8
PC INTERFACE ADDENDUM Operating Uniden SportCat 5050 Scanner with Add-on PC Interface The modified SportCat with PC interface has been enhanced by the addition of an add~in board that manages the PC to Scanner connection. This interface along with appropriate PC software allows all too memories of the $6150 to be programmed or re-programmed as desired. The add-in board has two modes of operation. when the scanner is turned on with a cable connected between the scanner and PC the add-in board enters PROGRAMMING MODE and the PC interface circuitry remains active allowing the scanner to be programmed from the PC. If the scanner is turned with no cable PC interface cable attached the add-in board enters POWER SAVE MODE which turns off the PC interface circuitry to conserve battery power. PROGRAMMING THE SCANNER USING THE PC INTERFACE Turn Scanner OFF. Connect PC hterface cable between scanner and PCs serial port. Tum scanner ON. Select 'BANK' mode on the scanner using the keypad. Follawhstrucfionshdudedwithyoursottwareta programttuscanner. > Select 'HOLD' mode on scanner using the keypad. > Turn scanner OFF. Disconnect PC interface cable. IMPORTANT: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (I) This device may not cause harmful interferuioe, and (2) this device must accept any interference received. including interference that may cause undesired operation. FCC ID: DJ7-150—1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:06:30 14:27:16 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:06:30 14:27:17-04:00 Page Count : 1EXIF Metadata provided by EXIF.tools