Telit Communications S p A BG864 Gateway Bluetooth – 802.15.4 User Manual GG864 BG864 Conformity Assessment Issues
Telit Communications S.p.A. Gateway Bluetooth – 802.15.4 GG864 BG864 Conformity Assessment Issues
Contents
- 1. User Manual
- 2. User Manual II
User Manual II
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1688947 |
| Application ID | f7cFKFad5ia67j8IaHJRUw== |
| Document Description | User Manual II |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 1.44kB (18001 bits) |
| Date Submitted | 2012-05-03 00:00:00 |
| Date Available | 2012-10-30 00:00:00 |
| Creation Date | 2012-05-03 12:46:54 |
| Producing Software | GPL Ghostscript 9.0 |
| Document Lastmod | 2012-05-03 12:46:54 |
| Document Title | GG864_BG864_Conformity_Assessment_Issues |
| Document Creator | PDFCreator Version 1.2.0 |
| Document Author: | kerai-vi |
Conformity assessment issues – GG864-2.4 FCC/IC Regulatory notices Modification statement Telit has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. Telit n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature. Tout changement ou modification peuvent annuler le droit d’utilisation de l’appareil par l’utilisateur. Interference statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Wireless notice This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. The antenna should be installed and operated with minimum distance of 20 cm between the radiator and your body. Antenna gain must be below: GSM 850: 7 dBi PCS 1900: 3.90 dBi 802.15.4 (2.4 GHz): 2.2 dBi (Dipole antenna) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC pour un environnement non contrôlé. L'antenne doit être installé de façon à garder une distance minimale de 20 centimètres entre la source de rayonnements et votre corps. Gain de l'antenne doit être ci-dessous: GSM 850/FDD V: 7 dBi PCS 1900/FDD II: 3.90 dBi 802.15.4 (2.4 GHz): 2.2 dBi (antenne dipôle) L'émetteur ne doit pas être colocalisé ni fonctionner conjointement avec à autre antenne ou autre émetteur. FCC Class B digital device notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Conformity assessment issues – BG864-2.4 FCC/IC Regulatory notices Modification statement Telit has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. Telit n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature. Tout changement ou modification peuvent annuler le droit d’utilisation de l’appareil par l’utilisateur. Interference statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Wireless notice This product emits radio frequency energy, but the radiated output power of this device is far below the FCC and IC frequency exposure limits. This equipment complies with FCC and IC RF radiation exposure limits forth for an uncontrolled environment. Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized. Ce produit émet energie de radio fréquence, mais la puissance de sortie rayonnée de l’équipement est assez inferieur aux limites de fréquences d’exposition établie par la IC. Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC pour un environnement non contrôlé. Cependant, le produit devrait être utilisé de telle manière que le potentiel contact humain avec l’antenne durant une utilisation normale soit minime. FCC Class B digital device notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 3 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 355ce748-9771-11e1-0000-f37985b95cdb Producer : GPL Ghostscript 9.0 Keywords : () Modify Date : 2012:05:03 12:46:54+01:00 Create Date : 2012:05:03 12:46:54+01:00 Creator Tool : PDFCreator Version 1.2.0 Document ID : 355ce748-9771-11e1-0000-f37985b95cdb Format : application/pdf Title : GG864_BG864_Conformity_Assessment_Issues Creator : kerai-vi Description : () Author : kerai-vi Subject :EXIF Metadata provided by EXIF.tools