Teletronics 11-136 802.11b WLAN Card User Manual

Download:
Mirror Download [FCC.gov]
Document ID	398630
Application ID	s6SEZ3MjAVztveTcoNIP8Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.74kB (134205 bits)
Date Submitted	2004-02-24 00:00:00
Date Available	2004-02-24 00:00:00
Creation Date	2004-02-11 13:50:53
Producing Software	Acrobat PDFWriter 5.0 for Windows NT
Document Lastmod	0000-00-00 00:00:00
Document Title	11Mbps WIRELESS LAN Card User QSG Manual_020304.doc
Document Creator	11Mbps WIRELESS LAN Card User QSG Manual_020304 - Microsoft Word
Document Author:	marklee

11Mbps WIRELESS LAN Card
Quick Start Guide
11-136
No part of this documentation may be reproduced in any form or by any means or used to make any
derivative work (such as translation, transformation, or adaptation) without written permission from
the copyright owner.
All the other trademarks and registered trademarks are the property of their respective owners.
Statement of Conditions
We may make improvements or changes in the product described in this documentation at any time. The
information regarding to the product in this manual are subject to change without notice.
We assume no responsibility for errors contained herein or for direct, indirect, special, incidental, or
consequential damages with the furnishing, performance, or use of this manual or equipment supplied with it,
even if the suppliers have been advised of the possibility of such damages.
Electronic Emission Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC INFORMATION
The Federal Communication Commission Radio Frequency Interference Statement includes the following
paragraph:
The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communication. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to overcome the interference by one or more of
the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
The equipment is for home or office use.
IMPORTANT NOTE
Following RF exposure info shall be supplied in end-users manual depends on the application.
For mobile configuration RF Exposure Information:
To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile
Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter
For Laptop Configuration RF Exposure information:
This device has been tested for compliance with FCC RF Exposure (SAR) limits in the typical laptop computer
configuration and this device can be used in desktop or laptop computers with side mounted PCMCIA slots.
This device cannot be used with handheld PDAs (personal digital assistants).
This device and its antenna must not be co-located or operated in conjunction with any other antenna or
transmitter.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
R&TTE Compliance Statement
This equipment complies with all the requirements of the Directive 1999/5/EC of the European parliament and
the council of 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual
recognition of their conformity(R&TTE).
The R&TTE Directive repeals and replaces in the directive 98/13/EEC. As of April 8, 2000.
1. Introductions:
The 11Mbps WIRELESS LAN Card aims to let your computer quickly and seamlessly
communicate with 802.11b (at up to 11 Mbps) networks. It allows you to configure the
Wireless LAN as both independent networks known as peer-to-peer or ad-hoc network, and
infrastructure networks . The former is suitable for small or temporary peer-to-peer
networking requirement, and the later is offering fully distributed data connectivity via micro
cells and roaming. In addition, the detachable antenna design allows the Card to apply
more applications.
Ad-Hoc Network Configuration
Infrastructure Network Configuration
Internet
Access Point
Printer
Wired Network
2. Installation Procedures :
1.
2.
Insert the 11Mbps WIRELESS LAN Card to your computer’s PCMCIA slot.
The Found New Hardware message box will appear once the system detected the
insertion of the Card. Click Cancel to ignore it.
3.
Put the supplied CD-ROM into your CD-ROM drive, and the startup window will appear
automatically. If it does not, double click the Autorun.exe icon in the CD’s directory to
awake the Setup Wizard manually.
4. In the startup window, click Install Driver to start the installation.
5. Click Next in the Welcome to the InsterShield Wizard dialog box to continue. And the
system will start to copy the drivers found.
6. Windows XP system will then send out a warning message box. Because the device
has been tested to work with Windows system without problem, click Continue
Anyway to ignore it.
7.
On the Install Finished screen, click Finish to complete the installation. Note that
when you are running Win98/98SE/ME, the computer will be restarted automatically
after you click the Finish button.
Note: For Win98 users, the system will ask for Win98 CD -ROM after rebooting. Please
replace the supplied CD with the required one and click OK to proceed.
8.
Then, you shall see the status icon of the Configuration Tool appeared in the system
tray, and the installation is entirely finished at the moment. Double-click the icon to
launch the PRISM Wireless Settings dialog box, in which you may freely arrange your
network connection afterwards.
Windows is a registered trademark of Microsoft Corporation. All other trademarks and brand names
are the property of their respective proprietors.
Appendix: Specifications
Product Name
11Mbps WIRELESS LAN Card
Host Interface
PCMCIA PC Card PRISM 3.0
Dimensions
111.3 x 54 x 5 mm
Weight
36g
Frequency Band
2.400 ~ 2.4835GHz (subject to local regulations)
11 channels (US, Canada); 13 channels (ETSI); 4 channels (France); 14
channels (Japan)
Number of Channel
Operating Voltage
3.3V ± 5% (5V is also available)
Current Consumption
Typ. 280mA, Max. 350mA
Spreading
DSSS (Direct Sequence Spread Spectrum)
Data Rate
11Mbps, 5.5Mbps, 2Mbps, 1Mbps
Transmit Power
22± 1 dBm @ Nominal Temp Range
Receive Sensitivity
Nominal Temp Range: 11 Mbps @ -84 dBm, Typical
Modulation
11Mbps and 5.5Mbps CCK; 2Mbps: DQPSK;1Mbps: DBPSK;
Security
64 bit WEP Encryption (Optional: 128 bit)
Antenna
Support External Antenna (MMCX Conn. is optional)
Supplied Driver
Windows 95/98/98SE/2K/ME/NT4.0/XP, Linux.
Standards
IEEE 802.11b, Wi-Fi compliant
Media Access Protocol
CSMA/CA with ACK
Warranty
1 year
Temperature Range
0~55°C (Operating), -20~70°C (Storage)
Humidity
Max. 95% Non -condensing
Open Space: 100 – 300m; Indoor: 30m – 100m
The transmission speed varies in the surrounding environment.
Full mobility and seamless roaming from cell to cell and across access
points
Operating Range
Roaming
Network Protocol
TCP/IP, IPX, NetBEUI
Management Utility
Link Configuration for network join and diagnostics
EMC Certification
FCC
Packaging
Customer Define
CIS
Customer Define

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 6
Creator                         : 11Mbps WIRELESS LAN Card User QSG Manual_020304 - Microsoft Word
Create Date                     : 2004:02:11 13:50:53
Title                           : 11Mbps WIRELESS LAN Card User QSG Manual_020304.doc
Author                          : marklee
Producer                        : Acrobat PDFWriter 5.0 for Windows NT

EXIF Metadata provided by EXIF.tools