The Watt Stopper d b a Qmotion 433B96D570 NANO Remote Transmitter User Manual 13 0403 Exhibit Cover B
Qmotion Incorporated NANO Remote Transmitter 13 0403 Exhibit Cover B
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2156822 |
| Application ID | U+2MouenV6/4s8Yi66IC+A== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 10.4kB (129941 bits) |
| Date Submitted | 2014-01-03 00:00:00 |
| Date Available | 2014-01-06 00:00:00 |
| Creation Date | 2013-12-23 09:53:27 |
| Producing Software | ScanSoft PDF Create! 7 |
| Document Lastmod | 2013-12-23 09:53:28 |
| Document Title | Microsoft Word - 13-0403 - Exhibit Cover - B.doc |
| Document Creator | Microsoft Word - 13-0403 - Exhibit Cover - B.doc |
| Document Author: | courtney.mcgann |
Certification Exhibit FCC ID: 2ABLX-433B96D570 IC: 8832A-433B96D570 FCC Rule Part: 15.231 IC Radio Standards Specification: RSS-210 ACS Project Number: 13-0403 Manufacturer: Qmotion Incorporated Model: QAR-433, QAD-433, QAS-433, QFR-433, QFD-433, QFS-433 Manual 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 Operation Manual Qmotion remotes QAR-433, QFR-433, QAD-433, QFD-433, QAS-433, QFS-433 This family of remotes consists of four types of buttons for various purposes. The buttons are Up/Down or Open/Close, Channel, Variable Position and Mode Select. The remotes have LEDs for channel/mode indicators. The mode select button on the back is used for programing purposes in factory. The channel button is used to select the channel that is to be selected for user selected shades. The up/down or open/close buttons and the variable position buttons are used to direct the shade selected to move to a specific position. Programing of selected shades to certain address programable channels is performed in accordance with specific shade directions. FCC COMPLIANCE Warning: Changes or modifications to this device not expressly approved by Qmotion™ Incorporated could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. INDUSTRY CANADA COMPLIANCE Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 4 XMP Toolkit : 3.1-701 Producer : ScanSoft PDF Create! 7 Creator Tool : Microsoft Word - 13-0403 - Exhibit Cover - B.doc Create Date : 2013:12:23 09:53:27-05:00 Modify Date : 2013:12:23 09:53:28-05:00 Title : Microsoft Word - 13-0403 - Exhibit Cover - B.doc Creator : courtney.mcgann Author : courtney.mcgannEXIF Metadata provided by EXIF.tools