The Watt Stopper d b a Qmotion QMTRX433A QDoubleplay USB Transceiver User Manual 12 0076 Exhibit Cover
HomeRun Holdings Corp. QDoubleplay USB Transceiver 12 0076 Exhibit Cover
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1668376 |
| Application ID | OMt8xAt9fe6h5KVsDLSo2Q== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 11.08kB (138449 bits) |
| Date Submitted | 2012-04-03 00:00:00 |
| Date Available | 2012-04-03 00:00:00 |
| Creation Date | 2012-03-27 10:59:06 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2012-03-27 10:59:06 |
| Document Title | Microsoft Word - 12-0076 - Exhibit Cover.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | courtney.merrick |
Certification Exhibit FCC ID: X6P-QMTRX433A IC: 8832A-QMTRX433A FCC Rule Part: 15.231 IC Radio Standards Specification: RSS-210 ACS Project Number: 12-0076 Manufacturer: HomeRun Holdings Model: QXU007 Manual 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 QdoubleplayTM Manual 1. Use Qdoubleplay to enhance the performance between your Qmotion shade and the Qmotion remotes. 2. Locate USB compliant jack where you want Qdoubleplay to be located. The ideal location will be at some point between your Qmotion shade and the Qmotion remote that controls it. Experimentation with locations may be required to find best performance. 3. Plug Qdoubleplay into the USB compliant jack. FCC COMPLIANCE Warning: Changes or modifications to this device not expressly approved by HomeRun Holdings Corp. could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. INDUSTRY CANADA COMPLIANCE Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : courtney.merrick Create Date : 2012:03:27 10:59:06-04:00 Modify Date : 2012:03:27 10:59:06-04:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2012:03:27 10:59:06-04:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - 12-0076 - Exhibit Cover.doc Creator : courtney.merrick Document ID : uuid:ec4775af-d4bb-4435-8844-feacfba3b002 Instance ID : uuid:b5589285-f5fb-43f1-a5f4-aca88d4cb0dd Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 3EXIF Metadata provided by EXIF.tools