Thales ATM ILS420LOC ILS LOCALIZER STATION User Manual UserMan ILS420LOC

Download:
Mirror Download [FCC.gov]
Document ID	1077038
Application ID	f69lj5i1ftSAUI0Hv3KuLA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.52kB (56560 bits)
Date Submitted	2009-03-05 00:00:00
Date Available	2009-03-06 00:00:00
Creation Date	2009-02-18 15:03:31
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-02-18 15:03:31
Document Title	Microsoft Word - UserMan ILS420LOC
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Scot

NSN XXX-XXX-XXX-XXX
704749-0300
INSTRUCTION BOOK
ILS 420
LOCALIZER STATION
SINGLE FREQUENCY
SINGLE EQUIPMENT PART NUMBER 098782
TYPE FA-XXXX
DUAL FREQUENCY
DUAL EQUIPMENT PART NUMBER 098783
TYPE FA-XXXX
CONTRACT DTFAWA-05-C-00058
THALES ATM Inc.
23501 W. 84th STREET
SHAWNEE, KANSAS 66227
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
27 FEBRUARY 2008
THALES
INSTRUCTION
BOOK
INSTRUCTION BOOK
DRAFT
ILS 420 LOCALIZER STATION
SINGLE FREQUENCY
SINGLE EQUIPMENT PART NUMBER 098782
DUAL FREQUENCY
DUAL EQUIPMENT PART NUMBER 098783
MANUAL NO. 704749-0300
These data are submitted with limited rights under Government Contract DTFAWA-05-C-00058. These data may be
reproduced and used by the Government with the express limitation that they will not, without written permission of the
Contractor, be used for purposes of manufacture nor disclosed outside the Government; except that the Government may
disclose these data outside the Government for the following purposes, if any, provided that the Government makes such
disclosure subject to prohibition against further use and disclosure: Permitting government employees or government support
contractors to install, operate, or maintain ILS 420 equipment and software and to conduct training.
This Notice shall be marked on any reproduction of these data, in whole or in part.
Copyright 2007 THALES
Revision A.5
27 February 2008
Single/Dual Frequency – Localizer
ILS 420 – Warranty
- WARRANTY -
THALES warrants all equipment manufactured by it to be free from defects in material and workmanship,
provided the equipment is operated under normal ratings and service for which it is intended. The obligations of
the company shall be limited to making good at the factory, or at authorized repair and service facility of
THALES, any part or parts thereof which shall by its inspection and test be found defective, provided these parts
are returned prepaid to the company within one (1) year after delivery to the customer. All material being returned
to THALES through Customs should show Customs Clearance at the Port of destination.
THALES is not liable for any damage or personnel injury resulting directly or indirectly from the design,
material, workmanship, or installation of any of its products.
This warranty is in lieu of all other warranties, expressed or implied, and does not apply to any equipment which
has been subject to unauthorized repair or alteration.
THALES neither assumes nor authorizes any person to assume for it any other liability in connection with its
products.
THALES reserves the right to make modifications and alterations to its products without obligation to install such
improvements at no charge in equipment theretofore manufactured.
- TECHNICAL SUPPORT AND ORDERING REPLACEMENT PARTS For technical support and information on how to order replacement parts, contact your equipment provider listed
below.
Thales
23501 West 84th Street
Shawnee, Kansas 66227 USA
Tel: +1 913 422-2600
Fax: +1 913 422-2962
27 February 2008
LIST OF EFFECTIVE PAGES
INSERT LATEST CHANGED PAGES. DESTROY SUPERSEDED PAGES.
TOTAL NUMBER OF PAGES IN THIS PUBLICATION IS 420
Rev. A 15 September 2004
Rev. A.1 28 October 2004
Rev. A.2 15 June 2007 per ECN 02965
Rev. A.3 1 October 2007 per ECN 02965
Rev. A.4 30 November 2007 per ECN 02965
Rev. A.5 27 February 2008 per ECN 02965 (will be rev. B)
Page
No.
*Change
No.
Title .............................................. A.5
Warranty ...................................... A.5
A................................................... A.5
B Blank ........................................ A.5
i ................................................... A.5
ii Blank ........................................ A.5
iii - iv............................................ A.5
^i - viii .......................................... A.5
1-1 - 1-19 ..................................... A.5
1-20 Blank ................................... A.5
^i - iv ............................................ A.5
2-1 - 2-63 ..................................... A.5
2-64 Blank ................................... A.5
^i - ii ............................................. A.5
3-1 - 3-26 ..................................... A.5
^i................................................... A.5
^ii Blank....................................... A.5
4-1 - 4-3 ....................................... A.5
4-4 Blank ..................................... A.5
^i................................................... A.5
^ii Blank....................................... A.5
5-1 - 5-2 ....................................... A.5
^i - ii ............................................. A.5
6-1 - 6-50 ..................................... A.5
Page
No.
*Change
No.
Page
No.
*Change
No.
^i - ii ............................................. A.5
7-1 - 7-54 ..................................... A.5
^i................................................... A.5
ii Blank......................................... A.5
8-1 - 8-11 ..................................... A.5
8-12 Blank ................................... A.5
^i – iii ........................................... A.5
^iv Blank ...................................... A.5
9-1 - 9-62 ..................................... A.5
^i................................................... A.5
^ii Blank....................................... A.5
10-1 - 10-11 ................................. A.5
10-12 Blank ................................. A.5
^i - ii ............................................. A.5
11-1 .............................................. A.5
11-2 Blank ................................... A.5
11-3 - 11-63 ................................. A.5
11-64 Blank ................................. A.5
A-1 - A-9...................................... A.5
A-10 Blank .................................. A.5
*A in this column indicates an original page.
^Section Table of Contents
27 February 2008
List of Effective Pages
A/B
Single/Dual Frequency – Localizer
ILS 420 – Table of Contents
SECTION TABLE OF CONTENTS
For a complete Table of Contents for each section, please refer to the section.
Section 1
General Information and Requirements
Section 2
Technical Description
Section 3
Operation
Section 4
Standards and Tolerances
Section 5
Periodic Maintenance
Section 6
Maintenance Procedures
Section 7
Corrective Maintenance
Section 8
Parts List
Section 9
Installation
Section 10
Computer Software
Section 11
Diagrams
Appendix A
Abbreviations/Acronyms
27 February 2008
i/ii
Single/Dual Frequency – Localizer
ILS 420 – Introduction
INTRODUCTION
The Equipment
The Instrument Landing System (ILS) 420 localizer station was developed according to Federal Aviation
Administration (FAA) and International Civil Aviation Organization (ICAO) requirements and includes the
localizer station and installation kit.
NOTICE: This equipment has been Type Accepted by the FCC (FCC ID BOJ420LOC) and changes or
modifications not expressly approved by Thales may void the user’s authority to operate this equipment.
The Manual
This manual provides information needed to install, operate, and maintain the Thales ILS 420 localizer station. It
is assumed that anyone using this book to operate the equipment has a thorough understanding of ILS and that
anyone using it to maintain the equipment has graduated from the THALES ILS 420 localizer training course or
has met required FAA training.
Line-Replaceable Unit Maintenance Strategy
This manual supports a line-replaceable unit (LRU) maintenance strategy that simplifies onsite maintenance and
minimizes downtime and life-cycle costs. With the LRU strategy, onsite technicians only need to know how to
use the equipment’s built-in diagnostics to identify faulty assemblies and how to replace them. The faulty
assemblies are sent to THALES or another authorized depot for repair.
This strategy keeps the equipment in service, limits the time, skill, and equipment needs of onsite personnel, and
limits assembly level diagnosis, repair, and testing to those facilities with the highly specialized equipment and
technicians required to do it efficiently.
Sections
SECTION 1. GENERAL INFORMATION AND REQUIREMENTS. This section describes the equipment,
its purpose, physical specifications and requirements, and the interrelationships of the equipment in the group.
SECTION 2. THEORY OF OPERATIONTECHNICAL DESCRIPTION. This section will help you
understand how the whole system works and how its subsystems interrelate. It will also give you the perspective
you will need to do broad troubleshooting when fault isolation procedures are not enough. It covers only those
LRUs and other parts that can be replaced onsite and describes their inputs, outputs, and controls.
SECTION 3. OPERATION. This section tells you how to operate the equipment and includes controls and
indicators, operating procedures, and a screen-by-screen explanation of how to control and monitor the equipment
with a portable maintenance data terminal (PMDT the local control panel (LCP).
SECTION 4. STANDARDS AND TOLERANCES. This section lists the standards, tolerances, and parameters
of the equipment in the group.
SECTION 5. PERIODIC MAINTENANCE. This section tells you how and when to check and maintain the
equipment to make sure it is always performing at its peak.
SECTION 6. MAINTENANCE PROCEDURES. This section tells you how to maintain the equipment.
27 February 2008
iii
ILS 420 – Introduction
Single/Dual Frequency – Localizer
SECTION 7. CORRECTIVE MAINTENANCE. This section shows you how to troubleshoot, test, and adjust,
and troubleshoot the equipment and lists recommended test equipment. It also provides onsite LRU replacement
procedures. for all of the LRUs in the system.
SECTION 8. PARTS LIST. This section lists those assemblies and parts that can be replaced onsite. When
you have identified a faulty LRU, this section is where you will find the information you will need to order a
replacement.
SECTION 9. INSTALLATION. This section tells you how to install, setup, and adjust the system for optimum
performance.
SECTION 10. COMPUTER SOFTWARE. This section lists and describes the software used in the ILS 420.
equipment. When it is not applicable, it is omitted, as it has been here.
SECTION 11. TROUBLESHOOTING SUPPORT DATA. This section contains the schematicsinterconnect
drawings, wiring diagrams, assembly drawings, and other drawings that support the other sections.
APPENDIX A. This appendix lists and defines the abbreviations used in the manual and is included in each
manual and volume.
Single and Dual Frequency Equipment Coverage
This manual covers the dual equipment, dual frequency and the single equipment, single frequency
configurations.
iv
27 February 2008

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:02:18 15:03:31-06:00
Create Date                     : 2009:02:18 15:03:31-06:00
Format                          : application/pdf
Title                           : Microsoft Word - UserMan ILS420LOC
Creator                         : Scot
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:215ce69b-fc48-4003-a57e-e0852a26d99c
Instance ID                     : uuid:6e06f09f-81de-471c-b42d-a34ac95470c5
Page Count                      : 12
Author                          : Scot

EXIF Metadata provided by EXIF.tools