Timex Group USA TMXM053 M053 - Ironman Classic 50 Move+ User Manual TIMEX M053

Timex Group USA, Inc. M053 - Ironman Classic 50 Move+ TIMEX M053

Contents

TIMEX M053-User Manual

WELCOME
Congratulations on the purchase of your
TIMEX® IRONMAN® Classic 50 Move+! In this
Quick Start Guide we will introduce you to your
new device and walk you through the first steps
in starting to use your Classic 50 Move+. We
designed the TIMEX® IRONMAN® Classic 50
Move+ so that it can be used by itself, but you’ll
get even more out of it when you use it with the
free TIMEX Connected mobile app (available on
iTunes and Google Play).
TIMEX CONNECTED MOBILE APP
View your Chrono Workouts, Interval
Workouts & All-Day Activity data in one
convenient location
Loads appointment reminders to your
Classic 50 Move+
Set three independent goals (steps,
distance and calorie burn) and track
your progress against those goals
Access and adjust watch settings
Upload data to your favorite training
sites
Download the full Owner’s Manual and the
latest version of this Quick Start Guide at:
www.timex.com/classic50move.
TIMEX® IRONMAN® CLASSIC 50 MOVE+
With an integrated 3D accelerometer, the
Classic 50 Move+ not only provides the classic
TIMEX timing functions you have grown to love
(Indiglo® night-light, stopwatch/chrono,
intervals, multiple alarms and hourly chimes),
but your Classic 50 Move+ will also provide you
with all-day activity tracking (steps, distance
moved and calories burned).
GET TO KNOW YOUR CLASSIC 50 MOVE+
Browse through the menu options by pushing
the Mode button. If additional pages are
available, flags will illuminate next to the
appropriate buttons. Push the Mode button to
exit out of settings or back out of menus to the
Time of Day screen.
GET STARTED
Your Classic 50 Move+ was designed to be used
with the free TIMEX Connected app; for easy
watch setup please install the TIMEX Connected
mobile app on a compatible device and connect
your new Classic 50 Move+. If you are in a
hurry for your first activity with your Classic 50
Move+, let’s walk through a quick setup to get
you going:
SETTING THE TIME/DATE
1. From the Time of Day screen, press and
hold the Set/Recall button.
2. Push the Start/Split button to select
first or second time zone.
3. Push the Mode button, use the
Start/Split and/or Stop/Reset buttons to
adjust the hours digits (pay attention to
the AM/PM designation).
4. Repeat Step 3 to adjust the minutes,
seconds, month, day, year, 12 or 24
hour and date formats.
5. Push the Set/Recall button when done
to confirm and exit or push the
Start/Split button to change to Time 2
settings.
NOTES:
Setting the Time/Date manually on the
watch will automatically turn on the all-
day activity tracking function.
When on Time of Day screen, press and
hold the Start/Split button to peek at
the second time zone.
QUICK VIEW OF ALL-DAY ACTIVITY DATA
Your all-day activity data is always easily
accessible from the Time of Day screen. Simply
tap the Stop/Reset button to scroll through the
available data.
Steps>Distance>Calories Burned>Date
TRAINING WITH YOUR CLASSIC 50 MOVE+
While using the Chrono and/or Interval
Workout functions, your Classic 50 Move+ uses
the built-in 3D accelerometer to provide steps,
distance and calorie expenditure information.
1. From the Time of Day screen, push the
Mode button until you see CHRONO.
2. Push the Start/Split button to start the
workout.
3. To take a split, push the Start/Split
button. Lap and split times will be
displayed with the lap number.
4. Repeatedly pushing the Set/Recall
button during the workout will display
the following data (lap timer, steps,
distance and calorie expenditure) on
the top banner.
5. To stop or to pause the workout, push
the Stop/Reset button.
6. To resume the workout, push the
Start/Split button.
7. After completing the workout, push the
Stop/Reset button to stop the workout.
8. Push and hold the Set/Recall button to
save the workout or push and hold the
Stop/Reset button to discard the
workout.
FCC Notice (U.S.) / IC Notice (Canada)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada.
To reduce potential radio interference to other
users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for
successful communication.
Conformément à la réglementation d'Industrie
Canada, le présent émetteur radio peut fonctionner
avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie
Canada.
Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il
faut choisir le type d'antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the
equipment and receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced
radio/TV technician for help.
DECLARATION OF CONFORMITY
Manufacturers Name: Timex Group USA, Inc.
Manufacturers Address:
555 Christian Road
Middlebury, CT 06762
United States of America
Declares that the product:
Product Name:
Timex® Ironman® Classic 50 Move+
Model Numbers: M049 & M053
Conforms to the following specifications:
RED: 2014/53/EU
Standards:
ETSI EN 301 489-1
ETSI EN 301 489-3 and -17 (EMC)
ETSI EN 300 440-2 (Bluetooth)
ETSI EN 300 330-2 (NFC)
LVD: 2006/95/EC
Standards:
IEC 60950-1
Digital Device Emissions
Standards
FCC 47CFR 15C (Bluetooth & NFC)
FCC 47CFR 15B Unintentional Radiators
IC RSS 210
IC RSS-GEN
Agent: —————————————————
Sam Everett
Quality Regulatory Engineer
Date: 20 January, 2015,
Middlebury, Connecticut, U.S.A.
©2015 Timex Group USA, Inc. TIMEX and
INDIGLO are registered trademarks of Timex
Group B.V. and its subsidiaries. IRONMAN® and
MDOT are registered trademarks of World
Triathlon Corporation. Used here by
permission.

Navigation menu