Telecell Mobile T50R Wi-Fi device User Manual E N8 drw0002 Model 1

Telecell Mobile (H.K) Ltd. Wi-Fi device E N8 drw0002 Model 1

User manual

Download: Telecell Mobile T50R Wi-Fi device User Manual E                N8 drw0002 Model  1
Mirror Download [FCC.gov]Telecell Mobile T50R Wi-Fi device User Manual E                N8 drw0002 Model  1
Document ID3823950
Application ID0r9p1oEF3YW02iIvopFPWg==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize14.56kB (182046 bits)
Date Submitted2018-04-20 00:00:00
Date Available2018-04-20 00:00:00
Creation Date2018-04-17 09:25:58
Producing SoftwareAdobe Acrobat Pro 9.0.0
Document Lastmod2018-04-17 09:25:58
Document TitleE:\项目\N8\drw0002 Model (1)
Document CreatorAdobe Acrobat Pro 9.0.0
Document Author: Administrator

FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless Wi-Fi device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for
exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on
standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The
exposure standard for wireless mobile Wi-Fi devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the Wi-Fi device transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the
Wi-Fi device while operating can be well below the maximum value. This is because the Wi-Fi device is designed to operate at multiple
power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station
antenna, the lower the power output. Before a Wi-Fi device model is available for sale to the public, it must be tested and certified to the
FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this
model Wi-Fi device when tested for use at the ear is 0.150W/Kg and when worn on the body, as described in this user guide, is
0.138W/Kg(Body-worn measurements differ among Wi-Fi device models, depending upon available accessories and FCC
requirements). While there may be differences between the SAR levels of various Wi-Fi devices and at various positions, they all meet
the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model Wi-Fi device with all
reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model Wi-Fi device is
on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on
FCC ID: 2ADX3T50RAdditional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications
Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile Wi-Fi
device used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of
safety to give additional protection for the public and to account for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance
of 5mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters,
and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet
these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved
antenna.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2018:04:17 09:25:58+08:00
Modify Date                     : 2018:04:17 09:25:58+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2018:04:17 09:25:58+08:00
Creator Tool                    : Adobe Acrobat Pro 9.0.0
Format                          : application/pdf
Title                           : E:\项目\N8\drw0002 Model (1)
Creator                         : Administrator
Document ID                     : uuid:e85b7028-4f80-4d47-a7f3-f16e587e269d
Instance ID                     : uuid:ea00b03f-bb6b-4ea6-96e8-5269b96b4f4b
Producer                        : Adobe Acrobat Pro 9.0.0
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ADX3T50R

Navigation menu