Tecom Co BT3061A Bluetooth Headset User Manual

Tecom Co Ltd Bluetooth Headset

User Manual

Bluetooth Headset User Manual (BT3061a) 1. Getting Started Charge the headset using the adapter. It takes 2 to 2.5 hours to fully recharge the battery 2. Pairing Press and hold the ON/OFF button until you hear two short low tones. The headset indicator light flashes green and red, indicating the pairing mode is on. The default ID Code is “1111”. 3. Turn the headset on Press and hold the ON/OFF button until you hear a short tone. The headset indicator light flashes green, indicating the pairing mode is on. If the battery is low, the light flashes red. 4. Turn the headset off Press and hold the button key until you hear a short low tone following a short high tone. The headset indicator light is switched off. 5. Adjusting the volume To increase the volume, press the “+” button To decrease the volume, press the “-“ button 6. Making a call Enter the number on the mobile keypad. When the call has been set up, the voice will be transferred to headset. End the call by pressing the ON/OFF button. 7. Answering calls When the headset rings, press the ON/OFF button. End the call by pressing the ON/OFF button.
FCC Caution This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

Navigation menu