Telson Information and Communications Co PA1021 14 Channel Family Radio Services User Manual MANUAL

Telson Information and Communications Co Ltd 14 Channel Family Radio Services MANUAL

Contents

User Manual

Bellsouth feature listGeneral Feature14 Channel 38 CTCSS16 Step Digital Up/Down Volume Control with Level Display with BeepChannel Select Up/Down Button with Beep4 Digit LCD Display for ChannelAudible Low Battery Warning beep with LCD blinkingBattery levelKey LockTX LED (RED) indicatorAAA x 4 Battery operationOver 2 Miles500mW output powerOver 30hours operationChannel Scan operation Tone Scan operation Light operation VoxKey Assignment1. PTT2. Monitor3. Menu4. Single Audible Beep Call5. Power On/Off6. Up for Volume & Channel change7. Down for Volume & Channel change8. Light / Key Lock9. ScanFeature DescriptionPower OnThe radio begins operation with beep tone by pressing and holding button for 1000msec andLED back light is illuminated for 6 second simultaneously and the LCD displays all ICONsto check the screen for 100msecPower OFFPress and hold the Power Key for 2000msec. Then the units is off with long audible Beep(800Hz)
Bellsouth feature listPTTPTT Button company following functions.- Get user to talk by the button.Return to basic mode from Programmable CH/Tone change modeExternal PTTThe set could transmit by External PTT keyPTT TransmissionPress the PTT key for transmission, speak slowly and clearly in a normal voice about 2 ~ 3 inchs awayfrom microphone the radio transmits the signal and TX LED (RED) is on at the moment. If release thePTT key, it stops transmitting and returns to stand-by condition in order to receive signalCall FunctionPress and release the Call key to transmit an audible Call Tone. The unit rings for 1200msec.The unit automatically returns to receive/stand-by mode when the Call transmission is over.ReceiveThe unit begins message reception with speaker open when correct signal is received.Channel SelectChannel digits are firstly blinking when menu button is pressed once. Then Press up ordown key to a desired key to a desired channel, while in channel selection mode back light ison and channel digits keep blinkingThe release of channel selecting mode is operated by one of following key function.1. Menu ,2. PTT, 3. Call,4. Time out ( after 4sec) ,5. Lamp/key Lock. LCD back light is on inchannel select mode, then it return to stand-by condition.The selected channel is retained and recalled when the unit is turned off and on evenbattery is replaced. Pressing Up/Down key for 200msec, it checks existence of carrier asrepeat modeChannel listChannel Frequency Channel Frequency1462.5625MHz 8467.5625MHz2462.5875MHz 9467.5775MHz3462.6125MHz 10 467.6125MHz4462.6375MHz 11 467.6375MHz5462.6625MHz 12 467.6625MHz6462.6875MHz 13 467.6875MHz7462.7125MHz 14 467.7125MHz
Bellsouth feature listTone selectPress the Menu button two times. The tone digits are blinking and then press up anddown key to a wanted tone. The release of tone selecting mode is to press one of following.1. Menu, 2. PTT, 3. Call, 4. Time out (after 4sec ), 5.Lamp/Key Lock. It returns to stand-by condition.When the radio is power off and on again , the selected tone is recalled. If press and holdUp/Down key for 200msec, tone changes upward or downward repeatedly.Volume controlThe volume of radio is controlled by Up/Down button on normal modeThe Up button increases the volume from level 1 to level 16, and Down button decreasesfrom level 16 to level 1. Other functions of the volume button is following.- Pressing the Up/Down button for 200msec more, it operates as Repeat mode.- The volume level is recalled even after replacing battery of power off. VOX functionThe function is replacing for PTT key to transmit by the voice signal through MicPress the menu button three times. The VOX icon is blinking on LCD.and then OFF digitsappears.Press the Up/Down button to control the VOX level from off to 3. VOX OFF means VOXreleasePress the Menu key to set the VOX , and then VOX icon appears on LCD.If press and hold Up/Down button for 1sec more, it operates as Repeat mode The VOX mode is recalled even after replacing battery of power off.The release of VOX is to press the Menu Key for above 2 secMonitor/Light Key functionThe Monitor Key operates as followings- turns the monitor On/Off- continuous monitor mode onNormal Monitor ModePressing Monitor key, the channel status is checked and audio is always open whetherexistence of carrier or not. To release the Key, audio is muted and it turns to stand-by mode.Continuous Monitor Mode.Pressing Monitor Button for 3 sec, the set begins to be continuous monitor mode with SingleBeepPressing Monitor Button again or call/PTT key to release continuous monitor mode.
Bellsouth feature listBack light ON/OffPressing Light /Key lock Button for 3sec, the LCD light is on 6 sec and then offautomatically. It turns to off (on) in on (off) status.Key Lock On/OffIf press Light/Key lock button above 3sec, Key icon on LCD is displayed and set up Lockkey on Option. And if press Light/key lock button above 3sec, Key icon on LCD isdisappeared and set up Lock Key On Option. It is stored also in replacing Battery.Channel ScanChannel icon is blinking as a result of pressing the Menu Button one time, then press Scanbutton, channel scan is set up. It is released by pressing Scan in that situation. Channel Scan function1. Check the receiving carrier at intervals of 200ms. with the increase of channel2. Tone is not operated in Scanning3. As receive the channel, bar is blinking in 500msec steps.4. As soon as completion receiving, go back to 1 item after waiting for 4 sec5. Pressing PTT while operating 1 item, the channel, which set up before scan option,transmit. After waiting the transmitted channel for 4sec, go back to 1 item.6. If transmit within 4sec after completion receiving, the received channel istransmitted and Channel Scan option is released.Tone Scan Tone icon is blinking by pressing the Menu Button two times, then press Scan Button,ToneScan is set up. It is released by pressing Tone status in that situation.Tone Scan function1. Check the receiving carrier at intervals of 200ms with the increase of Tone.2. As receive the channel, Bar is blinking in 500msec intervals.3. As soon as completion receiving, go back to 1 item after waiting for 4sec.4. Pressing PTT while operating 1 item, The tone, which set up scan option, transmitbefore. After waiting the transmitted Tone for 4sec, go back to 1 item.5. If transmit within 4 sec after completion receiving, the received tone istransmitted and Tone Scan Option is released.Low battery Detect The radio is displaying the level after reading the battery status regularly in operating. When indicate Low battery ,limit the part of operation with warning beep simultaneouslyand turn to emergency mode like following contents prohibit the transmission in case oflevel1. Battery icon is blinking in 0.5sec steps, but even then it is possible to receiveLEVEL 0 : below 4.0V be to transmit after Blinking & BeepLEVEL 2 : 6~4.8V
Bellsouth feature listPower SavingSo as to maximize battery life, Power Saving Mode is automatically activated in 3sec afterevery transmission and reception like following operation The beginning of power saving is following. The 3sec process of Power On The 3sec process of stopping transmission. The 3sec process of stopping receiving The release of Power Saving is following Transmission Receiving ( Carrier Detect ) Monitor OperationError IndicationIf it should occur error situation which impossible of TX/RX, the radio make beep tone of 1sec intervals.NOTICE TO USERSThe users manual or instruction manual shall include the following statement:Warning: Adjustment to this unit or replacement of any transmitter component(crystal,semiconductor, etc.) to this unit that could result in a violation of the rules.NOTE; This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful Interference in a residential installation. This equipment generates, usersand can radiate radio frequency energy and, if not installed and used in accordance with theinstruction, may cause harmful interference to radio communication.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isneeded.Consult the dealer or an experienced radio/TV technician for help.If shielded cables or special accessories are required for compliance, a statement must be includedwhich instructs the user to employ them, eg.Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
Bellsouth feature list

Navigation menu