Therma Tru Tt Whitepaper Lr User Manual
2017-08-03
User Manual: Therma Tru Tt Whitepaper Lr tt_whitepaper__lr 5979 media trade
Open the PDF directly: View PDF .
Page Count: 15
1
Mostfrequestmethodusedforprepurchaseresearch Percentofpurhcases
Reviewedonlineblogs 5%
Touredhouses/homeshows 6%
Consideredpreviousexperiencewithbrand 8%
Readmagazines 8%
Lookedatnewspaperads/storecirculars 9%
WatchedhomeimprovementTV 9%
Lookedthroughcatalogs 12%
Readdoorbrochures 14%
Visiteddoormanufacturers'websites 14%
Nothingdone 14%
Searchedonlineproductreviews 15%
Visiteddoorretailers'websites 16%
Talkedtofriends/relatives 17%
Talkedtoacontractor/builder/remodeler 19%
Talkedtoasalesperson 27%
Comparedprices 31%
Walkedthroughstores/showroomdisplays 34%
Online(NET) 37%
5%
6%
8%
8%
9%
9%
12%
14%
14%
14%
15%
16%
17%
19%
27%
31%
34%
37%
0% 5% 10% 15% 20% 25% 30% 35% 40%
Reviewed online blogs
Toured houses / home shows
Considered previous experience with brand
Read magazines
Looked at newspaper ads / store circulars
Watched home improvement TV
Looked through catalogs
Read door brochures
Visited door manufacturers' websites
Nothing done
Searched online product reviews
Visited door retailers' websites
Talked to friends / relatives
Talked to a contractor / builder / remodeler
Talked to a salesperson
Compared prices
Walked through stores / showroom displays
Online (NET)
Shopping&Selec9onProcess
Open the door to success.
4 Steps to Create a
Compelling Showroom
What did you do during the shopping and product selection process for your [DOOR TYPE]?(Check all that apply.)
A showroom gives consumers the opportunity to interact with a product – which can have a big impact on their purchase decision.
Many dealers have found they need a showroom to reach a specic segment of the market. Therma-Tru’s research into the consumer
purchase process supports this concept, particularly when it comes to selling entry doors to homeowners in the new construction and
replacement markets. Now, Therma-Tru is sharing this research along with four steps to creating a compelling showroom. In addition,
we’ll share showroom strategies and success stories from eleven dealers around the country. These case studies provide you with
real world applications that have driven sales growth for dealers. It’s our hope that you use these ndings to your advantage as you
prepare your showroom for selling seasons to come.
Consumer Purchase Process
Most consumers say they know exactly what they want in a door prior to entering the purchase process. However, they know very
little about doors and what denes a high-quality door. That’s where a top-notch showroom and well-trained sales staff can make all
the difference.
Therma-Tru regularly tracks the buying behavior of consumers who have recently purchased an entry door. Our research shows that
some of the most frequent actions in the purchase process are:
• Researching online.
• Visiting a showroom.
• Talking to a salesperson.
Shopping & Selection Process
A compelling showroom plays a major role in the
purchase process by giving the consumer the
opportunity to see products rsthand. This is key
to consumers when it comes to evaluating quality,
which, in their minds, means long-lasting
and durable.
Likewise, a showroom staffed with knowledgeable
sales associates is also important to the purchase
process. Consumers go to them for information on
the installation process and cost, among
other things.
With these research ndings in mind, now is the
time to make updates to showrooms and staff
training. At Therma-Tru, our goal is to support
dealers to help ensure their success. We are
there every step of the way as dealers refresh and
enhance their showroom displays of Therma-Tru
doors, and train their sales staff to maintain a high
level of prociency on how to sell the value of a
berglass door from Therma-Tru.
Long-Lasting & Durable
Energy-Efcient
Craftsmanship
Secure
Operates Easily
Strong Warranty
Beautiful
5.39
5.27
4.41
3.87
3.33
3.00
2.72
Most
Important
Least
Important
What Characteristics Indicate Quality?
7
6
5
4
3
2
1
Average Rankings
Note: Over 500 respondents answered this question by rating all possible denitions of
“quality” on a scale from 1 to 7 (1 being the most important and 7 being the least).
3
Step 1: Have a purpose in mind.
When planning the next steps for your showroom, ask yourself:
“What is the purpose of our showroom?” and “What are we
trying to accomplish?” Do you want to differentiate yourself and
display the newest products available? Sell more high-end and
high-margin products? Whatever your objective may be, make
sure you dene it early in order to stay focused on reaching a
successful result.
Step 2: Plan your showroom around that purpose.
Depending on your objective and starting point, planning out your
showroom may take as little as a few months or as long as several
years. Even as you plan short-term improvements, keep an eye on
opportunities for future expansions and changes to your showroom.
As Scott Sommers of Hartville Hardware put it, “A showroom is
never nished.”
Step 3: Develop a process to keep your
showroom up-to-date, relevant and
competitive.
Building or expanding your showroom is just the beginning.
Several of our featured dealers commented on how they
work continuously to update and upgrade their showrooms’
selection of products. “You’ve simply got to try new things
to stay competitive,” says Tim Harris of American Cedar &
Millwork. Another dealer goes through an annual three-month
process to decide which products to add or remove from
their showroom.
Suppliers and distributors also factor into successful
showrooms. Dealers want to offer quality products to
consumers, but don’t forget that service and overall
experience play a role as well. “Consider which suppliers
are the easiest to work with, have the most consistent lead
time, and are the most service-friendly,” says Harris. Support
from distributors that offer a big selection and training on
products, among other things, can also make a difference.
Step 4: Prepare your sales staff.
Finally, you must put the same amount of effort into
training your sales staff – inside and outside. “While
the showroom and displays are great for capturing
attention, nothing beats a knowledgeable, outgoing
sales person,” says Hartville’s Sommers. “Train,
train, train your sales staff to sell product features
and benets,” adds Troy Kough, president of Kight
Home Center.
The Path to Showroom Success
4
Showroom Strategies
In 2013, Therma-Tru partnered with LBM Journal to highlight several success stories from dealers around the country in a special
section called “Showroom Strategies.” This diverse group ranges in sales from a few million dollars to hundreds of millions;
from a primary focus on homeowners to almost exclusively trade professionals. In these interviews, dealers share their words of
wisdom and the lessons learned as they adjusted their showrooms to better serve their customers and increase sales. Keep these
ideas in mind as you put together a plan to enhance your Therma-Tru selling opportunities in 2014 and share your ideas with your
Therma-Tru representative.
In Their Own Words
The quotes below are just a glimpse of the tips these successful dealers have shared. Their full interviews, as well as company
background and sales information, are on the pages that follow.
“Invest in the right space as far
as location and dedicated size.”
– Bob Lane, Moehl Millwork
“Put your displays in walls and not on rollers –
it makes a big difference.”
– Pete Vitola, Beeson Hardware and Lumber Company
“Plan ahead. You can save a great
deal of money by thinking ahead.”
– Dan Sullivan, Kelly-Fradet Lumber
“We needed the support of a solid distributor that
could give us the product training, inventory, selection
and quality of finished goods.”
– Troy Kough, Kight Home Center
“A well-trained staff of professionals
is equally important to your success.”
– Pete Meichtry, Ganahl Lumber
5
An Interview with Tim Harris, Showroom Sales Manager at American Cedar
& Millwork:
Q: You recently decided to move your showroom from a separate leased space to within
your main facility in Raleigh. How do you expect this to affect your sales?
A: With the new 3,000 sq. ft. showroom in the same facility as our lumberyard, we
expect some of our customers that were previously buying specic items to now
buy more (and different) products since they can see all of our product options at
the same facility.
Q: How long did it take from the decision to update the showroom until it
was completed?
A: Managing a showroom for us is always an ongoing process. However, from the
start of relocating the showroom to its opening, it took about three months.
Q: What specic type of assistance did you get from manufacturers and suppliers when
creating the new showroom?
A: Our suppliers have always been great at offering us displays for free or other
low-cost alternatives. We’re known in our marketplace for continually offering the
newest products, so we took this opportunity to upgrade and expand our displays.
This excites our customers and gives our suppliers the opportunity to showcase
their newer products.
Q: What criteria do you use to decide which brands to feature in your showroom?
A: When displaying brands, you have to consider which supplier’s products are your
best selling, and at the same time, consider which suppliers are the easiest to
work with, have the most consistent lead time, and are the most service-friendly.
Q: How do you encourage your builder and remodeler customers to use your showroom
with their homeowner customers?
A: We have always encouraged our customers to treat our showroom as if it is an
extension of their own ofces. We have builders that plan meetings with their
clients and designers in our conference room, which is great. They’re welcome to
use our facility whether it involves us or not.
Q: What tips do you have for other dealers who are thinking of redoing their showrooms?
A: Don’t be afraid to bring in any product that you think may be a benet to your
customers. If the new product doesn’t prove fruitful, then sell it to a customer for a
deal and replace it with something else. You’ve simply got to try new things to
stay competitive.
Headquarters
Lewes, Delaware
Locations
Raleigh, North Carolina
Greensboro, North Carolina
Millersville, Maryland
Lewes, Delaware
Dover, Delaware
Annual Sales
$22 Million
Customer Focus
Company Background
Started as a family business in
Delaware in 1984, American Cedar &
Millwork now operates four locations,
as well as a pre-staining operation.
Over the years, the company has
expanded its product line to include
cedar, redwood, hardwoods, roong
materials, doors, windows, hardware,
custom mouldings and other related
millwork items, in addition to the
services of the pre-staining operation.
Showroom
Three of the company’s four locations
have showrooms. Their newest
project is relocating an existing
showroom from a leased space
across the street from their facility
in Raleigh, North Carolina, to within
the company’s main operations so
everything will be under one roof.
Dealer Profiles
American Cedar & Millwork
Homeowner
Contractor
75%
25%
6
An Interview with Pete Vitola, Vice President at Beeson Hardware and
Lumber Company:
Q: Your company has several divisions. Which division do doors, windows and
moulding fall into?
A: I head up the Hardware and Lumber Division for Beeson Hardware. That’s the
area where these products are sold.
Q: Tell us about your latest showroom upgrade.
A: We update our showroom every two years based on customer needs and quality
of products available to showcase. Every year, we evaluate new displays that are
available to us and update those regularly.
Q: What kind of assistance, if any, do you receive from manufacturers and suppliers?
A: We rely on co-op assistance that allows us to do enhanced showroom features
and local marketing. Beeson Hardware advertises on the radio, and we have a
good line of communications with our builder customers.
Q: What are you personally most excited about regarding your showroom?
A: All of our displays are built into walls. This gives our customers a better idea of
what the product will look like in a home. My biggest tip to other dealers is to
imitate this idea. Put your displays in walls and not on rollers – it makes a
big difference.
Q: Who are the top manufacturers / suppliers with the most visibility in your showroom?
A: Andersen, JELD-WEN, Therma-Tru® Doors, Ply Gem and Masonite.
Q: Are there any brands you added to your showroom during its most recent remodel?
A: Yes, we added in YKK AP windows and Wolf Custom cabinets.
Q: What are you looking for from a company that makes it a winner in your showroom?
A: First and foremost, we want quality products. Second, we need impressive
displays that will sell the company’s products. And third, we’re looking for
partners in the eld. Those companies that offer co-op advertising opportunities
are always a winner with us.
Q: What type of feedback have you received on your showroom?
A: We’re told that we have the nicest showroom in our area. This continually helps
increase our business.
Beeson Hardware and
Lumber Company
Headquarters
High Point, North Carolina
Locations
High Point, North Carolina
Asheboro, North Carolina
Annual Sales
Not Given
Customer Focus
Company Background
Privately owned Beeson Hardware
and Lumber Company has been in
business since 1883. The company
carries more than 10,000 products
and operates four divisions: Hardware
and Lumber, Industrial Products,
Contract Hardware, and Hardware
and Plumbing.
Showroom
Beeson Hardware and Lumber
regularly updates its showroom.
Homeowner
Builder
Remodeler
60%
10%
30%
7
An Interview with Scott Sommers, Lumber Division Manager at
Hartville Hardware:
Q: Why did you decide to move your business location?
A: We looked ahead to the future and determined if we wanted to be in business for
the next 40 years we needed to move forward with investing in a new facility that
meets the changing needs of our customers.
Q: How long did it take from the decision to construct a new location until it
was completed?
A: We invested ve years in the plans, construction and opening of the new location.
Q: Did you add any new brands or eliminate any that were not working when you
introduced the new millwork, doors, windows and decks showroom?
A: We did not change brands; however, we gave more space to some and took
space away from others. Vendor partners who got excited about the project and
stepped up were featured above those vendors who did not.
Q: What specic type of assistance did you get from manufacturers and suppliers when
creating the new showroom?
A: Some vendors helped us with showroom layout and design, which was very
benecial. I believe the ones who made this commitment saw a payback with our
increased sales of their products. Companies like Andersen, Therma-Tru® Doors
and Timbertech are all important vendors for us and they’re rewarded with strong
visibility in our showroom.
Q: How has the showroom refresh affected your sales and margins?
A: Our sales at Hartville Hardware are up more than 35% for the main product lines
we feature in our showroom over the rst 12 months since the opening. We’re also
beneting because the new location is selling more higher-end products.
Q: What are you personally most excited about regarding the new moulding, doors,
windows and decks showroom?
A: I like having all our displays current. As any dealer knows, keeping displays
up-to-date is difcult and it was great to have a fresh start on this as well as the
space to do it correctly.
Q: What tips do you have for other dealers who are thinking of redoing their showroom?
A: While the showroom and displays are great for capturing attention, nothing beats
a knowledgeable, outgoing salesperson. The one-on-one salesperson contact is
still the key to success in a showroom. And remember that a showroom is never
nished. We’re a year in and we need to start making changes to keep our
showroom updated.
Hartville Hardware
Headquarters
Hartville, Ohio
Locations
Hartville, Ohio
Annual Sales
Not Given
Customer Focus
Company Background
Hartville Hardware is a family-owned
business and a member of Do It Best
Corp. Started in 1972, the company
prides itself on playing a vital role in
the community where it was started
41 years ago.
Showroom
In April 2012, Hartville Hardware
opened a new 300,000 sq. ft. facility
a mile from its original location. Within
the facility, there’s a new 8,000 sq.
ft. showroom for millwork, doors,
windows and decks, along with an
additional 20,000 sq. ft. showroom
for kitchen and bath, ooring and
appliances. The new state-of-the-art
facility was created to position the
company for growth in the future
and to compete with area
big-box locations.
Homeowner
Builder
Remodeler
60%
20%
20%
8
An Interview with Dan Sullivan, General Manager at Kelly-Fradet Lumber:
Q: Why did you decide to redo your showroom?
A: We actually update our showroom every winter to prepare for the busy spring,
summer and fall selling seasons. It’s important that we update yearly to feature
new products so our customers can actually see the newest products available
from us.
Q: How long did it take from the decision to update the showroom until it
was completed?
A: We keep ourselves on a strict three-month time frame each winter for updating
the showroom.
Q: Who are the key suppliers to your showroom?
A: Andersen Windows, Merillat, Therma-Tru, Velux, Azek, GAF, Medallion Kitchen and
Bath Cabinetry, JELD-WEN, Silver Line, Schlage and Larson.
Q: Did you add any new brands or eliminate any that were not working when you
introduced the new showroom?
A: During our last update, we added in Eagle windows by Andersen and Schlage
door hardware. At the same time, we eliminated Marvin Windows and Doors. The
decisions to make these changes were mostly customer-driven. We try to have
the top brands available in the showroom that our customers want and use in our
specic geographic area.
Q: What type of assistance did you get from manufacturers and suppliers when creating
the new showroom?
A: Both helped us out with display design, signage and discounts to help offset the
cost of the yearly update.
Q: How has the showroom refresh affected your sales and margins?
A: Almost every showroom improvement we make affects our sales in a positive way.
Showcasing some of the higher-end products and different product options often
leads us to increased sales.
Q: What are you personally most excited about regarding the updated showroom?
A: Any time we can help simplify the building process, it helps our customers.
By offering more options and information to our customers, it gives us the
opportunity to take care of them.
Q: What tips do you have for other dealers who are thinking of redoing their showroom?
A: Plan ahead. You can save a great deal of time and money by thinking ahead.
Preparation helps everything go quicker and more smoothly.
Kelly-Fradet Lumber
Headquarters
Eneld, Connecticut
Locations
Eneld, Connecticut (2 Locations)
Ellington, Connecticut
East Longmeadow, Massachusetts
Annual Sales
Not Given
Customer Focus
Company Background
The privately and locally owned
Kelly-Fradet Lumber company
operates three locations in Connecticut
and one in western Massachusetts.
Started in 1951, the company prides
itself in having more than 600 years
of combined employee experience.
Kelly-Fradet offers retail and online
shopping, job site support for
professionals and consumers, and
computer estimating capabilities for
windows, doors, engineered lumber
and cabinetry.
Showroom
Annual updates are made to the
company’s 2,600 sq. ft. showroom in
Eneld, Connecticut.
Homeowner
Builder
Remodeler
60%
25%
15%
9
An Interview with Troy Kough, President at Kight Home Center:
Q: Why did you decide to redo your showroom?
A: In 2012, we made the decision to close our door shop, which spurred the
showroom renovation. We decided to align ourselves with a top-name door
manufacturer and distributor that could give us the same quality product on a
timely basis with competitive pricing.
Q: How long did it take from the decision to update the showroom until it
was completed?
A: From the decision to renovate and add in door displays to the opening of the new
showroom, it was about ve to six months.
Q: What specic type of assistance did you get from manufacturers and suppliers when
creating the new showroom?
A: The entry door manufacturer we selected to showcase and their distributor,
Lumbermen’s out of Shelbyville, Indiana, gave us new display credits as well
as literature, training and support in selecting the products to display in the
showroom.
Q: What criteria did you use for deciding which brands to add or eliminate?
A: We changed from another brand to Therma-Tru® Doors in order to give our
customers quality products. We had condence in the quality of Therma-Tru
Doors’ product to begin with, but we needed the support of a solid distributor
like Lumbermen’s that could give us the product training, inventory, selection and
quality of nished goods in order to retain our position as the leader in exterior
doors in our market.
Q: How has the showroom refresh affected your sales and margins?
A: We’ve maintained our margins and increased our sales by approximately 7%. With
the new complete door unit displays, instead of the slab displays we had before,
we’re denitely seeing an increase in sales of our higher-end Classic-Craft® doors,
which is a big win for us.
Q: How do you encourage your builder and remodeler customers to use
your showroom?
A: We’ve maintained a millwork showroom for our contractor customers since the
late 1980s and try to consistently offer the brands and products that our customer
base demands. Most importantly, we keep up with trends and selections that are
the latest and best available products in order to offer our customers what they
need to build their sales.
Q: What tips do you have for other dealers who are thinking of redoing their showroom?
A: Always, always, always use the best products you can get and train, train, train
your sales staff to sell product features and benets. The best products will always
be the “best value” for the customer when considering long-term investment and
maintenance aspects.
Kight Home Center
Headquarters
Evansville, Indiana
Locations
Evansville, Indiana
Rockport, Indiana
Owensboro, Kentucky
Annual Sales
$30 Million
Customer Focus
Company Background
Kight Home Center is a wholly owned
subsidiary of Carter Lumber Company
with two operating locations in Indiana
and one in Kentucky.
Started in 1957 as Kight Lumber
Company by Robert Bernhardt, growth
happened quickly for this family-run
business. In the 1960s, Kight Kitchen
Interiors was opened and property
was purchased for company
expansion and a rail drop-off point for
lumber. Additional locations opened in
the 1980s, and by 1998 Kight Custom
Millwork & Laminate was established.
Kight Home Center was acquired by
the Carter Lumber Company in 2005.
Showroom
A newly updated 18,000 sq. ft.
showroom was opened in late 2012
at the company’s Evansville location.
The showroom features departments
dedicated to Kitchen and Bath,
Installed Sales, Decks and Fencing,
plus Windows and Doors, along with
offering in-house drafting services and
a multitude of other products.
Homeowner
Builder
Commercial
5% 5%
90%
10
An Interview with Bob Lane, Vice President of Sales at Moehl Millwork:
Q: Why did you decide to redo your Iowa showroom recently?
A: Primarily, we wanted our customers to have a place where they could bring
their customers to show them the most updated products in the industry. We’re
focused on enhancing our showrooms continually with the latest products.
Q: What makes this showroom different in the marketplace?
A: Variety. We can show the customer products that t any price range of home. One
of the changes we made to the new showroom was adding in products to t less
expensive homes that are being built in our market to open up more options to our
customers. Once at the showroom, the customer can pick out everything from
high-end cabinets to custom-made windows to entry door systems.
Q: How long did it take from the decision to update the showroom until it
was completed?
A: About two years.
Q: What specic type of assistance did you get from manufacturers and suppliers when
creating the new showroom?
A: Our suppliers worked with us to provide a deeper discount than normal on
materials because they knew they’d be featured in this new showroom. Several
of our suppliers, like Therma-Tru® Doors, have lots of displays in the showroom
because they wanted to support our efforts to provide different product line
options to showroom visitors.
Q: What’s the biggest advantage of the new showroom for your business?
A: We can now offer people options of good, better, best to match their needs. This
also allows us to upsell certain products and close the sale while they’re in
the showroom.
Q: How do you encourage your builder and remodeler customers to use your showroom
for use with their homeowner customers?
A: We’ve thought ahead for the professional who is bringing in consumers. We offer
complimentary refreshments, have toys for children to play with so the parents
can focus on purchase decisions and provide a great deal of one-on-one attention
so the consumer feels comfortable with their product choices.
Q: What tips do you have for other dealers who are thinking of redoing their showroom?
A: Invest in the right space as far as location and dedicated size. During the
showroom’s design stage, seek input from different people in your company
because the sales people don’t have all the ideas!
Moehl Millwork, Inc.
Headquarters
Ankeny, Iowa
Locations
Ankeny, Iowa
Olathe, Kansas
Annual Sales
$31 Million for the Iowa Operation
Customer Focus
Builders, Remodelers and
Homeowners
Company Overview
Started in the 1960s, Moehl Millwork,
Inc. is a locally owned wholesale
distributor of millwork products
located just north of Des Moines,
Iowa. The company serves lumber
dealers throughout the state, along
with metro area contractors and offers
a wide variety of products including
windows, doors, wood moulding, stair
parts, hardwood, lumber, cabinets,
countertops, and related hardware.
Moehl Millwork specializes in
full-service support for residential
and commercial project customers
and also operates in Olathe, Kansas,
under the name Kansas City Millwork
Co., supplying millwork products to
contractors in the Kansas City area.
Showroom
The recently opened 3,000 sq. ft.
showroom in Ankeny focuses on
the newest products and trends
for commercial, residential and
multi-family new construction and
remodeling projects. A 2,500 sq. ft.
showroom also exists at the Kansas
City location.
11
An Interview with Kurt Netzer, Retail Sales Manager at Scherer Bros. Lumber Co.:
Q: Why did you decide to redo your showroom?
A: We wanted to expand the selections of products we sold and supported. Our
mission is to be an outstanding provider of building materials in our area and we
feel that our displays deliver education, as well as support, for our contractors and
their clients.
Q: How long did it take from the decision to update the showroom until it
was completed?
A: For us, it took a full year to plan out and implement the showroom change.
Q: Did you add any new brands or eliminate any that were not working when you
introduced the new showroom?
A: Our priority was on expanding the selections and options of the products that we
presently were displaying by doubling the area we had dedicated for that purpose.
Our goal was for our sales staff to be able to show actual full-size and working
units to customers. Previously, we were limited in selection options with just
corner samples or examples in pictures. There’s nothing better than having a full
operating unit in front of someone when trying to make the sale.
Q: What specic type of assistance did you get from manufacturers and suppliers when
creating the new showroom?
A: The design assistance and co-op fund support we received from many suppliers
helped us with the new showroom implementation. Marvin, Anderson,
Therma-Tru and Simpson all have strong visibility in our showroom and each of
those companies were supportive of the redesign efforts.
Q: How has the showroom refresh affected your sales and margins?
A: The most important aspect is that the showroom allows us to very easily upsell
products because we have so many options to show our customers. We also
found it was a great asset in 2010-11 when the focus was on the energy tax
credit – people could see and touch energy-efcient products before making their
buying decisions.
Q: How do you encourage your builder and remodeler customers to use
your showroom?
A: We designed the showroom to have two meeting areas so that customers and
contractors can sit down and review the selections available to them.
Q: What tips do you have for other dealers who are thinking of redoing their showroom?
A: Do not rush the process. There are many considerations when renovating
a showroom. Creating a clean, open space while still showcasing as many
product options as possible is important. And don’t forget to consider space for
future displays for newer products and the replacement process when units get
older. Input from sales staff on options to consider is also very important, since
remodeling and new home segments require two different thought processes.
Scherer Bros. Lumber Co.
Headquarters
Brooklyn Park, Minnesota
Retail Locations
Arden Hills, Minnesota
Hopkins, Minnesota
Shakopee, Minnesota
Annual Sales
Not Given
Customer Focus
Company Background
Scherer Bros. Lumber Co. is a privately
owned company serving contractors
and do-it-yourself customers
throughout Minnesota and western
Wisconsin. The company was started
in 1930 by brothers Munn and
Clarence Scherer, and has grown
into an award-winning company with
operations at six facilities.
Showroom
The 5,500 sq. ft. showroom at the
company’s Hopkins location was
updated in 2007.
Homeowner
Builder
Remodeler
15%
40%
45%
12
An Interview with Mark Porath, Windows / Doors Specialist at Van’s Lumber &
Custom Builders, Inc.:
Q: Why did you decide to redo your showroom recently?
A: We wanted to expand our window and door area so that customers can see full
displays rather than looking at a catalog. We’re taking a 600 sq. ft. conference
room and converting that space into more showroom area. We believe this
investment will help support our installed sales programs for windows, doors,
siding and roong.
Q: How long will it take from the decision to update the showroom until it is completed?
A: About three months.
Q: What specic type of assistance did you get from manufacturers and suppliers when
creating the new showroom?
A: Because this showroom expansion focuses primarily on windows and doors, we
leaned on our Therma-Tru territory manager to help us select the appropriate
doors and options we should be showing. Now we have more decorative glass
selections, door skins and door styles in our showroom. For windows, we also
added a wider display selection.
Q: How does your company and your showroom bring value to your customers?
A: We are a design / building company with our own draftsman on staff. People can
come to our location and we can show them the actual products that are being
drawn into their home plans. We’re there every step of the way with our customers
from creation of the plans to installation of windows, doors, siding and roong.
People like the fact that we take care of the job from start to nish.
Q: How do you encourage your builder and remodeler customers to use your showroom
for use with their homeowner customers?
A: We always encourage builders and remodelers to send their homeowner
customers to our showroom. When customers see rsthand the quality of the
products we offer, our chances of completing the sale increase.
Q: What tips do you have for other dealers who are thinking of redoing their showroom?
A: Make a strategic choice to display product from reputable manufacturers who
have proven products and great customer service.
Van’s Lumber & Custom
Builders, Inc.
Headquarters
Luxemburg, Wisconsin
Locations
Luxemburg, Wisconsin
Dyckesville, Wisconsin
Egg Harbor, Wisconsin
Annual Sales
Not Given
Customer Focus
Contractors, Homeowners
and Remodelers
Company Overview
Started in 1950, Van’s Lumber &
Custom Builders, Inc., is owned
and operated by third generation
members of the VandenHouten
family – brothers Craig, Chris, Eric
and Kurt. The company specializes
in the construction of residential
custom homes and light commercial
construction. The company also has a
retail lumberyard and hardware store
offering a multitude of products for
do-it-yourself home projects, plus a
wide assortment of building materials
for contractors. Van’s Lumber &
Custom Builders has a reputation of
being a “one-stop shop” for windows,
roong, siding, doors, trim, stairways
and storm doors.
Showroom
The company added 600 sq. ft. to
its original, 3,500 sq. ft. showroom in
Dyckesville in 2013.
13
An Interview with Pete Meichtry, Vice President of Merchandising, Purchasing and
Advertising at Ganahl Lumber Company:
Q: In 2012, your company opened a new Pasadena showroom location with 6,000 sq. ft.
of space. Why was this location selected and how successful has it been?
A: We wanted to expand into the Los Angeles County market, so Pasadena was ideal
for us. We really believe we’ve created the premier window and door showroom in
Los Angeles County. Vendors and manufacturers continually send their customers
to this showroom because of how attractively it displays their products and the
professionalism of our staff.
Q: How long did it take your company, from the decision to build to the
facility completion?
A: This was a 24-month project for Ganahl Lumber.
Q: What is unique about the Pasadena showroom?
A: This showroom is open seven days a week to encourage professionals and
homeowners to visit and get inspired for their projects.
Q: When you opened the Pasadena location, you chose not to add new brands or take
away older brands. Why?
A: That’s correct. We want to maintain a consistent companywide offering at all our
locations, so we stick with the same valued vendors. These companies are our
strategic partners in so many ways.
Q: Who are some of your key suppliers for the showroom?
A: We focus a lot on doors and windows at this location. We’re fortunate to have major
suppliers involved including Andersen, Marvin, JELD-WEN, Therma-Tru, LaCantina,
Milgard and Western Window.
Q: This past July, you ran a special “Doors on Tour” at the showroom. How did that
work out?
A: The “Doors on Tour” was a great idea that Therma-Tru worked on with us. There
was a trailer of doors at the Pasadena location for 60 days and special discounts
were offered. This gave a “limited time” feel to the promotion and really helped get
our area excited about berglass doors. Once the “tour” was over, the trailer of
doors moved on to our Anaheim location for a continuation of the promotion. Sales
are up at both locations as a result of this unique special activity.
Q: What was one of the most important goals in opening this location for
Ganahl Lumber?
A: While we provide high visibility to all our key vendors in our showroom through
working product models in vignettes, we chose to lead with the manufacturers who
offer the most architecturally relevant designs for the Pasadena area. By focusing
on the very specic design styles and needs for Pasadena, we’ve been able to
make a major impact in this marketplace.
Q: What has been the result of being in the Pasadena market?
A: Since this was a new market for Ganahl Lumber, it’s taken about a year to become
established in this location. After our rst full scal year in Pasadena, door and
window sales grew 60% year-over-year, which shows that we can have a major
impact in this marketplace.
Q: What tips would you give another dealer thinking of adding or redoing
their showroom?
A: First of all, a well-designed and aesthetically pleasing showroom design is
important. However, hospitality and a well-trained staff of professionals is equally
important to your success.
Ganahl Lumber Company
Headquarters
Anaheim, California
Locations
Pasadena, California
Anaheim, California
Buena Park, California
Capistrano Beach, California
Costa Mesa, California
Corona, California
Laguna Beach, California
Lake Forest, California
Los Alamitos, California
Annual Sales
$249 Million
Customer Focus
Company Overview
Celebrating 130 years of business
in 2014, Ganahl Lumber Company
has nine (soon to be 10) locations in
southern California. The family- and
employee-owned business offers a
wide selection of lumber, plywood,
panels, moulding, doors, windows,
paint and other building materials.
Showroom
The company opened a new
6,000 sq. ft. showroom in Pasadena
in 2012.
Homeowners
Trade Professionals
90%
10%
14
An Interview with Dean Conrad, Vice President of Purchasing & Marketing at YBC:
Q: The big story for YBC is the 10,000 sq. ft. “YOUR Home Solutions Center” that
opened in the autumn of 2013. What’s the history behind this showroom?
A: We had extensive discussions with our builder and remodeler customers back in
2006 to determine what they needed in a showroom, then we started construction
of our new Williamsport, Pennsylvania, showroom in the winter of 2007. When the
recession hit in 2008, we backed off the project and only started working again
on it during the winter of 2011. The showroom was nished and opened this past
autumn.
Q: What is unique about the Williamsport showroom?
A: We listened to our partnered customers. They asked for a location that showcases
major product lines 24 hours a day, 7 days a week, and we delivered.
Q: How do your customers maximize the use of the showroom?
A: Builders and remodelers can either bring their customers into the showroom (24/7
for our partnered builders and remodelers who meet certain purchasing criteria) to
view products or they can bring their customers in during regular business hours
and our team will do product presentations for them with the builder or remodeler
present. There’s also the option to send the customer to the showroom on their
own and we’ll make presentations and sell the project based on the guidelines
and nancial allowances provided by the builder or remodeler. Additionally, we
offer after-hours appointments to t the customer’s schedule.
Q: What did your customers request for the new showroom that they’ll nd at the
Williamsport YBC location?
A: There are dozens of key suppliers represented in this showroom. We expanded
our kitchen and bath displays and ooring department to offer more updated
product selections. And, we expanded the display area for some of the windows,
doors, siding, trim, decking and railing companies that have proven their success
with us over time.
Q: How did you decide which brands to display?
A: We focused on products that are (or are perceived to be) the top suppliers for their
category. YBC is proud to offer top brand name products at competitive prices
that contractors like to use and homeowners know and trust.
Q: Who are the top three suppliers with the most visibility in your showroom?
A: MasterBrand Cabinets has more than 50 kitchen and bath vignettes. We have
one of the largest Anderson Window Galleries on the East Coast. And there are
36 Therma-Tru® doors on display in the showroom, plus the company’s latest
technology showing door glass offerings on a 40-inch at screen television
running in a continuous loop.
Q: You’ve been open just a few months now. How have sales been since then at
this location?
A: Since the grand opening in September of 2013 our trafc count and sales are up
substantially, and we expect to see continued growth of sales and margins in the
coming years. Our new partner builder and remodeler program also continues to
grow on a daily basis as these industry professionals see the value in accessing
the showroom after hours with their key fob.
Q: What tip would you give another dealer thinking of adding or expanding
their showroom?
A: Talk to your customer base. Ask them what they need to help them sell and close
more jobs. This way you’re honing in on products to display what will bring you
more sales and meet the needs of your customers.
Q: What are you personally most excited about regarding your new showroom?
A: This showroom lls a need for our remodeler and builder customers. When the
homeowner can make selections by seeing the product in person as it will appear
in their home, it should make the selling process much easier for our customers.
Since many people “buy what they see” in our showroom, this is a win-win
solution for everyone.
Your Building Centers
Headquarters
Altoona, Pennsylvania
Location
Williamsport, Pennsylvania
Annual Company Sales
$80 Million
Customer Focus
Company Background
Since starting in 1988,
employee-owned Your Building Centers
(YBC) has grown to 14 retail lumber
and building materials locations, plus a
100,000 sq. ft. manufacturing operation
for roof and oor trusses, wall panels,
countertops and interior doors.
Showroom
After years of planning and
construction, a new 10,000 sq. ft.
showroom opened at the company’s
Williamsport, Pennsylvania, location
in 2013.
Homeowners
Builders
Remodelers
60%
10%
30%
15
An Interview with Steve Caudill, General Manager of Pro-Build Wilmington
Q: Your recent showroom project at Pro-Build Wilmington gives you 10,000 sq. ft. of
space. Why did you undertake such a large project?
A: We wanted to provide a place where builders could come in to make product
selections or just as easily send in their homeowner customers to make those
choices. By having an expansive showroom we’re able to showcase
“good, better, best” product options by our select vendors to increase upsell
opportunities to our customers.
Q: How has the new showroom helped you be competitive in your marketplace?
A: First of all, we moved quickly with the showroom project. It was done in just six
months so we could start using it as soon as possible. Second, the space in the
showroom allows us to position ourselves as a high-end millwork center. Most of
our competitors simply can’t show the same broad array of products as us due to
their space limitations.
Q: What strategies did you use to decide on which products would be promoted in the
new showroom?
A: We did our research and found that in certain product groups we were offering
too many choices, which was confusing our customers. An example of this would
be composite decking. Originally we offered six different brands of composite
decking. For the new showroom, we partnered with just the one industry leader
and now showcase their full line of decking and railing.
Q: What criteria did you use to decide on which brands to add or eliminate?
A: We looked at strength of the company, product selection, warranty and eld
representation. These were all critical issues that led to our strategic alliance with
key suppliers.
Q: So, who are the key suppliers in your showroom?
A: Our top suppliers include Andersen, Therma-Tru, JELD-WEN and TimberTech.
Q: How has the new showroom affected your sales?
A: The new showroom allows us to offer more product selection and higher-end
millwork products. For example, in the berglass door category, we can now
show a customer anything from a 6-panel Smooth-Star® door to a Classic-Craft®
Mahogany CollectionTM door with different decorative glass options.
Q: Is there one key addition to the showroom that has really been an asset for
Pro-Build Wilmington?
A: Absolutely. We put in a private conference room where builders can meet with
their customers. This way builders get their clients into the showroom and meet
with them here to make all their product selections at one time. I’d say our foot
trafc in the new showroom has increased by 25%, which is positively impacting
our sales.
Q: What tips would you have for other dealers who are thinking of redoing
their showrooms?
A: Keep your showroom clean and uncluttered. You don’t have to have a massive
amount of space to have a strong showroom. Utilize the space you have and
keep the product offering updated. And add an exterior sign that says “Showroom
Open to the Public” to increase walk-in business.
Pro-Build of Wilmington
Headquarters
Denver, Colorado
Location
Wilmington, North Carolina
Annual Sales
Not Given
Customer Focus
Company Background
For the past nine years, Pro-Build
of Wilmington, North Carolina, has
focused on meeting the needs of
builders, contractors and do-it-
yourselfers. The location is one of 450
Pro-Build stores across the country.
Showroom
The Wilmington location features a
10,000 sq. ft. showroom that helps
the company defend its
marketplace position.
Homeowner
Builder
Remodeler
20%
10%
70%
©2014 Therma-Tru Corp. All rights reserved. THERMA-TRU and the Therma-Tru Logo are trademarks of
Therma-Tru Corp. Registered trademarks are registered in the U.S. and may be registered internationally.
Therma-Tru Corp. is an operating company of Fortune Brands Home & Security, Inc.