The Sapling MOD-24G-1 2.4 GHz FHSS Transceiver User Manual
The Sapling Company, Inc 2.4 GHz FHSS Transceiver
Contents
- 1. OEM MANUAL
- 2. USER MANUAL
OEM MANUAL
OEM MANUAL November 2013 2.433-2.449 GHz Frequency Hopping Transceiver Module Model: D-CCA-MOD-24G-1 FCC ID: R73MOD-24G-1 REV 2 The Sapling Company, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 USA 215.322.6063 P. 215.322.8498 F. www.sapling-inc.com Page 2 of 7 OEM INTEGRATOR ATTESTATION a. This module is for OEM installation only. b. The OEM is responsible for ensuring that the end-user has no manual instructions to remove or install module. c. The module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). d. Separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations. e. This module may only be used with antennas with a maximum gain of 2.15 dBi, including any replacement antennas, to maintain compliance and satisfying RF exposure compliance. f. Labeling instructions of finished products must be in accordance with the requirements outlined in KDB784748 D01 v07, section 8. Page 6/7 last two paragraphs which include the required instructions; example: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1” and described herein. g. The instructions/statements required per Part 15.19 and 15.21must be included in the host user’s manual (i.e. end product). Robert A. Bongiorno Chief Engineer The Sapling Company robertb@sapling-inc.com (215) 322 – 6063 x1114 The Sapling Company, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 USA 215.322.6063 P. 215.322.8498 F. www.sapling-inc.com Page 3 of 7 Introduction This module is only authorized to be installed in fixed mount installation and may not be installed in a mobile or portable device. The MOD-24G-1 RF module is to be used in Sapling Digital Clocks such as the SBD 3000 Series Clocks and equivalent models. The module is only be connected to and installed in other Sapling products. Specifications The PCB antenna gain is +3.3Db maximum. The maximum output power will be 18 dBm. The transmit cycle is a sequence of 80 data strings on 76 different frequencies, each transmitted for 3 msec. Every transmit cycle is 240 msec in duration (80 x 3ms). The frequency hopping pattern is proprietary to Sapling and covers the range from 2.433 to 2.449 GHz. Connections The picture shows the MOD-24G-1 RF module and connector. MOD-24G-1 FCC ID: R73MOD-24G-1 J2 RF MODULE INTERFACE J2 RF MODULE INTERFACE PIN 1* RF V+ PIN 2 RF SEL PIN 3 RF CS PIN 4 PAEN PIN 5 GPO 0 PIN 6 EN PIN 7 RF GPO 2 PIN 8 HGM PIN 9 RF SO PIN 10 RF GND PIN 11 RF CLK PIN 12 RF GND PIN 13 RF SI PIN 14 RF GND * PIN 1 IS THE SQUARE PAD. The Sapling Company, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 USA 215.322.6063 P. 215.322.8498 F. www.sapling-inc.com Page 4 of 7 Installed The picture below shows the MOD-24G-1 RF module installed in a digital clock. It shows the SBL-G3S-256-1R, the connectors to the rest of the Sapling Wireless Clock System, and the FCC ID, and the Compliance Label. SBL-G3S-256-1R J2 RF MODULE INTERFACE MOD-24G-1 Antenna(s) The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5.78 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The Sapling Company, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 USA 215.322.6063 P. 215.322.8498 F. www.sapling-inc.com Page 5 of 7 SBL-G3S-256-1R MOD-24G-1 FCC ID: R73MOD-24G-1 J2 RF MODULE INTERFACE POWER & DATA J2 RF MODULE INTERFACE PIN 1* RF V+ PIN 2 RF SEL PIN 3 RF CS PIN 4 PAEN PIN 5 GPO 0 PIN 6 EN PIN 7 RF GPO 2 PIN 8 HGM PIN 9 RF SO PIN 10 RF GND PIN 11 RF CLK PIN 12 RF GND PIN 13 RF SI PIN 14 RF GND * PIN 1 IS THE SQUARE PAD. The Sapling Company, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 USA 215.322.6063 P. 215.322.8498 F. www.sapling-inc.com Page 6 of 7 SBL-G3S-256-1R Label The label below is an example of the FCC ID and the Compliance Label. Operation The MOD-24G-1 RF module will transmit the time for 240 ms and receive the time for up to 20 seconds once a minute. The Sapling Company, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 USA 215.322.6063 P. 215.322.8498 F. www.sapling-inc.com Page 7 of 7 FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. “Changes Or Modifications Not Expressly Approved By The Party Responsible For Compliance Could Void The User's Authority To Operate The Equipment.” The Sapling Company, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 USA 215.322.6063 P. 215.322.8498 F. www.sapling-inc.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : larsj Create Date : 2013:11:12 10:15:54-05:00 Modify Date : 2013:11:12 10:44:53-05:00 Language : EN-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2013:11:12 10:44:53-05:00 Creator Tool : Acrobat PDFMaker 11 for Word Document ID : uuid:4a0da4bf-9401-422b-ab55-9ff5d5d8bdcf Instance ID : uuid:d198ac77-699f-43be-b210-a78ace7c5524 Subject : 7 Format : application/pdf Title : User Manual Creator : larsj Producer : Adobe PDF Library 11.0 Source Modified : D:20131112151158 Company : Page Layout : OneColumn Page Count : 7EXIF Metadata provided by EXIF.tools