The Hablab ApS KLKKIT2 Klikkit button User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4046166
Application ID	mT69iWa3uvR1Cjf6SMannA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.69kB (71116 bits)
Date Submitted	2018-10-24 00:00:00
Date Available	2018-10-24 00:00:00
Creation Date	2018-07-27 09:16:52
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-07-27 09:16:53
Document Title	User Manual
Document Creator	Adobe InDesign CC 13.1 (Macintosh)

Thank you for buying the Klikkit Buttons.
The Klikkit Buttons can help you make any habit
or activity stick in your daily routines. You simply
need to follow the instructions below to get started. The Klikkit Buttons and app is designed to help
and motivate you to get rid of your bad habits and
strengthen your positive habits.
In the app, you can configure schedules and goals
to fit your habit and you can set alarms and reminders. The button itself can notify you if you have
forgotten, or are about to forget, an important task.
USER GUIDE
What’s in the box
System requirements
How to set up your Klikkit button(s)
How to use Klikkit
Troubleshooting
Safety Warning
Disclaimer
FCC Caution
IC Caution
CE Caution
Warranty
p2
p2
p2
p2
p3
p5
p6
p6
p7
p8
p8
1. What’s in the box
Inside this box you will find:
• Klikkit Button(s)
• Extra double adhesive
2. System requirements
To set up your Klikkit Buttons you will need an Android or iPhone device with at least Android 5.0 or
iOS 9.1. The device also needs to support Bluetooth.
3. How to set up your Klikkit Buttons
3.1 Install the Klikkit app
Visit the App Store or Google Play, and download
the Klikkit app onto your iPhone or Android device.
Open the app and follow the instructions.
3.2 Pair your button(s)
If it is your first button, press ‘Get Started’ and follow the instructions to pair your first button. The
button will light up green once pairing is successful. All other buttons can be paired to a new activity
or to an existing activity in the ‘Activities’ menu.
4. How to use Klikkit
The Klikkit is designed to help you track a habit and
make it stick. You simply need to click the button
every time you do the activity. Follow these steps:
• Create an activity in the Klikkit app
• Associate the button with the habit or activity
- e.g.your dental floss box or your box of vitamins
• Make a schedule in the Klikkit app
• Click the button every time you do the activity
4.1 How to create an activity
• In the app, go to the ‘Activities’ menu and press
‘Add New Activity’
• Connect the button that you wish to use by following the instructions on the screen
4.2 How to make a schedule
• Click on the activity in the ‘Activities’ menu that
you wish to make a schedule for
• Press ‘Add Schedule’
• Define the frequency and the goals of your
activity
• Define the reminders and alarms
4.3 Attach the button on a product associated
to an activity
Use the double adhesive stickers to attach the button to the product you use. If the activity you want
to track and improve does not require a product, it
is recommended to place the button in a place you
are familiar with.
5. Troubleshooting
If you are having trouble connecting or setting up
the system, please find the frequently asked questions below. If your issue is not described, then find
the full FAQ on www.justklikkit.com.
5.1 How do I change the battery?
The Klikkit Button comes with a pre-installed battery - and it is ready to use.
If you need to change the battery, remove the silicone ring. Turn the battery door counter clockwise
and separate the battery door from the button.
Place the battery in the button with the positive side
facing up toward you. Place the battery door on the
button and turn clockwise to close it again. Put the
silicone ring back on. It is not needed to pair the
button again.
5.2 The Klikkit app and Klikkit Button(s) will not
connect. What should I do?
Make sure that the Klikkit button has a fully
charged battery and that it is installed correctly. To
test this, click the Klikkit Button. If it does not light
up, then install a fully charged battery as described
in 5.1. Also, make sure that your device has Bluetooth turned on. Try to click again. If the button still
does not work, then try to turn Bluetooth off and
then on. If it still does not work, try a hard reset, see
5.3 or contact the customer support on support@
justklikkit.com
5.3 I would like to reset my button(s) completely. How do I do that?
Press and hold the button for at least 10 seconds.
When the Klikkit button is reset it will flash red
twice. Be aware that a button reset deletes all
stored clicks.
5.4 How do I use my Klikkit Buttons with the
Klikkit Hub?
The Klikkit Hub (sold seperately) and app will automatically collect clicks from your Klikkit Buttons
assigned to an activity. If you experience problems,
make sure that the Klikkit Hub is installed correctly
and has access to your Wi-Fi network.
5.5 The Klikkit Button flashes and sounds.
What does that mean?
The Klikkit Button uses specific lights and sounds
patterns to indicate actions:
• A click followed by a short beep and a green
light indicates that the click has been registered.
• If you set up the button schedule reminders in
the app, it will beep and light up every 10-20
seconds for 1,5 minutes.
• If the button keeps flashing red, it indicates
that an error has occured. Go in the Klikkit
app and navigate to ‘Settings’ menu and find
‘Paired Buttons’ screen. Drag down on the
screen to synchronise your buttons with your
device. The app will tell which error has occurred and how to handle it.
6. Safety Warning
• If the Klikkit Buttons or any accessories is
damaged upon receipt, it should not be used.
Please contact customer service.
• Do not submerge in water or use in damp environments.
• The Klikkit Buttons should under no circumstances be disassembled, modified or altered
in any way other than to change battery.
• Do not dispose of in fire or heat above 60oC.
• Keep the Klikkit Buttons and its batteries out
of reach of children under the age of 5 years
old.
• The Klikkit Buttons should only be handled by
individuals over the age of 18 years old.
7. Disclaimer
The HabLab ApS assumes no liability:
• In case the Klikkit Button is not used or stored
as described in the guide, or
• For outcome or use of any product or service
of which a Klikkit Button is used for.
Please note, that any and all use of Klikkit,
not-withstanding that it is used as described, does
not constitute medical advice and should not be relied upon as such.
8. FCC Caution
§ 15.19 Labelxling requirements
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) this device must accept any interference received, including interference that may cause undesired operation.
§ 15.21 Information to user
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
§ 15.105 Information to the user
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential in6
stallation. This equipment generates uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF
exposure requirement. The device can be used in
portable exposure condition without restriction.
9. IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le
fonctionnement.
10. CE Caution
BLE maximum power: -5.87dB. Frequency band:
Bluetooth BLE: 2402-2480 MHz (TX/RX)
11. Warranty
This Klikkit Button is warranted to be free from
defects in materials or workmanship for two years
from the date of purchase. Within this period, The
HabLab ApS will at its sole discretion, repair or replace any components that will fail in normal use.
Such repairs or replacement will be made at no
charge to the customer for parts and labor provided. The customer shall be responsible for any
transportation cost. This warranty does not apply
to: (i) cosmetic damage, such as scratches, nicks,
dents; (ii) consumable parts such as batteries, unless product damages has occurred due to a defect
in materials or workmanship; (iii) damage caused
by accident, abuse, misuse, water, flood, fire or
other acts of nature or external causes; (iv) damage
caused by service performed by anyone who is not
authorized service provider of Klikkit; or (v) dam8
age to a product that has been modified or altered
without the written permission of The HabLab ApS.
In addition, The HabLab ApS reserves the right to
refuse warranty claims against products or services that are obtained and/or used in contravention
of the laws of any country. The product is intended
to be used only as a Wi-Fi to Bluetooth access point
and must not be used in any other way. The HabLab
ApS makes no warranty as to the connection to internet and or access to server.
THE WARRANTY AND REMEDIES CONTAINED
HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING ANY LIABILITY ARISING
UNDER ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS WHICH MAY VARY
FROM STATE TO STATE.
IN NO EVENT SHALL THE KLIKKIT BE LIABLE
FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES INCLUDING WITHOUT LIMITATION, DAMAGES FOR ANY CITATIONS
WHETHER RESULTING FROM THE USE, MISUSE,
OR INABILITY TO USE THIS PRODUCT. SOME
STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
The HabLab ApS retains the exclusivity right to
repair or replace (with a new or newly-overhauled
replacement product) the device or software or
offer a full refund of the purchase price at its sole
discretion. SUCH REMEDY SHALL BE YOUR SOLE
AND EXCLUSIVE REMEDY FOR ANY BREACH OF
WARRANTY.
To obtain warranty service, contact your local Klikkit authorized dealer from whom you have bought
the device for shipping instructions and a RMA
tracking number. Securely pack the device and
copy of the original sales receipt which is requires
as the proof of purchase for the warranty repairs.
Write the tracking number clearly on the outside of
the package. Send the device, freight charges prepaid, to any Klikkit warranty service station.
Online Auction Purchases: Products purchased
through online auctions are not eligible for warranty coverage. Online auction confirmations are not
accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt
from the original retailer is required. The HabLab
ApS will not replace missing components from any
package purchased through and online auction.
Company:		
Address:		
Country:		
Model number:
Connectivity:
Power:		
Dispose as:		
Made in:		
Compatibility:
The HabLab ApS
Silkegade 8, 1113
Denmark
Klikkit Buttons vers.2
Bluetooth
CR2032 - 3v Lithium
Electronic equipment
China
Android 5.0 or later
iOS 9.1 or later
10
For the latest information about Klikkit or to purchase other products visit us online at:
www.justklikkit.com
The HabLab ApS
Silkegade 8, 1113, Denmark
support@justklikkit.com
EN – Find the extended user manual and FAQ on our website: www.
justklikkit.com. DA - Find den udvidede brugsanvisning og FAQ på
vores hjemmeside: www.justklikkit.com. ES - Encuentre el manual
de usuario ampliado y las preguntas frecuentes en nuestro sitio web:
www.justklikkit.com. IT - Puoi trovare il manuale utente e le domande
frequenti sul nostro sito web: www.justklikkit.com. FR - Accédez au
manuel d’utilisation étendu et la FAQ sur notre site Web: www.justklikkit.com. NO - Finn utvidet bruksanvisning og ofte stilte spørsmål på
vår hjemmeside: www.justklikkit.com. DE - Das erweiterte Benutzerhandbuch und FAQ finden Sie auf unserer Website: www.justklikkit.
com. PT - Encontre o manual completo do utilizador e FAQ no nosso
site: www.justklikkit.com. NL - De uitgebreide gebruikershandleiding
en veelgestelde vragen vindt u op onze website: www.justklikkit.com.
FI - Löydä laajennetut käyttöohjeet ja usein kysytyt kysymykset verkkosivuillamme: www.justklikkit.com. PL - Znajd szczegółow instrukcj
obsługi i najczciej zadawane pytania na naszej stronie internetowej:
justklikkkit.com. HU - Keresse meg a kiterjesztett használati útmutatót és GYIK-ot honlapunkon: www.justklikkit.com. RO - Gsii manualul de utilizare detaliat i lista de întrebri frecvente pe site-ul nostru:
www.justklikkit.com
Klikkit is a product and a trademark of The HabLab ApS. Apple and
the Apple logo are trademarks of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark of Apple Inc. Google Play,
the Google Play logo and AndroidTM are trademarks of Google Inc. The
Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG. All other trademarks and tradenames are properties of
their respective owners.
11
Congratulations!
You are now ready to use Klikkit to track and
improve your habits. Enjoy!
The HabLab ApS
www.justklikkit.com
Silkegade 8, 1113, Denmark
support@justklikkit.com
12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c143 79.161424, 2017/09/22-11:52:47
Create Date                     : 2018:07:27 09:16:52+02:00
Metadata Date                   : 2018:07:27 09:16:53+02:00
Modify Date                     : 2018:07:27 09:16:53+02:00
Creator Tool                    : Adobe InDesign CC 13.1 (Macintosh)
Instance ID                     : uuid:6bfafed9-18a2-8145-aab8-74e8285b4d2c
Original Document ID            : xmp.did:8f1a2172-339d-3846-9b44-634873305236
Document ID                     : xmp.id:4849499c-0dfa-410a-99fc-c07f8b080849
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:0941ec60-33e3-4f16-90f0-9c354b54675c
Derived From Document ID        : xmp.did:6de31e9f-1adb-4f03-b9d8-7d5427fc1abe
Derived From Original Document ID: xmp.did:8f1a2172-339d-3846-9b44-634873305236
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Macintosh)
History Changed                 : /
History When                    : 2018:07:27 09:16:52+02:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 12
Creator                         : Adobe InDesign CC 13.1 (Macintosh)

EXIF Metadata provided by EXIF.tools