Tecom Co FPA16242T 3G Small Cell User Manual

Tecom Co Ltd 3G Small Cell

User Manual

  QUICK START GUIDE  1. WHAT IS IN THE BOX           2. CHOOSING THE BEST LOCATION  Before installing, think about where you want to put your new Femtocell. The ideal location is somewhere central, away from windows – this will allow the Femtocell to give the best coverage possible.                 Femtocell with optional wall fixings (where included) Data cable to connect the Femtocell to your broadband router or cable modem Mains power supply adaptor and plug
 3. HOW TO INSTALL YOUR FEMTOCELL  STEP 1 – Insert the SIM Card  Insert the SIM card provided by your Network Operator with the Femtocell. The SIM card will not lock in place if it is inserted incorrectly – please take care not to force the SIM card in to the slot.                 STEP 2 – Connect the network cable  Connect one end to the Femtocell and the other end to your broadband router or cable modem.   STEP 3 – Connect the power adaptor and then switch on at the mains   STEP 4 – Wait 10 minutes for the Femtocell to be ready to use  The green Service light will stop flashing and become solid green when the Femtocell is ready to use
 4. IN THE EVENT OF A PROBLEM  If the red Status light is on then that means there is a problem with the device. If the red Status light is not flashing then please contact customer care who will help you with the problem.   If the red Status light is flashing this means there is a problem which you can resolve yourself. The number of flashes indicates the type of problem as shown below:   # of Flash  Problem  Recommended action 1  No connection to local broadband router  Check the connection between the broadband router and the Femtocell.  2  No internet connection  Check that the broadband router is connected to the Internet and is providing service. 3  Interference problem  There is interface with other systems. Try placing the Femtocell in a different place. If this persists please contact customer services. 4  Overheating  Check the Femtocell is located where there is good airflow.  5  SIM card problem  Check to see that the SIM card is the one provided with the Femtocell and that it has been inserted correctly. If it is please contact customer services.   5. PRODUCT CARE & USAGE  All instructions, warning and caution statements that accompany this equipment must be strictly followed at all times to ensure its safe use. Observe all warning and caution symbols that are fixed to this equipment. Do not cover the device or block the airflow to the device with any other objects To be in compliance with regulations, the user must use the cables supplied with the unit and install them properly. This includes the power adapter that is provided. Operate this product only with the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local electricity company.  Do not use this product near water, for example a swimming pool or a bathroom. Keep the device away from excessive heat and humidity and keep the device free from vibration and dust.
Federal Communication Commission Interference Statement  This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: -  Reorient or relocate the receiving antenna, if applicable. -  Increase the separation between the equipment and receiver. -  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -  Consult the service provider or an experienced radio/television technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the FCC and is intended to supply you with information regarding the FCC approval of this device.  Declaration of Conformity  This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:  Description:   3G Small Cell Model:     FPA16242T FCC ID :              D6XFPA16242T IC NO.:                3187A-FPA16242T The device may not cause harmful interference. The device must accept any interference received, including interference that may cause undesired operation.  Canada EMI Regulation This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada. This device complies with RSS-132 and RSS-133 of the Industry Canada Rules. Operation is subject to the following two conditions: -  This device may not cause harmful interference. -  This device must accept any interference received, including interference that may cause undesired operation.  Radiation Exposure Statement This device complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment under the following conditions: This device should be installed and operated such that a minimum separation distance of 8 inches (20 cm) is maintained between the radiator (antenna) and the user’s or nearby person’s body at all times. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. For more information, visit the FCC website at http://www.fcc.gov  Disclaimer  NEC assumes no responsibility for errors or omissions that may appear in this guide. We reserve the right to change this guide at any time without notice.

Navigation menu