Thermor 312TX Wireless Thermometer with clock User Manual manual

Download:
Mirror Download [FCC.gov]
Document ID	1163919
Application ID	MrJwSsVLCpa0RH/cEWhvZw==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.96kB (111950 bits)
Date Submitted	2009-09-03 00:00:00
Date Available	2009-09-04 00:00:00
Creation Date	2009-07-24 11:38:55
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-07-24 11:38:55
Document Title	Microsoft Word - 312英文说明书.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	cathy

Instruction manual
Thank you for buying AN-PL6029.In order to fully master all functions, please kindly read the IM before
using.
1. Main function:
● Radio controlled clock for DCF77
● 8 keys of ‘SET’,
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
‘
‘, ‘
‘,‘
‘，
,Ch, Mem, Snooze/light
6 digits to display hour, minute and second.
Indoor and outdoor temperature display in ℃/℉.
Trend of indoor and outdoor temperature display.
Upper limit and lower limit alert function for Indoor/outdoor temperature
Memory for Max. or Min. indoor temperature and humidity.
Memory Max and Min value for outdoor temperature.
Time is 12/24 format.
Week display in 7 languages of English, German, French, Italian, Spanish, Dutch and Danish.
Single alarm
Daily alarm and snooze function
3 levels comfort indication.
3 RF wireless channels (1 piece outdoor sensor included)
RCC receive mode in DCF.
World time zone setting of -12/+12.
Daylight saving time function
8 kinds of moon phrase
LED backlight
Indoor temperature:0℃(32℉) to 50℃(122℉)
● Indoor humidity 20% to 95%.
● Outdoor temperature :-20℃(-4℉) to 60℃(140℉)
●
●
●
●
Transmission range: 30m
Low battery detector for indoor and outdoor unit
Requires 2*AA batteries
Transmitter: 2*AA batteries
2. Key controlling function
Function
controlling
SET
Pres
once
---
HOLD
CLOCK
setti
ng
Ch
Mem
12H/24H
switch
℃/℉
SNOOZE
mode
Switch
betwee
CH1,2,
On/off
alert
function
MAX/MIN
---
---
---
Regist
er
presen
channe
Temperat
ure
limit
setting
Clear
max/min
memory for
temperatur
e and
humidity
---
Ahead by
one step
Back
by one
step
BACK
LIGHT
---
---
---
---
---
Ahead by
steps/se
c.
Back
by 8
steps/
sec.
---
---
---
---
---
Confi
rm
setti
ng
Ahead by
one step
Back
by one
step
BACK
LIGHT
---
---
---
HOLD
---
---
Ahead by
steps/se
c.
Back
by 8
steps/
sec.
---
---
---
---
Pres
Temperatu
re alert
setting
HOLD
---
---
Ahead by
one step
Back
by one
step
BACK
LIGHT
Choose
the
channe
Confirm
setting
---
---
---
Ahead by
steps/se
c.
Back
by 8
steps/
sec.
----
---
---
---
Standard
mode
Time
setting
pres Confi
rm
Alarm
setting
On/of
ALARM
ALARM
setti
ng
setti
ng
HOLD
pres
3. Operation
3.1Common mode
●
●
●
●
●
LIGHT/
SNOOZE
Hold SET to time setting
Press
to turn on/off alarm.
Hold
more than 2 seconds to alarm setting mode
Press
to switch between 12/24 hours.
Press
to switch between ℃/℉
●
●
●
●
●
●
●
●
●
●
Hold
more than 2 seconds to RCC receiving mode
Press MEM to check max./min. value of temperature and humidity.
Hold MEM more than 2 seconds to clear all memory for temperature and humidity
Press
to turn on/off temperature
Hold
more than 2 seconds to temperature alert setting mode.
Press CH to choose RF channel in order of CH1→CH2→CH3→CH1
Hold CH more than 2 seconds to register present channel.
Press SNOOZE/LIGHT to turn on backlight for 5 seconds.
In RCC receiving state, hold” more than 2 seconds to exit RCC receiving mode.
When alarming, press SNOOZE/LIGHT once into 5 minutes snooze mode.
3.2．Time setting
● Hold SET more than 2 seconds to time setting and setting item will be twinkling by 1 HZ.
● Setting order is year, month, day, language, hour, minute and OFFSET. Exit when finish.
● Press
to be ahead by one step and hold more than 2 seconds to be ahead by 8 steps/second.
● Press
to back by one step and hold more than 2 seconds to back by 8 steps/second.
● .Moon phase and week icons change according to the change of year, month and day.
● Without any handling in 8 seconds, exit the setting mode and save the set value.
3.3 Alarm setting mode
● Press more than 2 seconds to alarm mode and set item is twinkling by 1 HZ.
● Setting order is hour and minute.
● Press
to be ahead by one step and hold more than 2 seconds to be ahead by 8 steps/second.
● Press
to back by one step and hold more than 2 seconds to back by 8 steps/second.
● Press
to confirm set.
● Without any handling in 8 seconds, exit the setting mode and save the set value.
● Press
to turn on/off alarm.
3.4 Temperature alert setting.
● Hold
2 seconds to alert setting.
● Setting order is upper limit→lower limit→exit
● When set upper limit or lower limit, press CH to switch between different channels.
● Upper limit temperature is -49℃～+70℃ and lower limit is -50℃～+69℃.
● Hold
to confirm setting and turn to next setting item.
● Press
once and setting value will ahead one step. Hold for 2 seconds, setting value will be ahead
by 8 steps/sec..
● Press
and setting value back one step; Hold for 2 seconds, setting value will back by 8
steps/sec..
● .Press any key to stop alarm but the temperature and alarm signal will still twinkle and then stop
until the temperature return to setting temperature.
● Press
to turn off temperature alarm
●
4. Start and Re-set
4.1 ●.When open or re-set, LCD display for 3 second and LED backlight turn on for 3
seconds with BI then go to standard mode. After getting the temperature and humidity,
turn to RF receiving for 3 minutes and then to RCC receiving. Exit after 7 minutes no
matter receive or not.
● Calendar default as 0:00 1st Jan., 2000.
●
●
4.2
●
●
Alarm default as 0:00.
Temperature default as ℃; Time is 24HR; RF is in CHANNEL 1.
Temperature and humidity
Indoor temperature range of 0℃～+50℃(32℉～+122℉)
Humidity range of 20%～95%
4.3 Comfort icon
● Non-comfortable: When temperature is any value and humidity below 40% or beyond 70%.
● Comfortable: When temperature is between 20℃～28℃ and humidity is 40%～70%.
Notice:
Choose a suitable place for the base unit and remote outdoor sensor. Place the base unit near a window,
but away from direct sunlight or other sources of heat or air condition to ensure accurate air
temperature readings.
The remote sensor should be located away from direct sunlight and sheltered from the rain. Locate the
sensor unit in a clear area to avoid signal interference. The maximum transmission distance from the
remote sensor to the base station is 30m in open space. Actual transmission distance may be reduced
by interference from buildings, obstructions or a screen between the sensor and the base station.
Battery Operated item
• Do read the instructions for battery replacement. Make sure to insert new batteries correctly,
following the symbols for positioning the positive (+) and negative (-) ends of each battery.
• Do replace batteries with the size and type specified in instruction manual. Remove all
batteries from the product at the same time.
• Do store batteries in a cool, dry place at normal room temperature. Remove batteries from
devices that will be stored unused for extended periods.
• Do dispose of batteries according to the local laws and regulations of your region. Some
batteries may be recycled, and may be accepted for disposal at your local recycling center.
• Batteries may present a risk of fire, explosion, or chemical burn if mistreated.
• Do not disassemble, puncture, modify, drop, throw, or cause other unnecessary shocks to
batteries.
• Do not dispose of batteries in a fire or trash incinerator, or leave batteries in hot places such as
an automobile under direct sunlight.
• Do not store batteries near an oven, stove, or other heat source.
• Do not connect batteries directly to an electrical source, such as a building outlet or automobile
power-point.
• Do not place batteries into a microwave oven, or into any other high-pressure container.
• Do not immerse batteries in water or otherwise get them wet.
• Do not short circuit batteries; for example, do not carry loose batteries in a pocket or purse
with other metail objects, which may inadvertently cause a battery to short circuilt.
• Do not use batteries, or charge rechargeable batteries, that appear to be leaking, discolored,
rusty, deformed; emit an odor; or are otherwise abnormal.
• Do not touch leaking batteries directly; wear protective material to remove the batteries and
dispose of them properly immediately.
• Do not reverse the polarity (positive and negative terminals) of batteries.
• Do not mix used and new batteries, or install used batteries in other equipment.
•
•
•
Do not charge non-rechargeable batteries, or use unspecified charging instructions or
equipment for rechargeable batteries.
Do not give batteries to young children, or store batteries where children may access them.
Do not put batteries in mouth. If swallowed, contact physician or local poison control center
immediately.
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also
complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause undesired operation of the device.
Canada Statement
This Device complies with RSS-210 of the IC Rules, Operation is subject to the following two
conditions:
(1). This device may not cause interference and
(2).This device must accept any interference received,, including interference that may cause
undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:07:24 11:38:55+08:00
Create Date                     : 2009:07:24 11:38:55+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 312英文说明书.doc
Creator                         : cathy
Document ID                     : uuid:455746ce-f3bd-4207-9601-89bc417dbdb8
Instance ID                     : uuid:5949f88e-ac74-429a-b97d-3b48ef039ac5
Page Count                      : 5
Author                          : cathy

EXIF Metadata provided by EXIF.tools