Technika Tbd4Ss 2 Users Manual ManualsLib Makes It Easy To Find Manuals Online!

: Technika Technika-Tbd4Ss-2-Users-Manual-121561 technika-tbd4ss-2-users-manual-121561 technika pdf

Open the PDF directly: View PDF .
Page Count: 6

Download
Open PDF In Browser	View PDF

3 year Warranty

Domestic Dishwasher
12-Place setting
TBD4SS-2
TBD4WH-2

Customer Care Centre: 1800 333 244

Code: 0120505120

Safety Is Very Important

Close-up View (Interior)
- Keep detergents out of the reach of children. Also keep children
away from the dishwasher when it is open to reduce the risk of injury.
- This appliance cannot be installed outdoors, not even if the
area in which it is installed is covered by a roof. It is also very
dangerous to leave it exposed to the rain and elements.
- Do not touch the heating element during or after a wash cycle.
- Do not lean or sit on the door when it is open, as this could
overturn the dishwasher.
- If the appliance malfunctions, turn off water supply to the appliance and disconnect the plug from the wall socket. Then, refer
to the "Troubleshooting". If you cannot resolve the problem,
contact an authorised service agent.
- Only specialised personnel are authorised to make repairs.
- Appliances which are being discarded must be made inoperable
by cutting the power supply cord and removing the door lock.
- The appliance must be positioned so that the plug or isolating
switch is accessible.
- If the supply cord is damaged, it must be replaced by the manufacturer or an authorised service agent.
- Children and infirm must be supervised at all times during use of
the dishwasher by an adult.

IMPORTANT
Carefully read the instructions contained in this manual, as it provides information that is essential to safe and proper installation,
use and maintenance of this appliance.
This appliance complies with following EEC directives:
-73/23/EEC of 19/02/73(Low Voltage)and subsequent
modifications;
- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and
subsequent modifications.
- Carefully dispose of the packing material.
- After removing the packing, check to make sure that the appliance is not damaged. If in doubt, contact a qualified professional.
- The dishwasher must only be used by adults for the washing of
household dishes and cooking utensils.
- Fundamental rules to follow when using the appliance:
* Never touch the dishwasher with wet hands;
* We discourage the use of extension cords and multiple sockets;
* During installation, the power supply cord must not be excessively or dangerously bent or flattened;

Warning:
Dishwasher Detergents can be extremely dangerous, if swallowed.
Avoid contact with skin and eyes and keep children away from the
dishwasher when the door is open.
Check that the detergent receptable is empty after completion of the
wash cycle.

* If the appliance is not operating properly or, requires
maintenance, disconnect the appliance from the power supply.

A
B
C
D

Close-up View (Control Panel)
A B C D

Upper Rack

E

Bottom Spray Arm

Rack Height Adjustor

F
G
H

Washing Filter

Top Spray Arm
Lower Rack

Detergent and Rinse Aid Dispenser
Third Sprayer

Technical Characteristics
Width

60 cm

Depth

60 cm
85 cm

Height

I

H
A
B
C
D
E

G

F

E
F
G
H
I

POWER Light
POWER Button
Water heating Indicator Light
Low Rinse Aid Indicator Light

12 standard place settings

Capacity
Mains water pressure

Handle For Opening Door

Power voltage

"Eco" Button

Total absorber power

300-650KPa
220-240V~ 50Hz
2200W

"Half Load" Button
"Fast" Button

Knob For Selecting Cycle

.1.

.2.




Detergent and Rinse Aid


== (Powder recommended only)

Loading the Dishwasher

Detergent (Powder recommended only)

Rinse Aid

Before placing the dishes in the dishwasher, remove the large food

Detergent specifically intended for use with dishwashers must

This product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the

particle to prevent the filter from becoming clogged, which results
in reduced performance.

door and should be filled after every 80 wash cycle (or when the
rinse aid indicator light comes on for models with this feature).

If the pots and pans have baked-on food that is extremely hard to
remove, we recommend that they be allowed to soak before they

Loading the Rinse Aid

are washed. This will eliminate the need for extra wash cycle.
Pull out the rack to facilitate loading the dishwasher.

be used. The dispenser must be refilled before the start of each
wash cycle following the instructions provided in the "Wash Cycle
Table." The detergent dispenser is located on the inside panel
the door.

Loading the detergent

To open the dispenser, turn the "C" cap in an anti-clockwise

To open the "A" cover on the dispenser, press the "B" button.

direction and then pour in the rinse aid, making sure not to overfill.
The amount of rinse aid used for each cycle can be regulated by

The detergent for the wash cycle should be poured into the "C"
compartment.
After the detergent has been placed in the dispenser, close the
cover and press down until it clicks in place.

B

turning the "F" dosage adjuster, located beneath the "C" cap,
with a screwdriver. There are 6 different settings; the normal
dosage setting is 3.

Lower Rack

Upper Rack

How to Use the Lower Rack
We recommend that you place the items which are the most difficult to clean items on the lower rack: pots, lids, serving dishes and
bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the sides of the

Load for 12 Standard Settings

racks in order to avoid blocking the rotation of the top spray arm.
- Pots, serving bowls, etc. must always be placed face down.

Important
Proper dosage of the rinse aid improves drying.
If drops of water remain on the dishes or spotting occurs, the
dosage adjuster should be turned to a higher setting.
If the dishes have white streaks, turn the dosage adjuster to a
lower setting.

- Deep pots should be slanted to allow the water to flow out.
- The silverware basket can be doubled (see fig.A) so that only
one section may be used when the silverware load is light. This
also makes space for additional pots and pans on the lower

1

rack.
- Silverware should be placed in the silverware basket with the

2

handles at the bottom; if the rack has side baskets, the spoons
should be located individually into the appropriate slots. Especially long utensils should be placed in the horizontal position at
the front of the upper rack.

C A

How to Use the Upper Rack

C

The upper rack is designed to hold more delicate and lighter
dishware, such as glasses, coffee and tea cups and saucers, as
well as plates, small bowls and shallow pans (as long as they are

NOTE: To facilitate closing the cover, remove any excess detergent on the edges of the dispenser.

not too dirty).
Position the dishes and cookware so that they do not get moved

F

.3.

by the spray of water.
The upper rack can be adjusted for height. (See fig.B)

.4.

3
4

fig.A

fig.B

Energy Saving Tips

Turning on the Appliance


Starting a wash cycle


Wait a few minutes before unloading the dishwasher to avoid

- Make sure that the plug for the appliance is inserted into the wall

handling the dishes and utensils while they are still hot and
more susceptible to breakage. They will also dry better.

socket.
- Make sure that the water supply is turned on to full pressure.

- It is important to try and run the dishwasher when it is fully

- Use the right amount of detergent: if you use too much detergent,
the result will not be cleaner dishes, but, rather, a greater negative impact on the environment.

loaded to save on energy. In order to prevent odors from forming and food from caking onto the dishes, you can run the prerinse cycle.
- Choose the right wash cycle: the choice of cycle depends on

- Load the dishwasher (see the section entitled, "Loading the
Dishwasher" on page 4).

the type of dishware, cookware and utensils being washed and
how dirty they are.

- Pour in the detergent (see the section entitled, "Detergent
and Rinse Aid" on page 3).
- Turn the knob located on the right of the control panel in
clockwise direction until the number or symbol for the cycle setting is aligned with the reference mark (see the section entitled,
"Wash Cycle Table" on page 7).
- Press the POWER button, and the POWER light will turn on. At
this point, the wash cycle will begin.



If you forget to load some of the dishes




Cancelling or modifying a wash cycle setting

A cycle that is underway can only be modified if it has been
running for a short time. Otherwise, the detergent may have al-

The wash cycle can be interrupted by pressing the POWER button.
You can then load additional dishes and turn the appliance back

ready been used, and the appliance may have already drained
the wash water. If this is the case, the detergent dispenser must

on. The cycle will start where it left off.

be refilled (see the paragraph entitled, "Loading the Detergent"
on page 3).



At the end of the wash cycle


Press the POWER button, and the ON light will turn off. Rotate
the knob in clockwise direction to the desired cycle setting (see

When the knob stops turning and is aligned with a STOP mark
(see figure), the cycle has finished. Turn off the appliance using

How to Keep Your Dishwasher in Shape

the section entitled: Starting a wash cycle
?F. Then, turn the
dishwasher back on using the POWER button.

the POWER button, turn off the water supply and open the door
of the dishwasher.

Wash Cycle Adjustment Buttons

After Every Wash

Moving the Appliance

After every wash, turn off the water supply to the appliance and
leave the door slightly ajar so that moisture and odors are not

If the appliance must be moved, try to keep it in the vertical position.
If absolutely necessary, it can be positioned on its back.

trapped inside.

Eco Button

It can be used before setting any of the wash cycles, except for
the intensive cycles (if included in the wash cycle table ). Please

This button (see "close-up View - Control Panel" on page 1, letter

keep in mind that the amount of detergent should also be cut in
half.

"G" ) is used for normal dirty dishes, pots and pans. It is a standard daily cycle. This button reduces the washing temperature

Remove the Plug

Seals

Before cleaning or performing maintenance, always remove the

One of the factors that cause odors to form in the dishwasher is

plug from the socket.

food that remains trapped in the seals. Periodic cleaning with a
sponge will prevent this from occurring.

No Solvents or Abrasive Cleaning Products
To clean the exterior and rubber parts of the dishwasher, do not
use solvents or abrasive cleaning products. Use only a cloth and

from 60
=to 50
I=saving energy costs.

Half Load Button
This button (see "close-up View - Control Panel" on page 1, letter "H" ) makes it possible to wash dishes using only the upper

Fast

warm soapy water.
To remove spots or stains from the surface of the interior, use a

This button (see "close-up View - Control Panel" on page 1, letter

cloth dampened with water and a little white vinegar, or a cleaning product made specifically for dishwasher.

"I" ) , when pressed with wash cycle 4 (glassware) make it possible to run the wash cycle at a lower temperatur (50
) and elimi-

rack if there are not enough dishes for a full load. This will allow
you to save on water and electricity.

When You Go on Holiday
When you go on holiday, it is recommended that you run a wash
cycle with the dishwasher empty and then remove the plug from
the socket, turn off the water supply and leave the door of the
appliance slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance.

nates the drying phase.

.5.

.6.

Wash Cycle Table (Powder recommended only)

Cycle

Eco
Button

Fast
Button

Cycle Selection
Information

Description of
Cycle

Cleaning and Special Maintenance
Detergent

Rinse
Aid

Pre-wash with cold water.

HEAVY

Very dirty dishes, pots and

Rinse with cold water.

pans (not to be used with

Extended wash at 60
K

30g




Rinse with hot waterK

delicate items).

HEAVY

30g




Rinse with cold water.
Dirty dishes pots and pans.

25g




Rinse with hot waterK

Normally dirty dishes pots and

NORMAL

Extended wash at 60
K




pans. Standard daily wash
with ECO button pressed.

RINSE

Drying.

The dishwasher must never be used without the filters. Improper
replacement of the filters may reduce performance of the appliance and damage dishes and utensils.
25g

Rinse with hot waterK




GLASSWARE

Rinse with hot waterK

rinsed and dried only.

Drying.

For dishes that need to be

Rinse with hot waterK

rinsed and dried only.

Drying.

used for items which are sen-




sitive to higher. Run immediately after dishes are used.

B

Troubleshooting







.
Wash at 50

Hot RinseKK

15g

Drying.







used for items which are sensitive to higher. Run imme-

Wash at 50
K
Rinse with cold water.

diately after dishes are used.
Pre-wash of dishes, pots and

PRE-RINSE




first: Have you forgotten to press one of the buttons or to perform an essential operation?

Short cold wash to pre-

Have you checked whether:
- the water is turned on and the hose is connected properly;
- the water supply to the house is on and has sufficient pressure;
- the water supply hose is crimped or bent;
- the filter for the water supply hose is clogged.

Have you checked whether:

The Dishwasher Does Not Drain

- the plug is pushed into the socket correctly;
- the power is on in the house;

Have you checked whether:

- the door is closed properly;
- the POWER switch is on "ON";

Lime Deposits or a White Film Form on the Dishes

15g

- the drain hose is crimped or bent.

Have you checked whether:
- the rinse aid dosage is correct.

The Dishwasher Does Not Load Water

If, despite all these checks, the dishwasher still does not function
and/or the problem persists, contact the nearest authorised service

Have you checked whether:
- the water is turned on and the hose is connected properly;

agent and provide them with the following information:
- the nature of the problem;
- the model type number (Mod...) and the serial number (S/N...),
which are indicated on the plate located on the side of the inner

pans while waiting for the

vent food residue from

- the water supply to the houses on and has sufficient pressure;
- the water supply hose is crimped or bent;

load to be completed after

drying on the dishes K

- the filter for the water supply hose is clogged.

the subsequent meal.

The Dishes Are Not Clean

The Dishwasher Does Not Start

- the water supply is turned on.

Economic, fast cycle to be

GLASSWARE

A

Drying.

For dishes that need to be

Economic, fast cycle to be

on page 2, letters C-E ). Check the sprayer arms periodically and
clean them when needed.




It may occur that the dishwasher does not function properly or at
all. Before calling for assistance, Iet us see what can be done

RINSE

It may happen that food particles become encrusted on the
sprayer arms and block the hole (see "Close up view [interior]"

bly in the dishwasher, positioning in its seat and pressing
downward.

Rinse with cold water.
Extended wash at 50
K

Cleaning the Spray Arms

bly (made up of the "A" semicircular filter and the "B" fine filter)
should be cleaned at least once a month. To clean the filter and
the fine filter, use a cleaning brush. Then, reassemble the filter
parts as shown in the figures below and inset the entire assem-

Drying.

NORMAL

The filter efficiently removes food particles from the wash water,
allowing it to be recirculated during the cycle. For this reason, it

and cup under running water. To remove the filter assembly, pull
on the cup handle in an upward direction. The entire filter assem-

Pre-wash with cold water.
Very dirty dishes, pots and Rinse with cold waterK
pans. (not to be used with Extended wash at 50
K
Rinse with hot waterK
delicate items)

For best performance and results, the filter assembly must be
cleaned.

is a good idea to remove the larger food particles trapped in the
filter after each wash cycle by rinsing the "A" semi-circular filter

Drying.




Filter Assembly

part of the door.

Never call on unauthorised technicians and refuse to allow parts to be installed that are not original spare parts.

.7.

.8.

Installation

Installation
Positioning the Appliance

Anti-Flooding Protection

Position the appliance in the desired location. The back should

The dishwasher is equipped with a system that stops the supply of
water in the event of a problem with the water supply hose, or

rest against the wall behind it, and the sides, along the adjacent
cabinets or wall. The dishwasher is equipped with water supply

leaks within the unit, in order to prevent damage to your home.

and drain hoses that can be positioned to the right or the left to
ensure correct installation.

Levelling the Appliance
Once the appliance is positioned, adjust the feet (screwing them
in or out) to adjust the dishwasher, making it level. The appliance
should not be inclined more than 2
. If the appliance is level, it
will help ensure proper performance.

Cold Water Connection
fig.1

Connect the cold water supply hose to a threaded 3/4 (gas) connector and make sure that it is fastened tightly in place (see fig.1).
If the water pipes are new or have not been used for an extended
period of time, let the water run to make sure that the water is
clear and free of impurities. If this precaution is not taken, there
is a risk that the water inlet can get blocked and damage the
appliance.
650KPa Pressure limiting Valve is required.

Diagram

Installation
Drain Hose Connection

Attention:

Insert the drain hose into a drain pipe with a minimum diameter

The special plastic hose support must be solidly fastened to the
wall to prevent the drain hose from moving and allowing water to

of 4cm, or let it run into the sink, making sure to avoid bending
or crimping it. Use the special plastic support that comes with

spill outside the drain.

the appliance (see fig.2). The free end of the hose must be at a
height between 40 and 100 cm and must not be immersed in

Electrical Connection
After making sure that the voltage and frequency values for the
current in the home correspond to those on the rating plate

water.

(located on the stainless steel inner door of the appliance) and
that the electrical system is sized for the maximum voltage on
the rating plate, insert the plug into an electrical socket which
is earthed properly (the earthing of the appliance is a safety
requirement mandated by law).
If the electrical socket to which the appliance must be connected
is not appropriate for the plug, replace the plug, rather than
using adaptors or the like as they could cause overheating and
burns.

fig.2

.9.

.10.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Provided By MANUALSLIB.COM - http://www.manualslib.com/
Create Date                     : 2012:06:15 06:43:36Z
Keywords                        : manuals, instruction manuals, user manuals, service manuals, user guides, pdf manuals, owners manuals, installation guides
Modify Date                     : 2014:12:07 13:50:48+08:00
Subject                         : Search through 700.000 manuals online & and download pdf manuals.
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Provided By MANUALSLIB.COM - http://www.manualslib.com/
Description                     : Search through 700.000 manuals online & and download pdf manuals.
Title                           : ManualsLib - Makes it easy to find manuals online!
Creator Tool                    : pdftk 1.44 - www.pdftk.com
Metadata Date                   : 2014:12:07 13:50:48+08:00
Producer                        : itext-paulo-155 (itextpdf.sf.net-lowagie.com)
Document ID                     : uuid:2a9a49f7-40e5-554d-b403-5a5255b1e054
Instance ID                     : uuid:5bdd46b5-a155-c049-a701-8831a44902a1
Page Count                      : 6

EXIF Metadata provided by EXIF.tools