Telson Information and Communications Co PH1061 14 Channel Family Radio Services User Manual MANUAL

Telson Information and Communications Co Ltd 14 Channel Family Radio Services MANUAL

Contents

User Manual

Bellsouth feature listGeneral Feature14 Channel NO CTCSSFM Radio stereo/mono sounds8 Step Digital Up/Down Volume Control with Level Display with BeepChannel Select Up/Down Button with Beep4 Digit LCD Display for Channel / FM frequencyAudible Low Battery Warning beep with LCD blinkingKey LockTX LED (RED) indicatorAAA x 4 Battery operationOver 2 Miles500mW output powerOver 30hours operationScan operation FM Radio Seek operation Light operationKey Assignment1. PTT2. Monitor3. Menu4. Single Audible Beep Call5. Power On/Off6. Up for Volume & Channel change7. Down for Volume & Channel change8. Light / Key Lock9. ScanFeature DescriptionStartWhen changing batteries, start mode become Power OFF automaticallyIn start mode, channel and volume become Default Value ( CH 1, Volume 5 )Power OnPower OnPress and hold the POWER key for (1.5) seconds to power on with Beep and LCD will beon. It is in the RX Stand-by Mode. Back-light displays for (5) seconds.Power OPower OFFFF
Bellsouth feature listPress and hold the Power Key for (0.5) seconds to power-off with Beep at the RX StandbyMode.FUNCTION KEYSTAGE 0 : VOLUME CHANGESTAGE 1 : CHANNEL CHANGE - Press the fuction( menu) key for (0.5) second one time- Normal Mode : FRS CH CHANGE- FM Channel Mode : FRS CH CHANGE Press the function key for 2 seconds one timeSTAGE 2 : VOX MODE ON / OFF Press the funtion key for (0.5) second twiceDeactivate Menu Mode1. Menu Button Push2. PTT Key Push3. Call Key Push4. Time Out5. Scan Key PushMenu Mode STAGE 0 Press the UP/DOWN key to control the volume in Normal Mode Volume control1. Press the Up/Down key to increase /decrease the volume level from level 1 to level 82. For Repeat Mode Press the Up/Down key for more than (1.0) seconds3. when level 1 and level 8, generate Volume Limit Message Beep4. Each time increase/decrease 2 level, 2 icon become On/Off at the same timeMenu Mode Stage 11) Press and hold the Menu button one time for Channel Change Mode.While the current channel is blinking about 10 seconds - Press the Up/Down key to change channel -The channel is changed from 1 to 14 or from 14 to 1 repeatedly. - For Repeat Mode Press the Up/Down key for more than (1.0) seconds. 2) In FM Mode(FM ICON ON) Press and hold the Menu button one time for above 1 secWhile the FM indicate Icon is blinking about 10 seconds - Press the menu key one time to tune the radio frequency - while the FM and MHz icon is blinking Press the Up/Down key to tune the radio frequency. - In case radio manual tuning, radio channel increase/decrease at intervals of 0.2 MHzMenu Mode Stage 21) Press the Menu button twice for VOX Setting ModeWhile VOX icon is blinking about 10 seconds,
Bellsouth feature list - Press the Up/Down key to control the VOX Mode setting - The level indicate L3,L2,L1,OFF - When LCD indicate OFF, if press the Down key , generate Limit Message BeepPTTPTT1. Press To Talk2. Return from Program CHPTT PTT FunctionFunction1. Press to Talk2. Return from channel change mode3. Return from VOX setting modeEXTERNAL PTTEXTERNAL PTTTransmit without using PTT Key as below1. External Speaker Mike2. External VOX OnINTERNAL VOXINTERNAL VOXWhen Internal VOX Mode is on,VOX Sensibility level is controlled from 1 to 3 by Menu KeyWhile VOX Mode is on , VOX Icon is indicated on LCDCall FunctionCall FunctionPress and release the Call key for about (3) seconds to transmit an audible Call Tone. Theunit rings automatically returns to receive/stand-by mode when the Call transmission isover.When call operation, all key is not operated except of Power KeyMonitor FunctionMonitor FunctionMonitor Key is operated as below1. Monitor On/Off2. Continuous Monitor Mode On/Off3. Scan Skip Function- NORMAL MONITOR MODE During pressing the Monitor key, Audio is On and RX Icon appears on the LCD. Release
Bellsouth feature listthe key to return to Stand-by Mode and Audio will be muted.- CONTINUOUS MONITOR MODE Press the Monitor key for more than (3) seconds, Continuous Monitor Mode will beoperated with Single Beep as BUSY(RX Icon appears on the LCD) To release the Continuous Monitor Mode press the Monitor key twice as well as pressingthe PTT or Call key.- In Monitor Mode channel and volume can be adjusted. - Scan Skip Function When an active signal is detected, But communication is not desired, press the monitorbutton to bypass the channel and to continue scan.Back Light On/OffBack Light On/OffPress the Light Key shortly to light up the LCD display. The lamp will go out after (5)seconds.Key lock On/OffKey lock On/OffPress the Light Key long till the Key Lock symbol is on the LCDVolume and Channel Change is disabled during Key Lock Mode.Press the Light Key same manner again to release Key Lock Mode.Scan FunctionScan FunctionThe Scan activity is working in an endless channel loop from 1 to 14Press Scan Key to activate channel scan1. check the detected channel by the 200msec2. Scan Icon symbol is on the LCD.3. Resume time keeps for 4 seconds4. When an active signal is detected , Scan is paused keeping the active signalbroadcasted.Operate PTT or external PTT . then Scan is stopped ant the active channelLow battery DetectLow battery DetectWhen the battery level is low, the battery icon will flash to indicate that the batteries needto be replacedPower SavingPower SavingThe purpose of Power Saving is to maximize battery life.
Bellsouth feature listPower Saving StartPower Saving Startü After Power On (3) seconds elapse ü After stop transmitting (3) seconds elapseü After stop receiving (3) seconds elapsePower SavingPower Saving releasing releasingü Transmissionü Receiving(Carrier Detect)ü Monitor Operationü FM ModeFM RADIO MODEFM RADIO MODEPress and hold menu button one time for above 1 sec to On/Off FM mode.1. Volume controlPress the Up/Down Key to control the volume.Not generate Volume Beep and limit warning Beep2. Channel controlIn FM Mode, With press the Menu Key to appear the FM Icon on the LCD as blinkingfor (10) Seconds. Press the Up/Down Key to control the desired Channel. Press the Scan Key to start the Radio Frequency Seek function. When an active signal is detected, Scan is paused keeping the active signal broadcasted. Press the Scan Key to pause the Seek Mode.NOTICE TO USERSThe users manual or instruction manual shall include the following statement:Warning: Adjustment to this unit or replacement of any transmitter component(crystal,semiconductor, etc.) to this unit that could result in a violation of the rules.NOTE; This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful Interference in a residential installation. This equipment generates, usersand can radiate radio frequency energy and, if not installed and used in accordance with theinstruction, may cause harmful interference to radio communication.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try to correct the interference by oneor more of the following measures:
Bellsouth feature listReorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isneeded.Consult the dealer or an experienced radio/TV technician for help.If shielded cables or special accessories are required for compliance, a statement must be includedwhich instructs the user to employ them, eg.Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

Navigation menu