TimeKeeping Systems 0003 Wearable Positioning Device User Manual
TimeKeeping Systems Inc Wearable Positioning Device
User Manual
© 2017 by TimeKeeping Systems, Inc.
www.guard1.com
GUARD1/tracking
Wristband Tag with NFC
© 2017 by TimeKeeping Systems, Inc.
www.guard1.com
© 2017 by TimeKeeping Systems, Inc.
www.guard1.com
The Guard1 Tracking Wristband Tag with NFC (Model TAG-003, FCC ID MTD-0003) is a completely sealed
and reusable device with a long-life battery. It is worn on the wrist of individuals to be tracked within
facilities utilizing the Guard1 Tracking system.
To use Guard1 Tracking Wristband Tags you will need:
One-time use Guard1 Tracking Wristband Material
o Roll of 200 feet
or
o Precut Guard1 Tracking Wristband Strap
Guard1 Tracking Wristband Clasp Kit
Guard1 Tracking Wristband Clasp Crimping Tool
Guard1 Tracking NFC Software running on a PC or mobile device
A NFC Reader (if Guard1 Tracking NFC Software is running on a PC)
Instructions:
To apply a Guard1 Tracking Wristband Tag to an individual, please refer to the application
instructions provided with the wristband material, clasp kit, and crimping tool.
It is also possible to use the Guard1 Tracking Wristband Tags with third party wristbands. Please
refer to the manufacturer’s instructions.
To remove the Guard1 Tracking Wristband Tag, cut the wristband. The Guard1 Tracking
Wristband Tag may be reused during the useful life of the battery.
The Guard1 Tracking Wristband Tag is NFC compatible using proprietary Guard1 software. Using
the Guard1 Tracking NFC Software and a NFC Reader you can send and receive simple
commands to and from the tag. This allows the user to modify tag settings and retrieve
information stored on the tag quickly and easily. Simply follow the software’s instructions and
tap the tag to a NFC reader connected to a supported PC or mobile device.
© 2017 by TimeKeeping Systems, Inc.
www.guard1.com
FCC Statements:
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by TimeKeeping Systems, Inc. could void the user's
authority to operate the equipment.
This device is exempt from SAR Evaluation, per §4.3.1 of KDB 447498.
Industry Canada Statements:
English
French
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
This device is exempt from SAR Evaluation, per
RSS-102 §2.5.1.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le
fonctionnement.
Cet appareil est exempt de l'évaluation SAR, selon
RSS-102 §2.5.1.