Technics Sl Pd9 Owner S Manual P1 3

SL-PD7A to the manual 2e93a7d2-7a22-44c5-befb-bb596d0a8e51

2014-07-06

: Technics Technics-Sl-Pd9-Owner-S-Manual technics-sl-pd9-owner-s-manual technics pdf

Open the PDF directly: View PDF .
Page Count: 16

Compact Disc Changer

SL-PD9

SL-PD7A

Operating Instructions

Model No.

PPC

Before connecting, operating or adjusting this product, please read these instructions

completely. Please keep this manual for future reference.

RQT5763-2P

The photograph shows model SL-PD9.

Before use

RQT5763

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these

instructions carefully.

______________________________________________________

These operating instructions are applicable to the SL-PD9 and

SL-PD7A models.

These operating instructions, however, fundamentally explain the

operation of SL-PD9 model.

______________________________________________________

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of suffi-

cient magnitude to constitute a risk of electric shock

to persons.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS

INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the ap-

pliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The model number and serial number of this product can be

found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for

future reference.

MODEL NUMBER!

SERIAL NUMBER

DATE OF PURCHASE ______________________________

DEALER NAME ___________________________________

DEALER ADDRESS ________________________________

_________________________________________________

TELEPHONE NUMBER _____________________________

User memo:

Table of Contents

Before use

IMPORTANT SAFETY INSTRUCTIONS............................ 3

Connections ...................................................................... 4

Preparing the remote control

SL-PD9 only

..................... 4

Front panel controls ......................................................... 5

Operations

Basic operations ............................................................... 6

Sequential play ............................................................................. 6

To directly access a desired track ................................................ 7

To exchange discs during play ..................................................... 7

Random play...................................................................... 8

One disc random play .................................................................. 8

Full random play ........................................................................... 8

Spiral play .......................................................................... 8

Program play ..................................................................... 9

ID scan function .............................................................. 10

Search function ............................................................... 10

Skip function ................................................................... 11

To skip discs............................................................................... 11

To skip tracks ............................................................................. 11

Repeat function ............................................................... 12

Time mode selection....................................................... 12

Edit guide function.......................................................... 13

Reference

Cautions concerning the moving of this unit ............... 14

Concerning CDs .............................................................. 14

Troubleshooting guide ................................................... 15

Maintenance .................................................................... 15

Product Service ............................................................... 15

Specifications ................................................... Back cover

Supplied accessories

Please check and identify the supplied accessories.

Use numbers indicated in parentheses when asking for

replacement parts.

(Only for U.S.A.)

To order accessories contact 1-800-332-5368 or web site

(http://www.panasonic.com).

AC power supply cord.................................................. 1 pc.

(RJA0065-A)

Note

The included AC power supply cord is for use with this unit

only. Do not use it with other equipment.

Stereo connection cable .............................................. 1 pc.

(RJL2P004B08A)

SL-PD9 only

Remote control transmitter .......................................... 1 pc.

(RAK-SL948WK)

SL-PD9 only

Remote control batteries............................................ 2 pcs.

Before use

RQT5763

IMPORTANT SAFETY INSTRUCTIONS

Safety

1. Power source—Connect the unit to a power source of the type

described in these instructions or as marked on the unit.

2. Polarization—The unit is equipped with a polarized power plug

where one blade is wider than the other. This safety feature

ensures that the plug fits into your household AC outlet only one

way. If the plug doesn’t fit one way, try reversing it. If the plug

still doesn’t fit, contact an electrician to replace the obsolete

outlet. Do not attempt to defeat the safety purpose of the plug.

3. Power cord protection—Route the AC power supply cord so

that it will not be walked on or pinched by items placed on or

against it. Never take hold of the plug or cord with wet hands.

Always grasp the plug body firmly when connecting and

disconnecting it.

4. Overloading—When connecting the AC power supply cord, be

careful not to overload the household AC outlet, extension cord,

or outlet from any other device as this can result in fire or electric

shock.

5. Nonuse periods—Turn the unit off when it is not in use. Unplug

the unit from the household AC outlet if it is not to be used for a

long time. Unplug the unit during lightning storms.

6. Attachments and accessories—Use only the attachments and

accessories recommended in these operating instructions.

Installation

Placement

1. Ventilation—Situate the unit so that it receives proper ventilation.

Do not install in a confined space such as a bookcase or cabinet.

Allow at least 10 cm (4 inches) clearance from the rear of the

unit. To prevent the risk of electric shock or fire due to overheating

ensure curtains and other materials do not obstruct the unit’s

ventilation.

2. Foreign material—Ensure objects and liquids do not get into

the unit. Avoid exposing the unit to excessive smoke, dust,

mechanical vibration, and shock.

3. Magnetism—Situate the unit away from equipment and devices

that generate strong magnetic fields.

4. Stacking—Do not place heavy objects on top of this unit.

5. Surface—Place the unit on a flat, level surface.

6. Carts and stands—Use the unit only with carts

and stands recommended by the manufacturer.

Move carts with care. Sudden stops, excessive

force, and uneven surfaces can cause carts to

overturn.

7. Wall and ceiling mounting—Do not mount the unit on walls or

ceilings unless specified in the instructions.

Environment

1. Water and moisture—Do not use the unit near water, such as

near a bathtub or swimming pool. Avoid damp basements.

2. Heat—Situate the unit away from heat sources, such as radiators.

Do not situate where temperatures fall below 5°C (41°F) or rise

above 35°C (95°F).

Maintenance

(See page 15 for details.)

Unplug the unit from the household AC outlet before cleaning.

Clean with a damp cloth.

Do not use abrasive pads, scouring powders, or solvents.

Service

1. Damage requiring service —The unit should be serviced by

qualified service personnel if:

(a) The AC power supply cord or the plug has been damaged; or

(b) Objects or liquids have gotten into the unit; or

(d) The unit does not operate normally or exhibits a marked

change in performance; or

(e) The unit has been dropped or the cabinet damaged.

2. Servicing —Do not attempt to service the unit beyond that

described in these operating instructions. Refer all other servicing

to authorized servicing personnel.

3. Replacement parts —When parts need replacing ensure the

servicer uses parts specified by the manufacturer or parts that

have the same characteristics as the original parts. Unauthorized

substitutes may result in fire, electric shock, or other hazards.

4. Safety check —After repairs or service, ask the servicer to

perform safety checks to confirm that the unit is in proper working

condition.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR PRODUCT DAMAGE, DO NOT

EXPOSE THIS APPARATUS TO RAIN, MOIS-

TURE, DRIPPING OR SPLASHING AND THAT

NO OBJECTS FILLED WITH LIQUIDS, SUCH

AS VASES, SHALL BE PLACED ON THE AP-

PARATUS.

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORM-

ANCE OF PROCEDURES OTHER THAN THOSE SPECI-

FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO QUALIFIED

PERSONNEL.

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below.

Keep these operating instructions handy for future reference.

CAUTION:

TO PREVENT ELECTRIC SHOCK MATCH

WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

CAUTION!

DO NOT INSTALL, OR PLACE THIS UNIT, IN A BOOK-

CASE, BUILT-IN CABINET OR IN ANOTHER CONFINED

SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO

PREVENT RISK OF ELECTRIC SHOCK OR FIRE

HAZARD DUE TO OVERHEATING, ENSURE THAT

CURTAINS AND ANY OTHER MATERIALS DO NOT

OBSTRUCT THE VENTILATION VENTS.

Before use

RQT5763

Connections

Before making connections, be sure that the power of this unit

and all other system components is turned off.

Conserving power

The unit consumes 1

W even when it is turned off with [ /I, POWER].

To save power when the unit is not to be used for a long time,

unplug it from the household AC outlet.

Note

Although the figure shows the AC power supply cord being

connected to a household AC outlet, if the amplifier (or receiver) is

equipped with a AC outlet, connect the cord to that outlet.

Digital connection

Remove the dust-protection cap and connect this unit to other

digital equipment with an optical fiber terminal, such as a receiver

or digital surround processor.

• Leave the cap attached when this terminal is not being used.

For your reference

If you have DTS format CDs, you can enjoy six channel playback

by connecting this unit to a receiver or digital surround processor

that has a DTS decoder.

Note

Use only the optical fiber terminal when playing back DTS format

discs. DTS signals can only be correctly output through the digital

terminal. Connection through the stereo LINE OUT terminals will

result in noise and could possibly damage your speakers.

• DTS is a trademark of Digital Theater Systems, L.P.

Preparing the remote control

SL-PD9 only

Battery installation

Use of batteries

• Align the poles (+ and –) properly when inserting the batteries.

• Do not mix old and new batteries, or different types of batteries.

• Do not recharge ordinary dry cell batteries.

• Do not heat or disassemble the batteries. Do not allow them to

contact flame or water.

• Remove the batteries if the unit is not to be used for a long time.

• Do not keep together with metallic objects such as necklaces.

• Do not use rechargeable type batteries.

• Do not use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can

damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer.

Wash thoroughly with water if electrolyte comes in contact with any

part of your body.

Correct method of use

Operation notes

• Aim the remote control’s transmission window toward the unit’s

sensor. Avoid any obstacles.

• Be sure the transmission window and the unit’s sensor are free

from dust. Excessive dust might affect performance.

• Do not expose the remote control signal sensor to direct sunlight

or to the bright light of a fluorescent light.

To prevent damage

• Never place heavy items on top of the unit.

• Do not disassemble or reconstruct the unit.

• Do not spill water or other liquids into the unit.

10 10

OPEN CLOSE

POWER

/ I

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

OPTICAL

OUT

AC IN

LINE OUT

Amplifier or receiver (not included)

To household AC

outlet

(AC 120 V, 60 Hz)

Optical-fiber cable

(not included)

Receiver

(not included)

Remote control signal sensor

30˚30˚About 7 meters in

front of the signal

sensor

Transmission

window

R6, AA, UM-3

ID SCAN

CLEAR RECALL

REPEAT

SPIRAL

DISC SKIP

DISC

TIME MODE

SKIP

DISC 1

DISC 4

DISC 2 DISC 3

DISC 5

OPEN/

PROGRAM

MODE

RANDOM

MODE

This unit

CD or AUX terminals

OPTICAL

OUT

This unit

Dust-protection cap

Stereo connection cable (included)

White (L)

Red (R)

Before use

RQT5763

Front panel controls

Main unit

No. Name Ref.page

AStandby/on switch ( /I, POWER)..................... 6

Press to switch the unit from on to standby mode or vice versa.

In standby mode, the unit is still consuming a small amount of

power.

BSpiral button (SPIRAL) ...................................... 8

CRandom mode button (RANDOM MODE) ........ 8

DRepeat button (REPEAT) ................................ 12

ERemote control signal sensor .......................... 4

This changer can be operated by using the remote control pro-

vided with a Technics receiver.

(This may not be possible with some models.)

FDisplay

GNumeric buttons (1–10, 0, >10) ........................ 7

HSearch buttons ( , )............................... 10

ISkip buttons ( , ) .................................. 11

JID scan button (ID SCAN) ............................... 10

KTime mode button (TIME MODE).................... 12

LProgram mode button

(PROGRAM MODE)............................................ 9

MEdit guide button (EDIT GUIDE) ..................... 13

NDisc buttons (DISC 1–DISC 5) .......................... 6

ODisc skip button (DISC SKIP) ..................... 6, 11

PLoading drawer .................................................. 6

QStop button ( )................................................. 7

RPause button ( ) ............................................... 7

SPlay button ( ) ................................................. 7

TLoading drawer open/close button

( OPEN/CLOSE ) .............................................. 6

UDisc trays (1–5) .................................................. 6

Remote control

SL-PD9 only

Buttons 1, 2, 3, 4, 8, 9, 0, o, p, s, u, v, w and x

have the same functions as the corresponding buttons on the main

unit.

No. Name Ref.page

VNumeric buttons ................................................ 7

WClear button (CLEAR)..................................... 10

XDisc button (

DISC

) ............................................ 6

YRecall button (RECALL) ................................. 10

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

ID SCAN

CLEAR RECALL

REPEAT

SPIRAL

DISC SKIP

DISC

TIME MODE

SKIP

DISC 1

DISC 4

DISC 2 DISC 3

DISC 5

OPEN/

PROGRAM

MODE

RANDOM

MODE

Operations

RQT5763

Basic operations

This unit can play CD-DA format audio CD-R and CD-RW that

have been finalized* upon completion of recording.

It may not be able to play some CD-R or CD-RW due to the

condition of the recording.

*Finalizing is a process that enables CD-R/CD-RW players to play

audio CD-R and CD-RW.

Sequential play

All of the discs will be played, beginning from track 1 on the

selected disc.

The explanation below is an example of operation in the case

where all five disc trays in the changer are holding CDs.

1Press [ /I, POWER].

The unit will switch on.

2Press [ OPEN/CLOSE] to open the loading drawer.

3Load the disc(s) on the disc tray(s).

The discs can be loaded two at a time by pressing [DISC

SKIP] to rotate the carousel.

Note

•Do not load 3”(8 cm) and 5”(12 cm) discs on the same disc

tray.

•Do not use irregular shaped CDs. (See page 14.)

4Press [ OPEN/CLOSE] again to close the loading

drawer.

Note

Do not attempt to close the drawer by hand.

5Press the desired disc button ([DISC 1]–[DISC 5]).

Play will begin from the selected disc. If a disc is not on the

selected disc tray, the changer plays the disc at the next num-

ber.

SL-PD9 only

The disc indicator lights when there is a disc in the corre-

sponding tray.

For remote control

SL-PD9 only

Press [

DISC

] and then within 7 seconds or so, press

[DISC 1]–[DISC 5] to select the disc you want.

The changer plays all the tracks on all the discs in order and stops

automatically when the last track on the last disc finishes playing.

The first disc will then be at the playing position.

CAUTION

Do not touch the loading drawer and carousel while they

are in motion, and do not attempt to rotate the carousel by

hand; doing so could result in incorrect operation of the unit

and/or damage to the discs.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SEC

MIN

TRACK

DISC

Indicates that the loading drawer

is opened.

SEC

MIN

TRACK

DISC

Current play position (The numeral

illuminates with a red color.)

Illuminates when a disc is in the disc tray. If there

is no disc in the disc tray, the indication disappears

when the disc tray comes to the play position.

SEC

MIN

TRACK

DISC

Disc number in play

Track number in

play

Play indicator

Elapsed play time

Numbers of the trays in which

discs are loaded.

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

1524

Loading drawer

POWER

OPEN CLOSE

Disc tray Carousel Disc number

Label must face upward.

Disc indicator

DISC SKIP

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

SL-PD9

SL-PD7A

Operations

RQT5763

Basic operations

To directly access a desired track

Press the numeric button(s) to select the track.

To select a two-digit track number over 10

(or to select a two-digit track from the remote control for SL-PD9)

Press [>10] ([≥10] on the remote control for SL-PD9) and then the

two numbers you want within 7 seconds or so.

For example

Track no. 20: [>10] ([≥10] on the remote control for SL-PD9)

[2] [0]

To exchange discs during play

While playing a disc, it is possible to change the other discs without

interrupting play.

APress [ OPEN/CLOSE] to open the loading drawer.

BPress [DISC SKIP] to rotate the disc trays and exchange the

discs.

The carousel will move by one disc tray. Pressing again moves

the carousel in the opposite direction by two disc trays.

CPress [ OPEN/CLOSE] to close the loading drawer.

To temporarily stop play

Press [ ].

Press [ ] to resume play.

To stop play

Press [ ].

The display will show the total number of tracks and the total

playing time of the current disc.

The total playing time displayed includes the silent sections

between tracks. For this reason, it may be a few seconds longer

than the playing time indicated on the disc.

Press [ ] to re-start play.

Note

If you play a disc with the loading drawer open, discs other than

the current disc cannot be played.

CAUTION

Do not move this changer with a compact disc inside the unit. If

a disc comes off the disc tray, it might be scratched or the

changer might become incapable of playing.

(Refer to “Cautions concerning the moving of this unit” on page

14.)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . .

SEC

MIN

TRACK

DISC

SEC

MIN

TRACK

DISC

SEC

MIN

TRACK

DISC

SEC

MIN

TRACK

DISC

Track number

Current disc

Discs which can be changed.

Total number of tracks

Current disc Total playing time

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

10 10

OPEN CLOSE

SL-PD9

DISC SKIP

213

Numeric buttons

DISC SKIP

SL-PD7A

Operations

RQT5763

Random play

All of the tracks will be played one time each in random order.

There are two types of random play as described below.

One disc random play

The changer will play all tracks on the current disc in a random

order. Then it will choose a new disc randomly, excluding the discs

already played, and play all tracks on that disc in a random order.

In the stop or play mode

Press [RANDOM MODE] so that the “1 DISC RND” indi-

cator illuminates.

Every time you press the button:

1 DISC RND FULL RND (off)

Full random play

Each track to be played back is selected randomly from all of the

tracks on all of the discs, excluding the tracks that have already

been played.

In the stop or play mode

Press [RANDOM MODE] so that the “FULL RND” indica-

tor illuminates.

Every time you press the button:

1 DISC RND FULL RND (off)

The changer will stop automatically when all the tracks on all discs

have been played once.

To cancel random play mode

Press [ ].

The “1 DISC (or FULL) RND” indicator will go out.

Spiral play

The changer plays the first tracks on all the loaded discs in

sequence, followed by the second tracks on all the discs, and so

on.

In the stop or play mode

Press [SPIRAL].

Spiral play will begin with the first track on the disc situated at the

playing position.

The changer will stop automatically when all the tracks on all discs

have been played once.

For your reference

When a disc with fewer tracks finishes playing, that disc will be

skipped and the changer will continue playing the remaining track

on the other discs in spiral sequence.

To cancel spiral play mode

Press [SPIRAL] again.

The “SPIRAL” indicator will go out.

The changer will return to sequential play mode from the current

track on the current disc which is playing.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1DISC

SEC

MIN

TRACK

DISC

RND

SPIRAL

SEC

MIN

TRACK

DISC

FULL

SEC

MIN

TRACK

DISC

RND

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

RANDOM MODE

SPIRAL

DISC 1

DISC 2

DISC 3

DISC 5

DISC 4

Track

1Track

Track

Example: When starting from disc 1

Start

Spiral play

RANDOM MODE

SPIRAL

Track

Operations

RQT5763

Program play

This unit has two program play modes; program (PGM) and delete

(DEL).

Program mode allows you to select and play your favorite tracks in

the order you want to hear them.

Delete mode allows you to program the unit not to play certain

tracks. This mode can be used in combination with sequential and

random play.

Up to 32 tracks can be selected for each mode.

1While the unit is stopped

Select the mode with [PROGRAM MODE].

Every time you press the button:

PGM DEL (off)

2Press [DISC (1 to 5)] to select the required disc.

“AL” appears on the display to indicate all the tracks on the

disc are selected.

Repeat the above if you want to make selection by disc only.

The number of programmed items increases by one each time

a [DISC] button is pressed.

3Press the numeric button(s) to select a track.

To select a two-digit track number over 10

(or to select a two-digit track from the remote control for

SL-PD9)

Press [>10] ([≥10] on the remote control for SL-PD9) and then

the two numbers you want within 7 seconds or so.

For example

Track no. 20: [>10] ([≥10] on the remote control for SL-PD9)

[2] [0]

4Repeat steps

and

to complete the selection.

If a non-existing disc or track number is entered, the selection

is initially recorded but erased automatically during playback.

“-F” is displayed if you attempt to enter a 33rd item.

5Press [ ] to start play.

Additional selections can be made during play by repeating

steps

and

To use random play and delete mode together

After step

, make your random play mode selection (see page 8).

To cancel program play

While the unit is stopped

Press [PROGRAM MODE] to select “(off)” mode.

The contents of the program remain in the unit’s memory even after

the unit is turned off.

To use the program again

1. Press [PROGRAM MODE] to select the required mode.

2. Press [ ].

For your reference

The program remains in the memory for up to two weeks even if the

unit is disconnected from its power source.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PGM

SEC

MIN

TRACK

DISC

PGM

No.

TRACK

DISC

DEL

No.

TRACK

DISC

SEC

MIN

TRACK

DISC

PGM

No.

TRACK

DISC

Specified disc number

PGM

No.

TRACK

DISC

Specified track number

Program order

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

125

PROGRAM MODE

10 10

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

SL-PD9

SL-PD7A

Operations

RQT5763

Program play

SL-PD9 only

(Remote control only)

To confirm the selections

Press [RECALL].

Each time you press the button, the tracks and discs you

programmed appear on the display in the order they were selected.

To cancel selections

While the unit is stopped

Press [ ]. The entire program is canceled.

SL-PD9 only

(Remote control only)

To clear the last item in the program

Press [CLEAR].

To clear a specific item

1. Press [RECALL] until the item is displayed.

2. Press [CLEAR].

ID scan function

This function is convenient to use when searching for a desired

track.

The function will search from the beginning of the track for a loud

section, and will play 10 seconds of the track centering around that

point.

The order of scanning is the same as for play mode.

1Press [ID SCAN].

ID scan will start.

2When the desired track has been found:

Press [ ].

The changer will play the track from the beginning.

To cancel ID scan

Press [ID SCAN].

The “ID” indicator will go out.

The changer will continue to play from the track being played.

Search function

You can search rapidly forward or backward on the disc for specific

sections.

In the play or pause mode

Press and hold [ ] or [ ].

[]: You can search backward.

[]: You can search forward.

Release the button when you reach the desired point.

The changer will return to the previous mode (play or pause).

In sequential play mode

You can search forward over discs and backward within the current

disc.

In other play modes

You can search forward or backward only within the current track.

For your reference

The search function will begin slowly, and then, if the button is held

pressed for longer than 3 seconds, it will change to high-speed

search.

Searching in the play mode will decrease the sound level by 12 dB

(1/4).

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SEC

MIN

TRACK

DISC

PGM

No.

TRACK

DISC

Programmed track Programmed

order

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

ID SCAN

RECALL

CLEAR

ID SCAN

CLEAR RECALL

REPEAT

SPIRAL

DISC SKIP

DISC

TIME MO DE

SKIP

DISC 1

DISC 4

DISC 2 DISC 3

DISC 5

OPEN/

PROGRAM

MODE

RANDOM

MODE

10 10

OPEN CLOSE

DISC 5 DISC SKIP

CLEAR

RECALL

Operations

RQT5763

Skip function

To skip discs

Use this function to skip discs when selecting a disc to which you

wish to listen, and when loading and unloading the discs.

You can use this function in stop, sequential play, one disc random

play and delete play modes.

Press [DISC SKIP] to rotate the disc tray.

In stop mode

When the loading drawer is closed, pressing [DISC SKIP] changes

the disc tray to the next one.

When the loading drawer is open, pressing [DISC SKIP] moves the

carousel by two disc trays.

In play mode

When the loading drawer is closed, pressing [DISC SKIP] changes

the disc and the changer plays the track on the next disc.

If a disc is not on the selected disc tray, the changer plays the disc

at the next number.

When the loading drawer is open, pressing [DISC SKIP] moves the

carousel by one disc tray. Pressing again moves the carousel in the

opposite direction so that you can change all discs except the one

being played.

To skip tracks

Use this function to skip tracks when selecting a track to which you

wish to listen.

Press either [ ] or [ ] until you reach the desired

track.

[]: You can skip backward.

[ ]: You can skip forward.

In sequential/program /delete play mode

In sequential play mode, you can skip only within the current disc.

In program play mode, you can skip from one track to another in

the programmed sequence.

In delete play mode, you can skip tracks only within the current disc

excluding the tracks to be deleted.

[]: You can skip to the beginning of the track being played. If

you press this button again quickly, you can skip to the

beginning of the previous track.

Remember that in a backward skip, the current track is

included in the count.

[]: You can skip as many tracks as the number of times you

press the button.

In random play mode

[ ]: You can skip to the beginning of the current track.

[]: You can skip to the beginning of a next track in random

order.

In spiral play mode

[ ]: You can skip to the beginning of the current track.

[]: You can skip to the beginning of the track on the next disc.

You can also skip tracks when the changer is in the stop mode

(except during random play and spiral play) or pause mode.

SEC

MIN

TRACK

DISC

Disc number at the playing

position

SEC

MIN

TRACK

DISC

Track number at the playing position

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

DISC SKIP

SL-PD9

SL-PD7A

Operations

RQT5763

Repeat function

Play will continue endlessly in accordance with the specific play

mode selected.

Before or during play

Press [REPEAT].

In sequential play mode

All tracks of all discs will be played repeatedly.

In program play mode

The changer plays only the programmed selections in the

programmed sequence repeatedly.

In delete play mode

The changer plays the discs and tracks excluding the selections to

be deleted repeatedly.

In random play mode

When the changer has played all the tracks on all the loaded discs,

it will select a new random sequence and play continuously. The

sequence differs each time.

In spiral play mode

The changer plays all tracks of all discs repeatedly in the sequence

of spiral play.

To cancel repeat mode

Press [REPEAT] again.

The “ ” indicator will go out.

Time mode selection

The various time information of the current disc can be displayed.

In the play or pause mode

Press [TIME MODE].

The display changes in the order shown in the diagram.

In all play modes

When track number 21 or greater is playing, display C shows “---:--”.

A is displayed if play is stopped and then started again.

In program/delete/random/spiral mode

The displayed information will alternate between displays A and C

each time the button is pressed.

During operation of the edit guide function

The remaining play time on side A or side B will be shown in

display B, and the elapsed play time for side A or side B will be

shown in display D.

SEC

MIN

TRACK

DISC

SEC

MIN

TRACK

DISC

SEC

MIN

DISC

SEC

MIN

TRACK

DISC

SEC

MIN

DISC

Track number and elapsed play time of the

current track

Track number and remaining time of the

current track

Total remaining time on the disc

Total elapsed play time on the disc

REPEAT

TIME MODE

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

REPEAT

TIME MODE

Operations

RQT5763

Edit guide function

When recording, the changer will automatically program the

tracks for tape sides A and B in accordance with the length of

the tape so that none of the tracks will be interrupted before

they are completed.

In addition, the program will also include a silent interval of

approximately 4 seconds between tracks.

1Press [DISC SKIP] to select the disc to be recorded.

2Prepare the tape deck for recording.

Set the Dolby NR, reverse mode, recording level, etc., as in-

structed in the Operating Instructions for the tape deck.

Note

Rewind the tape so recording is possible from its beginning.

3Press [EDIT GUIDE] to select the tape length.

Each time you press the button, the display showing the tape

length changes as follows.

C-46 C-60 C-90 C---

Choose the length of the tape you will use.

More precise time settings are also possible.

(Refer to “To enter a desired recording time other than 46, 60

or 90 minutes” below.)

The data of the tracks to be recorded is displayed as shown in

the diagram.

In this example, disc 5 can be recorded with tracks 1-4 on side

A and tracks 5-7 on side B of the cassette tape.

4Start recording on the tape deck and then immediately:

Press [ ].

When the last track set for recording on side A is finished, the

changer will enter the pause mode. Set the tape to the position

from which recording will begin on side B, and then perform

step

once again.

When all the programmed tracks on the specified disc finish

playing, the changer will automatically stop. The edit guide

mode will be cancelled at the same time.

To enter a desired recording time other than 46, 60 or

90 minutes

1. Select “C---” in step

2. Enter the total recording time in minutes (1-99) using the

numeric buttons.

For example

To use 52-minute tape, press [5] then [2].

You can also specify the tape length by pressing [ ] or [ ]

buttons.

Press either [ ] or [ ] from each step C-46, C-60, C-90 or C---.

For example

To use 52-minute tape, select C-46 and then press and hold [ ]

until the display shows “52”.

The maximum allowable playing time for editing is 99 minutes.

To stop recording

Press [ ] and then press the stop button on the tape

deck.

Note

Depending on the disc, a little of the beginning of the next track

may be recorded onto the end of the track.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SEC

MIN

TRACK

DISC

TRACK

EDIT

SEC

MIN

EDIT

TRACK

EDIT

Specified disc number

Number of tracks

to be recorded Tracks to be

recorded

Remaining time on side A

Side A

Number of tracks

to be recorded Tracks to be

recorded

Side B

Remaining time on side B

SEC

MIN

EDIT

MIN

DISC

EDIT

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

EDIT GUIDE

Side A (30 min)

Side B (30 min)

Track 1 Track 2 Track 3 Track 4

Track 5 Track 6 Track 7

Silent interval between tracks

(approx. 4 seconds)

Example: Recording from a disc containing seven tracks

onto a 60-minute tape.

DISC SKIP

SL-PD9

DISC SKIP

SL-PD7A

Reference

RQT5763

Cautions concerning the moving

of this unit

CAUTION

Before moving the changer to another location, be sure to carry out

the “Preparations for moving the unit” described below.

Failure to do so will expose the compact discs and the changer to

the risk of severe damage.

Preparations for moving the unit

All of the discs must be removed so that the trays are completely

empty.

Use the following procedure.

APress [ /I, POWER] to switch off the unit.

BPress [ /I, POWER] to switch on the unit.

(If there is a disc in the play section, it will be returned to the disc

tray at this time.)

CPress [ OPEN/CLOSE] to open the loading drawer.

DPress [DISC SKIP] to rotate the disc trays and remove the discs

from all disc trays.

EPress [ OPEN/CLOSE] to close the loading drawer.

FPress [ /I, POWER] to switch off the unit.

If you have pressed a wrong button by mistake, return to step A.

Concerning CDs

With this changer, you can play CDs having this mark:

However, do not use irregular shaped CDs. CDs of the sort can

damage the unit.

~ Handling precautions

• If you are taking the CD from a cold to a warm environment, mois-

ture may form on the CD. Wipe this off with a soft, dry, lint-free

cloth before using the CD.

• Do not write on the label side with a ball-point pen or other writing

instrument.

• Do not use record cleaning sprays, benzine, thinner, static elec-

tricity prevention liquids or any other solvent.

• Do not attach labels or stickers to CDs. (Do not use CDs with ex-

posed adhesive from tape or left over peeled off stickers.)

• Do not use scratch-proof protectors or covers other than those

specified for use with this system.

• Do not use CDs printed with label printers available on the market.

Storage precautions

Be sure to store CDs in their cases to protect them from dust,

scratches, and warping.

Do not place or store CDs in the following places

• Locations exposed to direct sunlight

• Humid or dusty locations

• Locations directly exposed to a heat vent or heating appliance

• In the glove compartment or on the rear deck of an automobile

xxxxxxx

xxxxxx

xxxx

xxx

XXXXXXX

XXXXXXXX

XXXXXXXXX

XXXXX

XXXXXXX

XXXXX XXX

XXXXXXXXX

XXX

10 10

OPEN CLOSE

POWER

REPEATSPIRAL

RANDOM MODE

TIME MODE

EDIT GUIDE

ID SCAN

PROGRAM MODE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP

C E

Reference

RQT5763

Troubleshooting guide

Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or

a minor adjustment on your part may eliminate the problem and restore proper operation.

If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of

Authorized Service Centers (enclosed with this unit) to locate a convenient service center, or consult your dealer for instructions.

For detailed instructions, contact an authorized servicenter in the U.S.A. and Panasonic Canada Inc. Customer Care Centre in

Canada.

In the U.S.A., call 1-800-211-7262 or visit www.panasonic.com

In Canada, call 905-624-5505 or visit www.panasonic.ca

Reference pages are shown as black circled numbers. (e.g. 66

Changer does not play.

The disc in the changer does not

play.

Play stops before changing to the

next disc.

A certain music passage can’t be

played correctly.

There is noise from the tuner or

disturbance on the TV screen.

When program play is started, an

error message (-E) appears on the

display.

An error message (-E) appears on

the display, and the changer stops

operating.

The loading drawer stops in the

middle of opening.

SL-PD9 only

The changer does not respond

correctly to remote commands.

A disc(s) or other foreign object(s) has fallen

inside the changer.

Moisture has collected in the changer.

The disc is upside down.

The disc is dirty.

The disc is scratched.

The disc is warped.

The disc is not within specified standards.

The loading drawer is open.

The disc is dirty.

The disc is scratched.

Caused by high-frequency signals from this

changer.

Play was started without a track being

programmed.

The mechanism of the changer has been

improperly adjusted.

The batteries have run out.

There is an obstruction between the remote

control and the changer.

The batteries are inserted incorrectly.

The (+) and (–) polarities are reversed.

Open the loading drawer, and then remove the

object.

Allow the changer to dry out for about one hour

before using it.

Make sure the label is facing upward. 6

Wipe the disc with a soft cloth. r

Replace the disc with a new one.

Press the [ OPEN/CLOSE] button to close the

loading drawer.

Wipe the disc with a soft cloth. r

Replace the disc with a new one.

Use the changer further away from the tuner or TV.

If the tuner or TV’s antenna is the indoor type,

use an outdoor one.

Program a track. 9

Turn the unit off and then back on again.

However, if the loading drawer is fully open, take

out the compact disc(s) at the front position and

then turn the unit off and then back on again.

Replace batteries with new ones. 4

Remove the obstruction. 4

Reinsert batteries so that the polarities are

correct. 4

Maintenance

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a

soap-and-water solution or a weak detergent solution.

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using chemically treated cloth, read the instructions that

came with the cloth carefully.

Product Service

Do not attempt to remove the cover(s) or repair the unit yourself.

Refer servicing to qualified personnel only.

Product information

For product service, product information or assistance with product

operation, refer to the servicenter directory.

In the U.S.A., contact the Panasonic Customer Call Center at

1-800-211-7262, or e-mail consumerproducts@panasonic.com,

or web site (http://www.panasonic.com).

In Canada, contact Panasonic Canada Inc. Customer Care

Centre at 905-624-5505, web site (www.panasonic.ca), or an

authorized Servicentre closest to you.

Problem Suggested remedy

Probable cause(s)

RQT5763-2P

A1100TL2061

Panasonic Consumer Electronics

Company, Division of Matsushita

Electric Corporation of America

One Panasonic Way Secaucus,

New Jersey 07094

http://www.panasonic.com

Panasonic Sales Company,

Division of Matsushita Electric of

Puerto Rico, Inc. (“PSC”)

Ave. 65 de Infantería, Km. 9.5

San Gabriel Industrial Park, Carolina,

Puerto Rico 00985

Panasonic Canada Inc.

5770 Ambler Drive

Mississauga, Ontario

L4W 2T3

www.panasonic.ca

Printed in Singapore

Specifications

AUDIO

No. of channels 2 (left and right, stereo)

Frequency response 2–20000

Hz, ±1

Output voltage 2

V (at 0

dB)

Dynamic range 92

S/N 100

Total harmonic distortion 0.007% (1

kHz, 0

dB)

Wow and flutter Below measurable limit

DA converter MASH (1 bit)

Output impedance Approx. 1

kΩ

Load impedance More than 10

kΩ

PICKUP

Wavelength 780

GENERAL

Power supply AC 120

V, 60

Power consumption 9

Dimensions (WqHqD) 430I125I374

(1615/16”I429/32”I1423/32”)

Mass 4.5

kg (9.9

lb.)

Note

Specifications are subject to change without notice.

Mass and dimensions are approximate.

Power consumption in standby mode: 1

CAUTION:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and re-

ceiver.

•Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician

for help.

Any unauthorized changes or modifications to this

equipment would void the user’s authority to operate this

device.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

Technics Sl Pd9 Owner S Manual P1 3

SL-PD7A to the manual 2e93a7d2-7a22-44c5-befb-bb596d0a8e51

Navigation menu

Versions of this User Manual:

Views

Navigation