Texecom PRESTIGE-DT Motion Sensor for Security Alarm System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	862973
Application ID	3zwuS0X2yBG7R/XDIFHACA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.61kB (820149 bits)
Date Submitted	2007-11-01 00:00:00
Date Available	2007-11-01 00:00:00
Creation Date	2007-06-29 11:37:25
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2007-06-29 11:37:58
Document Title	Users Manual
Document Creator	Adobe InDesign CS2 (4.0.5)

PHYSICAL
ENVIRONMENTAL
1.6”
(40mm)
Professional Dual Technology Detector
I N S TA L L AT I O N I N S T R U C T I O N S
6oz (170g) approx.
4.4”
(112.25mm)
-31°F (-35°C) to +140°F (+60°C)
0.1” (2.5mm) ABS
INS 332
2.4”
(60mm)
www.texe.com
-31°F (-35°C) to +135°F (+55°C)
Ask your distributor today for the Texecom full colour Product Guide.
LATCH INPUT FUNCTIONS
MW
ALARM
STANDARDS & APPROVALS
UL Standard:
UL639 Intrusion Detection Unit.
EU Detector Standard:
Independently Certified to TS 50131-2-4 Grade
2 Environmental Class II.
EU System Standard:
Suitable for use in a PD 6662/BS EN 50131-1
Grade 2 system. Environmental Class II.
EMC:
Independently Certified to EN 50130-4 : 1996.
A1 : 1998, A2 : 2003.
RF Immunity:
No false alarms from 80MHz to 2GHz at 10V/m.
Complies with BS EN 61000-4-3 : 2002.
Electrostatic Discharge:
No false alarms up to 8kV.
Complies with BS EN 61000-4-2 : 1995.
Fast Transient Immunity:
No false alarms up to ±4kV.
Complies with BS EN 61000-4-4 : 1995.
High Energy Transient
Immunity:
No false alarms up to ±2kV.
Complies with BS EN 61000-4-5 : 1995.
Conducted RF
Susceptibility:
No false alarms at 10Vrms.
Complies with BS EN 61000-4-6 : 1996.
Conducted & Radiated
Emissions:
Complies with EN 55022 Class B.
EN 61000-6-3 : 2001, A11 : 2004
Product Identifier:
DT.
PIR
DO NOT TOUCH
✗
The latch terminal (see Section 5) can perform several different functions
depending on how it is connected:
Cer tificate Number: FM 35285
Made In England
WARRANTY
10 year replacement warranty.
The Prestige DT is designed to detect the movement of an intruder and activate
an alarm control panel. As the Prestige DT is not a complete alarm
system, but only a part thereof, Texecom cannot accept responsibility or liability for
any damages whatsoever based on a claim that the Prestige DT failed to
function correctly.
Due to our policy of continuous improvement Texecom reserves the right to
change specification without prior notice. All specifications are measured at 68ºF
(20ºC).
PULSE COUNT
Latch connected to Set Positive (SW+, Set+): The LEDs will be disabled while
the system is set. Any detectors triggered while the system is set will indicate
this by permanently lighting the alarm LED (upon unsetting the system).
Detectors can be reset by taking the latch line high and then low again.
Latch connected to Alarm Positive (AL+, A+ve): The first detector activated
while the system is set will indicate this with a slowly flashing alarm LED
(upon unsetting the system). Detectors activated subsequently will indicate
this by permanently lighting the alarm LED. Detectors can be reset by taking
the latch line high and then low again.
This equipment may be operated
in the following countries:
10.525GHz: BEL, CYP,  DNK, GRC, HUN, IRL,
ITA, LVA, LTU, LUX, MLT, NLD, POL, ROU, SVN, ESP,  SWE, ISL, CAN, USA
✗
LED OFF
JP1
VR1
2m
6'7"
JP1
MIN
5m
16'4"
2m
6'7"
JP2
MID
2m
6'7"
FCC ID: MYJPRESTIGE-DT
© 2007 Texecom Ltd. The Prestige DT is protected by UK & International Registered Designs. Registered Design No’s:
3004997, 3004260 & 3004261. Prestige is a trademark of Texecom Ltd.
FCC NOTICE
LED ON
ANGLING THE DETECTOR
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced Radio/TV technician for help.
Changes or modifications not expressly approved by Texecom Limited could void the
user's authority to operate this equipment.
IC Notice:  
This Class B digital apparatus complies with the Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à l'ICES-003 Canadien.
✓
MAX
JP2
MOUNTING HEIGHT AND
SETTINGS
9’10”/3.0m
8’2”/2.5m
6’7”/2.0m
4’11”/1.5m
15m
50'
ALTERING COVERAGE AT 6'7"/2m
MOUNTING HEIGHT
9
CONFIGURING SENSITIVITY &
TESTING
50’
15m
10 COVERAGE PATTERN
11
Volumetric
MOUNTING THE PRESTIGE DT
12
MOUNTING THE PRESTIGE DT
For indoor use only
Mount on a stable surface
90º
✓
✗
50’
15m
Select the appropriate pulse count and microwave range for the intended installation with JP1
and VR1 and enable the LEDs with JP2.  Replace the cover, apply power to the detector and
wait 1 minute for the warm-up period to complete.  
With the area free of people, walk through the desired protected area and ensure that the
detector operates correctly. Ensure that all the detector LEDs illuminate and that the relay
contacts open to signal an alarm.
As the absolute range of PIR detectors can vary with ambient temperature, background and
clothing type, ensure that the most likely intruder routes are well within the detectors range
and walktesting is carried out along these routes. The LEDs may be disabled after testing.
Ensure changes in the installation environment do not affect the detectors field of view.
13 WIRING
        Do not run cable parallel to mains wiring
✓
14 CHOOSING A LOCATION
15 HOW TO REMOVE THE CHASSIS 16 DETECTOR KNOCKOUTS
Avoid common false alarm sources
✗
✗
✗
✗
✗
✗
<3'3"/1m
✗
INS 332
✗
18 WALL MOUNT BRACKET
✗
110V
230V
110V
230V
Remove chassis before mounting the detector
17 CEILING MOUNT BRACKET
✓
✓
✓
See Mounting Height Diagram (Section 7)
In North America the Prestige DT must be connected to a UL (USA or CSA-Canada)
approved power supply, current limited to its rated value, capable of providing at
least 26mA per Prestige DT at 12VDC nominal (9-16VDC range), and capable of
providing 4 hours minimum standby power.
Installation in the USA must comply with National Electrical Code, NFPA70.
Installation in Canada must comply with Canadian Electrical Code Part 1.
✗
✗
Seal all holes
✓

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1.1-111
Instance ID                     : uuid:cdcfab49-262c-11dc-949a-0003938d58a4
Document ID                     : adobe:docid:indd:c8c196b3-27b4-11dc-b814-e2916aac8048
Rendition Class                 : proof:pdf
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:6F693181C31F11DB8570FC994566F76E, uuid:7825BA3C217211DCB4D4EAAEB3BE8339, uuid:4D89F82261C211DB9315C30EA8EE2925, uuid:6F69317EC31F11DB8570FC994566F76E, uuid:6F69317EC31F11DB8570FC994566F76E, uuid:6F69317CC31F11DB8570FC994566F76E, uuid:06EA0DDBC31E11DB8570FC994566F76E, uuid:06EA0DDDC31E11DB8570FC994566F76E, uuid:6F69317CC31F11DB8570FC994566F76E, uuid:06EA0DDBC31E11DB8570FC994566F76E, uuid:06EA0DDDC31E11DB8570FC994566F76E, uuid:06EA0DDBC31E11DB8570FC994566F76E, uuid:06EA0DD7C31E11DB8570FC994566F76E, uuid:7AD86C7B5F6211DB9CE4AFE09E3300BC, uuid:EE0BADD1C26A11DBAA0FA92DB5AE7656, uuid:1E7AC394C32811DB8570FC994566F76E, uuid:EE0BADD7C26A11DBAA0FA92DB5AE7656, uuid:EE0BADD9C26A11DBAA0FA92DB5AE7656
Manifest Reference Document ID  : uuid:6F69317FC31F11DB8570FC994566F76E, uuid:7825BA3B217211DCB4D4EAAEB3BE8339, uuid:3621DBEF29E511DBB2D88820E7B31E58, uuid:6F69317DC31F11DB8570FC994566F76E, uuid:6F69317DC31F11DB8570FC994566F76E, uuid:06EA0DDEC31E11DB8570FC994566F76E, uuid:06EA0DD8C31E11DB8570FC994566F76E, uuid:06EA0DDCC31E11DB8570FC994566F76E, uuid:06EA0DDEC31E11DB8570FC994566F76E, uuid:06EA0DD8C31E11DB8570FC994566F76E, uuid:06EA0DDCC31E11DB8570FC994566F76E, uuid:06EA0DD8C31E11DB8570FC994566F76E, uuid:06EA0DD5C31E11DB8570FC994566F76E, adobe:docid:photoshop:dd4b0244-381a-11da-9af8-eb657eeb8601, uuid:EE0BADD0C26A11DBAA0FA92DB5AE7656, uuid:6F693182C31F11DB8570FC994566F76E, uuid:EE0BADD6C26A11DBAA0FA92DB5AE7656, uuid:EE0BADD8C26A11DBAA0FA92DB5AE7656
Create Date                     : 2007:06:29 11:37:25+01:00
Modify Date                     : 2007:06:29 11:37:58+01:00
Metadata Date                   : 2007:06:29 11:37:58+01:00
Creator Tool                    : Adobe InDesign CS2 (4.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 10780 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0.5)

EXIF Metadata provided by EXIF.tools