Thomson 2-7901A 2.4GHz CORDLESS TELEPHONE SYSTEM-BASE User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	709211
Application ID	SZDfo06G7Wat8Bl++I3BEA==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	57.88kB (723478 bits)
Date Submitted	2006-09-26 00:00:00
Date Available	2006-09-27 00:00:00
Creation Date	2006-07-13 15:57:56
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2006-07-13 15:58:09
Document Title	USERS MANUAL
Document Creator	Adobe InDesign CS2 (4.0)

Model 27901 Series
2.4 GHz Cordless
Telephone System
User’s Guide
Waiting for new
artwork
Equipment Approval Information
Your telephone equipment is approved for connection to the Public Switched Telephone Network
and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical
Requirements for Telephone Terminal Equipment published by ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among other information, the US number
and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this
information to your telephone company.
The REN is useful in determining the number of devices you may connect to your telephone line
and still have all of these devices ring when your telephone number is called. In most (but not all)
areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain
of the number of devices you may connect to your line as determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for
details.
Notes
• This equipment may not be used on coin service provided by the telephone company.
• Party lines are subject to state tariffs, and therefore, you may not be able to use your own
telephone equipment if you are on a party line. Check with your local telephone company.
• Notice must be given to the telephone company upon permanent disconnection of your
telephone from your line.
• If your home has specially wired alarm equipment connected to the telephone line, ensure
the installation of this product does not disable your alarm equipment. If you have questions
about what will disable alarm equipment, consult your telephone company or a qualified
installer.
US Number is located on the cabinet bottom.
REN Number is located on the cabinet bottom.
Model 27901
00015465 (Rev. 0 Dom E)
06-28
Printed in China
Thomson Inc.
10330 North Meridian Street
Indianapolis, IN 46290
© 2006 Thomson Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
Handset Layout
2 Rights of the Telephone Company
Should your equipment cause trouble on your line which may harm the telephone network,
the telephone company shall, where practicable, notify you that temporary discontinuance of
service may be required. Where prior notice is not practicable and the circumstances warrant
such action, the telephone company may temporarily discontinue service immediately. In case
of such temporary discontinuance, the telephone company must: (1) promptly notify you of such
temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform
you of your right to bring a complaint to the Commission pursuant to procedures set forth in
Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment,
operations or procedures where such action is required in the operation of its business and not
inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or
performance of your telephone equipment, the telephone company must give you adequate
notice, in writing, to allow you to maintain uninterrupted service.
Introduction
Interference Information
Make sure your package includes the items shown here.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference; and (2) This device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
Privacy of Communications may not be ensured when using this product.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is
“receiving” the interference).
• Reorient or relocate and increase the separation between the telecommunications
equipment and receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit different from that to
which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult your dealer or an experienced
radio/television technician for additional suggestions. Also, the Federal Communications
Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference
Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C.
20402. Please specify stock number 004-000-00345-4 when ordering copies.
Notice: The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Hearing Aid Compatibility (HAC)
This telephone system meets FCC standards for Hearing Aid Compatibility.
Licensing
Licensed under US Patent 6,427,009.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body. This transmitter must not be co-located or
operated in conjunction with any other antenna or transmitter.”
CAUTION: When using telephone equipment, there are basic
safety instructions that should always be followed. Refer to the
IMPORTANT SAFETY INSTRUCTIONS provided with this product
and save them for future reference.
IMPORTANT: Because cordless phones operate on electricity, you
should have at least one phone in your home that isn’t cordless, in
case the power in your home goes out.
Before You Begin
Parts Checklist
CAUTION:
WARNING: TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSE THIS
PRODUCT TO RAIN
OR MOISTURE.
THE LIGHTNING
FLASH AND ARROW
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
vol/cid - or +
(button)
talk (button)
ringer/on-off (switch)
flash/menu (button)
chan/delete
(channel/delete button)
mem
(memory button)
format (button)
Base
Handset
battery pack
Telephone Jack Requirements
pause# (button)
*/tone exit
(button)
Telephone
line cord
AC power
adaptor
To use this phone, you need an RJ11C type modular telephone
jack, which might look like the one pictured here, installed in your Modular
telephone
home. If you don’t have a modular jack, call your local phone
line jack
company to find out how to get one installed
Installation
Digital Security System
Your cordless phone uses a digital security system to protect against false ringing,
unauthorized access, and charges to your phone line.
INSTALLATION NOTE: Some cordless telephones operate at
frequencies that may cause or receive interference with nearby
TVs, microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be
placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther away
from these appliances.
Certain other communications devices may also use the 2.4 GHz
frequency for communication, and, if not properly set, these
devices may interfere with each other and/or your new telephone.
If you are concerned with interference, please refer to the owner’s
manual for these devices on how to properly set channels to avoid
interference. Typical devices that may use the 2.4 GHz frequency
for communication include wireless audio/video senders, wireless
computer networks, multi-handset cordless telephone systems, and
some long-range cordless telephone systems.
• Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave
ovens, heating appliances and direct sunlight.
• Avoid areas of excessive dust, moisture and low temperature.
• Avoid other cordless telephones or personal computers.
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the telephone line
has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
Exit
5. The charge/in use indicator turns on, verifying the battery is charging. The unit will
take 20 seconds to register and verify its security code.
This feature allows you to restore the unit’s original features.
Press the */tone exit button to cancel any command you initiated.
1. Press the flash/menu button until DEFAULT shows in the display.
Ringer On/Off
CAUTION: Use only the 5-2616 (black) or 5-2617 (gray) power
adapter that came with this unit. Using other power adapters
may damage the unit.
VERY IMPORTANT: HANDSET MUST BE REGISTERED TO THE MAIN
BASE BEFORE USE.
Date and Real Time Clock Setting
1. Press and hold the Sel button until the hour digits is flashing.
2. Press and hold the Adj button to advance hour setting increment.
3. When the correct hour is set, press the Sel button to confirm and the minute digit will
flash.
Installing the Phone
Installing the Handset Battery
NOTE: You must connect the handset battery before use.
CAUTION: To reduce the risk of fire or personal injury, use only
the Thomson Inc. approved Nickel-Cadmium (Ni-Cd) battery
model 5-2522 that is compatible with this unit.
1. Locate battery and battery door which are packaged together inside a plastic bag
and are separate from the handset.
2. Screw off the rings at the both of the ends and open the handset back.
3. Locate the battery compartment on the back of the handset.
4. Plug the battery pack cord into the jack inside the compartment.
NOTE: To ensure proper battery installation, the connector is keyed
and can be inserted only one way.
Rings are not on the
battery
handset, they are put
pack
in giftbox sperated
red wire
with the handset.
PRESS DOWN
FIRMLY
black wire
6. Close the handset back and screw up the rings at both of the ends.
1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and
place your cordless telephone on a level surface, such as a desktop or tabletop, or
you may mount it on the wall.
Waiting for new
artwork
3. Plug the AC power converter into the electrical outlet and the DC connector into the
jack on the bottom of the base.
Making a Call
1. Press the talk button and dial the desired number.
-OR-
To perform preview dial, dial the number first then press the talk button.
2. To hang up, press the talk button or place the handset in the cradle.
Receiving a Call
1. To answer a call press the talk button on the handset before you begin speaking.
Redial
Press the redial button to quickly dial the last number you called (up to 32 digits).
6. When the correct Month is set, press the Sel button to confirm and the date digit will
flash.
If you get a busy signal, and want to keep dialing the number, press redial to dial the
number again.
7. Press and hold the Adj button to advance the date setting increment.
In Use Indicator
8. When the correct date is set, press the Sel button to confirm and the unit will return
to standby display.
Handset Setup
There are five programmable menus available: Language, Local Area Code, Ringer
Tone, Tone/Pulse and Factory Default. When you program these settings, make sure the
phone is OFF (not in talk mode). Pressing the */tone exit button will remove you from the
menu selection process without changing the feature you are in.
Display Language
1. Press the flash/menu button until 1ENG 2FRA 3ESP shows in the display.
2. Use the vol/cid (- or +) button or the handset number pad to select 1 (English), 2
(French), or 3 (Spanish). The default setting is 1ENG.
3. Press the flash/menu button to confirm and to advance to the next menu feature.
Local Area Code
If you enter your local 3-digit area code in the area code menu, your local area code
does not display on the Caller ID (CID) list. Instead, you only see the local 7-digit number.
Calls received from outside your local area code will display the full 10-digit number.
1. Press the flash/menu button until AREA CODE - - - shows in the display. The default
setting is - - -.
NOTE: If you make a mistake, press the chan/delete button to erase
the incorrect area code and repeat step 2.
Ringer Tone
When the charge/in use indicator on the base is lit, the handset is either in use or
charging. The charge/in use indicator on the base flashes when you receive a call.
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company you will receive Caller ID information (if available) on Call Waiting
calls. During a phone call, you will hear a beep to indicate another call is waiting on
the line and Caller ID information for the waiting call shows on the handset display. To
connect the waiting call, press the flash/menu button on the handset and your original
call is put on hold. You may switch back and forth between the two calls by pressing
the flash/menu button.
TIP: Do not use the talk button to activate custom calling services
such as call waiting, or you’ll hang up the phone.
Volume
When the phone is ON, press the vol/cid (- or +) on the handset to adjust the volume of
the handset’s earpiece. There are four settings. Press the vol/cid + button to increase
the volume and vol/cid - button to decrease the volume. You will see the volume setting
on the handset display. VOL 4 is the maximum and VOL 1 is the minimum.
Channel Button
While talking on the phone, you might need to manually change the channel in order
to reduce static caused by appliances, such as baby monitors, garage door openers,
microwave ovens, or other cordless phones. Press and release the chan/delete button
to move to the next clear channel.
Temporary Tone
2. Use the vol/cid (- or +) button or the handset number pad (1-3) to enter your
selection from Ringer Tone 1, 2, or 3. The default setting is RINGER TONE 1.
3. Press the flash/menu button to confirm and to advance to the next menu feature.
1. Dial the telephone number and wait for the line to connect.
Tone/Pulse
2. When your call is answered, press the */tone exit button on the handset to
temporarily change from pulse dialing to tone dialing.
1. Press the flash/menu button until RINGER TONE shows in the display.
1. Press the flash/menu button until 1 TONE 2 PULSE shows in the display.
2. Use the vol/cid (- or +) button or the handset number pad to enter your selection. The
default setting is 1 TONE.
1. Press ringer button to enter the ringer on/ off setting menu and current setting will
show in display.
2. Press ringer button again to select the setting and you will hear the confirmation
tone.
NOTE: If you turn the ringer OFF, RINGER OFF shows in the display.
Paging the Handset
This feature helps to locate a misplaced handset.
Press the page button on the base. The handset will beep for about two minutes or until
you press talk on the handset or press the page button on the base.
NOTE: You can still page the handset if the ringer is turned off. If the
battery is dead, the Paging feature will not work.
Caller ID (CID)
IMPORTANT: In order to use this unit’s Caller ID features, you must
subscribe to either the standard Name/Number Caller ID Service or
Call Waiting Caller ID Service. To know who is calling while you are
on the phone, you must subscribe to Call Waiting Caller ID Service.
This unit receives and displays information transmitted by your local phone company.
This information can include the phone number, date, and time; or the name, phone
number, date, and time.
Time
Date
Flash
This feature is useful only if you have pulse (rotary) service. Temporary Tone Dialing
enables pulse (rotary) service phone users to access touchtone services offered by
banks, credit card companies, etc. For example, when you call your bank you may need
to enter your bank account number. Temporarily switching to touchtone mode allows
you to send your number.
3. Press the flash/menu button to confirm and to advance to the next menu feature.
2. Plug one end of the telephone line cord into the TEL LINE jack on the bottom of the
base and the other end into a modular jack.
Cordless Phone Basics
5. When the correct minute is set, press the Sel button to confirm and the Month
characters will flash.
3. Press the flash/menu button to confirm and to advance to the next menu feature.
Base Station
3. Press flash/menu to confirm. You will hear a confirmation tone.
2. To hang up, press the talk button or place the handset in the cradle.
2. Use the handset number pad to enter your 3-digit area code.
5. Insert the battery pack.
2. Use the vol/cid (- or +) button to scroll to YES. The default setting is NO.
4. Press and hold the Adj button to advance the minute setting increment.
5. Press and hold the Adj button to select the month.
Handset
Wall plate
Factory Default
6. Allow the phone to charge for 16 hours prior to first use. If you don’t properly charge
the phone, battery performance is compromised.
redial (button)
Important Installation Guidelines
RISK OF ELECTRIC SHOCK
DO NOT OPEN
display
4. Set the ringer switch (on the handset) to ON, and place the handset in the cradle on
the base.
3. Follow the automated instructions to get the information you need.
4. Hang up the handset and the phone automatically returns to pulse (rotary) dialing
mode.
Number of calls
Caller ID phone
number
Caller ID
name
Call Waiting Caller ID
Provided you subscribe to Call Waiting Caller ID service from your phone company; if
you receive an incoming call and you are already on the phone, a beep indicates the
presence of a Call Waiting call on the line. Only the handset that is in use at the time of
the call will display and store the Call Waiting Caller ID information.
• When you hear the call waiting beep in the handset receiver, press the flash/menu
button to put the current call on hold and answer the incoming call. Press flash/
menu again to return to the original call.
Receiving CID Records
When you receive a call, the Caller ID information is transmitted between the first and
second ring. The Caller ID information appears on the display while the phone rings,
giving you a chance to monitor the information and decide whether or not to answer
the call.
Storing CID Records (In CID Memory)
If you are not at home or cannot answer, your telephone’s Caller ID memory stores the
data for the 40 most recent calls you received so you can see who called while you
were unavailable. When the 41st call is received, the oldest Caller ID record (1st call) is
automatically deleted.
You may review the stored information at any time. Calls received since your last
review show as NEW in the display. Calls that have not been previously reviewed but
were received from the same number more than once show as REPT in the display.
Reviewing CID Records
As calls are received and stored, the display is updated to let you know how many calls
have been received. To scroll CID records:
1. Make sure the phone is OFF (not in TALK mode).
2. Press the vol/cid (-) button to review the newest CID record.
3. Press the vol/cid (+) button to review the oldest CID record first.
Dialing a CID Number
1. Make sure the phone is OFF (not in TALK mode).
2. Use the vol/cid (- or +) button to display the desired record.
3. Press the talk button. The number dials automatically.
NOTE: Depending on (a) how the incoming caller’s phone number is
formatted when it is received, and (b) whether or not you previously
pre-programmed your local area code into the set up menu, you
may need to adjust the format of the incoming caller’s stored phone
number before making the call, press the FORMAT button to adjust
the number, and try again
Available formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
Explanation
Example
long distance code “1 ”
+3-digit area code
+7-digit telephone number.
1-317-888-8888
3-digit area code +
7-digit telephone number.
317-888-8888
7-digit telephone number.
888-8888
Storing CID Records in Internal Memory
You may also store CID information in the phone’s internal memory.
NOTE: It is important that you format CID records correctly BEFORE
storing in internal memory as you cannot reformat CID records
stored in memory.
1. Make sure the phone is OFF (not in TALK mode).
2. Use the vol/cid (- or +) button to scroll to the desired CID record.
3. Press the mem button.
4. Use the touch-tone pad to enter a memory location (0-9) to store the number in that
memory location. You will hear a confirmation tone.
NOTE: If the memory location is occupied, REPLACE MEMO? is
displayed, and you must confirm replacement by pressing the mem
button.
NOTE: Press the */tone exit button once to keep the previous setting
(making no changes) and return to the menu.
NOTE: If the selected CID record contains any information that is nonnumeric, the unit will not allow this record to transfer to the internal
user memory. The handset will display UNABLE TO STORE.
To Replace a Stored CID Record
1. Repeat steps 1 through 3 in Storing CID Records in Internal Memory. After you enter
the memory location, REPLACE MEMO? shows in the display.
2. Press the mem button again, and the new CID record replaces the old memory in
that location. You will hear a confirmation tone.
Deleting a CID Record
1.
2.
3.
4.
Make sure the phone is OFF (not in TALK mode).
Use the vol/cid (- or +) button to display the CID record you want to delete.
Press chan/delete. The display shows DELETE CALL ID?.
Press chan/delete again to erase the record and the next Caller ID record shows in
the display. You will hear a confirmation tone.
NOTE: Press the */tone exit key to return to the standby mode.
Deleting All CID Records
1.
2.
3.
4.
Make sure the phone is OFF (not in TALK mode).
Use the vol/cid (- or +) button to display any Caller ID record.
Press and hold the chan/delete button until DELETE ALL? shows in the display.
Press chan/delete again to erase all records. You will hear a confirmation tone. The
display shows NO CALLS.
NOTE: Press the */tone exit key to return to the standby mode.
Memory
Each handset can store up to ten 24-digit numbers with up to 15-character names in
memory for quick dialing. This memory feature is in addition to the CID memory log,
which stores up to 40 CID records in each handset.
Storing a Name and Number in Memory
1. Make sure the phone is OFF (not in TALK mode).
2. Press the mem button.
3. Press the desired memory location (0 through 9) or use vol/cid ( + or - ) to scroll to the
desired memory location.
NOTE: If the memory location is occupied, the memory location
number and stored name and telephone number shows in the
display. If the memory location is empty. EMPTY shows in the display.
4. Press the mem button again. The display shows ENTER NAME.
NOTE: If you don’t want to enter the name, skip step 5.
5. Use the touch-tone pad on the handset to enter the name (up to 15 characters)
and press the memory button to save. More than one letter is stored in each of the
number keys. For example, to enter the name Bill Smith, press the 2 key twice for the
letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L.
Wait for one second. Press the 5 key 3 times for the second letter L. Press the 1 key
to insert a space between the L and the S. Press the 7 key 4 times for the letter S;
press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the
8 key for the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake press the chan/delete button to
backspace and erase the wrong character(s) or number(s).
6. Press the mem button to save the name. The display shows ENTER TEL NUMBR.
7. Use the touch-tone pad to enter the telephone number you want to store (up to
24 digits).
NOTE: The system treats PAUSES as delays or spaces in the dialing
sequence.
8. Press mem again to store the number. You will hear a confirmation tone.
Storing the Last Number Dialed
1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2. Press the redial button.
3. Press the mem button to store the number. You will hear a confirmation tone.
To replace an old number with a new redial number:
1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2. Press the redial button.
3. Press the mem button, and REPLACE MEMO? shows in the display.
4. Press the mem button again to replace the old number with the new number. You
will hear a confirmation tone.
Inserting a Pause in the Dialing Sequence of a
Stored Number
If a pause is needed to wait for a dial or access tone, press the #PAUSE button to insert
a delay in dialing sequence of a stored number (for example, after you dial 9 for an
outside line, or to wait for a computer access tone). Pause shows in the display as a P,
and each pause counts as one digit in the dialing sequence.
Changing a Stored Number
1. Repeat steps 1 through 7 in Storing a Name and Number in Memory.
2. Press the mem button, and REPLACE MEMO? shows in the display.
3. Press the mem button to store the number. You will hear a confirmation tone.
Reviewing and Deleting Stored Numbers
1. To review stored numbers, press the mem button, and use the vol/cid (- or +) button
to scroll to the memory location, or press the corresponding number key for a
desired memory location (0-9).
2. When the data shows in the display, press the chan/delete button. The display
shows DELETE? .
3. Press chan/delete again to delete the data. The display shows DELETED.
Dialing a Stored Number
1. Make sure the phone is ON by pressing the talk button.
2. Press the mem button.
3. Press the memory location (0-9). The number dials automatically.
- OR 1. Make sure the phone is OFF (not in TALK mode).
2. Press the mem button.
Display Messages
• Make sure the battery is properly charged (for 16 hours).
The following indicators show the status of a message or of the unit.
BLOCKED CALL
The person is calling from a number that has been
blocked from transmission.
• Ensure the battery pack is installed correctly.
• Did the handset beep when you pressed the talk button? Did the charge/in use
indicator come on? The battery may need to be charged.
• Place the handset in the base for at least 20 seconds.
BLOCKED NAME
The persons name is blocked from transmission.
BLOCKED NUMBER
The person is calling from a number that has been
blocked from transmission.
CALL WAITING
Indicates a call is waiting on the line.
4. Press the talk button. The number dials automatically.
DELETE ALL?
Prompt asking if you want to erase all Caller ID records.
Chain Dialing from Memory
DELETE CALL ID?
Prompt asking if you want to erase a Caller ID record.
DELETED
Prompt confirming the Caller ID record is erased.
• Check for a dial tone.
EMPTY
Indicates a memory location is vacant.
You experience static, noise, or fading in and out
END OF LIST
Indicates that there is no additional information in Caller
ID memory.
• Change channels.
3. Use the touch-tone pad or the vol/cid (- or +) button to scroll to the number you want
to dial.
Use this feature to make calls which require a sequence of numbers, such as calling
card calls to a frequently called long distance number. Each part of the sequence is
dialed from memory. The following example shows you how to use chain dialing to
make a call through a long distance service:
The Number For
Memory Location
Long distance access number
Authorization code
Frequently called long distance number
1. Make sure the phone is ON (in TALK mode).
This product may be serviced only by the manufacturer or its authorized service
Suggestiuon: “Make sure the
agents. Changes or modifications not expressly approved by Thomson Inc. could void
• Make sure the RINGER switch on the handset is turned ON. ringer button is set ON”
the user’s authority to operate this product. For instructions on how to obtain service,
• Move closer to the base. The handset may be out of range.
refer to the warranty included in this guide or call customer service at 1-800-448-0329.
• You may have too many extension phones on your line. Try unplugging some
Or refer inquiries to:
phones.
Thomson Inc.
• Move closer to base. The handset might be out of range.
ENTER NAME
Prompt telling you to enter the name for one of the 10
memory locations.
ENTER NUMBER
Prompt telling you to enter the telephone number for one
of the 10 memory locations.
INCOMPLETE DATA
Caller information has been interrupted during
transmission or the telephone line is excessively noisy.
Unit beeps
• Relocate the base. Make sure base is not plugged into an electrical outlet with
another household appliance.
• Charge the battery.
• Place handset in base for 20 seconds; if it still beeps, charge battery for 16 hours.
LOW BATTERY
Indicates the battery needs to be charged.
3. When you hear the access tone, press the mem button and then press 8.
• Clean the charging contacts on handset and base with a soft cloth.
NEW
Indicates call or calls have not been reviewed.
4. At the next access tone, press the mem button and then 9.
• See solutions for “No dial tone.”
NO CALLS
Indicates no calls have been received.
• Replace the battery.
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only
the Thomson Inc. approved Nickel-Cadmium (Ni-Cd) battery
model 5-2522, that is compatible with this unit.
1. Make sure the telephone is OFF (not in TALK mode) before you replace battery.
2. Remove the battery compartment door.
3. Disconnect the cord attached to the battery pack and remove the battery pack from
the handset.
NO DATA
No Caller ID information was received.
PAGING
The PAGE button has been pressed on the base.
PRESS TALK KEY
Indicates the CID number is a Direct Dial Number (DDN)
and cannot be formatted.
REPT
Repeat call message. Indicates that a new call from the
same number was received more than once.
UNKNOWN NAME/
CALLER/NUMBER
The incoming call is from an area not serviced by
Caller ID or the information was not sent.
Handset Sound Signals
Signal
Meaning
Memory Dialing doesn’t work
• Make sure you programmed the memory location keys correctly.
• Did you follow proper dialing sequence?
Phone dials in pulse with tone service
• Make sure phone is in tone dialing mode.
Phone won’t dial out with pulse service
• Make sure phone is in pulse dialing mode.
Causes of Poor Reception
4. Insert the new battery pack and connect the cord to the jack inside the battery
compartment.
A long warbling tone (with ringer on)
Signals an incoming call
• Aluminum siding.
5. Put the battery compartment door back on.
Three short beeps (several times)
Page signal
• Foil backing on insulation.
6. Place handset in the base to charge. Allow the handset battery to properly charge
(for 16 hours) prior to first use or when you install a new battery pack. If you do
not properly charge the phone, battery performance will be compromised.
Single beep every 7 seconds
Low battery warning
• Heating ducts and other metal construction that can shield radio signals.
Battery Safety Precautions
Troubleshooting Guide
• You’re too close to appliances such as microwaves, stoves, computers, etc.
• Atmospheric conditions, such as strong storms.
Caller ID Solutions
• Base is installed in the basement or lower floor of the house.
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type,
toxic materials could be released which can cause injury.
No Display
• Base is plugged into AC outlet with other electronic devices.
• The battery must be fully charged. Try replacing the battery.
• Baby monitor is using the same frequency.
• To reduce the risk of fire or personal injury, use only the Nickel-Cadmium battery
listed in the User’s Guide.
• Make sure that the unit is connected to a non-switched electrical outlet. Disconnect
the unit from the wall and plug it in again.
• Handset battery is low.
• Keep batteries out of the reach of children.
• You must be subscribed to Caller ID service from your local telephone company in
order to receive Caller ID records.
• Microwave oven is using the same frequency.
• Remove batteries if storing over 30 days.
Caller ID Error Message
NOTE: The RBRC seal on the battery used in your Thomson Inc. product
indicates that we are participating in a program to collect and recycle the
rechargeable battery (or batteries).
For more information go to the RBRC web site at www.rbrc.org
or call 1-800-8-BATTERY or contact a local recycling center.
• You’re out of range of the base.
General Product Care
• The unit displays this message if it detects anything other than valid Caller ID
information during the silent period after the first ring. This message indicates either
the presence of noise on the line, or that an invalid message has been sent from the
telephone company.
To keep your telephone working and looking good, follow these guidelines:
Cordless Phone Solutions
• Avoid dropping the unit and other rough treatment.
No dial tone
• Clean with a soft cloth.
• Check installation:
Make sure the base power cord is connected to a working electrical outlet.
• Never use a strong cleaning agent or abrasive powder because this will damage the
finish.
Make sure the telephone line cord is connected to the base unit and the wall phone
jack.
• Periodically clean the charge contacts on the handset and base with a soft cloth.
• Connect another phone to the same modular jack; if the second phone doesn’t work,
the problem might be with your wiring or local service.
• The handset may be out of range of the base. Move closer to the base.
If trouble is experienced with this equipment, for repair or warranty information, please
contact customer service at 1-800-448-0329. If the equipment is causing harm to
the telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
Handset does not ring
2. Press the mem button and then press 7.
TIP: Wait for the access tones before pressing the next mem button,
or your call may not go through.
Service
• Avoid putting the phone near heating appliances and devices that generate
electrical noise (for example, motors or fluorescent lamps).
• DO NOT expose to direct sunlight or moisture.
• Retain the original packaging in case you need to ship the phone at a later date.
Manager, Consumer Relations
P O Box 1976
Indianapolis, IN 46206
Attach your sales receipt to the guide for future reference or jot down the date this
product was purchased or received as a gift. This information will be valuable if service
should be required during the warranty period.
Purchase date ______________________________________________________
Name of store ______________________________________________________
Limited Warranty
Accessory Information
DESCRIPTION
What your warranty covers:
• Defects in materials or workmanship.
For how long after your purchase:
• One year, from date of purchase.
(The warranty period for rental units begins with the first rental or 45 days from date
of shipment to the rental firm, whichever comes first.)
What we will do:
• Provide you with a new or, at our option, a refurbished unit. The exchange unit is
under warranty for the remainder of the original product’s warranty period.
How you get service:
• Properly pack your unit. Include any cables, etc., which were originally provided with
the product. We recommend using the original carton and packing materials.
• ”Proof of purchase in the form of a bill of sale or receipted invoice which is evidence
that the product is within the warranty period, must be presented to obtain warranty
service.” For rental firms, proof of first rental is also required. Also print your name
and address and a description of the defect. Send via standard UPS or its equivalent
to:
Thomson Inc.
11721 B Alameda Ave.
Socorro, Texas 79927
• Pay any charges billed to you by the Exchange Center for service not covered by the
warranty.
• Insure your shipment for loss or damage. Thomson Inc. accepts no liability in case of
damage or loss.
• A new or refurbished unit will be shipped to you freight prepaid.
MODEL NO.
AC Power adaptor/black
5-2616
AC Power adaptor/gray
5-2617
Handset Replacement Battery
5-2522
To place order, have your Visa, MasterCard, or Discover Card ready
and call toll-free 1-800-338-0376.
A shipping and handling fee will be charged upon ordering.
We are required by law to collect appropriate sales tax for each individual state, country,
and locality to which the merchandise is being sent.
Items are subject to availability.
*Prices are subject to change without notice.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual provides information regarding
operating instructions and user controls. Any additional information, should be
obtained from your dealer.)
• Installation and setup service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning damage.
Product Registration:
• Please complete and mail the Product Registration Card packed with your unit. It will
make it easier to contact you should it ever be necessary. The return of the card is
not required for warranty coverage.
Limitation of Warranty:
• The warranty stated above is the only warranty applicable to this product. All other
warranties, express or implied (including all implied warranties of merchantability
or fitness for a particular purpose) are hereby disclaimed. No verbal or written
information given by Thomson Inc., its agents, or employees shall create a guaranty
or in any way increase the scope of this warranty.
• Repair or replacement as provided under this warranty is the exclusive remedy
of the consumer. Thomson Inc. shall not be liable for incidental or consequential
damages resulting from the use of this product or arising out of any breach of any
express or implied warranty on this product. This disclaimer of warranties and
limited warranty are governed by the laws of the state of Indiana. Except to the
extent prohibited by applicable law, any implied warranty of merchantability or
fitness for a particular purpose on this product is limited to the applicable warranty
period set forth above.
How state law relates to this warranty:
• Some states do not allow the exclusion nor limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts so the above
limitations or exclusions may not apply to you.
• This warranty gives you specific legal rights, and you also may have other rights that
vary from state to state.
If you purchased your product outside the USA:
• This warranty does not apply. Contact your dealer for warranty information.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1.1-111
About                           : 294f8a37-cdf7-11d9-b585-c9ea9041fb8d
Create Date                     : 2006:07:13 15:57:56+08:00
Metadata Date                   : 2006:07:13 15:58:09+08:00
Modify Date                     : 2006:07:13 15:58:09+08:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 7717 bytes, use -b option to extract)
Instance ID                     : uuid:53624c7d-1245-11db-a8d9-000a95991a8c
Document ID                     : adobe:docid:indd:66f35e18-8513-11da-9034-e3aa70382050
Rendition Class                 : proof:pdf
Derived From Instance ID        : d42597e0-84f5-11da-9034-e3aa70382050
Derived From Document ID        : adobe:docid:indd:21911825-7624-11d9-a396-c805ad227166
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:BB3D3DE313B511DBAAEFE2F975CF9E7A, uuid:87477B4D7EAA11DAA86EF64F084201D5, uuid:BB3D3DE513B511DBAAEFE2F975CF9E7A, uuid:BB3D3DE513B511DBAAEFE2F975CF9E7A, uuid:AAD7BB8E9E4711DA8CDE863A2D5231C0, uuid:ACEAE2EAC25311DABC32A3C12391C839
Manifest Reference Document ID  : uuid:BB3D3DE213B511DBAAEFE2F975CF9E7A, adobe:docid:indd:ed04e4fd-a9b0-11d9-8883-b20dcdbb4364, uuid:BB3D3DE413B511DBAAEFE2F975CF9E7A, uuid:BB3D3DE413B511DBAAEFE2F975CF9E7A, uuid:AAD7BB8D9E4711DA8CDE863A2D5231C0, uuid:ACEAE2E9C25311DABC32A3C12391C839
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0)

EXIF Metadata provided by EXIF.tools