The Singing Machine SML2088 CD+G/MP3+G KARAOKE PLAYER WITH BLUETOOTH User Manual

The Singing Machine Company, Inc. CD+G/MP3+G KARAOKE PLAYER WITH BLUETOOTH

User Manual

TM
SML2088C
INSTRUCTION MANUAL/ MODE D’EMPLOI
www.singingmachine.com
The Singing Machine® is a registered trademark of The Singing Machine Co., Inc.
The Singing Machine® est une marque déposée de The Singing Machine Co., Inc.
— E1 —
Warnings
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The Caution marking is located on the bottom panel.
DANGEROUS VOLTAGE: The lightning flash with arrowhead
symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
ATTENTION: The exclamation point within an equilateral
triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying this product.
FCC WARNING: This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada Iicense-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
auxappareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage,
et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre
lefonctionnement.
DRIPPING WARNING: This product shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as vases, shall be placed
on the product.
VENTILATION WARNING: The normal ventilation of the product shall not be
impeded for intended use.
THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR CHAPTER 1,
SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURED.
Warnings:
This CD player employs a laser light beam. Only a qualified service person
should remove the cover or attempt to service this device, due to
possible eye injury.
The use of controls, adjustments, or procedures other than those
specified herein might result in hazardous radiation exposure.
• The apparatus shall be used in an open area.
CAUTION!
Invisible laser radiation when open and interlocks defeated. Avoid exposure
to beam.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The rating information is located at the bottom of the unit.
Important Safety Information
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the Manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. Do not place objects
filled with water, such as a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device
and it should remain readily accessible and operable during
intended use. In order to completely disconnect the apparatus
from power, the mains plug should be completely removed
from the AC outlet socket.
17. CAUTION: To reduce the risk of fire or explosion, do not expose
batteries to excessive heat such as sunshine, fire or other
heat sources.
CAN ICES-3(B)/NMB-3(B)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
— E2 —
Included
Please make sure the following items are included.
Wired Microphone
Main Unit
AC Adapter
Manual Audio/Video Cables
Welcome Kit
— E3 —
Location of Controls (Top/Front)
1. Handle
2. CD Compartment
3. MASTER VOLUME Control
4. ECHO + Button
5. MIC VOLUME + Button
6. POWER (ON/OFF) Button
7. SKIP/ 10+ Button
8. LIGHT MODE Button
9. ECHO – Button
10. FUNCTION Button
11. USB port
12. MIC VOLUME – Button
13. AUX IN Jack
14. Skip –/NavigationButton
15. KEY +/NavigationButton
16. Open/Close Tab
17. ENTER/Play/Pause Button
18. Skip +/NavigationButton
19. Record Button
20. Mic holders
21. PROG/REPEAT Button
22. STOP/ PAIR Button
23. KEY –/NavigationButton
24. MIC 2 Jack
25. MIC 1 Jack
26. Speaker
u
v
w
x
V
y
W
U
X
at
ak
al
am
an
ao
ap
aq
ar
as
bt
bk
bn
bl
bo
bm
bp
— E4 —
CDG
REPEAT
PLAY/PAUSE
PROGRAM
Location of Controls (Rear)
1. CDG Indicator
2. Display
3. REPEAT Indicator
4. PLAY/PAUSE Indicator
5. PROGRAM Indicator
1. Video Out Jack
2. Right Audio Out Jack
3. Left Audio Out Jack
4. DC In Jack
5. Battery Compartment
Location of Controls (Display)
u
u
x
x
y
y
v
v
w
w
— E5 —
Connection
Connecting the Microphone(s)
Microphones:
Connect a microphone into MIC jack 1 u
as well as MIC jack 2 v (when desired).
Note: Do not drop or tap the Mic as
damage to the Mic or speakers may occur.
Do not twirl the microphone by cord as it
will cause damage to the encased wiring.
Connecting the Unit to a TV
VIDEO
INPUT
AUDIO
INPUT
R L
RCA cables
VIDEO OUT
(yellow)
AUDIO OUT
(white - L
red - R)
REAR VIEW OF TV
To output the video, lyrics and
audio to your TV, perform the
following steps:
1 Connect the RCA video cable
(Yellow) to the VIDEO OUT
jack and the audio cables
(White and Red) to the
AUDIO OUT jacks located
on the back of the Singing
Machine.
2
Connect the opposite end of
the RCA video cable (Yellow)
to the VIDEO IN jack and the
audio cables (White and Red)
to the AUDIO IN on your TV.
Notes:
This unit can be used with or without a TV, but it is highly recommended to use a TV in
order to utilize all the features.
Also refer to the TV’s User Guide for input and display instructions.
To see the lyrics on the screen, you must use a CD+G disc or MP3+G files.
u
v
— E6 —
Connection
Connecting to AC Power
Inserting Batteries
Insert the AC power cord into a
conveniently located AC outlet
having 120V AC, 60Hz.
Note:
Make all connections before
connecting to AC power.
1 Slide the battery door in the
direction the arrows to reveal
the battery compartment.
Insert eight (8) “C” size
alkaline batteries (not
included) as indicated on the
diagram.
2
Replace cover tightly before
operating.
Battery Precautions
The precautions below should be followed when using batteries in
this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged,
they can overheat and rupture. (Follow battery manufacturers
directions.)
6. Rechargeable batteries are to be removed from the product
before being charged.
7. Rechargeable batteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
CONNECTING THE POWER
   ! !!!    
— E7 —
Connecting to Aux In Jack
Connect an external device by using an
appropriate cable (3.5mm audio cable not
included) as shown.
Note:
See page E18 to select and use the Aux In
function.
To External Unit
AUDIO OUTPUT
/ HEADPHONE JACK
LINE IN
Operation
Disco Lights
When the unit is turned on, the Light
mode 1 is automatically activated. The
lights will light up and will synchronize
with sound when you speak or sing into
the microphone.
Press the LIGHT MODE button for Light
mode 2 which will display the light show
but will not respond to the microphone.
Press the LIGHT MODE button again to
turn off the Lights.
u
— E8 —
Operation
Playing a CD
1 Connect the unit as described
previously; it should be connected to
a TV. Press the ON/OFF button to
turn the unit on.
2
Lift open the CD door and insert a
CD (with standard or MP3+G files)
or a CD+G by gently pressing it on
the center spindle. Then close the CD
door.
Notes:
What is a CD+G?
A CD+G (CD+Graphics) is the
standard format for most karaoke
discs that will display the words on
the screen.
What is an MP3+G?
MP3+G is the newest format for
karaoke music utilizing the MP3’s
small file size. It will display the words
on the screen.
3
Repeatedly press the FUNCTION
button to select the CDG/CD mode;
“---” will blink when searching the
disc and then the total number of
tracks will appear.
4 Press the ENTER/PLAY/PAUSE
button to start playback; if listening
to a CD+G file, the image and lyrics
will appear on the TV screen (if
connected). When a CDG disc is
inserted, the CDG indicator will light.
u
w
v
x
— E9 —
Operation
Playing a CD (Continued)
5 Adjust the volume to a comfortable
level using the MASTER VOLUME
control.
Notes:
Never place anything other than a
CD in the compartment, as foreign
objects can damage the unit.
If no disc is inserted, “no” will appear
on the display.
If connected to a TV or other audio
source, adjust the volume of the TV
using its own volume control.
6
Connect microphone(s) and slide the
ON/OFF switch on the microphone
to the ON position.
7 Press the MIC VOLUME + or
button as desired, which will affect
both microphones.
8
Press the ECHO + or button to add
an echo effect to your voice.
9
Adjust the Key using the KEY +/
and KEY –/ buttons to obtain the
best key for the playing track.
y
U
V
WX
— E10 —
Operation
Playing a CD (Continued)
10 SKIP: Advance or go back one
track by pressing the Skip –/
Navigationand Skip +/
Navigationbutton.
11 REPEAT: During playback, press
the PROG/REPEAT button once
to repeatedly play the selected
song; the Repeat indicator
will blink. Press the PROG/
REPEAT button a second time to
repeatedly play the whole CD; the
Repeat indicator will light solid.
Press it again to cancel Repeat
function, the Repeat/Program
indicator turns off.
12 PROGRAM: You can program
up to 20 tracks on any disc for
playback in any desired order.
While in the Stop mode, press
the PROG/REPEAT button; the
Repeat/Program indicator will
blink and “01” will appear on
the display indicating the first
program is ready to program.
13 PROGRAM: Select the first
track using the Skip –/
Navigationand Skip +/
Navigation buttons. Press the
PROG/REPEAT button again to
confirm the entry. Repeat to set
up to 20 tracks into memory.
When done, press the ENTER/
PLAY/PAUSE button to start
playback.
at
ak
al
am
am
— E11 —
Operation
Playing a CD (Continued)
Program Notes:
Press the STOP/PAIR button
TWICE to stop and clear the program.
If more than 20 tracks are attempted
to be programmed, “FUL” will appear
in the display.
14 PAUSE: During playback, if
you wish to pause the disc
momentarily, press the ENTER/
PLAY/PAUSE button; the PLAY/
PAUSE indicator will blink. Press
again to resume normal playback.
15 Press the STOP/PAIR button to
stop playback.
16 RECORD YOUR VOCAL
PERFORMANCE:
To record your singing as well as
the music, press the RECORD
button. Recording will begin and
the light around the RECORD
button will light solid.
When done recording, press the
RECORD button again; the light
around the RECORD button will
turn off.
Notes:
• The recorded audio file will record onto
the USB drive.
See "Playing Songs from the USB"
section to play back your recorded files.
17 Press the ON/OFF button to
turn the unit off.
an
ap
aq
ao
— E12 —
Operation
Playing Songs from the USB
1 Connect the unit as described
previously; it should be connected to
a TV. Press the ON/OFF button to
turn the unit on.
2
Insert a USB flash drive into the USB
slot on the unit so it faces upward.
3
Repeatedly press the FUNCTION
button to select the USB mode; “USb”
will appear when searching the drive
and then the total number of files will
appear.
Note: It is highly recommended to have it
connected to a TV for USB playback.
4
Press the ENTER/PLAY/PAUSE
button to start playback; if listening
to an MP3+G file, the image and
lyrics will appear on the TV screen (if
connected).
Notes:
If connected to a TV you will see the
selected song and folders on the TV
screen. You can navigate them using
the Navigation buttons.
If you recorded any audio files you can
also select them using the Navigation
buttons to select the REC folder on the
TV screen.
5 Adjust the volume to a comfortable
level using the MASTER VOLUME
control.
Note: If connected to a TV or other audio
source, adjust the volume of the TV using
its own volume control.
u
v
w
y
x
— E13 —
Operation
Playing Songs from the USB (Continued)
6
Connect microphone(s) and slide the
ON/OFF switch on the microphone
to the ON position.
7 Press the MIC VOLUME + or
button as desired, which will affect
both microphones.
8
Press the ECHO + or button to add
an echo effect to your voice.
9
Adjust the Key using the KEY +/
and KEY –/ buttons to obtain the
best key for the playing track.
10 SKIP: Advance or go back one
track by pressing the Skip –/
Navigation and Skip +/
Navigation buttons.
You can also skip ahead 10 files/
tracks using the SKIP 10+
button.
11 REPEAT: During playback, press
the PROG/REPEAT button once
to repeatedly play the selected
song; the Repeat/Program
indicator will blink rapidly. Press
the PROG/REPEAT button a
second time to repeatedly play
the selected folder; the Repeat
indicator will blink slowly. Press
a third time to repeatedly play
the USB; the Repeat/Program
indicator will light solid. Press it
again to cancel Repeat function;
the indicator will turn off.
V
WX
at
ak
at
U
— E14 —
Operation
Playing Songs from the USB (Continued)
12 PROGRAM: You can program up
to 20 tracks for playback in any
desired order. While in the Stop
mode, press the PROG/REPEAT
button; the Program indicator
will blink and ”01” will appear on
the display indicating the first
program is ready to program.
Select the first track using the
Skip –/Navigationand Skip
+/Navigationbuttons. Press
the PROG/REPEAT button again
to confirm the entry. Repeat to
set up to 20 tracks into memory.
When done, press the ENTER/
PLAY/PAUSE button to start
playback.
Notes:
Press the STOP/PAIR button
TWICE to stop and clear the program.
If more than 20 tracks are attempted
to be programmed, “FUL” will appear in
the display.
13 PAUSE: During playback, if
you wish to pause the music
momentarily, press the ENTER/
PLAY/PAUSE button; the Play/
Pause indicator will blink. Press
again to resume normal playback.
14 Press the STOP/PAIR button to
stop playback.
15 Press the ON/OFF button to turn
the unit off.
al
al
am
an
ao
— E15 —
Operation
Using a Bluetooth Device
1 Connect the unit as described
previously. Press the ON/OFF button
to turn the unit on.
2 Repeatedly press the FUNCTION
button to select the Bluetooth; “bt”
will appear in the display. The unit
automatically searches for and pairs
a previously paired Bluetooth device
(if previously paired). If no previously
paired devices are present, connect as
shown in the next step.
Note: You can also press the STOP/PAIR
button to disconnect any paired devices
in order to pair another device.
3 Turn on your device’s Bluetooth option
in settings to search for a discoverable
device with a Bluetooth signal. Select
Singing Machine” from the device
results on the Bluetooth menu.
Note: Also refer to the user manual of your
Bluetooth device for detailed instructions.
4 The Bluetooth indicator will light solid
and a chime will sound.
Notes:
If your Bluetooth prompts you for a
passcode during the pairing process,
please enter “0000” to connect.
On some Bluetooth devices, once pairing
is complete, select your Bluetooth device
as “Use as Audio Device” or similar.
If connection is lost after successful
pairing, check to make sure the distance
between speaker and Bluetooth-enabled
device does not exceed 30 feet/10
meters.
3
4
u
v
— E16 —
Operation
Using a Bluetooth Device (Continued)
5 Start playback of your bluetooth
device. Press the ENTER/PLAY/
PAUSE button during playback to
pause the song.
6
Adjust the volume to a comfortable
level using the MASTER VOLUME
control on this unit as well as
the volume on your Bluetooth
device.
7
Connect microphone(s) and slide the
ON/OFF switch on the microphone
to the ON position.
8
Press the MIC VOLUME + or
button as desired, which will affect
both microphones.
9
Press the ECHO + or button to
add an echo effect to your voice.
10 SKIP: Advance or go back one
track by pressing the Skip –/
Navigation and Skip +/
Navigation buttons.
y
U
W
V
X at
— E17 —
Operation
Using a Bluetooth Device (Continued)
11 RECORD YOUR VOCAL
PERFORMANCE:
To record your singing as well as
the music, press the RECORD
button. Recording will begin and
the light around the RECORD
button will light solid.
When done recording, press the
RECORD button again; the light
around the RECORD button will
turn off.
Notes:
• The recorded audio file will record onto
the USB drive.
See "Playing Songs from the USB"
section to play back your recorded files.
12 Press the ON/OFF button to turn
the unit off.
ak
al
— E18 —
Operation
Using the AUX IN Jack
1 Connect the unit as described
previously. Press the ON/OFF button
to turn the unit on.
2
Connect the external unit to the
AUX IN Jack on the front of this unit.
Connecting an external unit will allow
the audio to be played through your
Singing Machine.
Notes:
It is highly recommended to set the
volume on the auxiliary unit to 1/3 or
lower to avoid distortion.
Skipping files/tracks is not possible in this
unit when using an external device.
3 Repeatedly press the FUNCTION
button to select the AUX IN mode;
“AU” will appear in the display.
4 Adjust the volume using the MASTER
VOLUME control on this unit or your
external device’s volume control.
5 Connect microphone(s) and slide the
ON/OFF switch on the microphone to
the ON position.
u
w
y
x
v
— E19 —
Operation
Using the AUX IN Jack (Continued)
6 Press the MIC VOLUME + orbutton
as desired, which will affect both
microphones.
7
Press the ECHO + or button to add
an echo effect to your voice.
8 RECORD YOUR VOCAL
PERFORMANCE:
To record your singing as well as the
music, press the RECORD button.
Recording will begin and the light
around the RECORD button will light
solid.
When done recording, press the
RECORD button again; the light
around the RECORD button will turn
off.
Notes:
• The recorded audio file will record onto
the USB drive.
See "Playing Songs from the USB" section
to play back your recorded files.
9 Press the ON/OFF button to turn the
unit off.
X
U
VW
— E20 —
Operation
To purchase and download karaoke music,
please visit http://store.singingmachine.
com to access over 13,000+ of your
favorite karaoke songs. You will need a USB
flash drive (not included) to transfer the
downloads to this unit.
Follow these easy steps:
1 Go to http://store.singingmachine.com
using your internet browser, and then
register.
2 Select and purchase your favorite
karaoke music from the Singing
Machine Download Store.
3 Download your selected purchase(s)
from the Singing Machine Digital
Locker to your USB flash drive.
4 Insert the USB flash drive as shown on
page E12 and enjoy!
Where to Download MP3+G Files
FAQ
Where can I get additional help with the
file formats?
Visit http://singingmachine.com/smc-
music/ to get additional resources about
the right type of FILE FORMAT for your
system.
Helpful Hints:
The .mp3 and .cdg files are delivered for download in
a single, compressed MP3+G.zip file. The MP3+G file
cannot be played as a .zip file on a USB flash drive.
To play karaoke songs using a USB flash drive, the
MP3+G .zip file must be unzipped as follows:
Connect a USB flash drive to your computer.
Download the MP3+G file from your Digital
Locker and save the .zip* file to a folder on your
computer.
Double click the .zip file to open the .zip (you
will see the .mp3 and .cdg files).
Drag and drop the .mp3 and .cdg files to the
USB flash drive.
Remove (eject) the USB flash drive from your
computer.
Turn on the Singing Machine and connect the USB
flash drive.
Note: Your downloaded songs can also be
burned to a blank CDR/CDRW.
— E21 —
Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking service:
No Power
Power is not on; press the ON/OFF button to turn power on.
Confirm the AC adapter is connected securely to the back of the unit.
Connect the unit to a different outlet.
If using batteries, replace with new ones.
No Sound – General
MASTER VOLUME is set to minimum; raise volume.
Correct Function was not selected; select using the FUNCTION button.
If using an external device, raise the volume.
.
No Sound – If connected to a TV
Volume on the TV is muted or too low.
Correct source (usually AV) was not selected on the TV’s menu.
Lyrics do not appear on the TV screen
If connected to a TV, Video plug is not connected properly; see page E5.
If connected to a TV, select the correct source on the TV (usually AV).
The file/track being played is not a track recording with lyrics. These are the only files
that allow you to view the lyrics on the TV screen.
Nothing will appear on the TV screen when using Aux In or Bluetooth.
No sound from the microphone
Make sure the microphone is firmly connected to the MIC 1 or MIC 2 jack.
Make sure the Mic’s ON/OFF switch on the Mic is set to the ON position.
Make sure the mic’s volume is not set too low.
MASTER VOLUME is set to minimum; raise volume.
File(s) on USB jack not playing
The file is corrupted; replace the file.
The file is not in a format this unit will play.
The connected USB device is not supported by the product.
The Bluetooth device cannot be paired or connected with the unit
You have not activated the Bluetooth function of your device; see page E15 or refer to
the Bluetooth device user’s manual.
The system is not in pairing mode; press the STOP/PAIR button to restart pairing.
The Music is not available on the unit after successfully connecting the Bluetooth
Ensure your Bluetooth device can support the A2DP Bluetooth profile.
The volume on the external Bluetooth device is set to low or muted; raise as desired.
— E22 —
Specifications
AUDIO
Output Power .............................................................................................. 8 Watts (RMS) 10% THD
Output Impedance ........................................................................................................................4 Ohms
CD SECTION
Frequency Response..................................................................................................... 100Hz - 20kHz
Signal-to-Noise Ratio ................................................................................................... 50dB (A-WTD)
Number of Programs ..........................................................20 Step Random Access Programming
BLUETOOTH
Bluetooth Version ..................................................................................................................V2.1 + EDR
Working Distance ..........................................Up to 30 feet/10 meters measured in open space
USB
Format ................................................................................................................................................FAT32
Maximum Compatibility ..................................................................................................................32GB
GENERAL
Power ....................................................................................................................DC9V Positive Center
Dimensions - Main Unit ................................................... 297mm (W)x378mm (H)x216mm (D)
Weight - Main Unit ......................................................................................................................... .2.2Kg
Microphone ....................... -74 dB 600 Ohms impedance with 6.3 mm Dynamic Microphone
Aux In ..........................................................................................................................3.5mm Stereo Jack
Specifications are subject to change without notice.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by The Singing Machine Company, Inc. is under license.
Other trademarks and trade names are those of their respective owners.
Visit Our Website: www.singingmachine.com
The Singing Machine Company, Inc.
4060 E Jurupa Street, Unit B
Ontario, CA 91761-1413 USA
Copyright © 2018 - All Rights Reserved.
Droit d’auteur © 2018 Tous Droits Réservés.
PRINTED IN CHINA
IMPRIMÉ EN CHINE
2088-18xx-EF-LA

Navigation menu