Tesla 1089775 Fascia Endpoint User Manual Owners guide

Tesla Motors, Inc Fascia Endpoint Owners guide

User Manual

Two Types of KeysInstead of a traditional key or key fob, Model 3supports two types of keys:•Key card - communicates with Model 3using short range radio-frequencyidentification (RFID) signals. Allows you tounlock, drive, and lock Model 3 by tappingthe key card against a Model 3 RFIDtransmitter.Note: The key card is necessary to allow,or "authenticate", a smart phone to workwith Model 3. It is also considered abackup key in case your authenticatedsmart phone runs out of battery power, oris lost or stolen.•Authenticated smart phone -communicates with Model 3 usingBluetooth. Supports automatic lockingand unlocking, driving, as well as multipleother functions using the Model 3 mobileapp. An authenticated smart phone is thepreferred key because you never need toremove it from your pocket or purse.Each type of key is detailed below.Caution: Remember to bring both yourkey card and authenticated smart phonewith you whenever you drive Model 3.Key CardTesla provides you with two Model 3 keycards, designed to fit in your wallet. The keycard identifies you as a vehicle owner andcommunicates with Model 3 using RFIDtransmitters located under the driverassistance camera on the driver's side doorpillar and behind the cup holders on thecenter console. The key card communicateswith the transmitters within a short range ofapproximately one or two inches. Keep this inmind when expecting Model 3 to recognize it.You will also need your key card toauthenticate a smart phone (see Authenticating your Smart Phone on page7).To use the key card to unlock Model 3, brieflytap it against the hidden RFID transmitterlocated below the driver assistance camera onthe driver's side door pillar. When Model 3detects the key card, exterior lights flashtwice, mirrors unfold (if Mirror Auto Fold ison), and doors unlock.Once inside Model 3, you can drive away if youpower up within 15 seconds by pressing thebrake pedal (see Starting and Powering O onpage 37). If you wait more than 15 secondsbefore powering up, your authenticationperiod expires. To re-authenticate yourself,place the key card near the hidden RFIDtransmitter behind the cup holders on thecenter console so that Model 3 can detect it.Once your key card is detected, your 15-second authentication period restarts.Note: It is important that you position the keycard within an inch or two of an RFIDtransmitter to allow Model 3 to read it. Youmay need to physically touch the centerconsole or driver's side door pillar with the keycard for the RFID transmitter to detect it andyou may need to hold it against thetransmitter for one or two seconds.Note: The Walk Away Lock and Walk UpUnlock features operate only when using anauthenticated smart phone. When you walk upto/away from Model 3 carrying only your keycard, Model 3 does not automatically unlock/lock even if these features are turned on (see Model 3 Keys6 Model 3 Owner's Manual
Walk Away Lock on page 10 and Walk UpUnlock on page 10).Caution: It is a good idea to always carryyour key card with you in your purse orwallet to use as a backup in case yourauthenticated smart phone runs out ofbattery power, or is lost or stolen.Authenticating your Smart PhoneOnce authenticated, your smart phone is themost convenient way to access your Model 3because you never need to remove it fromyour pocket or purse. With Walk Up Unlockand Walk Away Lock enabled (see Walk UpUnlock on page 10 and Walk Away Lock onpage 10). Model 3 detects the Bluetoothsignal as you approach and doorsautomatically unlock. When you exit thevehicle and walk away, Model 3 no longerdetects the Bluetooth signal and the doorsautomatically lock.Follow these steps to authenticate your smartphone:1. Ensure that your smart phone's Bluetoothsetting is turned on.Note: Model 3 communicates with yoursmart phone using Bluetooth. Toauthenticate your phone or use it as a key,the phone must be powered on andBluetooth must be enabled. Keep in mindthat your phone must have sucientbattery power to run Bluetooth—on manyphones, Bluetooth is disabled as batterypower approaches very low levels).2. Download the Model 3 mobile app to yoursmart phone.3. Log into the mobile app using your MYTESLA user name and password.Note: You must remain logged in to yourMY TESLA account on the Model 3 mobileapp to use your smart phone to accessModel 3. The mobile app can be running inthe background.4. Touch the <TBD> button on the Model 3mobile app.When the mobile app detects your Model3, it displays a message asking you to scanthe key card.5. Scan your key card on the door pillar (see Key Card on page 6).When you have successfully scanned a validkey card, the mobile app displays a messageindicating that your smart phone has beensuccessfully authenticated.If the key card is not successfully scannedwithin approximately 15 seconds, the mobileapp displays an error message. Touch themobile app's <TBD> button again to retry.Note: You can authenticate up to three smartphones. Model 3 always automaticallyconnects to the first authenticated phone itdetects; no authenticated phone takesprecedence over another.Note: Although Bluetooth typically supportscommunication over distances of up toapproximately 30 feet (9 meters),performance can vary based on the smartphone you are using, environmentalinterference, etc.Note: In addition to smart phones, you canalso pair Bluetooth-enabled devices (such asan iPod Touch, iPad, Android tablet, etc.) tostream music (see Pairing a Bluetooth Phoneon page 94).Forgetting an Authenticated SmartPhoneIn situations where you no longer want yoursmart phone to access Model 3 (for example,your smart phone is lost or stolen), contactTesla support to disable the Model 3 mobileapp. If you have access to your smart phoneand you no longer want the smart phone to beused as a key to your Model 3, simply deletethe Model 3 mobile app from the phone usingthe same method you use to delete any otherapp. Once the mobile app is removed, thephone can no longer be used to lock, unlock,or drive Model 3.Model 3 Mobile AppIn addition to allowing you to use your smartphone as your Model 3 key, the mobile appallows you to:• Lock or unlock Model 3 from afar.• Check charging progress and receivenotifications when charging has started,has been interrupted, or is complete.• Heat or cool Model 3 before driving (evenif it's in a garage).• Locate Model 3 with directions, or track itsmovement across a map.• Flash the exterior lights or honk the hornto find Model 3 when parked.• Start Model 3 remotely.• Park or unpark Model 3 using Summon(see Using Summon on page 73).Model 3 KeysOpening and Closing 7
• Receive notifications when the car alarmhas been triggered.• Receive notifications when a vehiclesoftware update is available or scheduled(see Software Updates on page 106).Note: To take advantage of new and improvedfeatures, download updated versions of themobile app as they become available.Note: Tesla does not support the use of thirdparty applications to contact Model 3.Model 3 Keys8 Model 3 Owner's Manual
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. CAN ICES-3 (B)/NMB-3(B)

Navigation menu