Tele Radio C1010A Transmitter User Manual ONFC1010A 4807A C1010A Rev1
Tele Radio AB Transmitter ONFC1010A 4807A C1010A Rev1
ONFC1010A & 4807A-C1010A User manual Rev1
Tele Radio Panther SAFETY INSTRUCTIONS Standard settings LANGUAGE: ENGLISH (ORIGINAL) ARTICLE CODE: PN-R8-1, PN-T7-2 CE-IM-PN-RX002-A01-EN Thank you for purchasing a Tele Radio product PN-R8-1, PN-T7-2 READ ALL INSTRUCTIONS CAREFULLY BEFORE MOUNTING, INSTALLING AND CONFIGURATING THE PRODUCT. These instructions are published by Tele Radio AB without any guarantee. These instructions are solely directed towards qualified installers. The instructions may be removed or revised by Tele radio AB at any time and without any further notice. Corrections and additions will be added to the updated versions of the instructions. The instructions that contain information on the installation and configuration of the remote radio control unit on the machine are not intended to be passed on to the end user. Only such information may be passed on to the end user, that is needed to operate the machine correctly by radio remote control. Tele Radio AB products are covered by a guarantee against material, construction or manufacturing faults. During the guarantee period, Tele Radio AB may replace the product or faulty parts with new. Work under guarantee must be carried out by Tele Radio AB or by an authorized service centre specified by Tele Radio AB. Make sure that repairs and maintenance are only carried out by qualified personnel. Use only spare parts from Tele Radio AB. Contact your Tele Radio representative if you need service or support. The EC declaration of conformity can be downloaded from our website. ©Tele Radio AB, 2011 TELE RADIO AB Datavägen 21, SE-436 32 Askim. Sweden Tel: +46-31-748 54 60 Fax: +46-31-68 54 64 www.tele-radio.com 2150 TECHNICAL DATA RECEIVER R8-1 (BASE BOARD) 7 8 9 10 11 12 13 LEDs 5 1 2 3 4 LED6 18 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 20 Relay 5 Relay 1 Relay 2 Relay 3 Relay 4 LED7 LED8 LED9 Relay 1- on/off relay Relay 5- work relay Relay 2 Relay 3- kill relay Relay 4- buzzer relay Power supply connection 6-30 V DC Relay LED 5 Relay LED 1 Relay LED 2 Relay LED 3 Relay LED 4 NC CO NO NC CO 3 (kill) NO 17 NO 16 CO 15 NC 14 NO 1 (on/off) 13 CO 11 NC 12 NO WR/5 CO 10 12-24 V DC LED10 19 NC 4 (Buzzer) 14 15 16 17 18 19 20 12. Power supply LED 6 13. Trabus programming connector 14. Terminal block for RS232 15. Function button (Cancel) 16. Select button (OK) 17. LED 8 18. LED 9 19. LED 10 20. LED 7 Current consumption RECEIVER MODEL SUPPLY VOLTAGE MAX. CURRENT CONSUMPTION R8-1 12-24 V DC <200 mA. Technical data FUNCTIONAL RELAYS: NUMBER OF CHANNELS: SIZE: WEIGHT: IP CLASS: FREQUENCY: 5 potential free* functional relays NO/NC 8A ACI 16 120 x 116 x 50 mm./ 4.7” x 4.6” x 2” 400 grams/ 14 oz. IP66 2405-2480 MHz. * Potential free means that you need to supply voltage to get power out of a relay (e.g. via a connection comb). SYSTEM APPLICATION AREA The Panther system is a simplex radio communication system that is preferentially aimed towards professional industry, e.g. radio controlling of winches and mobile applications. The functionality of the Panther systems is as varied and versatile as are the needs of our customers. LED INDICATIONS LED INDICATIONS DURING START UP 1. All receiver LEDs lit up for 0.5 sec. to show that they are working. 2. Current settings are shown for 2 sec. On relay LEDs 1-4: Relay LED 1 Relay LED 2 Relay LED 3 Relay LED 4 OFF Continuous transmitting mode ON Discontinuous transmitting mode OFF Custom ID not enabled ON Custom ID enabled OFF Configuration ID not enabled ON Configuration ID enabled OFF Frequency scan on ON Frequency scan off (fixed frequency) On LED 7, 8 and 9: LED 7 ON Operating mode 1 (direct mode) LED 8 ON Operating mode 2 (lifting mode) LED 9 ON Operating mode 3 (LML mode) LED INDICATIONS IN PROGRAMMING MODE LED 7 red ON LED 8 yellow ON LED 9 green ON LED 10 orange ON LED INDICATIONS DURING OPERATION LED 6 red LED 7 red ON Power to the receiver is on OFF Power to the receiver is off OFF No transmitter registered flashes (slow) At least one transmitter is registered and one transmitter is logged in, but not transmitting. flashes (quick) At least one transmitter is registered, but not transmitting. ON Valid radio packages from a registered transmitter received. ERROR INDICATIONS ON LEDS LED 7 (red) LED 8 (yellow) ON Reading of production data failed. Contact your representative. LED 7 (red) ON Radio module startup failed. Contact your representative. LED 8 ON A radio package not coming from a Panther transmitter is received. LED 8 LED 9 ON A radio package from a transmitter in a different mode (discontinuous or continuous) than the receiver is received. LED 8 LED 10 ON A radio package is received from a transmitter that is not registered. LED 9 ON A radio package is received, but the radio signal strength (RSSI) is too low. LED 10 ON A radio package is received, but the configuration ID is not accepted. TECHNICAL DATA TRANSMITTER 8-BUTTONS TRANSMITTER T7-2 3 4 1. 2. 3. 4. 5. 6. 7. Rubber cover STOP button red LED 1 yellow LED red LED 2 red LED 3 red LED 4 STOP BUTTON TEST IMPORTANT! We recommend that the functionality of the STOP button is being tested at a regular basis: At a minimum, when used for 200 hours. Test the STOP button by pressing and pulling it out. Frequency: 2405-2480 MHz. Technical data T7-2 transmitter NUMBER OF BUTTONS BATTERIES DEGREE OF PROTECTION NUMBER OF CHANNELS SIZE WEIGHT FREQUENCY 8 x 2-step pushbuttons 3 x 1.5V AA exchangeable IP65 16 7.3 cm. x 17.8 cm./2.9 x 7 in. (excl. rubber cover) 250 g./ 0.55 lbs. (excl. rubber cover, incl. batteries) 2405-2480 MHz. Install batteries 1. 2. 3. Remove the battery cover (2 screws). Put the batteries (3 x 1.5V AA batteries) in. Put back the battery cover (2 screws). For optimum performance, use alkaline batteries. 3 x 1.5V AA The rubber cover The transmitter comes with a removable rubber cover that helps prevent the transmitter from bumps, dirt and dust. The rubber cover can be removed and wiped off. Remove the rubber cover 1. Loosen the rubber cover, starting at the top. 2. Lift the transmitter up out of the rubber cover. Replace the rubber cover 1. Place the transmitter in the rubber cover, starting at the bottom. 2. Put the rubber cover back on the transmitter. STANDARD SETTINGS DEFAULT STATE • • discontinuous radiotransmission no on/off function The system will start transmitting as soon as the batteries are inserted, the stop button is pulled out and a transmitter button is pressed. Radio transmission will end when no transmitter button is being pressed. START THE TRANSMITTER 1. Pull out the stop button. The transmitter transmits when a transmitter button is pressed. TURN THE TRANSMITTER OFF 1. Press the stop button. NOTE! When the transmitter is active and the stop button is pressed, all relays go off. REGISTER THE TRANSMITTER IN THE RECEIVER 1-8 transmitters can be registered in the receiver. 1. 2. 3. 10 Press the receiver Function button until red LED 7 lights up. Press the receiver Select button until LEDs 1-5 light. Press transmitter button 1, 1 step down, until LEDs 1-10 flash 3 times before going out. ERASE ALL TRANSMITTERS FROM THE RECEIVER 1. 2. Press the Function button until LED 7 lights. Press the Select button until red LED 1-5 light. Keep pressed until LED 7 and the relay LEDs 1-5 go out. NOTE! If red LED 7 flashes slowly, one or several transmitters are still registered in the receiver. RELAY SETTINGS FOR OPERATING MODE 1 Transmitter button 1 Transmitter button 2 Transmitter button 3 Transmitter button 4 Transmitter button 5 (1st + 2nd step) activates relay 1 (1st + 2nd step) activates relay 2 (1st + 2nd step) activates relay 3 (1st + 2nd step) activates relay 4 (1st + 2nd step) activates relay 5 11 FCC IC INFORMATION The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Toute modification apportée à cet appareil qui ne serait pas approuvée expressément par (applicant name) peut invalider l’habilitation de l’utilisateur à utiliser l’appareil. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. L’appareil est conforme à la réglementation FCC, section 15 et Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise à deux conditions : (1) L’appareil ne doit pas provoquer d’interférences nuisibles, et (2) L’appareil doit supporter les interférences reçues, y compris les interférences empêchant son fonctionnement correct. 12 TRANSMITTER LABEL PLACEMENT 2150 SN: XXXX FCC ID: ONFC1010A Pb IC: 4807A-C1010A Model No.: T00007-02 Model: T00007-02 eq.:2405-2480MHz Freq.:2405-2408MHz www.tele-radio.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interfe ence received, including interference that may cause undesired operation. 1. 2. IC ID label CE label 3. 4. FCC ID label FCC information label 13 BATTERY PRECAUTIONS Observe the following general battery warnings. • As batteries contains flammable substances such as lithium or other organic solvents, they may cause heating, rupture or ignition. • Risk of explosion if battery is replaced with a battery of an incorrect type. • Do not short circuit, disassemble, deform or heat batteries. • Never try to charge a visibly damaged or frozen battery. • Keep batteries out of reach of small children. Should a child swallow a battery, consult a physician immediately. • Avoid direct soldering to batteries. • When discarding batteries, insulate the + and - terminals of batteries with insulating/ masking tape. Do not put multiple batteries in the same plastic bag. • When improperly disposed, lithium batteries may short circuit, causing them to become hot, burst or ignite. • Store in a cool location. Keep batteries away from direct sunlight, high temperature, and high humidity. • Do not throw batteries into fire. DISPOSAL OF BATTERIES AND ELECTRONICS Improperly disposed electronics may harm public health and the environment. Batteries and electronic waste may contain toxic heavy metals. If thrown away in the trash, the toxic compounds can leach into soil and water, pollute lakes and streams, making them unfit for drinking, swimming, fishing, and wildlife. Contact your local government’s recycling or solid waste department for more information on proper disposal of electronics in your region. 14 ROHS AND WEEE In accordance with Directive 2002/95/EC on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and Directive 2002/96/ EC on waste electrical and electronic equipment (WEEE), Tele Radio strives to minimize the use of hazardous materials, promotes reuse and recycling, and reduces emissions to air, soil and water. When a commercially viable alternative is available, Tele Radio strives to restrict or eliminate substances and materials that pose an environmental, health or safety risk. GUARANTEE, SERVICE, REPAIRS AND MAINTENANCE The Tele Radio products are covered by a guarantee against material, construction and manufacturing faults. During the guarantee period, Tele Radio may replace the product or faulty parts. Work under guarantee must be carried out by Tele Radio or by an authorized service centre specified by Tele Radio. This is not covered by the guarantee: Faults resulting from normal wear and tear. Parts of a consumable nature. Products that have been subject to unauthorized modifications. Faults resulting from incorrect installation and use. Damp and water damage. Repairs and maintenance must be carried out by qualified personnel. Use spare parts from Tele Radio only. Contact your representative or Helpdesk if you require service or other assistance. Keep the product in a dry, clean place. Keep contacts and antennas clean. Wipe off dust using a slightly damp, clean cloth. Never use cleaning solutions or high-pressure water. 15 TELE RADIO AB Sweden, Main office Tel. +46 (0)31-748 54 60 e-mail: info@tele-radio.com www.tele-radio.com TELE RADIO SVERIGE Sweden Tel. +46 (0)31-724 98 00 e-mail: sverige@tele-radio.com TELE RADIO GmbH Germany Tel. +49 (0)94 51-944 8 550 e-mail: deutschland@tele-radio.com TELE RADIO ASIA China Tel. +86-(0)592-3111168 e-mail: china@tele-radio.com TELE RADIO TURKEY Turkey Tel. +90 216 574 22 94 e-mail: turkiye@tele-radio.com TELE RADIO LTD England Tel. +44 (0) 1625 509125 e-mail: england@tele-radio.com TELE RADIO LLC North America & Latin America Tel. +1 (305) 459 0763 e-mail: america@tele-radio.com TELE RADIO BV Benelux Tel. +31-(0)70-419 41 20 e-mail: benelux@tele-radio.com TELE RADIO AS Norway Tel. +47-6933 4900 e-mail: norge@tele-radio.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Print high-res Tagged PDF : Yes XMP Toolkit : 3.1-701 Create Date : 2011:06:30 13:52:48+02:00 Metadata Date : 2011:07:21 18:21:35+08:00 Modify Date : 2011:07:21 18:21:35+08:00 Creator Tool : Adobe InDesign CS4 (6.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 9553 bytes, use -b option to extract) Instance ID : uuid:f62ffb2f-f4a7-4165-a27b-194db3e753b1 Document ID : xmp.did:F0F8FF171085E011B1D1F7B9B6383C33 Original Document ID : xmp.did:B91E5B5EF0F9DE11A64EA8333FE83383 Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:B91E5B5EF0F9DE11A64EA8333FE83383, xmp.iid:BA1E5B5EF0F9DE11A64EA8333FE83383, xmp.iid:BB1E5B5EF0F9DE11A64EA8333FE83383, xmp.iid:C01E5B5EF0F9DE11A64EA8333FE83383, xmp.iid:C11E5B5EF0F9DE11A64EA8333FE83383, xmp.iid:0EBF84FAF2F9DE11A64EA8333FE83383, xmp.iid:0FBF84FAF2F9DE11A64EA8333FE83383, xmp.iid:12BF84FAF2F9DE11A64EA8333FE83383, xmp.iid:3398FACFB456DF119990BA71F9CAE490, xmp.iid:3498FACFB456DF119990BA71F9CAE490, xmp.iid:E78696A7AE61DF11AFD6CEBC11641B27, xmp.iid:E88696A7AE61DF11AFD6CEBC11641B27, xmp.iid:EA8696A7AE61DF11AFD6CEBC11641B27, xmp.iid:804D09A7BC61DF11865E91E5C3E8F71A, xmp.iid:814D09A7BC61DF11865E91E5C3E8F71A, xmp.iid:53B12D0CC967DF1182DFD89BF47C8805, xmp.iid:385D7D4FFD72DF11A801EBFF1EB8F104, xmp.iid:70FD6C3DBB77DF11A956DDC892D9AEB6, xmp.iid:D5922787BF77DF11A956DDC892D9AEB6, xmp.iid:D6922787BF77DF11A956DDC892D9AEB6, xmp.iid:615304B98D7EDF1184509CE43836F13F, xmp.iid:EB6593B9B37EDF1184509CE43836F13F, xmp.iid:891B76F2C77EDF1184509CE43836F13F, xmp.iid:8A1B76F2C77EDF1184509CE43836F13F, xmp.iid:030F3FDCC97EDF1184509CE43836F13F, xmp.iid:2AA7F9FF35F6DF11BC44F9FEA791AFB7, xmp.iid:98EE868D1402E0119991832AEC44D0D6, xmp.iid:99EE868D1402E0119991832AEC44D0D6, xmp.iid:245B8B7D0661E011932EBEF5853F2AE8, xmp.iid:255B8B7D0661E011932EBEF5853F2AE8, xmp.iid:F747681B527DE011B8B8EF9CCB2C8A1C, xmp.iid:1C237288C47FE011AB74FA122B9CC4BE, xmp.iid:42BF6F9A0A85E011B1D1F7B9B6383C33, xmp.iid:EFF8FF171085E011B1D1F7B9B6383C33, xmp.iid:F0F8FF171085E011B1D1F7B9B6383C33 History When : 2010:01:05 12:49:50+01:00, 2010:01:05 12:50:02+01:00, 2010:01:05 12:50:02+01:00, 2010:01:05 12:56:22+01:00, 2010:01:05 12:56:51+01:00, 2010:01:05 13:12:54+01:00, 2010:01:05 13:13:03+01:00, 2010:01:05 13:15:20+01:00, 2010:05:03 15:07:22+02:00, 2010:05:03 15:07:36+02:00, 2010:05:17 14:21:42+02:00, 2010:05:17 14:21:42+02:00, 2010:05:17 14:43:40+02:00, 2010:05:17 16:05:25+02:00, 2010:05:17 16:05:25+02:00, 2010:05:25 08:46:54+02:00, 2010:06:08 15:07:01+02:00, 2010:06:14 15:49:37+02:00, 2010:06:14 16:35:01+02:00, 2010:06:14 16:35:10+02:00, 2010:06:23 08:08:20+02:00, 2010:06:23 12:40:22+02:00, 2010:06:23 15:05:29+02:00, 2010:06:23 15:05:33+02:00, 2010:06:23 15:29:13+02:00, 2010:11:22 13:42:43+01:00, 2010:12:07 16:13:31+01:00, 2010:12:07 16:13:31+01:00, 2011:04:07 13:18:39+02:00, 2011:04:07 13:18:39+02:00, 2011:05:13 13:19:12+02:00, 2011:05:16 15:58:10+02:00, 2011:05:23 09:27+02:00, 2011:05:23 09:41:38+02:00, 2011:05:23 09:41:38+02:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /metadata, /;/metadata, /, /, /, /metadata, / Derived From Instance ID : xmp.iid:EFF8FF171085E011B1D1F7B9B6383C33 Derived From Document ID : xmp.did:255B8B7D0661E011932EBEF5853F2AE8 Derived From Original Document ID: xmp.did:B91E5B5EF0F9DE11A64EA8333FE83383 Derived From Rendition Class : default Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:18F3980915E1DC1195A4A6BE878F70DC, xmp.iid:5732BBCAB87FE011B459AE7F5608266A, xmp.iid:102871CEC2F3DF118AE4F312EBD66F3E, xmp.iid:5F0CE6416774DF11BA3BEB744DE77ACD, xmp.iid:5732BBCAB87FE011B459AE7F5608266A, xmp.iid:3A7A4599AB1BDF11B6A68FBF5FDA4E0D, xmp.iid:73B975B01C85E011997A9EAEDE5EF834, xmp.iid:E3DD9E39055CDF11BFDBDE8247E16549, xmp.iid:97E5A71F576EDF11813CA6FFEA25C60C, xmp.iid:72229BD1B5F6DD1196D3D9D677E023E5 Manifest Reference Document ID : uuid:17F3980915E1DC1195A4A6BE878F70DC, xmp.did:5732BBCAB87FE011B459AE7F5608266A, xmp.did:102871CEC2F3DF118AE4F312EBD66F3E, xmp.did:5F0CE6416774DF11BA3BEB744DE77ACD, xmp.did:5732BBCAB87FE011B459AE7F5608266A, xmp.did:3A7A4599AB1BDF11B6A68FBF5FDA4E0D, xmp.did:73B975B01C85E011997A9EAEDE5EF834, xmp.did:E3DD9E39055CDF11BFDBDE8247E16549, xmp.did:97E5A71F576EDF11813CA6FFEA25C60C, xmp.did:72229BD1B5F6DD1196D3D9D677E023E5 Doc Change Count : 290 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 16 Creator : Adobe InDesign CS4 (6.0)EXIF Metadata provided by EXIF.tools