Telepower Communication TPX820 Wireless Router User Manual TPX820 v1 0x

Download:
Mirror Download [FCC.gov]
Document ID	3520533
Application ID	fu4bxlYT0XYMWESD+W63Vw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	86.87kB (1085867 bits)
Date Submitted	2017-08-21 00:00:00
Date Available	2017-08-22 00:00:00
Creation Date	2017-08-10 09:19:24
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2017-08-10 09:19:24
Document Title	Microsoft Word - TPX820 User Manual v1.0.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	0357

TPX820 User Manual
TPX820 User Manual
V1.0
Page 1/62
TPX820 User Manual
1. LEDIndicators& Cables
Before you use this product, you must first have a general
understandingofLEDindicators,andhowtoconnect.
1.1 LED indicator
(1)Front View
LED
Status
Description
There is a service stream or is being
Flashing(green)
registered
Phone1 / 2
Successfullyregisteredtothesoftswitch,but
Steady(Green)
nobusinessflow
Network interface is connected, but no
Steady(Green)
datatransmission.
LAN
1/2/3/4
The system is not powered on or the
Off
network interface is not connected to the
networkdevice
Page 2/62
TPX820 User Manual
Flashing(green)
Thereisdatatransmission
The network connection is successful and
Steady(Green)
thephysicalconnectionhasbeenestablished
WAN
The network is not connected or the
Off
connectionfails
POWER
WLAN
Flashing(green)
Thereisdatatransmission
Steady(red)
Thesystemispoweredupnormally
Off
Thesystemisnotpoweredon
Steady(Green)
WIFIswitchisturnedon,APwork
Flashing(green)
Thereisdatatransmission
(2)Back View
Interface
Power
Description
Connectthepoweradapter
Page 3/62
TPX820 User Manual
Phone1 / 2
Connectthephone
USB
USBinterface
WAN
ConnectaccesstotheInternet
LAN (1/2/3/4)
WIFInetworkdeviceconnectedtoalocalswitch
1.2 Hardware Installation
Beforesettingupyourhomegateway,youmustconnectyourdevicecorrectly:
Use Ethernet as Uplink 
1. WithRJ-11cabletoconnectatelephonetoafixedtelephonejackport;
2. DevicewithanEthernetcableandamodemconnectedwanport;
3. TheLANportyourcomputerdeviceconnectedviaRJ-45cable;
4. Oneendofthepowercordisconnectedtothepowerinterfaceofthe
deviceandtheotherendisconnectedtoanelectricaloutlet;
5. Starttherouter
6. Checkthepower,wanLANportopeningandanLEDlamptoensure
networkconnection.
Use LTE as uplink
1. WithRJ-11cabletoconnectatelephonetoafixedtelephonejackport;
2. CheckthattheSIMcardisconnected;
3. TheLANportyourcomputerdeviceconnectedviaRJ-45cable;
Page 4/62
TPX820 User Manual
4. Oneendofthepowercordisconnectedtothepowerinterfaceofthe
deviceandtheotherendisconnectedtoanelectricaloutlet;
5. Starttherouter
6. Checkpower,LTEandLANportLEDlamptoensurenetworkconnection.
Warning –
Part15.19
1.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjectto
thefollowingtwoconditions:
(1)Thisdevicemaynotcauseharmfulinterference.
(2)Thisdevicemustacceptanyinterferencereceived,includinginterference
thatmaycauseundesiredoperation.
Part15.21
2.Changesormodificationsnotexpresslyapprovedbythepartyresponsible
forcompliancecouldvoidtheuser'sauthoritytooperatetheequipment.
Part15.105
NOTE:Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfor
aClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsare
designedtoprovidereasonableprotectionagainstharmfulinterferenceina
residentialinstallation.
Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,if
notinstalledandusedinaccordancewiththeinstructions,maycauseharmful
Page 5/62
TPX820 User Manual
interferencetoradiocommunications.However,thereisnoguaranteethat
interferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoes
causeharmfulinterferencetoradioortelevisionreception,whichcanbe
determinedbyturningtheequipmentoffandon,theuserisencouragedtotry
tocorrecttheinterferencebyoneormoreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna.
Increasetheseparationbetweentheequipmentandreceiver.
Connecttheequipmentintoanoutletonacircuitdifferentfromthatto
whichthereceiverisconnected.
Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
FCCRFRadiationExposureStatement
ThisequipmentcomplieswithFCCRFradiationexposurelimitssetforthforan
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body.
Page 6/62
TPX820 User Manual
2.Web admin page settings
2.1 WEB login page
Built-inWebserverdevicein response toHTTP get / postrequest.Users
canuseaWebbrowser,suchasMicrosoft'sIEtothelogintheWEBadminpage
andconfigurethedevice.
2.1.1URLformat
URLformatloginwebpageis:
http://LANportIPaddress
UsuallythedefaultLANportIPaddress:192.168.3.1,entertheappropriate
addressintheaddressinputfield,andthepagewilljumptotheloginpagefor
thedevice,Asshownbelow:
2.1.2 About password
Log levelTPX820has two, namely general and administrator-level user
level,differentstandardshavedifferentpasswords.
Page 7/62
TPX820 User Manual
GeneralleveluserstobrowseandconfigureallTPX820parameters,
inadditiontotheSIPlinecannotbechangedinsomeparameters,suchas
serveraddressandport;theadministratorlevelusercanconfigureallother
parameters.
TPX820defaultmanagement-levelpassword:admin
TPX820defaultnormaluserpassword:user
Page 8/62
TPX820 User Manual
2.2 WEB admin page
Numbering
name
description
Click the secondary navigation bar, the
Timesthe
corresponding sub navigation bar will
navigationbar
appear
Clickthechildnavigationbartoenterthe
Subnavigationbar
correspondingconfigurationpage
title
Configurethetitle
Configurationbar
Configurationbar
TPX820displayfirmware
version,DSPversion, the current time and
management.The user presses the exit
DeviceInformation
exit, press restart
to
to restart.
Displayhelpinformation,theusercanget
Help
helphere
After the parameters are changed, you need to click the button to
save to make it functional. When you see notifications like
you are most likely need
to reboot the device.
Page 9/62
TPX820 User Manual
The single Save button means your parameters will be saved but it
won’t be effective until you really apply them or reboot the device.
Clickthisbuttontocancelthechange
Clickthisbuttontorestartthedevice
Page 10/62
TPX820 User Manual
3. Configure from WEBadmin page
3.1 Status
Inthispage,theusercanviewthesysteminformationandsystemlog
information of the home gateway. Users landing through the web
pageafterthefirstjumpisthepage.
3.1.1 System Information
Inthispage,userscanviewtheproductinformationofthehome
gateway,SIPaccountstatus,networkstatusandsystemstatus.
Page 11/62
TPX820 User Manual
3.1.2 System Log
Inthisconfigurationpage,theusercanviewthesystemrecords;
the system records contain the home gateway important
configurationinformation.
In this page, the user can refresh, clear, and save the relevant
systeminformationbyclickingtheappropriatebutton.
3.2 Network
3.2.1 WAN
(1) Static IP
WhenthegatewayWANportstatusissettostatic,theuserneeds
toconfigureanIPaddress,subnetmask,default
gateway,DNSandthepreferredvalueofthealternativeDNS.
Page 12/62
TPX820 User Manual
parametername
Description
(Setthe parametersin amulti-WANport settings
page)with the keyword markedWANport service
Service(name)
model
IPprotocolmode
ThereareonlyatemporaryconnectionmodeIPv4
INTERNETaccess
SelectStaticIP
EnableNAT
WANportneedstobesetinamulti-page,see3.2.7
Optional"pass-through""Snooping""Native
DHCPServiceType
service"
VLANmode
WANportneedstobesetinamulti-page,see3.2.7
VLANID
WANportneedstobesetinamulti-page,see3.2.7
IPaddresses
IPInternetports
Subnetmask
ThesubnetmaskfortheInternetport
Defaultgateway
ThedefaultgatewayfortheInternetport
DNSMode
Thisisanoptionaloption
PrimaryDNS
PrimaryDNSInternetport
SecondaryDNS
SecondaryDNSInternetport
(2) DHCP mode
Page 13/62
TPX820 User Manual
Parametername
description
Use keywords to indicateservice modeWAN1 ~
WAN5(setparametersin
themulti-WANport
servicename
settingspage)
Connectionmode
ThereareonlyatemporaryconnectionmodeIPv4
INTERNETaccess
SelectDHCP
Andautomaticallyselectingfromthe
specifiedDNS-typetwomodes.
♦DNStypetoAuto,thehomegateway
willautomaticallyobtainpreferredDNSand
alternateDNSDHCPserver.
♦ DNStype is specified, the user should manually
DNSMode
configurethepreferredandalternativeDNSDNS.
PrimaryDNS
EquipmentpreferredDNS
FromDNS
EquipmentSecondaryDNS
DHCPupdate
RefreshDHCPIP
DHCP
(Option60)
Vendor
SpecifiestheDHCPVendorfield
Page 14/62
TPX820 User Manual
(3) PPPOE mode
parametername
Description
UsekeywordstoindicateservicemodeWAN1~
WAN5(setparametersinthemulti-WANportsettings
servicename
page)
Connectionmode ThereareonlyatemporaryconnectionmodeIPv4
INTERNETaccess SelectPPPoE
FillinthePPPoEaccountobtainedfrom
username
theInternetserviceprovider
FillinthePPPoEpasswordobtainedfromyour
password
Internetserviceprovider
confirmpassword EnterthePPPoEpasswordagain
Page 15/62
TPX820 User Manual
Select
OptionsfromtheKeepAlive,OnDemand,andManual
modeinthreeways:
Whenthemodeiswhen♦KeepAlive,theuserneedsto
setthe'keepaliveredialperiod'valueintherange
of0to3600s,thedefaultsettingis60s;
Whenthemodeis♦OnDemand,usersneedtoset
themondemandidletime'valueintherange
of0-60minutes,thedefaultsettingis5minutes;
♦WhenthemodeisManual,whichdonotneedtofillin
Runningmode
twosettings.
OperationMode
Keep Alive,transmissiontimeinterval
Keep Alive Redial Set On demand transmission time interval
Period
(4) Bridge Mode
Page 16/62
TPX820 User Manual
parametername
INTERNETaccess
LAN
description
Optional:DHCP,staticIP,PPPoE
connection
modes
bridging
DNSMode
Optional:Automaticormanualconfiguration
3.2.2 LTE
TPX820 supports using LTE as uplink, In LTE settings you will find:
Afterapplyingandreboot,LTEconnectionstatewillshowonstatus
page.
Page 17/62
TPX820 User Manual
2.2.3 LAN
parametername
description
EntertheIPaddressoftherouterLAN,LANIP
addressesofallcomputersmustbewiththisIP
addressinthesamesegment,andthedefault
gatewayIPaddressmustdothis.(Default
IPaddresses
is192.168.168.1)
Page 18/62
TPX820 User Manual
Enterthesubnetmasktodeterminethesizeofthe
Subnetmask
network(thedefaultis255.255.255.0/24)
DHCPserver
WhethertoenableDHCPserver
StartIPaddressisanIPaddresspooltoentera
validIPaddresstoDHCPserversasDHCPclient,if
therouterLAN
IPaddress192.168.168.1,192.168.168.2IPaddresscan
Addresspoolstart
bethestartingormore,butlessthanthe
address
endIPaddress
TheendoftheipaddressfortheIPaddresspoolenter
Addresspoolend
avalidIPaddressas
address
theDHCPserversendstheDHCPclient
Andautomaticallyselectingfromthe
specifiedDNS-typetwomodes.
♦DNStypetoAuto,thehomegatewaydevice
fromaLANportDHCPserverautomatically
PrimaryDNSandSecondaryDNS
♦DNStypeisspecified,theusershouldmanually
DNSMode
configurethepreferredandsecondaryDNS
PrimaryDNS
EquipmentpreferredDNS
SecondaryDNS
EquipmentSecondaryDNS
Effectiveuseoftimethe
DHCPserverIPaddressassignedtothecomputer
withinthenetwork.Withinthisperiodoftime,the
Customerlease
serverdoesnotassignanIPaddresstoanother
time
computer.
SelectOpenordisabled;Ifenabled,
forwardingnetworkLANsidetotheWANsideofthe
DNSproxy
networkDNSrequest
Page 19/62
TPX820 User Manual
3.2.4 VPN
VPNtechnologytoestablishaprivatenetworkoverapublic
network.TheconnectionbetweenanytwonodesoftheVPNnetwork
andprivatenetworkisnotrequiredintheconventionalendphysicallink,
logicallinktransmissionarchitecturebuttheserviceproviderinthe
publicnetworkprovidedbythenetworkplatform,user
data.VPNtechnologies,ausercanestablishaprivateconnection
betweenanytwodevicesonthepublicnetworkandtransmittingdata.
parametername
description
IfVPNisenabled.VPNmodethe
EnableVPN
canselectfromtwomodesPPTPandL2TP.
IPserver
FillVPNserver'sIPaddress
username
Fillintheusernamerequiredforauthentication
password
Fillinthepasswordrequiredforauthentication
Page 20/62
user
TPX820 User Manual
2.2.5 Advanced Settings
parametername
description
Natmaximum
numberof
connections
4096default
Mssmode
Therearetwooptionsto specifyandautomatic
Mssvalue
SetthevalueoftheTCP
AntiDosAttack
Canbeselectedtoenableordisable
IPAddressConflict
Selectenabledordisabled;ifenabled,will
Detection
promptoccursIPconflictTPX820
IPaddressconflict
detectioninterval
IPaddressconflictdetectiontimeinterval
3.2.6 Port Management
parametername
description
100MFull
WANspeed
Duplex,100MHalf-duplex,full-duplexin10Mand10
negotiationsettings
Mhalf-duplexspeednegotiationmethodof
Page 21/62
TPX820 User Manual
selectionfromtheportsupportsauto-negotiation
100MFull
Duplex,100MHalf-duplex,full-duplexin10Mand10
LAN1~LAN4speed Mhalf-duplexspeednegotiationmethodof
negotiationsettings
selectionfromtheportsupportsauto-negotiation
3.2.7 multi-WAN port settings
Page Setup in the management of working mode to Advanced mode
Multiple pages may be provided in a WAN WAN, a click connection mode wan new
connection, the page as shown below:
Click on New wan connection can create another wan2, then select wan2 connected
as follows:
parametername
description
VLANmode
WhethertoopentheVLAN
VLANID
Fillinthecorrespondingidnumber
Page 22/62
TPX820 User Manual
3.2.8 QoS
parametername
description
EnableQoS
WhetherQoSisenabled
Uplinkbandwidth
Settrafficsize
3.2.9 DMZ
AftersettingtheLANDMZhost,whichwillbecompletelyexposedtothe
wideareanetwork,youcanachieveunlimitedtwo-waycommunication.
BringinsecuritytotheDMZaddclientmaygivethelocalnetwork,sodo
notusethisone.
parametername
DMZsettings
description
OpenorprohibittheDMZsettings
DMZHostIPaddress UsedtoentertheDMZhostIPaddressneeded
3.2.10 MACClone
MACaddressisthehardwareaddressofthenetwork
device.SometimesanetworkprovidermayMACnamesofnetwork
Page 23/62
TPX820 User Manual
devicesboundtothenetworkaccount.Sowhentheuserusesthe
newhomegatewaymaynotbecertifiedbythesupplier.Inthiscase,
theusercancloneyourcomputer'sphysicaladdressofthehome
gatewaytotheInternetporttouseMACcloning.
MACaddressisanimportantparameterofnetworkdevices,sousers
shouldmakesurethecorrectMACdevicetopreventhomegateway
cannotbeused.
IfyoumakeamistakeMACaddress,ausercanloghomegateway
pagesforviewingandclonedintoTPX820correctaddressorto
restorethefactoryequipment.
Enable MAC address cloning
1.Click
2.Click
click
3.Click
button to obtain the MAC address of the PC
button to save the changes; if you do not want to use MAC cloning; or
button to cancel the change.
button to reboot the device.
Page 24/62
TPX820 User Manual
3.3 Wireless
3.3.1 Basic settings
parametername
description
SelectOnorOfftoenableordisablethewireless
WIFIswitch
connection
Selectoneofthemodesbasedonthewireless
Networkmode
clienttype.Thedefaultis11b/g/nmixedmode
ItisthebasicidentityofthewirelessLAN.SSIDcan
beanycombinationofalphanumericorspecial
characters.Itwillbedisplayedinthewireless
SSID
networkcardsearchtothewirelessnetworklist
MultiSSID1~SSID3
ItcanbeachievedwithmorethanoneAPSSID
AftercheckingonthecorrespondingSSIDisno
longerdisplayedinthesearchtothewireless
hide
networkcardwirelessnetworklist
BroadcastNetwork
Initialopenstate,fortherouterintothewireless
Page 25/62
TPX820 User Manual
Name(SSID)
networkbroadcastSSID
APisolationwithinthis,Enablingcustomerswithin
APIsolation
theendofthisAPcannotvisiteachother
ThisouterbarrierAP,APotherclientsarenot
MBSSIDAPisolation
presentattheclientcannotaccessthisAP
AsetofwirelessstationsandawirelessLANaccess
point(AP)composedofabasicaccess
unit(BSS),BSS,eachcomputermustbeconfigured
withthesameBSSID,anAPshallwireless
BSSID
identification
CanbeselectedinAutoSelect/
Frequency(channel)
1/2/3/4/5/6/7/8/9/10/11/12/13
1.MixedMode:Inthismode,thepreviouswireless
networkcardmaybeidentifiedandconnectedto
thePre-NAP,butthethroughputwillbeaffected
2.GreenField:toachievehighthroughput,butit
willaffectthesafetyofbackwardcompatibility,and
Operatingmode
system
Pleaseselectthedefaultsettings,
Channelbandwidth
divided20MHzand20/40MHztwokinds
Thedefaultisautomatic,inordertoachieve
excellentbiterrorrateperformance,youmustset
Protectioninterval
theappropriateprotectioninterval
Pointingcontrolsignalhasavalueintherange0
MCS
to32,thedefaultisautomatic
Reversedirection
Youcanchoosetoenableordisablethis
permission(RDG)
permission
Page 26/62
TPX820 User Manual
3.3.2 Wireless Security
Choose the SSID you want to configure from the
SSIDChoice
dropdownmenu.
Chooseasuitableencryptionmodetoimprovethe
Securitymode
securityandprivacyofwirelesspackets
Different encryption mode is selected will appear different web interface, you can
make the appropriate configuration through these web interface. Here are some
common ways to encrypt:
(1)OPENWEP：WEP encryption a handshake, is encrypted by a WEP key to:
Page 27/62
TPX820 User Manual
WEP represents a Wired Equivalent Privacy, which is a basic encryption.
Default
4isusedtoselectaWEPkeyinthekeysetontheclientcardis
key
alsorequiredandthiscorrespondsto
TheWEPkey.Select
the64-bitkey10must
enterHexcharacters,ASCIIcharacters,or5;128-bitkeyselection
WEPkey
foraninputcharacter26HexorASCIIcharacters13
(2)WPA-PSK, WPA mode router will use a shared key based on:
Thechoiceforwirelessdataencryptionsecurity
WPAAlgorithms
algorithm,optionsareTKIP,AEStwokinds
Passpassword
SettingWPA-PSKsecuritypassword
Privatekeyupdate
spacing
Atimingsettingkeyupdatecycle,thedefaultis3600s
(3)WPA2-PSK, WPA2 mode router will use a shared key based on:
Page 28/62
TPX820 User Manual
4)WPAPSKWPA2PSK 与 WPA2PSK 的设置方式一致.
WPA-PSK / WPA2-PSK security type is actually a simplified version of WPA / WPA2,
which is the shared key WPA mode, high security settings are also relatively simple for
ordinary home users and small businesses based.
Thechoiceforwirelessdataencryptionsecurity
algorithm,options
areTKIP,AES,TKIP/AES.11Nmodeisnot
WPAAlgorithms
supportedTKIPalgorithm
Passpassword
SettingWPA-PSK/WPA2-PSKsecuritypassword
Privatekeyupdate
Atimingsettingkeyupdatecycle,thedefault
spacing
is3600s
Page 29/62
TPX820 User Manual
Access Policy:
parametername
description
Wirelessaccesscontrolbasedonthe MACaddress of the specified
Accessstrategy
conditions allow or disallow access to the wireless network client
Disable:indicatesthatthewirelessaccesscontrolpolicyisnot
enabled;allows:indicatesthatonlytheclientsinthelistare
allowedtoaccessanddeny:onlytheclientaccessinthelistis
Strategy
disabled
Added
Enteryouwanttoalloworprohibitwirelessclient'sMACaddress
Examples: Disable the wireless network card MAC address 00: 1F: D0: 62: BA: FF
computers to access the wireless network and other computers can access this network.
Method: As shown, the selection policy is rejected, the new fill 00: 1F: D0: 62: BA : FF,
after setting, click the Save and reboot the device to take effect.
3.3.3 Wi-Fi Multimedia
WMM(Wi-FiMulti-Media)istheWi-FiAlliance
(WFA)ofQoScertificate.Providingthesetofwirelessmultimedia
parameters,WMMallowswirelesscommunicationrangein
accordancewithapriorityofthedatatypedefinition.To
makeWMMfunctionwork,wirelessclientsmustalsosupportWMM.
Page 30/62
TPX820 User Manual
3.3.4 Wi-Fi Protected Setup (WPS)
WPS is Wi-Fi Alliancehaslaunchedanew Wi-Fi security
settings (Wi-FiProtectedSetup) standard,mainlyduetothe
introductionofthisstandardistoaddresslong-standingWi-Fi
encryptionandauthenticationproceduretoocomplicatedHardills
The By WPS button onthewirelessrouter allowsustoquicklyand
easilyencryptwirelessnetworktotransmitdatatoprevent
unauthorizedusersinvasion. Ontheonehandbothtoensurethe
safetyofthewirelessnetwork,ontheotherhandletussetthe
encryptioneasy.
Page 31/62
TPX820 User Manual
parametername
description
WPSSettings
OpenandclosetheWPSfunction
WPSthecurrentdisplay,includingthecurrent
status,thenameoftheSSID,authentication,
WPSSummary
encryptiontype,andthepresentAPPINcode
Generate
GenerateanewPINcode
Thesystemusesthedefaultsecuritypolicytoallow
ResetOOB
otherusersaccessusinganon-WPS
1. PIN:PINoptionsbelow,fillintherequired
accessclients(wirelessLAN)PINcode,andthen
clickApply.WPStransmissionstartsignal,this
time,theclientalsoopenonthePINaccess,the
clientcanautomaticallyconnectwirelessAP
1. PBC:PBCmode,therearetwowaystostart,you
WPSmode
canpressthePBCbuttononthe
Page 32/62
TPX820 User Manual
hardwaredirectly,orchoosefromthesoftware
toPBCmode,thenclickApply.Bothapproaches
canbeconnectedtoactivate
theWPSPBCmode,atthistimeonlyneedto
selectthePBCaccessclient,theclientcan
automaticallyconnecttothewirelessAP
ThecurrentWPSstatusinthreeways:
WSC:Idlestate
WSC:StartWSCProcessstateinformationasthe
start
WSC:Successstatetohaveaclientaccess
WPSstatus
toAP,WPSconnectionissuccessful
3.3.5 Wireless Client
The wireless client can display information that has been connected to the apparatus
according to the present AP:
3.3.6 Advanced Settings
Page 33/62
TPX820 User Manual
parametername
description
BGProtection
SelectOn,Offorautomatically,todetermine
Mode
thestateoftheprotectedmodeBG
Sendthebeaconframetimeinterval,withinthis
timerange,willsendabeaconframetoobtain
thesurroundingwirelessnetworkaccess
Beaconinterval
information
Specifiestheintervalforthetransmissionofthe
indicationmessage,whichisacountdownjob
thattellsthenextclientwindowtoreceive
Databeaconratio
broadcastandmulticast
Specifytheslicethresholdforthepacket.When
thelengthofthepacketexceedstheslice
threshold,itisautomaticallydividedintomultiple
Splitboundaries
packets
Transferrequest
RTSthresholdvaluetospecifyadatapacket,when
limit
thepacketexceedsthisvalue,therouterwill
Page 34/62
TPX820 User Manual
sendRTStothedestinationsiteconsultations
DefinethecurrentSSIDforwirelessAPtransmit
Transmitpower
strongerpowerlevel,thegreaterthesignal
Enabledbydefault,thesystemisnotcompatible
withtheconventionalIEEE802.11,therateof
Shortpreamble
operationofthesystem1,2Mpbs
Shortcollision
Bydefault,theopeningcanincreasethe
groove
transmissionrateofwirelesscommunication
MACaddressbelongslayercharacteristics,can
Transmissionburst
improvetheTCPtransportnetworkfairness
Enhancedlocalareanetworktoensurethatthe
packetcorrectlyreachesthedestination
Packetaggregation mechanism
SupportIEEE802.11
H
Bydefault,itcanbeturnedon
countrycode
ThereCN,US,JP,FR,TW,IE,HK,NONEoptional
Wi-FiMultimedia
(WMM)
Wi-FiMultimedia
WMMfunctionisturnedon,takeeffectuntil
capability
open
Automaticpower
Openwillreducethewirelessperformance,but
savingmode
canplaytheroleofenergysaving
WMMParameters
ClickWMMConfigurationdirectlyoutofWi-Fi
multimediaparametersconfigurationpage
Multicasttounicast
conversion
Bydefault,youcanchoosetoturnon
4.SIP related settings
4.1 SIPSettings
In this page, users can setthe information related toSIP,NATand
Page 35/62
TPX820 User Manual
otherrelevantinformation.
parametername
description
1.WhethertoenableNATTraversal
2.ThedevicesupportsSTUNTraversal;ifyouwant
NATTraversal
totraverseNAT/Firewall,chooseSTUN
STUNserver
Add the correctIPaddress of theSTUNservice
address
providers
NATrefresh
NATrefresh
interval
configurationis60s
interval
setting,
the
STUNportservices SettingNATportnumber,default5060
Page 36/62
default
TPX820 User Manual
4.2 VoIP QoS
QoScanimprovethequalityofserviceforvoiceapplications.
默认值为 0，可以设置值的范围是 0~63.
参数名称
SIP /RTP/Data QoS
描述
默认值为 0，可以设置值的范围是 0~63.
4.3 FXS(FXS1&FXS2)
4.3.1 Basic settings
Settheuser'sbasicinformationVOIPserviceprovider,suchasphone
numbers,accountnumbers,passwordsandSIPagents.
parametername
description
Page 37/62
TPX820 User Manual
Accountenabled
Line1isenabled
WhethertoenablePeerToPeer
Ifenabled,theaccountwill
notissuearegistration
requesttotheSIPserver;displayingthe
registrationissuccessful,theline1candial
outthestatuspagewill,butthenumbercannot
Endtoend
bedialedexternalline1
FillintheSIPserver'sdomainname
Registertheserver
orIPaddress
Fillintheproxyserver'sdomainname
Proxyserver
orIPaddress
Backuptheproxy
FillinthedomainnameorIPaddressofthe
server
backupproxyserver
Registertheserver
port
FillSIPserverportnumber,defaultis5060
Fillintheproxyserverportnumber,default
Proxyserverport
is5060
Backuptheproxy
Fillbackupproxyserverportnumber,default
serverport
is5060
showname
Thenameofthenumber
registeraccount
SIPserverprovidesthephonenumber
Nameofcertification SIPserverprovidestheaccount
password
SIPserverprovidestheSIPpassword
Page 38/62
TPX820 User Manual
4.3.2 Audio settings
parametername
description
Selecttheappropriatecoding
modefromG.711A,G.711U,G.722,G.729andG.
Encoding1
723codingschemefivekinds
Selecttheappropriatecoding
modefromG.711A,G.711U,G.722,G.729andG.
2encoding
723codingschemefivekinds
Selecttheappropriatecoding
modefromG.711A,G.711U,G.722,G.729andG.
3encoding
723codingschemefivekinds
Selecttheappropriatecoding
modefromG.711A,G.711U,G.722,G.729andG.
4encoding
723codingschemefivekinds
Selecttheappropriatecoding
modefromG.711A,G.711U,G.722,G.729andG.
Encoding5
723codingschemefivekinds
SelectingacodingrateG.723,therearetwo
G.723codingrate
kindsof5.3kbpsand6.3kbps
SettheRTPwrappingcycle,thedefault
Packingcycle
configurationis20ms
Mutesuppression
Whetheritismuted
Whethertoenableechocancellation,the
Echocancellation
defaultisenabled
Page 39/62
TPX820 User Manual
T.38enabled
WhethertoopenT.38
T.38redundancy
T.38CNGdetecti
onisenabled
4.3.3 Supplementary Services
parametername
Callwaiting
description
Whethertoenablecallwaiting
Fill in the hotline number.After the user set up,
Hotlinecall
hook,once home gateway will automatically dial
number
outthehotlinenumber
WhetherMWI(messagewaitingindication)isena
bled,if the user needs to use voice mail, enable
MWIEnable
thisfeature
FillSIPservice provider voice mail signature
VoiceMailbox
toElatixplatform as an example, their voice mail
Numbers
signatureis97*
Whethertoopenthebother,openanyphonecan
DND
notcall;thedefaultisprohibited
Page 40/62
TPX820 User Manual
4.3.4 Advanced
parametername
description
WhethertoenabledomainnamerecognitionintheSIP
Domainnameformat
URI
Carryportinformation WhethercarryingportinformationoftheSIPURI
SignalPort
LocalportnumberoftheSIPprotocol,thedefaultis5060
Secondaryselectiondialmode,selectableitems
DTMFmodesetting
areIn-band,RFC2833andSIPInfo.
RFC2833Payload(>=
96)
Theusercanusethedefaultsettings
Thetimeintervalbetweentwonormalregistration
Registerrefreshtime
messages.Theusercanusethedefaultsettings.
TransmittingtheRTPportisprovided;ifset
RTPport
to"0",IPphonewillselectanidleporttosendRTP
Whenenabled,anunregisteredmessagewillbesent
beforetheregistrationisdisabledandnounregistered
CancelMessage
messageswillbesentbeforeregistration;shouldbeset
Enable
accordingtothedifferentserverrequirements
SessionRefreshTime
Theintervalbetweentwosessions,theusercanusethe
Page 41/62
TPX820 User Manual
(sec)
defaultsettings
Refresher
FromtheUACandUASselectRefresh
PrackEnable
WhetherPrackenabled
Ifthisoptionisenabled,IPphonesSIP-OPTIONwillbe
senttotheserver,ratherthanperiodically
sendHellopackets.TransmissiontimeintervalKeep-alive
SIPOPTIONSEnable
Interval
Detectingtimeintervalsthemasterserver,thedefault
Heartbeatcycle
valueis0,representsanenabled
Detectingthenumberoftimestheprimaryserverfails;the
Maximumdetection
defaultvalueisnolongerdetected
failurecount
after3,i.e.,threeprimaryserverfails
Keep-aliveinterval(10
-60s)
Thetimeintervalforsendingemptypackets
AnonymousCall
Whetheranonymouscallsareenabled
AnonymousCallBlock Whethertoenableanonymouscallblocking
SetDNSservertype,optionalitemshavetypeAandDNS
ProxyDNSType
SRV
UseOBProxyIn
Dialog
WhethertouseaproxyinaconversationOB
VPN
WhetherVPNenabled
Whenenabled,thesubscriptionmessageissentafterthe
Signupfor
registrationmessage;thesubscriptionmessageisnotsent
subscription
whenitisdisabled
Dialprefix
Addaprefixbeforedialingoutthenumber
Peerusertype
UsermodemaybeselectedorIPPhone
Callholdmethod
TherearetwowaystoHoldINFOReINVITEandmethods
Requesttheuserto
check
URIrequestchecktheuser
Acceptonlyrequests
fromtheserver
serveraddress
Whethertoenableonlyrequestsfromtheserver
SIPserveraddress
SIP
Whethertodetecttheresponseoftheregistrationserver
Receiveddetection
todeterminethepublicaddressofthesendingdevice
Page 42/62
TPX820 User Manual
5.Preferences
Inthispage,theusercansetthehomegatewaypreferences.
5.1 Volume Settings
parametername
description
MICvolumeadjustmenthandleinputsizes,adjustable
Enterthevolume from0to7
Outputvolume
Earpiecevolumeadjustmentlever,adjustablefrom0to7
5.2 Regional
parametername
description
Ringtonesstandard
Selectthetypeoftones,suchasChina,USA,India,etc.
Dialtone
Dialtone
busytone
Busytone
Tributetone
Hangupwarningtone
Page 43/62
TPX820 User Manual
Ringbacktone
Ringtonestone
Callwaitingtone
Callwaitingtone
MinimumJitterDelayandJitterdelayadaptivemechanism
Minimumjitterdelay
adoptedhomegateway
MaximumJitterDelayandJitterdelayadaptive
Maximumjitterdelay
mechanismadoptedhomegateway
Ringtime
Theringingtimeofthehomegateway
BellchooseSINUSOIDwaveform(sine)
andTrapezoid(trapezoidal),thedefault
Ringingwaveform
selectionSINUSOID
Ringingvoltage
Ringingvoltagesetting,thedefaultvalueof70
Ringingfrequency
Ringfrequencysetting,thedefaultvalueof25
FlashTimeMax
Flashmaxtime,thedefaultvalueof0.9
FlashTimeMin
Flashmintime,thedefaultvalueof0.1
5.3 Call Transfer
Page / parameter name
Features
Call
forwarding
description
All Forward
Whether to enable forwarding all calls
Busy Forward
Whether to enable busy forwarding calls
No Answer Forward
Whether to enable unanswered call forwarding
All Forward
Set the destination number for all calls
Busy Forward
Set the target number for the busy forwarding call
No Answer Forward
Set the target number for the unanswered call
Page 44/62
TPX820 User Manual
No Answer Timeout
Set the ringing time to be determined as unanswered
Keep the key code
Call Hold feature code, default * 07
Conference key code
Signature three-way conversation, the default * 09
Transfer key code
Call forwarding feature code, default * 08
Voice menu key
Signature voice menu, the default ****
R key enable
R to select to enable or disable
R cancel key combination code
R cancel key combination code is provided, in the range of R + 1
~R+9
R key combination code of the key holder disposed, in the range
R key combination code hold key of R + 1 ~ R + 9
Transfer key R keycombination
code
Function
key setting
Transfer R key combination provided key codes, in the range
of R + 1 ~ R + 9
R key combination code session R session key provided key combination code, in the range of R
key
+1~R+9
5.4 Miscellaneous
parametername
description
Codecloopcurrent
Hookloopcurrentdefaultvalue26
Impedancematching
Matchingset,thedefaultChinaCO(200+680||100nF)
WhethertoopenthecallerID;ifturnedon,displaythe
phonenumberofthecall,otherwiseitisnotdisplayed.Is
CallerID
turnedonbydefault
WhethertoopenCWCIDservice.Ifthecallison,the
phonenumberwaitingforthecallisdisplayed,otherwiseit
CWCIDService
isnotdisplayed;
Afterthehomegatewaydialsthenumberoftimestohear
Dialtimeout
thedialtone
Fastdialkey
Selectthedialkey"*"or"#"ordisabled
Page 45/62
TPX820 User Manual
WhethertoenableICMPPing.Ifenabled,thehome
gatewayatacertainlengthoftimewillpingSIPserver;if
disabled,thehomegatewaysends"hello"emptypacketto
ICMPPing
theserver
Whethertoopenthespecialcharactertranslationfunction;
Specialcharacter
ifenabled,whenyoupressthe#keywillbetranslated
escaping
into23%,comparedtoban#
5.4.1Digit Map
5.4.1 General Settings
parametername
description
Dialplan
Whethertoenabledialplan
line
Settheline
Page 46/62
TPX820 User Manual
Figurenumber
Fill in the expression of the graph, the grammar of the
(expression)
numberofwords
Select the number of match action figure,Denyrepresents
the home gateway will refuse to match the number
dialed,Dial Outrepresents the home gateway allows
Features
outgoingmatchingnumbers
Moveup
Moveup
Movedown
Movedown
5.4.2 Add a Dial plan
① enable dial plan;
② click to increase, then the page will jump to the above chart;
③ fill in the relevant parameters;
④ click OK to set the end;
⑤ Click Save to confirm the changes and restart the home gateway to make the
changes take effect.
5.4.3 Digitmap rules
No. character
description
1
0123456789*# Legalcharacters
2
X
Lowercaseletterxmatchesanycharacteralegitimate
Matchasequence.E.g.:
♦[0-9]:matchesanyofthenumbers0to9
3
[Sequence]
♦[23-5*]:matchingcharactersor2or3or4or5*
Matchx,xx,xxx,xxxx,etc.  E.g.:
4
X
"01."matches"0","01","011"......"011111......"
5

Forexample: <#: 23%> xx<#: 23%>,# 56 #is
input,theoutputis23%5623%
Afterenteringthe"x"willbetheendofthedialtone,
enter"y"afterthedialtone.
E.g.<5:><:
241
333>
810158
101for
theinput,output2413338101.In
additionIP601input5will
6
X,y
T
a
dial
tone,
time.IP601willallocate
valid
dial8afterstopping
Set
7
have
the
delay
numberafter2seconds
5.4.4Call Logs
Inthispageusercanviewthereplaymenu(outgoingcalls),receivedcalls
andmissedcalls.
Page 48/62
TPX820 User Manual
(1)Rediallist
(2)AnsweredCalls
(3)MissedCalls
Page 49/62
TPX820 User Manual
6.Security
Inthispageyoucanfiltersettings,contentfiltering.
6.1 IP/MAC/PORT Filtering
parametername
description
Enablefiltering
Whethertoturnonfiltering
Defaultpolicy
Maychoosetogiveuporaccept
Page 50/62
TPX820 User Manual
MacAddress
AddMacaddressfilteringrequired
DestinationIPaddress DestinationIPaddress
SourceIPaddress
SourceIPaddress
Select
protocol
the
name
of
the
protocol,
supportTCP,UDPandTCP&UDP
The
purposePortInterval
Destinationportrange
SourcePortsection
Sourceportrange
behavior
Youcanchoosetoreceiveorgiveup
Annotations
Theannotationoftheaddedcontent
delete
Deletetheselecteditem
cancel
Cancelthesettings
Page 51/62
TPX820 User Manual
6.2
Content Filtering
Page 52/62
TPX820 User Manual
basicsettings
description
Enablefiltering
Whethertoenablecontentfiltering
Thedefaultpolicyistoacceptordisablefiltering
Defaultpolicy
rules
WebsURLfiltering
description
URLfilterlistthecurrent
system
URLfilteringrulesthatalreadyexist(blacklist)
Youcanchoosetodeleteorcancelanexisting
Delete/Cancel
filteringrule
AddaURLFilter
AddURLfilteringrules
Add/Cancel
ClickAddorCancel
WebsHostFilterSettings
description
CurrentWebsiteHostFilters Alreadyexistingkeywords(blacklist)
Youcanchoosetodeleteorcancelanexisting
Delete/Cancel
keyword
AddaHostFilter(Keyword)
Addkeywords
Delete/Cancel
ClickAddorCancel
7.Application
YoucansetadvancedNat,UPnP,IGMP,DMS,MLDinthispage.
Page 53/62
TPX820 User Manual
8.Administration
In this page you can manage your home gateway, home gateway
users to set the time / date, password, web login, the system logs,
andTR069relatedconfiguration.
8.1 Management
In his page, users can manage the home gateway time / date,
password,restorefactoryandsoon.
8.1.1Config File Upload & Download
Page 54/62
TPX820 User Manual
parametername
description
Upload:ClickBrowse,selectthefilelocally,presstheUpload
Configurationfile
buttontostartuploadingthefile
uploadand
Download:ClickDownload,thenselectthepathtostart
download
downloadingtheconfigurationfile
Dialingrulesfile
ClickBrowse,selectthefilelocally,presstheUploadbuttonto
upload
startuploadingthefile
8.1.2 Administrator
Settings
parametername
description
usertype
Therearetwolevelsofadministrator,ordinaryusers
newusername
Youcanmodifytheusername,setanewusername
newpassword
Addanewusernameforthepassword
confirmpassword
Addanewpasswordagain
Language
ThereareChinese,English,Russian,Finnish,Spanish,canbe
Page 55/62
TPX820 User Manual
selected,Webpagescorrespondingchangeswilloccur
RemoteWebLog
WhethertoenableremoteWebLog
PortsettingsusedforloggingonviatheInternetport
Webport
andPCport,thedefaultvalueof80
Setthenetworkidletimeoutinminutes.Ifthenetworkidle
WebIdleTimeout
timeoutwithoutanyoperation,thepageautomaticallylogoff
RemoteTelnet
Whethertoenableremotetelnetlogin
Telnetport
Setstheportnumberbyloggingontotheremotetelnet
8.1.3 NTP settings
parametername
description
NTPswitch
WhetherNTPisenabled
currenttime
Showcurrenttime
NTPsettings
Setthetimezone
PrimaryNTPserver IPaddressordomainnameofchoiceforNTPserver
From
theNTPserver
IPaddressordomainnameserveralternateNTP
NTPSynchronizati
NTPsynchronousperiod,whenthecyclelengthmaybeany
on
oneof1to1,440minutes,thedefaultsettingis60minutes
Page 56/62
TPX820 User Manual
8.1.4 System Log Settings
parametername
Systemlogenable
description
Whethertoenablethesystemlogfunction
Select
the
system
log
level,
there
levelsINFOandDebug,Debugwhichcanget
Systemloglevel
informationthanINFO
Remotesystemlog
enable
Whethertoenableremotesystemlogging
Remotesystemlog
server
AddtheremoteserverIPaddress
8.1.5 Packet Trace
Page 57/62
aretwo
more
TPX820 User Manual
Theusercanusethemessagetrackingfunctiontointerceptsent
packets.ClicktheStartbuttontostartthedatatrackingandkeep
refreshingthepageuntilthemessagetrackingisdisplayedas
stopped.ClicktheSavebuttontosavethecapturedpacket.
8.1.6 Factory Default
Click Factory Default to reset everything back to factory status. Reboot required.
8.2 Firmware Management
parametername
description
Upgradetype
Temporarilyonlychoosetoupgradethesoftware
Selectthelocalupgradefile,andthenclickUpgrade
Localupgrade
toupgradethesoftware
Page 58/62
TPX820 User Manual
8.3 TR069
parametername
description
TR069Enable
TR069isenabled
WhethertoenableTR069(newversiondoesnot
CWMP
havethisparameter)
ACSURL
ACSURLaddress
UserName
ACSusername
Password
ACSPassword
Regularnotifications Whethertoopenthecyclenotificationfunction,the
areenabled
defaultisopen
Regularlynotifythe
timeinterval
Periodicnotificationinterval,s,default43200s
UserName
TR069serverusernametoconnecttotheDUT
Password
TR069serverisconnectedtotheDUTpassword
SSLKey
FillSSLkey
Page 59/62
TPX820 User Manual
8.4 Provision
TPX820supporttodelivertheconfigurationhttp/https/tftp,
firmwareupgradesandotheroperations.
parametername
description
ProvisionEnable
Whethertoenableprovision.
Synchronousreset
DIV378rebootwhethertore-enablesync
Synchronousrandom
Setsthemaximumdelayrequestto
delay
synchronizefiles,thedefaultis40
Ifthelastfailedresynchronizationisin
Synchronization
the"ResyncErrorRetryDelayafter"
period(sec)
time,G201N4willretrythe
Page 60/62
TPX820 User Manual
resynchronization,thedefault
is3600seconds.
Synchronizationerror
Settingthetimingresynchronization,the
retrydelay
defaultvalueis3600seconds.
Ifitistimetore-sync,butG201N4isbusy,
inwhichcase,G201N4willwaitforsome
time,thelongestwas"forcedtore-sync
delay"defaultsto14400s,aftera
Forcesyncdelay(sec)
time,G201N4willbeforcedtore-sync.
Resynchronizationafter Afterresynchronization,iffirmwareupdate
upgrade
featureisenabled,thedefaultistoenable
ResyncFromSIP
WhetherfromtheSIPresynchronization
Itisonlyusedmodespecifiedwithinthe
company.WhenusingTFTPand
options66Whenimplementing
configuration,theusermustIP542Nenter
thecorrectprofilenameofthepage.When
youdisabletheoption66,thisargument
Option66
doesnotwork.
Profilename
Profilename
ProfileURL
ProfileRule
Notethatthespecifiedfilepathisrelative
Page 61/62
TPX820 User Manual
totheTFTPserver'srootdirectory.
8.5 Diagnosis
Thispageisbasedonnetworkconnectionstatus.
8.5.1 Ping Test
UseICMPprotocoltotestnetworkconnectivity.
8.5.2 Traceroute
Usetracertcanviewtheroutingnodesinthenetwork.
Page 62/62

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 0357
Create Date                     : 2017:08:10 09:19:24+08:00
Modify Date                     : 2017:08:10 09:19:24+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - TPX820 User Manual v1.0.docx
Creator                         : 0357
Document ID                     : uuid:b2f9c4ad-9461-4669-abb6-930d57b2af80
Instance ID                     : uuid:34307ce2-32a4-47b8-a4d5-a40409bac2a5
Page Count                      : 62

EXIF Metadata provided by EXIF.tools