Technology Solutions 1116 UHF RFID Reader User Manual
Technology Solutions (UK) Ltd UHF RFID Reader
User's Manual
User Manual Technology Solutions UK Ltd Suite C Loughborough Technology Centre Epinal Way Loughborough Leicestershire LE11 3GE UNITED KINGDOM Tel: +44 (0) 1509 238248 Fax: +44 (0) 1509 220020 Email: enquiries@tsl.uk.com User Manual 1116 Contents 1. Connections .................................................................................................................................... 3 1.1. Connection locations ....................................................................................................................... 3 1.2. Data and power connector details .................................................................................................. 4 1.3. Antenna connector details ............................................................................................................... 4 2. Installation ....................................................................................................................................... 5 3. Regulatory information .................................................................................................................... 5 3.1. Labelling requirements .................................................................................................................... 5 3.2. Information to the user - FCC.......................................................................................................... 5 3.3. Information to the user - IC ............................................................................................................. 6 3.4. RF exposure .................................................................................................................................... 6 History Version Date 1.0 23 July 2010 1.1 5 August 2010 rd th Modifications Approved By Date First version DAC 23 July 2010 FCC ID changed. DAC August 2010 DAC 18 August 2010 Additional added. 1.2 th 17 August 2010 FCC text Add IC ID. Add details of approved antenna. Sign rd th th Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time without notice. Technology Solutions (UK) Limited provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of any customer’s products. Therefore, Technology Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance provided by Technology Solutions (UK) Limited. No part of this document may be reproduced in any form without the written consent of the author. Page 2 of 7 www.tsl.uk.com User Manual V1.2.pdf User Manual 1116 1. Connections 1.1. Connection locations Pin 1 Data and power Antenna Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time without notice. Technology Solutions (UK) Limited provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of any customer’s products. Therefore, Technology Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance provided by Technology Solutions (UK) Limited. No part of this document may be reproduced in any form without the written consent of the author. Page 3 of 7 www.tsl.uk.com User Manual V1.2.pdf User Manual 1.2. 1116 Data and power connector details The data and power connector is an 8 way Molex 52745 series (0.5mm pitch, top contact) FFC-FPC connector. A Molex 98266-007x / 21020-07x cable should be used with this connector. Pin Function 5V ±5% DC supply. Average operating current 800mA, peak operating current 1.5A. Connect to both pins 5V ±5% DC supply. Average operating current 800mA, peak operating current 1.5A. Connect to both pins GPIO2 GPIO3 Serial data from reader to host. 3V3 logic levels. Serial data from host to reader. 3V3 logic levels. Data and power common. Connect to both pins. Data and power common. Connect to both pins. 1.3. Antenna connector details The antenna connector is a Hirose U.FL receptacle. The antenna characteristics have a significant effect on overall reader performance. A 50Ω antenna with return loss better than 10dB over the operating frequency range should be used. The only antenna currently approved for use with the 1116-01-UHF reader is the 1095FCC circularly polarised patch antenna available from Technology Solutions (UK) Ltd. Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time without notice. Technology Solutions (UK) Limited provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of any customer’s products. Therefore, Technology Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance provided by Technology Solutions (UK) Limited. No part of this document may be reproduced in any form without the written consent of the author. Page 4 of 7 www.tsl.uk.com User Manual V1.2.pdf User Manual 1116 2. Installation The reader should be secured using three M2 pan head screws of a suitable length. The mounting holes are connected to pins 7 and 8 (common). If the reader is to be operated continuously at high ambient temperatures it is recommended that the mounting surface for the reader provides additional heatsinking. 3. Regulatory information 3.1. Labelling requirements If the module label is not visible when the module is installed in the final product then the final product label must contain the text: “Contains FCC ID: S6J-1116 IC ID: 8948A-1116” 3.2. Information to the user - FCC This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time without notice. Technology Solutions (UK) Limited provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of any customer’s products. Therefore, Technology Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance provided by Technology Solutions (UK) Limited. No part of this document may be reproduced in any form without the written consent of the author. Page 5 of 7 www.tsl.uk.com User Manual V1.2.pdf User Manual 1116 Consult the dealer or an experienced radio/TV technician for help. 3.3. Information to the user - IC This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. 3.4. RF exposure This RFID reader module is a spread spectrum transmitter operating under 47 CFR §15.247. The low operating power ensures a high likelihood of compliance with the RF exposure standards. In the final product antenna should be located so that the direction of maximum radiation is away from the user. In addition it is recommended that the user manual for the final product incorporating the RFID reader module indicates where the antenna is located. Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time without notice. Technology Solutions (UK) Limited provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of any customer’s products. Therefore, Technology Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance provided by Technology Solutions (UK) Limited. No part of this document may be reproduced in any form without the written consent of the author. Page 6 of 7 www.tsl.uk.com User Manual V1.2.pdf User Manual 1116 Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time without notice. Technology Solutions (UK) Limited provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of any customer’s products. Therefore, Technology Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance provided by Technology Solutions (UK) Limited. No part of this document may be reproduced in any form without the written consent of the author. Page 7 of 7 www.tsl.uk.com User Manual V1.2.pdf
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : David Corder Create Date : 2010:08:19 12:10:04Z Modify Date : 2010:08:19 13:28:04-07:00 Language : en-GB Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : David Corder Title : User Manual Creator Tool : Microsoft® Office Word 2007 Metadata Date : 2010:08:19 13:28:04-07:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:4df764c7-4a9c-4002-af26-76eb3fd68bdb Instance ID : uuid:def281c7-cc69-4137-96db-cc13dbdcb438 Page Count : 7EXIF Metadata provided by EXIF.tools