Ten Tec 526 2-6 Meter Scanning RX/TX User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	143409
Application ID	jMypeIS+Yh2u7avLHBAKgA==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.11kB (426370 bits)
Date Submitted	2001-04-05 00:00:00
Date Available	2001-04-05 00:00:00
Creation Date	2001-03-20 14:22:52
Producing Software	Hewlett-Packard Intelligent Scanning Technology 3
Document Lastmod	2001-03-20 14:34:13
Document Title	users manual
Document Author:	rutherfoe [ SCANNER ]

"Il'o'll'
Ten-Tec
OPERATOR’ S
MANUAL
Model 526-7
2m/6m DSP
Transceiver
Preliminary Draft
PE ATI
ENERAL
MODES: cw. m. um. um
mmumcv was: sun mi 14444: Mil: Mn 116-174 mm mvn.
DISPLAY: 7 um um. for main ma mid-q DUAL Wm win. syn-rm
own-r TUNTNG: u. m m: mauve
m 112mm 0mm;
whim-"41m. Mmbl-i‘oroddqfliu
cross: mum m mly,
MBMORil-‘s: loo
ANTENNA: sou-umh-JMup-mso-mempmmrummzm
rowan REQUlRED: IA receive. 6A Inn-nil @ Iz-N vnc
mnmucnou:
4 epoxy du- pc m
man-m ml
uni-“mm
lump-ind ml up w beam».
DIMENSIONS: awn 1.75- x u- x 1.13“ (1 x 2 LG x 22.1 cm)
mums
RF ovrruT. mo vans, Aw mun-1
MICROPHONE mm
no in 50k nim-
4 pa. hm panel m
mmiawhmuwilh!mv(67dfl)uflpm
Nuiudvollnppmvidndunicjlckfwem
T/R SWITCHING: m an $55. QSK wl CW.
METERING: rowan! W
SSB GENERATION: DC? [mailed
mm
SENHmVI'mlN-nlypiulfnf lodBS+NfN®l4kthlndwifllsSBM
SHLECI'IVITY: Mfihm built/in; 2004000 Hzin 50 Him 1000-1le ‘m [00 "1 new.
NOXSE FIGURE: 74!
S-ME’I'ER: Cam.“ in 50 nvn SJ
I-F FREQUENCY”: ll ”3 45 NHL 1nd H1 450 Hi). Jul H7 14.5 kHz
Terr-Tet Model 526 FCC ID: 017—526
This device compiles with Part 15 0! the FCC Rules.
Operaxlon is subject to the ioiluwlnq two conditions:
(I) this device may not cause harmful Interference.
and (z) (hls device must accept any Interference
I ll Ten~ch,Inc. 2 PartNo. 74272
The Ten—Tea model 526 is an All-Mode 2 meter and 6 meter
transceiver with lF-DSP technology. The digitized IF is processed
by a programmable DSP. All user interfaceand signal processing
functions are performed in firmware. DSP processing allows the
model 526 to provide All-Mode operation, multiple IF bandwidths
and Tx/Rx timing in a compact package. In addition, the model 526
provides a low-level signal interface for connection to UHF or
microwave transverrers,
Conventional VHF FM functions are provided for normal
or odd repeater splits, channel memories and CTCSS encodeand
Memory~Scan with channel-lockout. Seperate Antenna connectors
for 6 and 2 meters makes band hopping quick and simple. Seperatc
Tx control signals are provided [or each hand for easy connection
to external amplifiers.
For SSB/CW enthusiasts the model 526 dual VFOs which
can be operated in Split mode, RIT control and silky-smooth QSK.
Band-Scan when used with the All-Mode squelch makes finding
band activity quick and easy.
' Main Frequency
Signal Strength! Display RlT/Auxillary
Forward Power N_ Display
Meter Status »7 7 '
\\ Indicators
-— 7— vii-Jain Tuning i fii
Power/ Encoder ‘ Volumd
MIC Gain ‘ KIT/Auxiliary Squelch
Encoder
OPERATIONAL CONTROLS
MODE
PrsaIng the MODE bunon wales through moan. Prudnu FUNC MODE
was In rwarsu order. MODE is global. chaining BANDS do“ not enact
MODE.
NB
Pruning NB mp- bmeen VFO-A and VFO—B
VFOI hive laperate froquancy and mode.
A=B
Pruning Ne copiel ma content- of VFO-A Into VFO—B.
SPLIT
Prat-Ina SPLIT weds lpfit nperllion. Rx on VP“ and Tx on VFO~B. SPLIT
work- crou-b-ndlcrolymode.
BAND
Pruning BAND lowla- between 2 mmu and 6 mmeur
BW
In CWIUSBILSEI, toggle- Mar bundem sdocflnn dbpluy onion. In FM,
toggles nub (one sdecfion display onlcll and may“ tubuudibla tone enIoII. In
CW, FUNC EW rogue- lldotono frequency “Icahn display onIoII. In CW,
FUNC VIM omen 1d lIdmns Isvd' mods.
RIT
In CWIUSBILSB, tom RIT Iroquoncy dIophy onion. Hold RIT Ior 1 no to
flour RIT dhplay m mm In FM, remmu May to 'SHIFT" selecflun.
SHIFT b 4/4 SDDKHZ and 1MHz on 8 meters and OI-GOOKHz an 2,
TUNING RATE
FUNC SPLIT loggin- bflwun M lnd slow Iunlnq rake-r DIspIay w: briefly
dad-y FAS or SLO nceorfinw
I.“ Ten-Tee, Inc, 4 Part No, 74272
MEM
VIM fragme- between VFO nnd MEM mode, and nope I lean.
orrer encoder IcroIIe IIunee) Ihrounn memonee.
Emmy memorIee are muted and appear as ‘—-.—-.—-.'
W lend. l memory to ma current VFO and returnl to VFO mode.
FUNC SKIP mam '-' lock character Icr current memory.
FUNC W ere“- memory. Held-W on powenrp emes el memories.
W In mem mode undt memory In VFO.
W In VFO mode pull redo In WRITING‘ mode. Scroll through memoriee
then press w e second firm to write In We selected memory Press VIM i! you
wbh to abort the memory write.
SCAN
MS key is Comer MEM scan or FREQ wen dependlng on VFOIMEM made
In MEM mode, MS mm a mlrnury seen; In VFO mode, Irequency ecen.
SqueIcn mun be dosed for redo In wen: open equdch mp5 scan unm
squelch doses lgeIn. Ollie! encoder knob changes wen drection. In frequency
ecln. FAST/SLOW me netting and mode effect scan weed.
Connuh fipley nI Nolu Blanket "Bing. A Setting oI zero turn- Ihe Nor-e
Blanker OFF.
LOCK
Locks the meIn lunlng encoder. Prwems InedvenanI tuning.
ATTENUATOR
FUNC PS wade the Anenuelor onloII. (There Is no Inflicator hr the 81318 a! the
attenuator.
FRONT PANEL CONNECTIONS
Microphone
The Ten-Tec standard 4-pin MIC jack accomodates a low
impedance microphone and provides a polarizing voltage of +9
VDC to power an electret micophone, Any Ten-Tee microphone,
using our 4-pin connector, works without changetPlease refer to
the following figure then adapting other microphones for use with
the Model 526.
Phones
This is a standard jack used for connecting 8-ohm stereo or mono
headphones. However, because dropping resistors reduce the
output to headphone level, this jack cannot provide sufiient audio
to drive an external speaker,
I.“ Ten-Tee, Inc, 6 Part No, 74272
REAR PANEL CONNECTIONS
13.8 VDC Supply
The Model 526 requires a requlated 13.8 volt supply capable of
providing a current of 7.5 amps
2 Meter Antenna/6 Meter Antenna
Connection should be made to appropriate antennas using standard
PL—259 connectors
Fun
A Mini Blade 7.5 amp filse. Replacemnts are available at most
automitive parts suppliers.
KEY/m (Input)
A CW Keyer or external PTT signal may be connected to the
Model 526. The transmitter is activated by a low (ground) signal
on this input.
Audio ln/Audio Out
The audio In/Out connections are provided to allow the Model 526
to be attached to mama] devices such as Modems or TNC's
XVTR Out
Low level RF output at the tuned frequency. Can be used to con-
nect the Model 526 to transverters requiring Iow~|evel RF driver
2M Amp
Amplifier Key signal (or use with external 2M amplifier.
6M Amp
Amplifier Key signal for use with external 6M amplifier.
£)QE|— an
$99.19- ,, u u
Ten-Te: Model 526 FCC ID: 017-525
Thls device compiles with Part 15 or the FCC Rules.
Operatlnn ls subject to the following two conditions:
(1) IMS device may not cause harmful Interference.
and (2) ml; devlce must accept any Interference
I ll Ten-TeanQ 8 Part No. 74272

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Producer                        : Hewlett-Packard Intelligent Scanning Technology.3
Author                          : rutherfoe [ SCANNER ]
Create Date                     : 2001:03:20 14:22:52
Modify Date                     : 2001:03:20 14:34:13-05:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools