Thomson 3-5810 Face Held Family Radio Transceiver User Manual User Instructions

Thomson Inc. Face Held Family Radio Transceiver User Instructions

User Instructions

Download: Thomson 3-5810 Face Held Family Radio Transceiver User Manual User Instructions
Mirror Download [FCC.gov]Thomson 3-5810 Face Held Family Radio Transceiver User Manual User Instructions
Document ID101671
Application ID+GQiGVZDDsCSOBekc9XpNg==
Document DescriptionUser Instructions
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize2.58kB (32257 bits)
Date Submitted2000-05-23 00:00:00
Date Available2000-06-07 00:00:00
Creation Date2000-05-23 16:54:06
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2000-05-23 16:54:07
Document TitleUser Instructions

FRS 35810 – User Instruction Guide (Buttons and Controls)
1)
Power Button
Press and hold button for 1 second to turn unit ON or OFF. The unit is
OFF when the entire display is blank.
2)
PTT Button
Press and hold button during transmission. Release button to receive
calls. The transmitter icon will be displayed for the duration of the
transmission.
3)
Page Button
Press to initiate transmission of an alert tone to other FRS radios tuned
to the same channel. The transmit icon will be displayed for the
duration of the transmission.
4)
Monitor Button
Press and hold button to listen for any activity on channel before
initiating a transmission.
Normal Mode Operation:
5)
Up Arrow Button
Press button to increment to next FRS channel. Counting up from
channel 14 will wrap around to channel 1. The new channel and its
corresponding CTCSS code will be shown on the display.
6)
Down Arrow Button
Press button to decrement to the previous FRS channel. Counting
down from channel 1 will wrap around to channel 14. The new
channel and its corresponding CTCSS code will be shown on the
display.
7)
Right Arrow Button
Press button to increase audio volume one step as shown on the volume
level bar graph. Maximum volume is reached when all segments of
the bar graph are displayed.
8)
Left Arrow Button
Press button to decrease audio volume one step as shown on the
volume level bar graph. Minimum volume is reached when all
segments of the bar graph are blank.
9)
Lock Button
Press and hold button for 1.5 seconds to “lock-out” all Feature
Programming modes and channel changing operations. Press and hold
button again for 1.5 seconds to “un-lock” condition.
10)
Mode Button
Press button to enter feature program mode. Press button again to
return to normal mode.
TriSquare Communications
Page 1
FRS 35810 – User Instruction Guide (Buttons and Controls)
Feature Programming Modes
CTCSS Code Programming
Temperature Display Programming
FRS Channel Programming
Feature Programming Operation:
1)
Right Arrow Button
Press button to switch to next Feature Programming submenu at any
time during feature selection.
2)
Left Arrow Button
Press button to switch to previous Feature Programming submenu at
any time during feature selection.
CTCSS Code Programming Mode:
(“CTCSS” indicator blinking)
1)
Up Arrow Button
Press button to increment CTCSS code. If incrementing from code 38,
the unit will switch to code 0 (displayed as “--“). Code 0 indicates no
CTCSS code selected and unit will receive all calls transmitted on the
current channel.
2)
Down Arrow Button
Press button to decrement CTCSS code. If decrementing from code 0,
the unit will switch to code 38.
Temperature Display Programming Mode:
(Degree F/Degree C indicator blinking)
1)
Up/Down Arrow Buttons Press either button to toggle temperature display mode between
Centigrade and Fahrenheit scales. The current temperature will be
displayed with the appropriate F or C for the selected scale.
FRS Channel Programming:
(FRS Channel number blinking)
1)
Up Arrow Button
Press button to increment to next FRS channel. Counting up from
channel 14 will wrap around to channel 1. The new channel and its
corresponding CTCSS code will be shown on the display.
2)
Down Arrow Button
Press button to decrement to the previous FRS channel. Counting
down from channel 1 will wrap around to channel 14. The new
channel and its corresponding CTCSS code will be shown on the
display.
Feature Programming Mode can be exited by pressing any of the Mode, PTT, Monitor, Page, PTT or
Power button, returning unit to Normal Operating Mode.
TriSquare Communications
Page 2
FRS 35810 – User Instruction Guide (Buttons and Controls)
Important Battery Information
•
•
•
•
•
Alkaline batteries are recommended for longer operation. Carbon-zinc or nickel cadmium
rechargeable batteries can substantially reduce battery life.
If you are not going to use your radio for a month or more, be sure to remove the batteries because
they can leak and damage the unit.
Dispose of batteries in the proper manner, according to federal, state, and local regulations.
Any battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly, if all
batteries are not replaced at the same time, if disposed of in fire, or if an attempt is made to charge
a battery not intended to be recharged.
Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal
injury.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
In accordance with FCC requirements, changes or modifications not expressly approved by Thomson
Consumer Electronics could void the user’s authority to operate this product.
This device generates and uses radio frequency (RF) energy, and if not installed and used properly, this
equipment may cause interference to radio and television reception. If this equipment does cause
interference to radio or television reception (which you can determine by turning the equipment off and
on), try to correct the interference by one or more of the following measures:
•
Reorient the receiving antenna (that is, the antenna for the radio or television that is “receiving”
the interference).
•
Move the unit away from the equipment that is receiving interference.
If these measures do not eliminate the interference, please consult your dealer or an experienced
radio/television technician for additional suggestions. Also, the Federal Communications Commission has
prepared a helpful booklet, “How To Identify and Resolve Radio TV Interference Problems.” This booklet
is available from the U.S. Government Printing Office, Washington, DC 20402. Please specify stock
number 004-000-00345-4 when ordering copies.
Service Information
This product should be serviced only by those specially trained in appropriate servicing techniques. For
instructions on how to obtain service, refer to the warranty included in this guide or call 1-800-448-0329.
Attach your sales receipt to the booklet for future reference, or jot down the date this product was
purchased or received as a gift. This information will be valuable if service should be required during the
warranty period.
Purchase Date__________________________
Name of Store__________________________
TriSquare Communications
Page 3
FRS 35810 – User Instruction Guide (Buttons and Controls)
Limited Warranty
What does our warranty cover?
•
Any defect in material or workmanship.
For how long after the original purchase?
•
One year.
•
The warranty for rental units begins with the first rental.
What will we do?
•
Provide you with a new, or at our option, a refurbished unit.
•
The exchange unit is warranted for the remainder of your product’s original one-year warranty
period.
How do you make a warranty claim?
•
Properly pack your unit. Include any cables, etc., which were originally provided with the product.
•
Include a copy of the sales receipt or other evidence of date of original purchase. If the unit was a
gift, provide a statement specifying the date received. Also, print your name and address, and a
description of the defect.
•
Ship the unit standard UPS or its equivalent to:
Thomson Consume r Electronics, Inc.
Product Exchange Center
11721 B Alame da Ave.
Socorro, Texas 79927
•
Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
•
A new or refurbished unit will be shipped to you prepaid freight.
What does your warranty not cover?
•
Customer instruction. Your Use and Care Guide provides information regarding the operating
instructions and user controls. For additional information, ask your dealer.
•
Installation and set-up service adjustments.
•
Batteries.
•
Damage from misuse or neglect.
•
Products that have been modified or incorporated into other products.
•
Product purchased or serviced outside the USA.
•
Acts of God, such as but not limited to lightning damage.
How does state law relate to this warranty?
•
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
What if you purchased your product outside of the United States?
•
This warranty does not apply. Contact your dealer for warranty information.
TriSquare Communications
Page 4

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2000:05:23 16:54:06
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2000:05:23 16:54:07-04:00
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: G9H3-5810

Navigation menu