Tecom Co BT3061 Bluetooth Headset User Manual BT3061

Tecom Co Ltd Bluetooth Headset BT3061

User Manual

Bluetooth Headset User Manual1. Getting StartedCharge the headset using the adapter. It takes 2 to 2.5 hours to fully recharge thebattery2. PairingPress and hold the ON/OFF button until you hear two short low tones.The headset indicator light flashes green and red, indicating the pairing mode ison.The default ID Code is “1111”.3. Turn the headset onPress and hold the ON/OFF button until you hear a short tone.The headset indicator light flashes green, indicating the pairing mode is on. If thebattery is low, the light flashes red.4. Turn the headset off Press and hold the button key until you hear a short low tone following a shorthigh tone. The headset indicator light is switched off.5. Adjusting the volumeTo increase the volume, press the “+” buttonTo decrease the volume, press the “-“ button6. Making a callEnter the number on the mobile keypad.When the call has been set up, the voice will be transferred to headset.End the call by pressing the ON/OFF button.7. Answering callsWhen the headset rings, press the ON/OFF button.End the call by pressing the ON/OFF button.THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFULINTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.Notice: The changes or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.

Navigation menu