100 kHz

Erasing system AC erase

Heads

Deck 1

(Playback head) Permalloy head

Deck 2

(Recording/Playback head) Permalloy head

(Erasing head) Double gap ferrite head

Motors

Deck 1, 2

Capstan drive DC servo motor

SOUND PROCESSOR

ºEQ/SFP section

MANUAL GEQ

3-Band parametric EQ

Center frequency

High band

3.5 kHz, 5.3 kHz, 8 kHz, 12.5 kHz

Mid band 240 Hz, 390 Hz, 630 Hz, 1 kHz,

1.5 kHz, 2.3 kHz, 3.5 kHz

Low band 70 Hz, 90 Hz, 143 Hz, 240 Hz

Level control n1.2, 2.4, 3.6, 4.8, 6 dB

EQ SPACE mode

3 modes HEAVY, CLEAR, HALL

3D acoustic image EQ

3 modes AI EQ, 3D AI 1, 3D AI 2

ºPre-amplifier section [SC-EH760]

Input sensitivity/impedance

VCR (EXT) 250 mV/15 k

AUX (DVD) 250 mV/15 k

Output level

VCR REC OUT 150 mV/1.5 k

(For Australia and N.Z. only)

VIDEO OUTPUT

MONITOR OUT 1 Vp-p, 75 

VCR REC OUT 1 Vp-p, 75 

ºPre-amplifier section [SC-EH560]

Input sensitivity/impedance

VCR (EXT) 250 mV/15 k

Output level

VCR REC OUT 150 mV/1.5 k

ºDOLBY PRO LOGIC section [SC-EH760]

PRO LOGIC mode SURROUND

CENTER mode NORMAL

DELAY TIME 20 ms (Fixed)

ºVIRTUAL DOLBY SURROUND section

[SC-EH560]

Mode VIRTUAL DOLBY SURROUND

ºAV SURROUND section

AV surround mode SIMULATED STEREO

[SC-EH760] SUPER SURROUND

(MUSIC, MOVIE)

ºDSP CONTROL section

DSP control mode SEAT POSITION

[SC-EH760] CENTER FOCUS (1, 2),

[SC-EH760] VIRTUAL REAR SURROUND,

[SC-EH760] MULTI REAR SURROUND,

[SC-EH760] 3D ENHANCED SURROUND

[SC-EH560] CENTER EFFECT (1, 2, 3),

[SC-EH560] SURROUND EFFECT (1, 2, 3)

ºSpectrum analyzer section

Display mode NORMAL, PEAKHOLD, AURORA

ºGeneral

Dimensions (WtHtD)

[SC-EH760] 293k89k270 mm

[SC-EH560] 293k89k269 mm

Mass [SC-EH760] 1.5 kg

[SC-EH560] 1.4 kg

TUNER AMPLIFIER

ºAmplifier section [SC-EH760]

Power output (L/R both channel driven)

Stereo Mode

DIN 10 kHz THD 1 %/6  (High) 2k20 W

1 kHz THD 1 %/6  (Mid) 2k20 W

100 Hz THD 1 %/8  (Low) 2k50 W

RMS 10 kHz THD 10 %/6  (High) 2k30 W

1 kHz THD 10 %/6  (Mid) 2k30 W

100 Hz THD 10 %/8  (Low) 2k70 W

PRO LOGIC mode

DIN FRONT 1 kHz THD 1 %/TTL Imp. 6 

(High/Mid) 2k20 W

100 Hz THD 1 %/8  (Low)

2k50 W

SURROUND 1 kHz THD 1 %/8 2k20 W

CENTER 1 kHz THD 1 %/8 50 W

RMS FRONT 1 kHz THD 10 %/TTL

Imp. 6  (High/Mid)

2k30 W

100 Hz THD 10 %/8  (Low)

2k70 W

SURROUND 1 kHz THD 10 %/8 2k30 W

CENTER 1 kHz THD 10 %/8 70 W

PMPO 1 kHz/High or Mid 6 , Low 8 

CENT. 8 , SURR. 8 3,000 W

Total harmonic distortion

Rated power at 1 kHz 1 % (6 )

Half power at 1 kHz 0.1 % (6 )

Technical specifications

Reference

RQT5355

Troubleshooting guide

Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to the

enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.

Reference pages are shown as black circled numbers 6.

Common Problems

Noise is heard.

The stereo indicator flickers or

doesn’t light.

Sound is distorted.

A beat sound is heard.

A low hum is heard during AM

broadcasts.

The correct AM frequency can’t be

tuned in.

Use an outdoor antenna. 7

Turn the TV off or separate it from the unit.

Separate the antenna from other cables and leads.

Change the frequency step. Hold [TUNER/BAND] down for 10 seconds to change the step to 9 kHz.

The cassette deck

Poor quality sound.

Recording is not possible.

Clean the heads. [

Check the Dolby NR setting. B

If the erasure prevention tabs have been removed, cover the holes with adhesive tape. N

No sound.

Sounds unfixed, reversed or come

from one speaker only.

Humming heard during play.

“ERROR” is displayed.

“U70” is displayed.

“F61” is displayed.

ECO mode on but display still

lights up in standby mode.

“––:––” appears on the display.

Turn the volume up.

The speaker cords may be shorted. Turn the unit off, check and correct the connections and turn the

unit on. 6

Check the speaker connections. 6

An AC mains lead or fluorescent light is near the cables. Keep other appliances and leads away

from this unit’s cables.

If possible in your area, turn the AC mains lead’s plug or connector over to reverse the lead’s

polarity.

Incorrect operation performed. Read the instructions and try again.

Connect the flat cables firmly. If “U70” remains on the display, contact the dealer.

There is a problem with the tuner amplifier. Consult your dealer.

Turn DEMO off. ;

You plugged the AC mains lead in for the first time or there was a power failure recently.

Set the time. ;

Listening to the radio

When there is a television set nearby

The picture on the TV disappears

or stripes appear on the screen. The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change

to an outdoor antenna.

The TV antenna wire is too close to the system. Separate the antenna wire of the TV set from the

system.

Reference

RQT5355

For a cleaner crisper sound

Clean the heads regularly to assure good quality playback and

recording. Use a cleaning tape (not included).

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap-

and-water solution or a weak detergent solution.

³Never use alcohol, paint thinner or benzine to clean this unit.

³Before using chemically treated cloth, read the instructions that

came with the cloth carefully.

The CD changer or CD player

The display is wrong or play won’t

start.

[SC-EH760]

“TAKE OUT/DISC” appears on the

display.

The disc may be upside down. <

Wipe the disc.

Replace the disc if it is scratched, warped, or nonstandard.

Condensation may have formed in the changer or player due to a sudden change in temperature.

Wait about an hour for it to clear and try again.

There is a problem with the CD mechanism. (A power failure may have occurred.)

The tray will open automatically. Remove the CD from the tray, and after ensuring there is no CD in

the tray close it. The unit will make the disc changing noises for a few moments and then it should

operate normally.

During “One touch” editing (➡ page 32)

“DECK NO TAPE” is displayed.

“DECK CHANGE TAPE” is

displayed.

Load a cassette into deck 2. O

If the erasure prevention tabs have been removed, cover the holes with adhesive tape. N

The remote control

The remote control doesn’t work. Check the batteries are inserted correctly. :

Replace the batteries if they are worn.

All components are required to service the system. If service is ever necessary, bring the entire system.

Maintenance

Matsushita Electric Industrial Co., Ltd.

Osaka 542-8588, Japan

RQT5355-B

F0100MF1020

Technics Sc Eh560 Users Manual

Technics-Sc-Eh760-Sc-Eh560-Owners-Manual technics-sc-eh760-sc-eh560-owners-manual

EH760 36065f9f-7a3f-4e74-a6c9-5bc499eb53b7

36065f9f-7a3f-4e74-a.. 36065f9f-7a3f-4e74-a6c9-5bc499eb53b7

SC-EH560 to the manual 36065f9f-7a3f-4e74-a6c9-5bc499eb53b7

Navigation menu

Versions of this User Manual:

Views

Navigation