Tiger Poo Chi Bulldog Users Manual

Poo-Chi Bulldog Poo-Chi_Bulldog

Bulldog to the manual ee2d487f-f9a8-4e1f-b45b-22d149b58676

: Tiger Tiger-Poo-Chi-Bulldog-Users-Manual-486039 tiger-poo-chi-bulldog-users-manual-486039 tiger pdf

Open the PDF directly: View PDF .
Page Count: 2

TM

TM

Bulldog should be played indoors.

SET UP

Your Poo-Chi Friend will play the best on a smooth, flat surface. Make certain

that the area is clear of obstacles so he can stand, sit and dance on his tiptoes!

SENSORS

Your Poo-Chi Friend is very unpredictable. Activate one of his sensors to see

what he will do! He has three sensors: a light sensor in his eyes, sound sensor

and touch sensor on his head.

YOUR POO-CHI FRIEND’S EYES

Bulldog’s eyes are very expressive. Bulldog’s eyes will tell you if he is happy,

sad, sleepy and that he loves you! Bulldog can even blink!

BULLDOG’S BIORHYTHM

Graphs shown below represent the 8 biorhythm levels of your Poo-Chi Friend,

Bulldog. Each level lasts about 30 minutes and determines his feelings and

behavior. For example, when Bulldog is in level 1 he will be unhappy most of

the time, and will probably have sad eyes. In level 8, he will be happy almost

all of the time, and will sing you special songs!

Remember: If he is sad, it’s very easy to make him happy again by playing

with him. Don’t forget, Bulldog has three different sensors that need attention!

(Refer to the SENSORS section).

Level 1: Bulldog is very unhappy and needs much care and affection.

Level 2: Bulldog is still sad, maybe feeding Bulldog his bone will help!

Level 3: Remember to watch Bulldog's eyes, they tell you how he feels.

Level 4: Getting happier, Bulldog loves to be petted!

Level 5: Bulldog hears when you clap or say "Good Dog!"

Level 6 (Home position): Bulldog starts at this level when reset.

Level 7: Bulldog's very happy, he might even sing you a special song!

Level 8: Congratulations on being a World Class Bulldog Owner,

watch for his special tricks!

BATTERY INSTALLATION

IMPORTANT: Battery installation should be done

by an adult. Always install the batteries correctly

according to the positive (+) and negative (-) signs

on the batteries.

1. Unscrew and remove the battery compartment

door on the back of Bulldog’s head.

2. Insert 3 “AAA”/LR03 batteries as shown inside

the battery compartment.

3. Attach the battery compartment door and fasten the screw.

4. Press the RESET button located on the right side of Bulldog’s

head (see RESET section for more details).

* Do not dispose of batteries in fire, batteries may explode or leak.

NOTE: Your Poo-Chi Friend will begin to move as soon as you install the

batteries. There is no ON/OFF switch. To turn the unit off, either remove the

batteries or see the section entitled “SLEEPING.”

HELPFUL TIP: Your Poo-Chi Friend is a mechanical, robotic toy. The mechanical

sound you hear when it moves is normal.

To ensure proper function:

- Do not mix old and new batteries.

- Do not mix alkaline, standard or rechargeable batteries.

- Battery installation should be done by an adult.

- Non-rechargeable batteries are not to be recharged.

- Rechargeable batteries are to be removed from the toy before

being charged (if removable).

- Rechargeable batteries are only to be charged under adult supervision.

(if removable).

- Only batteries of the same or equivalent type as recommended are to be used.

- Batteries are to be inserted with the correct polarity.

- Exhausted batteries are to be removed from the toy.

- The supply terminals are not to be short-circuited.

- Replace with new batteries at the first sign of erratic operation.

CAUTION:

- As with all small batteries, the batteries used

with this toy should be kept away from small

children who still put things in their mouths. If

they are swallowed, promptly see a doctor and

have the doctor phone (202) 625-3333 collect.

- Make sure the batteries are inserted correctly

and follow the toy and battery manufacturer's

instructions.

Bulldog, the interactive puppy, is a new type of friend! He expresses his

emotions through his bright expressive eyes, flapping ears and wagging tail.

Enjoy hours of playful singing, fun dancing and real puppy sounds. He uses

advanced technology to create realistic emotional responses that adapt and

change as you play with him. The more you play with him, the happier he

becomes – he may even sing a special song for you!

CHECKLIST

The following items are included in this package:

1 – Bulldog, the Interactive puppy

1 – Bulldog’s bone

1 – Instruction manual If anything is missing, please contact

the Tiger Electronics’ Customer

Service department and they will

send you the missing item.

Happy

UnhappyUnhappy

Happy

UnhappyUnhappy

Happy

UnhappyUnhappy

Happy

UnhappyUnhappy

Happy

Unhappy

Happy

Happy

Unhappy

Happy

Happy

Unhappy

To activate the LIGHT sensor:

-WAIT until he stops moving.

-Slowly pass your hand in front of his nose.

-When you move your hand away from his nose,

he will respond.

To activate the SOUND sensor:

-WAIT until he stops moving

- Clap your hands or make a loud noise,

Bulldog will respond.

To activate the TOUCH sensor:

-WAIT until he stops moving

-Simply press the button on top of Bulldog’s

head. If you press the head button once, Bulldog

will respond. If you press the head button twice,

he will respond in a different way.

All Poo-Chi Friends love to play and be happy.

Ages 4 and up

TOUCH

SENSOR LIGHT

SENSOR

SOUND

SENSOR

BULLDOG’S

BONE

Happy

Unhappy

Very Happy Bulldog Happy Bulldog Sad Bulldog Blinking Bulldog

®, TM, & © 2001 Tiger Electronics, Ltd. All Rights Reserved.

980 Woodlands Parkway, Vernon Hills, Illinois 60061, U.S.A.

®, TM, & © 2001 Tiger Electronics UK Ltd. All Rights Reserved.

Belvedere House, Victoria Avenue, Harrogate, North Yorkshire, United Kingdom HG1 1EL.

© SEGA TOYS 2001

PRINTED IN CHINA

YOUR POO-CHI FRIEND’S BONE

Your Poo-Chi Friend loves to be cared for and the more you take care of him,

the happier he will be. Feed Bulldog by holding the bone so that the name on

the bone is facing the dog during feeding. Hold the bone centered in front of

his mouth. Bulldog will respond with happy eyes,

wagging tail and a special eating sound.

- Do not place the bone INSIDE of his mouth –

hold the bone in front of Bulldog’s mouth to

simulate feeding. Bulldog’s bone does NOT

require batteries. Do not attempt to open

the bone.

- Avoid placing the bone close to any magnetic-

sensitive object like a cassette tape, video tape,

magnetic disk, credit card, etc.

WARNING: Bulldog’s bone is a toy. Bulldog’s bone

is not intended for use by a live dog.

LISTEN TO A SONG

To listen to one of Bulldog’s favorite songs, please follow the sequence below:

1. Wait until Bulldog stops moving.

2. Hold your hand completely over

Bulldog’s nose.

3. While still holding your hand over Bulldog’s

nose, press the head button 5 times

quickly (you must press the head button

5 times within 2 seconds).

4. Wait until you hear 3 short beeps, remove

your hand, then quickly press the head

button again for 1 – 6 times and you will

hear a different song for each number

of beeps.

5. After each song is finished, Bulldog will

return to his normal mode.

To hear another song, begin with Step 1 above.

SLEEPING

Because Bulldog is a puppy, he needs his sleep. Just like a real puppy, he will

fall asleep when it is dark or when no one is playing with him. When Bulldog

gets tired, he will sit down and his eyes will flash and close. You may even

hear a little snore!

Sometimes it takes Bulldog a long time to fall asleep. First, he will make noises

to try to get your attention. His eyes may even start to flash depending on his

mood. If he doesn’t get your attention after 6 minutes, he will sit down and

snore. If he still doesn’t get your attention after the snoring, he will fall into a

deep sleep.

To wake up Bulldog when he is in a deep sleep, press his head button. If

Bulldog was sad when he fell asleep, it may take him a little while to completely

wake up so you may need to press his head button more than once. If he was

happy when he fell asleep, he will quickly wake up.

COMMUNICATING WITH OTHER

ROBO-CHI™ PETS

Bulldog will communicate with other Poo-Chi Friends and Robo-Chi pets. To

begin communication, please follow the sequence below:

1. Place the two animals so they face each other and are approximately

6” – 12” apart.

2. Wait for both creatures to stop moving.

3. Press the head button ONCE on BOTH CREATURES at the SAME TIME.

4. The dogs will begin to speak. If they like each other, they will sing a song

together. If they don’t like each other they will growl at one another.

5. Both will automatically return to normal play mode after they communicate

for approximately 2 minutes.

6. If you want the animals to communicate again, begin with Step 1 above.

RESET

Press the RESET button only if Bulldog’s movements seem to be malfunctioning.

The RESET button is located on the right side of

Bulldog’s head. Press the RESET button once with

a ball-point pen. Do not press the RESET button

with any sharp instrument.

TROUBLESHOOTING

Your Poo-Chi Friend is designed to provide hours of fun play. If his actions

become erratic and you are having trouble, check to make certain that Bulldog

has fresh batteries and then call Tiger Electronics’ Customer Service Department

at 1-800-844-3733

If you can’t see Bulldog’s eyes, he may be asleep (see section entitled

“SLEEPING”) or check to make certain there are fresh batteries.

You can wake up Bulldog by pressing the head sensor. If he was sad when

he fell asleep, it may take multiple head presses to wake up Bulldog. If he

was happy when he fell asleep, it will be easier to wake him up.

To wake up Bulldog when he is snoring, hold his special bone in front of his

mouth or press his head button.

For more information about Tiger Electronics, our products and special

promotions, please visit our web site at: www.tigertoys.com.

90-DAY LIMITED WARRANTY

Tiger Electronics,Ltd. (TIGER) warrants to the original consumer purchaser of this

product that the product will be free from defects in materials or workmanship for 90

days from the date of original purchase. This warranty does not cover damages

resulting from accident, negligence, improper service or use or other causes not

arising out of defects in materials or workmanship.

During this 90-day warranty period, the product will either be repaired or replaced

(at TIGER'S option) without charge to the purchaser, when returned with proof of

the date of purchase to either the dealer or to TIGER.

Product returned to TIGER without proof of the date of purchase or after the 90-day

warranty period has expired, but prior to one year from the original date of purchase,

will be repaired or replaced (at TIGER'S option) for a service fee of US$17.00.

Payments must be by check or money order payable to Tiger Electronics, Ltd.

THE FOREGOING STATES THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY

FOR ANY BREACH OF WARRANTY WITH RESPECT TO THE PRODUCT.

All product returned must be shipped prepaid and insured for loss or damage to:

TIGER REPAIR DEPARTMENT

1000 N. Butterfield Road, Unit 1023

Vernon Hills, IL 60061, U.S.A.

The product should be carefully packed in the original box or other packing materials

sufficient to avoid damage during shipment. Include a complete written description

of the defect, a check if product is beyond the 90-day warranty period, and your

printed name, address and telephone number.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER

REPRESENTATIONS OR CLAIMS OF ANY NATURE SHALL BE BINDING ON OR

OBLIGATE TIGER IN ANY WAY. ANY IMPLIED WARRANTIES APPLICABLE TO

THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE NINETY (90) DAY PERIOD

DESCRIBED ABOVE. IN NO EVENT WILL TIGER BE LIABLE FOR ANY SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM POSSESSION,

USE, OR MALFUNCTION OF THIS TIGER PRODUCT.

Some states do not allow limitations as to how long an implied warranty lasts and/or

exclusions or limitations of incidental or consequential damages, so the above

limitations and/or exclusions of liability may not apply to you. This warranty gives

you specific rights, and you may also have other rights which vary from state to state.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions :

(1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio TV technician for help.

CLEANING INSTRUCTIONS

Clean only with a piece of

soft dry cloth.

High temperature will

destroy the unit.

Do not leave unit in direct

sunlight.

TM

200102960IWTI-01

A division of Hasbro, Inc.

RESET

BUTTON